Pinning an afternoon stop sorted that one and left the hotel it was booked around
sitting behind it. The day's auto-sort reads each stop's own hour, and a booked
night has none: nobody types a time into a hotel row, they type a check-in, and
that lives on the booking. It counts now, so the night moves with everything else
instead of staying where it was dropped.
The assignments e2e builds its own tables and had neither the accommodation
column nor day_accommodations, so every create in that file 500'd as soon as the
insert learned to carry a booking id. Both are there now.
And the shared lint, which is stricter than the other two and which I had not run:
three leftovers from taking the check-out out of the chain, none of them used any
more.
It is the hour a room becomes available. Reaching it later is reaching it; only a
time somebody pinned to a stop can be missed. Read as an anchor it did the exact
opposite of what it means: arrive at 16:14 at a hotel that checks in from 11:00
and the rail reported five hours fourteen late, then read that 11:00 as earlier
than the 15:00 before it, took it for a new day and pushed the hotel onto
tomorrow. The day it came from was left with one stop and dropped out of the list
altogether, so the stop before it appeared to vanish.
The schedule now takes it as a floor: waited for when the drive gets there first,
and otherwise silent. Waiting still prints in ink, because the hour is one
somebody named; arriving late to it prints as computed, because nothing was
decided.
Same shape of mistake as the check-out, from the other side. One says the earliest
you may be somewhere, the other the latest you may still be — neither says when
you drive.
With daily travel times set, a stay was spent only against the hours the window
is open. Twenty-four hours then took two of them to run down: a single night
ended on the day after next, and every stop behind it moved with it.
Night time is time. The hours between one window closing and the next opening now
count towards the stay, so a night that starts just after eight is over just after
eight the next morning and the day carries on from there. An eleven-hour visit
from eight is over at seven in the evening rather than saving its last hour for
tomorrow — the traveller is still there after the driving stops, they simply do
not drive on until the window opens again.
Three things the day boundary was swallowing, all from the same stay.
The stop after it stayed on yesterday. It is reached a full day later but at a
later reading on the clock, and the only rule watching for a new day was "the
clock went backwards" — which that never does. The schedule's own count knows,
as long as it is read as a difference: a day whose first arrivals came out
negative is lifted whole, and reading the lifted offsets raw once moved an early
stop to tomorrow while leaving the late one behind. It now crosses over properly,
marked as having set off the day before.
The morning after started at the exact minute the stay ended, as if the road to
the first stop took no time. The carried minute is a departure; the drive from
there is added to it.
And that drive was invisible. It was on the map and in the day's total, but the
rail jumped straight to a stop at 08:11 after a stay that ended at 08:00. It gets
the same band any other drive gets, above the stop it arrives at — except where a
stop crossed over, which already draws that road under its own block.
A check-out is the LATEST the room has to be handed back, never the earliest
anybody may drive on, so it says nothing the chain can use. It shaped four things
it had no business shaping: the departure the day was built from, the length the
rail printed for a booked night, a day-selector and a clock field in the stop
dialog, and the branch that sent a night's STAY badge to the booking form because
its length was not editable here. All four go. The booking keeps its check-out;
it is a booking detail and lives under Days, where it is entered.
What replaces it is the thing that was always the honest answer: how long you
stand there. That is the traveller's own statement rather than a deadline, and a
stay running past midnight now carries the clock into the morning after — a stop
pinned before it ends keeps its hour and collects the late finding, as it would
from any leg it cannot make. A stay spanning whole days walks the clock forward
over them. An ordinary evening hands on nothing: the night between two days is
not a wait somebody is serving out.
The stay dialog goes to a full day rather than four hours, since it is now the
only place a night is given its hours, and offers eight and twelve as presets.
Every stop answers the same question the same way.
Overlay panels lose the skeleton placeholder. It was drawn in the page flow, so
the first time each dialog was ever opened a pale block flashed under the planner
and never again once its chunk was cached.
This reverts commit d4677bdea, and keeps the departure chip's icon.
The premise was wrong. A check-out is the LATEST moment the room has to be
handed back, not the earliest one you may leave: whoever wants to set off at
seven checks out before that or leaves the bags at the desk. Reading it as a
floor turned a perfectly good plan into a finding, and no amount of wording
around that would have made it true.
The chip keeps the door-out mark. That part says what it always said, only in a
symbol that is not a second clock face beside the arrival.
