Dawarich landed on dev untested, which is why release PR #2273 reads 79.0% on
SonarCloud's 80% new-code gate: 1352 of the release's 4610 uncovered units are
Dawarich's own. 946 cases across 30 files take the surface to 100% in shared,
99.7 in server and 99.6 in client, and the gate to roughly 85%.
What stays uncovered is thirteen type-narrowing guards and defensive fallbacks
the only caller cannot reach, each argued in the file beside it rather than
forced with a cast. No source, config or coverage threshold is touched.
noUncheckedIndexedAccess makes every index access optional, DriveLimits wants
its two minute ceilings named even when they are null, and the distance unit is
metric/imperial rather than a unit label.
deriveDriveWarnings takes a two-slot "does this stop refuel" pair, slot 0 for
the stop a leg leaves and slot 1 for the stop it reaches, and the assembler
hard-coded slot 1 to false. The suppression the model was written and tested
for could therefore never fire through it: a day that reaches a charger 700 km
in reported running dry at the charger, and a run of warnings that should
collapse to one stayed at full length. Pinned by a spec of its own now, since
the wrapper had none.
The server's plan built each leg by spreading the whole run's segment and then
overriding only its metres and seconds, so every leg of a multi-stop run
carried the run's distance text, its duration text and its polyline midpoint:
leg one of a 480 km day reported 100 km with "480 km" printed beside it. The
four texts and the midpoint are per leg now, in the reader's own unit rather
than the router's hard-coded kilometres, which also ends a response that mixed
miles in its day labels with kilometres in its legs.
Choosing another road on a leg that already carried a via appended the new
point behind the old one, so the day drove south to the first and north to the
second: a zigzag matching neither the line drawn under the button nor the
distance printed on it. The alternatives are computed for the two bare
endpoints, so the write has to replace the leg, which is what the direct branch
beside it already did.
A day's vias were only loaded while road-trip mode was being looked at, and the
three handlers that re-anchor them after a stop is added, removed or reordered
are reachable from the place inspector in both modes. With the switch off they
computed their correction from an empty list and wrote nothing, so a deleted
stop left the detour on a leg nobody chose, for the traveller and for every
collaborator. They are loaded whenever the addon is on now.
Seam routing paced itself by sleeping after each request, and storing a result
shortened the key its own effect depends on: React tore the effect down
mid-sleep, the cleanup aborted it, and the next request went out immediately.
Thirteen seams left at round-trip speed, the shared routing hosts refused the
tail, and a refused seam changes no state so nothing ever retried it. The wait
now happens before the request, against a clock that outlives the effect.
The "avoidance not honoured" badge could never appear on the rail: the field
behind it was published every round and never written. Only the second engine
reports what it achieved against what was asked, and the rail plans in the
browser, so it never saw the server's own copy — a motorway crossing read as a
motorway-free drive.
Two smaller ones. `trip.toast.loadError` has been called since the first commit
and exists in no locale, so both call sites printed the key itself; it is
written now in all 23. And the phone shell honoured the road-trip session flag
while having no rail, no drive lines and no switch to leave it, so narrowing a
desktop window took the trip overview away and listed every booked night twice.
The desktop tab was reshaped around one idea: a key should be the exception
rather than the thing you are expected to paste. The phone still had the older
shape, where Google wore the "Recommended" chip and the TREK Places API was not
on the screen at all. Two pages, opposite advice, same setting.
So the phone gets the same three comparable blocks in the same order: the TREK
index first, with its own ribbon and a folded panel of what it does and does not
carry, then the two keys under theirs. The Google caveat is said before the
field rather than after it, because somebody about to paste a key should read it
while deciding. The four Google switches moved under the key they spend, folded
away: they are set once and never touched again, and open they were longer than
the rest of the card together. Open-Meteo left the card entirely, as it did on
the desktop, since it takes no key and had the loudest treatment of anything
there.
