Translates the keys dev gained since the branch was cut, the help center
above all, and drops the six keys dev no longer has. Registers sk
everywhere a language is listed: notification emails, the rate-limit
message, the placeholder check and the wiki. The two tests that counted
the languages by hand now derive the count from SUPPORTED_LANGUAGES.
Translates the keys dev gained since the branch was cut, the help center
above all, and drops the six keys dev no longer has. Registers az
everywhere a language is listed: notification emails, the rate-limit
message, the placeholder check and the wiki. The two tests that counted
the languages by hand now derive the count from SUPPORTED_LANGUAGES.
The server already put PLACES_API_KEY ahead of the key saved in the admin
panel, but nothing said so: the variable was in no template and the admin
field kept showing a stored value that no search used.
GET /me/settings now answers env_keys, the variable behind each key the
environment sets (Google, Unsplash, Amap), and null for that key's value.
The admin field turns read-only and names the variable, Test still probes
the key a search resolves to, and a save leaves those names out so the
stored fallback survives. The variable is documented in .env.example,
docker-compose.yml, the Helm chart (as a secret) and the wiki.
Addresses discussion #1881.
On a slow line an OIDC-only login page drew the email and password form while it
asked the server which sign-in it offers, then the SSO button once it knew, and only
then left for the identity provider. Both looked like something to fill in or click.
Until the config answers, the page now shows a short wait instead of the form, and
on an OIDC-only instance it becomes a screen that only says where it is going,
"Taking you to Keycloak…", with nothing to fill in. A repeat visit announces that
redirect at once from the cached config. Should the redirect not have left the
page after eight seconds, a quiet link continues by hand.
The redirect still never runs on a cached config, right after a sign-out or after a
failed sign-in at the provider. That last case now loads the config as well, so an
OIDC-only instance shows its own screen with the error rather than a password form
nobody can use.
"Add, reorder and rename days" still described the reorder popup as it was before
#2485: Move up, Move down and one Add day at the end, and its picture showed that
popup. The guide has five steps now. The reorder step names the bin on each day and
the two ways of adding one, the next date or Without date, and a new step shows the
question before a day goes, with what goes with it, answered with Cancel. The first
step says that shortening the dates lists the days that go, and the tip says moving
days can be undone and deleting one cannot. All 23 languages use the labels their
own interface shows.
The picture script looked for the Add day button that #2485 removed, so it could not
run any more. It frames the popup itself now, asks about the second day so the
question has places and a booking to list, and clicks the first day a second time
when the steps before left it selected and the first click folded its panel away.
The pictures picked up five faults that the run could not see, because a
passing step only proves the click landed.
The ring vanished on the lightbox: the accent is nearly black and so is
the overlay. It now measures the surface behind it and puts a white
hairline outside itself and the number only where the contrast is too
low, so every other picture keeps the single line it had.
The number fell outside the picture whenever the target was wider than
the frame, which is every full-width row: the frame is known before the
ring is drawn, so the number moves inside far enough to clear the edge.
The satellite imagery was a grey rectangle although every tile came back
200. Leaflet fades a tile in over 200 ms and takes the progress from
`+new Date()`, and the browser's clock is pinned to the picture day, so
the opacity it writes on every frame is always 0. A stylesheet on
Leaflet's own `leaflet-tile-loaded` outranks that inline style. The
satellite guide also waits for decoded tiles now instead of for a tile
element to exist.
The uploaded files looked like nothing anyone would upload. A PDF is
drawn with an issuer band, a reference, a table of fields and a footer,
and the two photographs are gone: a drawn photograph reads as clip art
at any size, so the trip carries a map screenshot with a pin and a
booking confirmation in a browser window, which are graphics in reality
too.
In the panel, a step picture was covered into a 16:10 box and lost its
sides; contained everywhere now, the hero and the result in 16:9.
Beside that: the place guide gained the drag-and-drop route to a day as
its fourth step, in all 23 languages, and `e2e/help/README.md` now holds
the whole visual contract, the traps that cost this round (the pinned
clock, prettier against the client sources, a killed run holding its
ports) and how to find out which pictures a change forces to be retaken.
The whole set, 914 files, made in one pass on one machine against one
calendar: 41 screens, 225 guides, 764 steps. What changed beyond the new
guides: the pictures carry the run day's dates now, the Files tab's
preview shows a real PDF page, the Place details card has its hours, its
ring and its phone number, the trip map and the Atlas carry the Dawarich
control the new bullets describe, and the Files toolbar has Document
sync beside Trash.
The first round could not photograph a few screens because the service
behind them was not there: Dawarich, AirTrail, a document store, the
booking extractor. They are there now, so the guides are too.
- map-dawarich-trail, dawarich-countries and dawarich-wishes: the run
uploads a recording of the seeded trip, and of the year before it, into
a Dawarich of its own (dawarich-track.ts) and reads it back.
- airtrail-import: four flights are put into an AirTrail account, two of
them connecting in Tokyo, so the picker offers the layover.