Every day was scheduled from nothing, so a booking that runs into the next day
ended at midnight as far as the chain was concerned. Check in at 08:00 and out
at 08:00 the next day, and the rail was happy to put you somewhere else at 07:00
that morning, with no sign that the room was still yours.
The day a check-out falls in now starts at the check-out rather than at nothing.
A floor, never a move: a stop with a clock of its own keeps it and collects the
late finding any leg it cannot make in time would give it, so a plan that says
07:00 still says 07:00 and merely admits it does not add up. A stop with no clock
starts at the check-out instead of having no time at all.
Only that one day. A stay running Monday to Thursday leaves Tuesday and Wednesday
alone, because you sleep there, you do not sit there.
The departure chip takes the door-out mark instead of a clock face. Beside an
arrival time, a second clock read as a second arrival.
The rail prints an hour in ink when a person picked it and in grey when the chain
worked it out. Every scheduler anchors on `time ?? checkInTime`, so a booked night
starts its day on the check-in exactly the way a pinned stop does — but two of the
three then asked only about `time` when labelling the result, and printed that
chosen hour grey.
The answer lived in three places and two of them disagreed with the anchor they
had just used, so it is one function now. Nothing but the rail reads the flag.
Only visible since a booked night became a stop of its own; before that no stop
carried a check-in.
Three things the first pass got wrong.
A stop a booking puts on the day is for road trip mode, which needs the
hotel in the driving chain. The day planner already shows that booking as
its own overnight block, so the row there would be the same hotel twice.
It is hidden in Days whatever the service-stop switch says, and the switch
goes back to meaning what it says: the petrol stations the traveller added.
Cancelling a night from the road trip popup took the stop with it. That
control means "this is a pause now, not a night", and the stop sits
mid-drive where re-adding it would land it at the end of the day. The
booking now hands the stop over instead of deleting it.
Moving a booking whose stop belongs to the traveller put a second one on
the new day and left the first behind, which is the duplicate this change
exists to remove. Only a booking's own stop moves now. Stays booked before
this shipped get theirs from the migration, not from the next edit they
happen to receive.
The trip planner and the journal get a "From Dawarich" list: the stays
recorded for those dates, each one a row that can be dismissed or turned
into a place or an entry after a review step that shows time, name, note
and day. A place that came from a recording carries the Dawarich mark
next to its name so its origin stays visible afterwards.
The recorded route lies over the trip and journal maps as an overlay,
coloured per day and cut along the reader's own timezone rather than
UTC. It is fetched for the window on screen and never stored.
The Atlas gets its own panel beside the map for the countries and cities
the recordings prove, and the wish list is ticked off there, on the day
of the visit, undoably. The phone has its own take on all of it, in the
mobile shell's colours and with native sheets.
A new `integrations/dawarich` domain behind its own addon. Each reader
connects their own instance; the API key is encrypted at rest and never
returned. Nothing is written back to Dawarich, and no raw position is
kept in TREK: the recorded route is fetched per request for the window
being looked at and thrown away again.
What it produces are suggestions, never facts. A recorded stay becomes a
proposed place or journal entry, a country or city becomes a proposed
Atlas mark, and a stay near a wish becomes a proposed tick-off; each one
waits for the reader to confirm it. Identity is (user, Dawarich visit),
so a second sync neither duplicates nor overwrites what was accepted,
and deleting the result puts the suggestion back on the list.
The sync runs as a job on the central scheduler, one user at a time,
guarded against overlapping runs.
A key could only ever read everything a user owns. When a second service
reads TREK on that user's behalf, that is more than it needs: Dawarich
wants trips, days and places, not notes, bookings or the wish list.
Keys can now be minted with an explicit list of areas, checked in the
guard and shown when the key is listed. Keys that existed before this
keep full read access, so nothing that works today stops working. A key
marked as limited whose list cannot be read grants nothing rather than
everything.
Zod schemas for the Dawarich integration: connection settings, the
suggestion list and its accept payloads, the recorded-track window and
the Atlas country/city proposals. Places gain an optional `source` so a
place that came out of a recording can say so.
An Amap row now carries the same source mark the TREK index, OpenStreetMap
and Google rows get, named per locale because 高德地图 is the name it goes
by where it matters. The "search is on OpenStreetMap" notices and the
key hint in the details column are gone with the keys dev had already
removed, and the client-side provider mirror with them.
amap_poi_id travels with a picked result into the form, the details
column and the shadow log, so a saved place keeps the id it was found
by. A pasted Amap link goes to the resolver like a Google one.