The provider choice is TREK's own picker now. A native select is drawn by the
operating system and was the one control on the page that did not belong to the
app.
Its description was also describing a TREK that no longer exists: it said one
service answers place search. The index and OpenStreetMap answer every search
and the setting only decides who is asked once they come up empty
(maps.service.ts, keyedProvider). Both that line and the missing-key notice say
so now, in all 23 languages, and the two key hints have short forms for the
narrow screen.
Everything here came out of putting the first commit in front of somebody and
watching them use it.
**The marker card is one card now, and it carries the entry's photos.** Leaflet
showed a one-line label and the GL map a two-line card, so the same marker said
different things depending on a renderer setting nobody connects to journeys.
Both now build from one module: a strip of up to three thumbnails bleeding to
the card's edges, the name, and the place and date as chips. On the GL map the
thumbnails open the entry's photos; the rest of the card still never takes the
pointer, so the map drags from anywhere on it.
**A pin that would not sit still.** Dragging the map left the marker trailing
behind and snapping back at the end. The app's press-feedback rule puts a 180ms
transition on `[role="button"]`, MapLibre and Mapbox give their marker element
exactly that role, and both rewrite its `transform` on every frame of a
movement. Markers are excluded now — every map in TREK, not just this one.
**The phone card, after four rounds of looking at it.** The day is the card's
own edge rather than a bar across its foot, and the ring is inset because the
carousel clips. A card without a photo is opaque: it was a wash of the day's
colour over the map. The country is a real flag rather than two letters —
Windows has no flag glyphs, so the emoji drew "DE" where a flag was meant, and
the image falls back to the emoji when it cannot be fetched. Mood, weather and
the date share the top edge; the flag sits opposite them.
**The day bar answers to a finger.** Press the date and slide sideways to run
through the days. The bar is still a row of buttons underneath, because that is
the only version of it a keyboard can reach, and each one is 20px tall now
rather than 3.
Also here:
- Videos upload to an entry (issue #2341). The gallery has taken them since
#823 and an entry could not: everything went through the images-only filter
and came back 400, reported as "1 of 1 photos failed". Same two-part upload,
same absence of transcoding, and the editor now previews a clip in a `<video>`
instead of a broken-image glyph.
- The search box takes the gap the toolbar already had instead of clipping its
own placeholder.
- Entry cards line up with the day header again: the reorder arrows moved out of
a column of their own into the feed's padding and appear on hover, and the
day-coloured ring on the active card is a layer over it — an outline tight
enough to sit on the card's edge was painting behind it.
- Map attribution is collapsed to its ⓘ. It cannot go away — the OSM licence
asks for it — but it does not have to lie under the carousel.
- The suggestion dismiss and the day-header plus use TREK's own tooltip rather
than the browser's.
roel-de-vries pitched seventeen changes to Journey. Four were already built or
rest on a misunderstanding, one cannot work as described, and three would take
away more than they give; the rest are here, plus two things the list did not
ask for.
**The entry you write on the move now has a name.** Quick capture hid the title
field outright and offered a note instead, so every entry caught on a phone
arrived nameless and a day's timeline read as a column of identical
placeholders. One line of input; it is the single change in this branch that
users will feel most.
**The map stops yanking.** Stepping through the timeline called flyTo with a
zoom floor of 12, so reading a journey from a country view snapped to street
level on the first scroll and stayed there — every marker filling the screen,
and no sense of where anything was. Both renderers pan now and leave the frame
the reader chose. The initial fitBounds still decides how close a journey opens.
**The phone timeline is photos.** A 64px thumbnail beside three lines of text
spent the card on a story nobody reads at that size and truncated the title
after a few characters. The picture is the card now, with the name and place on
it, the country's flag and the date in the corners, and the day carried as a
colour rather than as a number nobody was reading. Above the carousel, a
segment per day: it says how long the journey is, how far in you are, and takes
you to day nine without swiping past days three to eight.