- import-booking-file and import-transport-file: the confirmations carry
their facts as schema.org data the way portals send them, the extractor
reads them, and the guides go on to the filled-in form and the card.
- files-sync and document-providers: a Nextcloud folder with two
documents in it, bound to the trip, and the switches in the admin panel.
- read-place: three seeded places carry their OpenStreetMap id, so the
card shows the week's hours, the phone number and the Open or Closed
ring. The rating stays Google's, and the texts say so now.
- map-compass on the MapLibre renderer, which the guide switches to and
back; files-preview opens a PDF, which needs the full browser rather
than the headless shell (channel: chromium on the help-media project).
Each of those takes an address and a key from e2e/help/media.env, which
is not committed; media.env.example and the README say what each one
needs and why the address has to be the machine's own on the network.
The seed's dates are offsets from the day the pictures are taken
(e2e/dates.ts): the trip ends today, so the boarding pass, What's Next
and the forecast have something to show whenever the run happens, and
nobody bumps a date in three files every few weeks. run.mjs fixes the day
once per run so the projects and the workers agree across midnight.
reservations.fromPlan, packing.suggestions, packing.suggestionsTitle,
packing.allSuggested, packing.emptyHint and the packing.suggestions.items
array are referenced by no component; the suggestions block left the
packing list in #14 and the keys stayed behind in all 23 languages. The
VORSCHLAEGE constant beside them was exported and imported nowhere.
With the one structured entry gone, a catalogue value is a string and
nothing else, so TranslationValue says so and the placeholder spec no
longer needs to skip what is not one.
Rendered in place, its fixed overlay sat inside the trip page's stacking
context, below the navbar's z-[200]: the bar painted over the lightbox's
header, so Open in new tab, Download and the x were unreachable. The two
document previews beside it already portal into the body for this reason.
The tests read the lightbox through baseElement now, since a portal puts
it outside the container Testing Library returns.
- The lightbox header's button group is the right thing to ring, but its centre
falls between the buttons where the picture underneath takes the pointer, so
the hover never landed. The pointer goes on a button, the ring stays on the
group.
- The collection the place is saved into was matched by a name another guide's
list starts with.
- help-media gets four minutes a guide instead of two and a half. A guide is a
whole task and a few of them wait on the network more than once; the
nearby-places one runs two POI searches and opens the place form on top.
The + at the end of a place row belongs to the open day, and closing the day's
details panel closes the day with it, so there was no + to click and the guide
waited for one until the test gave up.
- place-to-collection found the place already in a list, because the Collections
screen's guides run earlier and leave it there. It clears the place first now,
with the same helper its cleanup uses.
- The road trip rail leaves out a day with nothing to drive, which its own
helper says, and the fold step was the last place still pointing at day 1.
- The transport form's location search took whatever the geocoder ranked first,
and for a landmark that is as often a shop down the road. It picks the
suggestion that answers the query.
Every one of these passed when its own file was run alone and failed when all
of them ran against one seeded trip, because another screen's fixture had put
something in the way.
- The Bookings fixture names a booking after a place, so the Assign File dialog
offered two entries opening with the same words.
- The Lists tab has a Shared button, which the loose name of the navbar's Share
also matches, so opening a trip on that tab never settled.
- A traveller's avatar is named by the initial it draws, not by the username;
the title carries the name.
- Departure and Arrival are what a booking gets when it crosses days, so the
guide about them points at the flight, not at the train that starts and ends
on one day.
- The What's Next stop was timed from the wall clock of whoever runs this,
while the browser's clock is pinned to the day the pictures are taken on.
Both now come from the same constant.
- The map was panned with the arrow keys, which Leaflet only reads while its
container has focus, and focusing it from here did not take. It is dragged
now, from a point checked to be free of markers, because a press on a marker
drags the place onto a day instead.
The duplicate-trip guide dropped its copy by position, keeping whatever the
trips endpoint happened to answer first. The copy survived, and three files
later the journey dialog offered two entries starting "Weekend in Lisbon" and
the create-journey guide could not say which one it meant.
The copy is now dropped by name and the delete is checked, and the journey
dialog picks its trip by accessible name rather than by a substring another
trip shares. Each file passed on its own before this; only the whole suite in
one run showed it.
Place details, Day details, Map, Transports, Bookings, Lists, Costs, Files,
Collab and Road Trip: 77 guides over 360 steps, each one a task a reader can
follow, with the Playwright script that will photograph it. The fixtures they
need go in beside ensureDaysFixtures, and every screen is a child of the trip,
so the panel folds them under it.
The capture now pins the browser's clock to the day the seeded trip ends. A
picture has to look the same whoever takes it and whenever: a day later the
trip is over, My Trips moves it out of the boarding pass, What's Next has
nothing left to list, and a forecast for a day in the past is not a forecast.