The provider produced amap_poi_id, but nothing stored it, so a saved
Amap place could never be reopened against Amap. The column now travels
with google_place_id and osm_id through the shared contract, the place
insert and update, duplicate matching, the assignment projections, the
trip copy and the three place MCP tools.
The three figures under a traveler's final budget came from the server, netted
in integer trip cents at the rate frozen on each expense. The rows listed under
them did not: both shells converted the expense list again with whatever live
rate they had, and with none loaded yet (first render, offline) the raw foreign
amount went out under the display currency's symbol. On any trip with a
foreign-currency expense the rows could not add up to the line above them.
The settlement response now carries the rows with the figure: `sources` on each
finalBudgets entry lists what the person fronted per expense, the recorded
transfers on their side and the open flows, in display cents. They are filled
by the same two loops that fill the totals, so an expense with no split members
stays out of them as it stays out of the ledger, and each list is spread over its
figure's already allocated cents with the same largest-remainder split, so the
sum is exact in every display currency. The shells print those cents and only
resolve names; the rows carry the sign of the line they sit under.
"Reimbursements received" was written from the receiver's chair: the traveler who sent a payment saw it as a plus under a label claiming they had received something. The line is net of both directions, so its label now says so in every locale.
The settle-up view says who owes whom, but nothing on the Costs screen
answers "what did the trip cost me": the balances move every time a
payment is recorded, and the tiles only describe the signed-in user.
The settlement response now carries finalBudgets, one row per participant
in the ledger: expenses (what they fronted on split expenses), reimbursed
(recorded transfers, received minus sent), pending (their current
balance) and final = expenses - reimbursed - pending.
- Computed in calculateSettlement from the same integer trip cents as the
balances, filled by the same loops, so the breakdown can never
contradict the balance printed next to it. Each component is converted
to the display currency as its own set and the final is subtracted in
display cents, so the three lines add up to the total in any currency.
- A "Final budget" card on desktop, the narrow desktop layout and the
mobile Costs tab: one amount per traveler, and a tap opens the three
lines plus the expenses, transfers and open flows behind them. The
filtering lives in CostsPanel.helpers so both shells share it.
- Contract in shared (budgetParticipantFinalSchema); the MCP
get_settlement_summary description mentions the new field it returns.
- Four new costs.* keys, translated in every locale.
The settle-up form only exposed from/to/amount and silently dated the
payment by created_at, unlike a regular expense which has an editable
date. Add a settled_at column (independent of created_at, same split as
expense_date) through the schema, migration, service, REST and MCP
surfaces, and the desktop + mobile forms; the ledger groups a payment by
settled_at, falling back to created_at for rows recorded before the
column existed.
Sharing a list works between people on the same TREK. This is the other
case: giving one to somebody who runs their own, or keeping a copy. Export
sits beside Edit and Share in the list header and downloads the open list;
Import sits beside New list in the rail, reads a file, shows what is in it
and makes a new list of it. Desktop only, which the route already decides.
What travels is what somebody wrote down: the list's name, colour and
description, its labels, and each place with its address, coordinates,
notes, status, contact details, category name and labels. A file is dull
JSON on purpose, so it can be read and edited by a person.
What does not travel is everything that only means something on the instance
it came from. Ids of every kind, since the receiver issues its own and a
category crosses over by name. Star ratings and members, because a rating is
an opinion somebody gave the people on that list. Provenance into trips,
which points at rows the receiver cannot see. And an image path under
/uploads, which resolves on the sender's server: only an absolute https URL
survives.
A file is a stranger's JSON and is read as one. It is parsed in the browser
that chose it and never uploaded; the parsed list goes through the same
contract on both sides; and a link that is not http(s) arrives as nothing
rather than as an anchor. Strict where it must refuse, forgiving where it
can drop: a file that does not say what it is never reaches the importer,
while one unreadable place inside it is skipped and counted, and one bad
field on a good place costs that field alone.
An import is always a new list. Importing into an existing one would mean
deciding what happens to a place that is already there, and every answer to
that is a merge nobody asked for.
A new book was a cover, a spread and a back cover, so it opened straight
onto pages 2 and 3. A bound book does not: the inside of the cover is
blank, and the first thing facing the reader is a single right-hand page,
page 1. The same at the end, where a single left-hand page sits before the
back cover. Both are laid down now, empty, in a new book and in a laid-out
one, and they are fixed the way the covers are: an inner spread only ever
goes between them.