Everything else, briefly:
- A plus in each day header, starting a draft on that day instead of on today.
- A journey opens on today when today is part of it, and at the beginning when
it is not — a journey that ended last spring is something you read.
- Suggestions can be waved away one at a time. The row survives so the trip sync
does not offer the same place again; journey settings brings them all back.
- Mood, weather and the pros/cons list can be switched off per journey. Nothing
written is erased — the form stops asking, the values stay.
- The weather fills itself in at the desk the way it already did on the phone.
The date picks the source, so writing up last Tuesday gets last Tuesday's.
- Enter opens the next pro or con, below the one you are in.
- The verdict moved behind the story's fold, and the fold itself came in from
nine lines to four.
- The external picker lost the count it was printing twice and some padding it
could not afford inside the editor.
- The phone can reorder entries within a day at last; the desktop arrows finally
have translated labels.
- Marker labels are off where a carousel already names the entry, and on where
they are the only name a marker has.
- Search over a journey's titles, stories, places and tags, accent-blind.
- An entry knows which country it happened in, resolved once from its
coordinates against the bundled boundaries.
Not built, and why: the photos-for-markers idea needs clustering first or thirty
markers become soup, and the active entry's photo is already on screen in the
card below. Removing mood, weather and the verdict outright would take them from
everyone who uses them, so they became switches. `capture` on the file picker
takes the photo library away on a phone, which is why the camera is a second
input; it is hidden on desktop now instead. The suggestion strip in the new-entry
flow would be a third surface over the same data — tapping a suggestion already
opens the editor filled in.
The one gap the list missed and this branch does not close: Journey is the only
domain with no offline path. That belongs in its own change.
Book a night to check in at ten, pin a stop to three in the afternoon behind it,
and the rail said 13:46. True enough as arithmetic — with no hour of its own the
chain works the first stop backwards out of the first one that has one, so three
minus a fourteen minute drive minus an hour standing there — and nothing anybody
asked for.
A door that opens at ten, with nothing ahead of it deciding otherwise, IS the
hour: the day starts there and runs forwards. Reached later it stays what it was,
a floor, and a floor below the arrival changes nothing — which is what keeps a
hotel behind an afternoon stop at its real arrival instead of dragging it back to
its check-in.
Pinning an afternoon stop sorted that one and left the hotel it was booked around
sitting behind it. The day's auto-sort reads each stop's own hour, and a booked
night has none: nobody types a time into a hotel row, they type a check-in, and
that lives on the booking. It counts now, so the night moves with everything else
instead of staying where it was dropped.
The assignments e2e builds its own tables and had neither the accommodation
column nor day_accommodations, so every create in that file 500'd as soon as the
insert learned to carry a booking id. Both are there now.
And the shared lint, which is stricter than the other two and which I had not run:
three leftovers from taking the check-out out of the chain, none of them used any
more.
It is the hour a room becomes available. Reaching it later is reaching it; only a
time somebody pinned to a stop can be missed. Read as an anchor it did the exact
opposite of what it means: arrive at 16:14 at a hotel that checks in from 11:00
and the rail reported five hours fourteen late, then read that 11:00 as earlier
than the 15:00 before it, took it for a new day and pushed the hotel onto
tomorrow. The day it came from was left with one stop and dropped out of the list
altogether, so the stop before it appeared to vanish.
The schedule now takes it as a floor: waited for when the drive gets there first,
and otherwise silent. Waiting still prints in ink, because the hour is one
somebody named; arriving late to it prints as computed, because nothing was
decided.
Same shape of mistake as the check-out, from the other side. One says the earliest
you may be somewhere, the other the latest you may still be — neither says when
you drive.
With daily travel times set, a stay was spent only against the hours the window
is open. Twenty-four hours then took two of them to run down: a single night
ended on the day after next, and every stop behind it moved with it.