The page numbers follow. They were counted from a spread's position in the
array, which assumed the spread after the cover was the first, and three
places did that sum on their own. One function now counts along the book,
one page for a single leaf and two for a spread, so the sheet on screen and
the label in the print view and the folio on the page all say the same
number. A book with a first page starts at 1; a book from before the first
page existed has none and keeps the numbers it always had.
TREK searches its own place index and OpenStreetMap. Neither carries a rating,
so "the best rated hotel around here" has never been answerable, and an operator
with a better index for their region had no way to reach the search box at all.
The searchProvider hook is that way in: a plugin is handed the query, a limit,
the language and the coordinate the search is biased toward, and answers with
places in the same shape the core search returns, plus a rating.
It sits beside the core search rather than inside it. The plugin runtime already
imports PlacesModule, which imports MapsModule, so asking the providers from the
maps service would close a module cycle — the same reason the other fourteen
contribution controllers stand next to what they contribute to. The client asks
both at once and merges, at the single point every caller already goes through,
so all nine search surfaces get plugin hits without knowing the hook exists.
A plugin index may never hold up the list: the client stops waiting at two and a
half seconds and the host gives a provider two, which is also why the budget is
the shortest of any hook here. With no such plugin installed the route answers
without reaching the runtime at all.
Every hit is normalized host-side and shared by the REST route and the MCP tool,
so a cap that holds for the browser holds for the assistant: coordinates are
range-checked, strings capped, the rating clamped to 0..5, a website must be
http or https, and ids are namespaced so they can never collide with an OSM one.
search_places_via_plugins is the MCP half, because what the user can see the
assistant has to be able to see; search_place now points at it.
Two people shaping one drive were each editing their own copy: a via dragged on
one screen reached the other only on the next reload, and the route it changed
looked settled until then. Every write in the domain now announces itself over
the websocket the rest of the trip already uses — the five REST routes and the
matching MCP tools alike, so an assistant moving a stop is as visible as a
person doing it.
Two new trip-scoped events carry it: roadtripVia:changed with the day's whole
via list, and roadtripTrack:changed. The whole list rather than a delta, because
a via is identified by its position in a chain and a delta protocol would need
an ordering guarantee to be worth anything.
The originating socket is excluded through the X-Socket-Id header the other
domains already forward, so nobody watches their own change arrive twice.
A day that runs past midnight used to keep every one of its stops on its own
card, so day one ended at 03:12 with three places nobody reaches on day one and
day two began with a drive that had already happened. The rail now lays the
stops out by the date they are actually reached: when the clock goes backwards
between two arrivals the ones after it move to the following day, into a block
that says where they came from, and the night drive and its kilometres go with
them. It is an arrangement, not a write — the day planner beside it is
untouched, nothing reaches the database, and a shorter stay the evening before
puts everything back on its own.
The map follows the same arrangement, because a boundary drawn in the rail and
not on the map is two answers to one question. Day one now ends where its last
reachable stop is and the line, the legs and the totals are cut to match.
Two switches in the driving settings, off by default. "Connect the days" routes
the gap between one day's last stop and the next day's first, which is real
driving the rail has never drawn, and counts it. "A colour per day" then puts
the days back into a line that has become continuous, and tints each day header
to match.
Collapsing a day from its header takes its route and its places off the map as
well as out of the rail, and the categories in the corridor panel fold the same
way. The refuel band is one full-width red band with the pump as its button,
the results are chips, and the driving dialog is two columns of panels with the
figures on one right edge.
Also fixes a via that would not adjust the route once dragged. Five separate
causes, all measured rather than guessed: leg threading used the card index
instead of the owning day's, the anchor lookup returned chain indices, it
filtered by the card rather than by the anchor's owner, seams were routed
without their vias, and a seam once routed was never re-fetched.
The fill level was one figure for the whole trip, and a trip does not have one.
A motorway rapid charger is worth about 80 % because the last fifth costs as
long again; the charger at the hotel is worth all of it because the car stands
there all night. Between those two the difference is a whole leg, and a single
setting has to be wrong about one of them.
So the badge on a refuelling stop is now the way in: it shows what that stop
will actually fill to, its own figure or the traveller's, and opens a panel of
the six answers people actually give. Under them it says what the choice buys in
kilometres, because 80 % is an abstraction and "about 290 km from here" is the
thing being decided. Picking the figure a stop already has hands it back to the
setting, the same gesture the kind picker uses to un-pick a kind.
The value lives in places.fill_percent, beside stop_type, because it is a
property of the stop rather than of the person. Null means "follow the setting",
which is every stop that predates the column and every stop nobody has an
opinion about, so nothing changes for a trip that never touches it.
Two pieces of shared machinery came out of it rather than being copied. The
popover chrome — measure before showing, flip when the window is short, close on
an outside click, Escape or a scroll — is one component now, used by the kind
picker and this one. So is the assembly of the range from seven settings, which
the routes hook and the rail both need and which would have drifted the first
time a field was added.
A range could only be typed as one number, and that is the number fewest
travellers actually know. A tank size is on the filler flap, a consumption is in
the manual, a battery capacity and a kWh per hundred are on the data sheet. All
of them divide into the same figure, so the dialog now takes either and does the
division itself. What the parts say wins over what was typed, because it is the
more specific answer, and the range row goes read-only when they do so there is
never a second answer to the same question.
Of ABRP's list only battery wear is here. Plug type, reference speed, relative
speed and drive style shape a consumption PREDICTION; this addon does not
predict one, it divides a capacity by a consumption the traveller states, so
those fields would add typing without moving a kilometre. Wear is different in
kind: it shrinks the capacity itself, and on an older car by enough to decide
whether the last leg of a day arrives.
Storage stays metric throughout, the same rule the range itself follows. An
imperial traveller types gallons, miles per gallon and kWh per 100 miles and
gets them back unchanged; mpg is the inverse of litres per hundred rather than a
scale factor, which a straight multiplication would have stored as a car four
times as thirsty.
The gauge under the picker is the argument that these two ways of stating a
range are the same thing, so it answers while the figures are still being typed
rather than after the field is left. It draws the tank the day it left the
factory: the filled part is what a stop actually puts back in, the hatched tail
is what age has taken off, and both are things the bare number cannot say.
Also here, from the same round: a fill-up that stops short of full. Nobody
charges to 100 % on the road, and counting every stop as a full tank overstated
everything after it by that last fifth. Stops that refuel now carry a badge
saying how far they fill.
Four things that only showed up once it was on screen.
The range budget treated a petrol station and a charger as the same thing, so an electric
car pausing for coffee at a filling station had its battery refilled on paper: the
warnings went quiet for the rest of the day and the driver was told nothing. A vehicle can
now be named, and then only what actually refills it counts — and the search asks for that
kind alone instead of offering pumps to a car that cannot use them. Not saying keeps the
old behaviour, which is what everybody who never opens the dialog is on.
The band was its own shape in a rail made of drive bands. It is one now: the same rail,
the same height, the same type size, a warning tint instead of a ring, and the figures
where a drive band keeps them. The buttons are icons of the same 18px square the shuffle
mark uses, so the band stays one line beside its neighbours.
The old range warning stood down where the band shows. Both at once said the same thing
twice in the wrong order — the answer above the problem — because the warning marks the
stop somebody finds out at while the band sits on the leg the fuel ends on.
Two measured corrections to the search itself. The server turns a box into a circle of
half its diagonal and silently narrows anything past 20 km, so a box of ±25 asked for 35
and came back flagged as narrowed EVERY time, which read on screen as "we could not
check"; ±14 asks for 19.8 and is answered in full. And the circle is centred 12 km before
the dry point rather than on it, because only road already driven is any use — centred on
the point, half the circle was spent on road nobody can reach.
An answer that finds nothing now leaves the button rather than only a close. The place
search is a shared public service that does time out, and "it did not answer" with no way
to ask again reads as broken rather than as busy.
The range budget has always been able to say "you have driven 245 km on this tank" and
never "and here is where to do something about it". The review put it plainly: the value
is in the suggestion, not in the warning.
The warning sits on the stop the car ARRIVES at, which is where somebody finds out. The
fuel runs out earlier, often most of a leg earlier, and a filling station offered at the
warning is one the car cannot reach. So the dry point is computed where it actually is,
a search runs around it on request, and what comes back is filtered to what can be
reached.
Three filters, each one there because its absence gives a wrong answer rather than an
untidy one. Only what lies before the tank empties, because a pump past it is on the far
side of an empty tank. The detour counts double, because 8 km off the road is 16 km of
driving. And a reserve is kept back, because the range figure is a round number from a
manual, not a measurement.