Night time is time. The hours between one window closing and the next opening now
count towards the stay, so a night that starts just after eight is over just after
eight the next morning and the day carries on from there. An eleven-hour visit
from eight is over at seven in the evening rather than saving its last hour for
tomorrow — the traveller is still there after the driving stops, they simply do
not drive on until the window opens again.
Three things the day boundary was swallowing, all from the same stay.
The stop after it stayed on yesterday. It is reached a full day later but at a
later reading on the clock, and the only rule watching for a new day was "the
clock went backwards" — which that never does. The schedule's own count knows,
as long as it is read as a difference: a day whose first arrivals came out
negative is lifted whole, and reading the lifted offsets raw once moved an early
stop to tomorrow while leaving the late one behind. It now crosses over properly,
marked as having set off the day before.
The morning after started at the exact minute the stay ended, as if the road to
the first stop took no time. The carried minute is a departure; the drive from
there is added to it.
And that drive was invisible. It was on the map and in the day's total, but the
rail jumped straight to a stop at 08:11 after a stay that ended at 08:00. It gets
the same band any other drive gets, above the stop it arrives at — except where a
stop crossed over, which already draws that road under its own block.
A check-out is the LATEST the room has to be handed back, never the earliest
anybody may drive on, so it says nothing the chain can use. It shaped four things
it had no business shaping: the departure the day was built from, the length the
rail printed for a booked night, a day-selector and a clock field in the stop
dialog, and the branch that sent a night's STAY badge to the booking form because
its length was not editable here. All four go. The booking keeps its check-out;
it is a booking detail and lives under Days, where it is entered.
What replaces it is the thing that was always the honest answer: how long you
stand there. That is the traveller's own statement rather than a deadline, and a
stay running past midnight now carries the clock into the morning after — a stop
pinned before it ends keeps its hour and collects the late finding, as it would
from any leg it cannot make. A stay spanning whole days walks the clock forward
over them. An ordinary evening hands on nothing: the night between two days is
not a wait somebody is serving out.
The stay dialog goes to a full day rather than four hours, since it is now the
only place a night is given its hours, and offers eight and twelve as presets.
Every stop answers the same question the same way.
Overlay panels lose the skeleton placeholder. It was drawn in the page flow, so
the first time each dialog was ever opened a pale block flashed under the planner
and never again once its chunk was cached.
This reverts commit d4677bdea, and keeps the departure chip's icon.
The premise was wrong. A check-out is the LATEST moment the room has to be
handed back, not the earliest one you may leave: whoever wants to set off at
seven checks out before that or leaves the bags at the desk. Reading it as a
floor turned a perfectly good plan into a finding, and no amount of wording
around that would have made it true.
The chip keeps the door-out mark. That part says what it always said, only in a
symbol that is not a second clock face beside the arrival.
Every day was scheduled from nothing, so a booking that runs into the next day
ended at midnight as far as the chain was concerned. Check in at 08:00 and out
at 08:00 the next day, and the rail was happy to put you somewhere else at 07:00
that morning, with no sign that the room was still yours.
The day a check-out falls in now starts at the check-out rather than at nothing.
A floor, never a move: a stop with a clock of its own keeps it and collects the
late finding any leg it cannot make in time would give it, so a plan that says
07:00 still says 07:00 and merely admits it does not add up. A stop with no clock
starts at the check-out instead of having no time at all.
Only that one day. A stay running Monday to Thursday leaves Tuesday and Wednesday
alone, because you sleep there, you do not sit there.
The departure chip takes the door-out mark instead of a clock face. Beside an
arrival time, a second clock read as a second arrival.
The rail prints an hour in ink when a person picked it and in grey when the chain
worked it out. Every scheduler anchors on `time ?? checkInTime`, so a booked night
starts its day on the check-in exactly the way a pinned stop does — but two of the
three then asked only about `time` when labelling the result, and printed that
chosen hour grey.