Sorted by the detour rather than by how far it gets. Measured on a real day between
Hamburg and Berlin: the station that got furthest was 9.2 km off the road for one
kilometre more of range, while one 0.9 km off sat almost as late.
Deduplicated by name and half a kilometre, which also came out of that measurement. OSM
maps a charging site as one node per socket: the first three offers were the same
"autostrom plus GmbH" three times over. The four nodes sat in two pairs 6 m and 7 m
apart with 450 m between the pairs, while genuinely different branches of one chain were
18 to 36 km apart — so anything from 500 m upwards separates the two cases.
An empty answer says which kind of empty it is. "Nothing on the reachable stretch" after
a request that failed or was cut short states something that was never checked, and the
server flags both cases itself. Offline it does not offer at all: the place write queues
offline but the day assignment does not, so accepting one would leave an orphan.
Nothing is searched until it is asked for, and one press is one request against a small
circle rather than the sixteen boxes a corridor run costs. Accepting hands the choice to
the same popup a corridor hit goes through, so the stop kind, the dwell time, the
position, the via re-anchoring and the re-route are the paths that already work.
The dry point counts DRIVING metres only. The day's drawn line concatenates every run,
ferries and walks included, while the budget skips those, so walking that line to the
same figure would overshoot by the length of any crossing and put the marker out at sea.
Extract the day route builder out of useRouteCalculation into a pure module and
aggregate it over the whole trip: one map with every day's route, each day in its
own colour, the mode per stage and the trip's total distance. Straight lines first,
roads as they answer; a refused leg keeps its line and adds no distance.
Give the floating map controls one shared drop shadow while adding the toggle, so
the new pill and the base-layer switcher stand off the tiles the way the locate
button always has. Document the control in wiki/Map-Features.md.
Addresses #1736
Dragging a via somewhere else on the map changed where the point IS and never where it
sits in the chain. The anchor that decides which two stops it is threaded between was
worked out once, when the point was dropped, and the drag sent only coordinates —
`roadtripViaUpdateRequestSchema` carried a lat and a lng and nothing else.
So a via pulled past the stop it used to precede kept claiming the earlier leg. The
router then drove out to it and turned back before carrying on, which on screen is not a
subtly wrong route: it is a spur that reads as the drag having done nothing at all, with
the original road still sitting there unchanged.
The anchor is not a property of the point but of where the point sits along the drive, so
it is recomputed on a drag the same way it is on a drop. The projection that did that was
inline in addRoadtripVia; it moves to a shared `anchorFor` and both callers use it.
A drag differs from a drop in two ways, both deliberate. It measures against its OWN day:
letting the nearest day win, which is right for a click on open map, would hand the via to
a neighbouring day whose road happens to pass closer and make it disappear from the day it
was dragged in. And it has no 2 km guard: pulling a via well off the current road is
exactly what the gesture is for, and the anchor only says which leg gets bent.
`after_order_index` is optional on the way in, so a drag inside one leg and an older
client still send just the coordinates, and the stored pin is then left alone rather
than cleared.
The switch a road tripper keeps asking for has never worked. OSRM's `exclude` is the only
avoidance TREK has, and the two public hosts it ships with answer it HTTP 400 on every
leg: their car profile is built without excludable classes, and their own Lua says why
("no memory for classes on demo server"). So "drive this without the tolls" produced
nothing at all on a default install, and the fallback inside the alternatives bar quietly
gave up after one refusal per host.
FOSSGIS runs a public Valhalla on the whole planet next to that OSRM, keyless, and there
avoidance is a runtime weighting rather than a profile that has to be rebuilt. This adds
it as a second engine asked only the questions the first cannot answer, and puts three
switches under the road trip settings that change the road itself rather than offering an
alternative beside it. Paris to Lyon measured 465.8 km / 297 min with tolls against
492.0 km / 454 min without; Hamburg to Copenhagen comes back ferry-free at 469.8 km,
which OSRM cannot produce at all — where a ferry IS the crossing it answers NoRoute
rather than driving round.
Four things the docs would have got wrong, all measured against the live instance:
- `format=osrm` does not carry `has_toll`. That flag is the entire reason for doing this,
and it exists only in the native answer — which is also 5.7x smaller, because the OSRM
shape drags every intersection along. So the adapter translates instead of borrowing a
familiar envelope.
- Without a `radius` Valhalla refuses a point it cannot bind to a road, where OSRM still
snaps one. Vienna's Stephansdom, in a pedestrian zone, answers error 442 until a search
radius is allowed. TREK is full of such places, so every location carries one.
- Ten locations is a hard cap and a road trip day is bundled into one request. A day over
it is split into runs overlapping by one point, which is exact rather than approximate:
a measured six-stop day came back within two metres and under a second of the same day
asked whole.
- Its drive times run 5.4 % above OSRM's over ten European legs and 36 % above on one, and
those times feed the arrival clocks of a day. So a day is answered by one engine or by
neither, never by both, and a piece that will not answer loses the whole day rather than
half of it — the schedule chains leg times blindly and would otherwise print a complete,
plausible, silently wrong timetable.
Because the weighting can fail, the honest surface is the answer rather than the request.
`use_tolls: 0` still returns a tolled road where there is no untolled crossing, so what
the road actually turned out to be is read back per leg, and a day that could not avoid
what it was asked to avoid says so on its own header instead of wearing a label the road
disproves. The switches disable themselves, with a reason, on an instance pointed at its
own OSRM: that operator chose against public hosts, and a second one they never asked for
would undo the choice.
Two things that would have broken quietly and did not:
- The route cache keys on `profile:unit:coords` and is shared with the day planner, the
studio and the booking geometry. Without the avoidance in the key, flipping a switch
returns the old road out of cache in under a millisecond — and worse, an avoiding answer
stored under the plain key hands those other callers a road nobody drives.
- `snapped` is OSRM-only and carries the dashed kerb-to-door spur from #2273. Valhalla
echoes the coordinates it was given and never says where it bound them, but the ends of
a leg's line are exactly those points: measured against Füssen, its first vertex matches
OSRM's snapped location to the digit.
The alternatives bar gets the same engine, which finally makes its "no motorway" and "no
tolls" offers appear on a default install, plus a ferry-free one. `sameRoad` now compares
geometry rather than numbers there, because two engines' distances for the same road sit
kilometres apart and the old 200 m tolerance called that a discovery.
Desktop only, like the whole road trip mode: nothing under client/src/mobile renders it.
Seit die Tipp-Suche beide Schichten fragt, ist ihre Liste gemischt — die
Antwort nennt aber weiterhin EINE Quelle fuer die ganze Liste, und die heisst
'trek-places'. Der Client beschriftet damit jede Zeile, auch die aus
OpenStreetMap. Wer tippt, liest also acht Mal "TREK" und schliesst daraus, die
OSM-Schicht antworte gar nicht. Sie antwortet, sie steht nur unter falschem
Namen da. Auf der Suchstrecke daneben stimmt es laengst: dort traegt jeder Ort
sein eigenes `source`, und genau deshalb liest sich diese Liste richtig.
Also traegt es jetzt auch die Zeile. Das Feld ist optional, weil Google und der
Nominatim-Rueckfall je aus einer Quelle antworten; eine Zeile ohne eigene
Angabe faellt weiter auf den Namen der Liste zurueck.
Dazu die Koordinaten, die der Vorschlag ohnehin schon kennt. Bisher wurden sie
weggeworfen, und wenn der Details-Aufruf nicht antwortete — Kill-Switch, ein
ueberlasteter Overpass-Spiegel, irgendein Fehler oben — baute der Client eine
Textsuche aus Name und zweiter Zeile. Bei einer OSM-Zeile ist die zweite Zeile
aber keine Adresse, sondern der ortsuebliche Name: gesucht wurde dann nach
"Tokio Hauptbahnhof, 東京駅丸の内駅舎", und dessen erstes Ergebnis wurde
kommentarlos als der Ort genommen, den der Nutzer angeklickt hatte. Jetzt
nimmt der Rueckfall den Punkt, den die Zeile mitbringt.
Und das Abzeichen gibt es endlich auch mobil. Die Marke und ihre Tabelle
liegen dafuer in client/src/utils/placeSource.ts, weil beide Oberflaechen
dieselben Listen zeigen und ein Zeichen, das nur auf einer davon steht,
schlimmer ist als keines.
Was hier NICHT drin ist, obwohl es dazugehoert: dass der richtige Bahnhof in
der Liste steht. Das liegt am Dienst, nicht an TREK, und ist dort gemessen und
behoben — Rangfolge nach Art des Ortes plus die Verkehrsknoten, die der
OSM-Schicht ganz fehlten.
Maurice