The answer lived in three places and two of them disagreed with the anchor they
had just used, so it is one function now. Nothing but the rail reads the flag.
Only visible since a booked night became a stop of its own; before that no stop
carried a check-in.
Three things the first pass got wrong.
A stop a booking puts on the day is for road trip mode, which needs the
hotel in the driving chain. The day planner already shows that booking as
its own overnight block, so the row there would be the same hotel twice.
It is hidden in Days whatever the service-stop switch says, and the switch
goes back to meaning what it says: the petrol stations the traveller added.
Cancelling a night from the road trip popup took the stop with it. That
control means "this is a pause now, not a night", and the stop sits
mid-drive where re-adding it would land it at the end of the day. The
booking now hands the stop over instead of deleting it.
Moving a booking whose stop belongs to the traveller put a second one on
the new day and left the first behind, which is the duplicate this change
exists to remove. Only a booking's own stop moves now. Stays booked before
this shipped get theirs from the migration, not from the next edit they
happen to receive.
The trip planner and the journal get a "From Dawarich" list: the stays
recorded for those dates, each one a row that can be dismissed or turned
into a place or an entry after a review step that shows time, name, note
and day. A place that came from a recording carries the Dawarich mark
next to its name so its origin stays visible afterwards.
The recorded route lies over the trip and journal maps as an overlay,
coloured per day and cut along the reader's own timezone rather than
UTC. It is fetched for the window on screen and never stored.
The Atlas gets its own panel beside the map for the countries and cities
the recordings prove, and the wish list is ticked off there, on the day
of the visit, undoably. The phone has its own take on all of it, in the
mobile shell's colours and with native sheets.
A new `integrations/dawarich` domain behind its own addon. Each reader
connects their own instance; the API key is encrypted at rest and never
returned. Nothing is written back to Dawarich, and no raw position is
kept in TREK: the recorded route is fetched per request for the window
being looked at and thrown away again.
What it produces are suggestions, never facts. A recorded stay becomes a
proposed place or journal entry, a country or city becomes a proposed
Atlas mark, and a stay near a wish becomes a proposed tick-off; each one
waits for the reader to confirm it. Identity is (user, Dawarich visit),
so a second sync neither duplicates nor overwrites what was accepted,
and deleting the result puts the suggestion back on the list.
The sync runs as a job on the central scheduler, one user at a time,
guarded against overlapping runs.
A key could only ever read everything a user owns. When a second service
reads TREK on that user's behalf, that is more than it needs: Dawarich
wants trips, days and places, not notes, bookings or the wish list.
Keys can now be minted with an explicit list of areas, checked in the
guard and shown when the key is listed. Keys that existed before this
keep full read access, so nothing that works today stops working. A key
marked as limited whose list cannot be read grants nothing rather than
everything.
Zod schemas for the Dawarich integration: connection settings, the
suggestion list and its accept payloads, the recorded-track window and
the Atlas country/city proposals. Places gain an optional `source` so a
place that came out of a recording can say so.
An Amap row now carries the same source mark the TREK index, OpenStreetMap
and Google rows get, named per locale because 高德地图 is the name it goes
by where it matters. The "search is on OpenStreetMap" notices and the
key hint in the details column are gone with the keys dev had already
removed, and the client-side provider mirror with them.
amap_poi_id travels with a picked result into the form, the details
column and the shadow log, so a saved place keeps the id it was found
by. A pasted Amap link goes to the resolver like a Google one.
The provider produced amap_poi_id, but nothing stored it, so a saved
Amap place could never be reopened against Amap. The column now travels
with google_place_id and osm_id through the shared contract, the place
insert and update, duplicate matching, the assignment projections, the
trip copy and the three place MCP tools.
The three figures under a traveler's final budget came from the server, netted
in integer trip cents at the rate frozen on each expense. The rows listed under
them did not: both shells converted the expense list again with whatever live
rate they had, and with none loaded yet (first render, offline) the raw foreign
amount went out under the display currency's symbol. On any trip with a
foreign-currency expense the rows could not add up to the line above them.
The settlement response now carries the rows with the figure: `sources` on each
finalBudgets entry lists what the person fronted per expense, the recorded
transfers on their side and the open flows, in display cents. They are filled
by the same two loops that fill the totals, so an expense with no split members
stays out of them as it stays out of the ledger, and each list is spread over its
figure's already allocated cents with the same largest-remainder split, so the
sum is exact in every display currency. The shells print those cents and only
resolve names; the rows carry the sign of the line they sit under.
"Reimbursements received" was written from the receiver's chair: the traveler who sent a payment saw it as a plus under a label claiming they had received something. The line is net of both directions, so its label now says so in every locale.
The settle-up view says who owes whom, but nothing on the Costs screen
answers "what did the trip cost me": the balances move every time a
payment is recorded, and the tiles only describe the signed-in user.
The settlement response now carries finalBudgets, one row per participant
in the ledger: expenses (what they fronted on split expenses), reimbursed
(recorded transfers, received minus sent), pending (their current
balance) and final = expenses - reimbursed - pending.
- Computed in calculateSettlement from the same integer trip cents as the
balances, filled by the same loops, so the breakdown can never
contradict the balance printed next to it. Each component is converted
to the display currency as its own set and the final is subtracted in
display cents, so the three lines add up to the total in any currency.
- A "Final budget" card on desktop, the narrow desktop layout and the
mobile Costs tab: one amount per traveler, and a tap opens the three
lines plus the expenses, transfers and open flows behind them. The
filtering lives in CostsPanel.helpers so both shells share it.
- Contract in shared (budgetParticipantFinalSchema); the MCP
get_settlement_summary description mentions the new field it returns.
- Four new costs.* keys, translated in every locale.
The settle-up form only exposed from/to/amount and silently dated the
payment by created_at, unlike a regular expense which has an editable
date. Add a settled_at column (independent of created_at, same split as
expense_date) through the schema, migration, service, REST and MCP
surfaces, and the desktop + mobile forms; the ledger groups a payment by
settled_at, falling back to created_at for rows recorded before the
column existed.
Sharing a list works between people on the same TREK. This is the other
case: giving one to somebody who runs their own, or keeping a copy. Export
sits beside Edit and Share in the list header and downloads the open list;
Import sits beside New list in the rail, reads a file, shows what is in it
and makes a new list of it. Desktop only, which the route already decides.
What travels is what somebody wrote down: the list's name, colour and
description, its labels, and each place with its address, coordinates,
notes, status, contact details, category name and labels. A file is dull
JSON on purpose, so it can be read and edited by a person.
What does not travel is everything that only means something on the instance
it came from. Ids of every kind, since the receiver issues its own and a
category crosses over by name. Star ratings and members, because a rating is
an opinion somebody gave the people on that list. Provenance into trips,
which points at rows the receiver cannot see. And an image path under
/uploads, which resolves on the sender's server: only an absolute https URL
survives.
A file is a stranger's JSON and is read as one. It is parsed in the browser
that chose it and never uploaded; the parsed list goes through the same
contract on both sides; and a link that is not http(s) arrives as nothing
rather than as an anchor. Strict where it must refuse, forgiving where it
can drop: a file that does not say what it is never reaches the importer,
while one unreadable place inside it is skipped and counted, and one bad
field on a good place costs that field alone.
An import is always a new list. Importing into an existing one would mean
deciding what happens to a place that is already there, and every answer to
that is a merge nobody asked for.
A new book was a cover, a spread and a back cover, so it opened straight
onto pages 2 and 3. A bound book does not: the inside of the cover is
blank, and the first thing facing the reader is a single right-hand page,
page 1. The same at the end, where a single left-hand page sits before the
back cover. Both are laid down now, empty, in a new book and in a laid-out
one, and they are fixed the way the covers are: an inner spread only ever
goes between them.
The page numbers follow. They were counted from a spread's position in the
array, which assumed the spread after the cover was the first, and three
places did that sum on their own. One function now counts along the book,
one page for a single leaf and two for a spread, so the sheet on screen and
the label in the print view and the folio on the page all say the same
number. A book with a first page starts at 1; a book from before the first
page existed has none and keeps the numbers it always had.
TREK searches its own place index and OpenStreetMap. Neither carries a rating,
so "the best rated hotel around here" has never been answerable, and an operator
with a better index for their region had no way to reach the search box at all.
The searchProvider hook is that way in: a plugin is handed the query, a limit,
the language and the coordinate the search is biased toward, and answers with
places in the same shape the core search returns, plus a rating.
It sits beside the core search rather than inside it. The plugin runtime already
imports PlacesModule, which imports MapsModule, so asking the providers from the
maps service would close a module cycle — the same reason the other fourteen
contribution controllers stand next to what they contribute to. The client asks
both at once and merges, at the single point every caller already goes through,
so all nine search surfaces get plugin hits without knowing the hook exists.
A plugin index may never hold up the list: the client stops waiting at two and a
half seconds and the host gives a provider two, which is also why the budget is
the shortest of any hook here. With no such plugin installed the route answers
without reaching the runtime at all.
Every hit is normalized host-side and shared by the REST route and the MCP tool,
so a cap that holds for the browser holds for the assistant: coordinates are
range-checked, strings capped, the rating clamped to 0..5, a website must be
http or https, and ids are namespaced so they can never collide with an OSM one.
search_places_via_plugins is the MCP half, because what the user can see the
assistant has to be able to see; search_place now points at it.
Two people shaping one drive were each editing their own copy: a via dragged on
one screen reached the other only on the next reload, and the route it changed
looked settled until then. Every write in the domain now announces itself over
the websocket the rest of the trip already uses — the five REST routes and the
matching MCP tools alike, so an assistant moving a stop is as visible as a
person doing it.
Two new trip-scoped events carry it: roadtripVia:changed with the day's whole
via list, and roadtripTrack:changed. The whole list rather than a delta, because
a via is identified by its position in a chain and a delta protocol would need
an ordering guarantee to be worth anything.
The originating socket is excluded through the X-Socket-Id header the other
domains already forward, so nobody watches their own change arrive twice.
A day that runs past midnight used to keep every one of its stops on its own
card, so day one ended at 03:12 with three places nobody reaches on day one and
day two began with a drive that had already happened. The rail now lays the
stops out by the date they are actually reached: when the clock goes backwards
between two arrivals the ones after it move to the following day, into a block
that says where they came from, and the night drive and its kilometres go with
them. It is an arrangement, not a write — the day planner beside it is
untouched, nothing reaches the database, and a shorter stay the evening before
puts everything back on its own.
The map follows the same arrangement, because a boundary drawn in the rail and
not on the map is two answers to one question. Day one now ends where its last
reachable stop is and the line, the legs and the totals are cut to match.
Two switches in the driving settings, off by default. "Connect the days" routes
the gap between one day's last stop and the next day's first, which is real
driving the rail has never drawn, and counts it. "A colour per day" then puts
the days back into a line that has become continuous, and tints each day header
to match.
Collapsing a day from its header takes its route and its places off the map as
well as out of the rail, and the categories in the corridor panel fold the same
way. The refuel band is one full-width red band with the pump as its button,
the results are chips, and the driving dialog is two columns of panels with the
figures on one right edge.
Also fixes a via that would not adjust the route once dragged. Five separate
causes, all measured rather than guessed: leg threading used the card index
instead of the owning day's, the anchor lookup returned chain indices, it
filtered by the card rather than by the anchor's owner, seams were routed
without their vias, and a seam once routed was never re-fetched.
Maurice