Only `Date` is pinned, so timers keep running.
trip-days is green end to end after its locators were checked against the
running app; its route guides read day 6, whose two stops sit next to each
other, because day 1's are separated by the flight and have no leg of their own.
Two cases replaced window.location wholesale to spy on reload. The copy is flat,
the real object's fields are getters on its prototype, so the replacement has no
href for a relative request URL to resolve against and the DELETE the leave-trip
case waits for never reached the mock server. It also stayed replaced for the
rest of the file, which took six later cases down with it.
The leave-trip case asserts the request, so it keeps the real location: jsdom's
reload only logs. The transfer case asserts the reload, so it keeps the stub,
and the original is put back after every test.
Nobody saw this: the client coverage job needs i18n parity, which has been red.
'2 sub-screens' stopped identifying one button the moment a second screen had
two of them, and the trip is about to have a dozen. The toggle is looked up
within the row it belongs to instead, which says what the assertion means.
`collab.notes.expand` was never added to the catalogue, and `t()` answers with
the key itself, so the `|| 'Expand'` fallback never ran and the tooltip read
collab.notes.expand. `common.expand` says the same thing and is already
translated everywhere, so the button uses that, and it now carries the label
for assistive tech as well.
All eight guides of Trip > Places now have their pictures, taken from the real
app, plus the hero of the screen, and the block is translated into the other
22 languages.
Making the pictures showed three texts describing a UI that is not there, and
they are corrected: the file import dialog has no Enrich places via Google
switch (only the list import has one, and only with a Google key), a GPX import
closes with a message while only KML and KMZ leave a summary behind, and both
list providers are always offered. The search and the details column need no
Google key either: they fill themselves from the TREK index, OpenStreetMap,
Wikipedia, Wikivoyage and Wikimedia, and only ratings are Google's.
The script needed the same honesty. ConfirmDialog and the two import dialogs
are portals of their own with none of Modal's classes, so they get their own
locators, and create-place now looks up a place whose entry actually carries a
picture, opening hours and a description, instead of photographing an empty
details column.
Every context file carried its own copy of the same little guide factory and
the same context literal. Thirteen screens of a trip would have made thirteen
copies of it, which is both the duplication a quality gate counts and the
hand-mirrored state the repository asks us not to keep, so the shape moves into
defineScreen and a context file becomes data: ids, counts, docs, cross-links.
Four doc links never resolved. Trip-Planner and Sharing-and-Collaboration are
not wiki pages (Trip-Planner-Overview and Trip-Members-and-Sharing are), the
places import anchor is importing-multiple-places, and the offline anchor was
written in GitHub's slug, which is not the one the in-app reader produces.
Nothing caught them, so the registry test now checks every slug and every
anchor against wiki/, with the heading slug itself lifted out of HelpPage so
the reader and the test cannot drift apart.
A help icon on every screen opens a panel with the screen's overview, its
sub-screens, task guides with a framed picture per step, search across guides
and the wiki, and a switch to any other screen's help. Guides exist for the
dashboard, Vacay, Atlas, Collections, Journey (list, journal, studio), Settings
(all tabs), Admin (all tabs) and the trip frame; the trip's own screens are
in progress. Pictures are produced by Playwright (client/e2e/help), texts in
all 23 languages.
Along the route: once kinds are picked, the closed "Looking for" control shows them by
their coloured icons alone, and names them in its tooltip and to a screen reader; the
names stay in the list. The day the search runs along moved out of the header into the
same line, as a dropdown of the same shape, so the question reads as one: these kinds,
along this day. Both share one small module for the shape and for closing on a click
outside or Escape.
Pulled narrow, the road trip rail drops the stop count from its head, with the hairline
beside it, and from every day header, and keeps distance and time.
The flight block in the road trip rail printed each fact two or three times: the booking
title in capitals with its duration cut off, the airport code three times per side, an
unlabelled 14:15 on the right with "Departure 15:15" under it, 17:20 twice, and a warning
"+9 h 39 min" measured against a check-in nobody could see, for a flight that was missed.
It now reads in four lines: the booking as typed; the two codes with their timetable clocks
and the ride between them; the places without the code in brackets; and the check-in as a
badge that carries its own state, the hour when the drive is on time, by how much when it
is late for the check-in, and "Missed, there at 23:54" when it gets there after the
departure, with the duration beside it. A missed ride edges the block and says so in the
day header, also when the day is folded. Trains and buses say boarding. The phone shows
the same, and its rows now read the lateness and missed-leave findings at all.
The stays at the edge of a day are named by the hotel, with the edge in a badge: Check-out
with the latest hour, Day start, Overnight, or Check-in with the hour the room is ready. A
plan that leaves after the check-out turns that badge instead of adding a line. They wear
the hotel stop's own disc, the stay's own stop shows its check-in the same way, and the
driving settings button shows when the stays are switched on.
The two-part badge the rail used in six hand-typed copies is one FigureBadge now, and the
airport code is stripped by one shared helper instead of two private copies.
On a day a flight, train, ferry, cruise or bus leaves and lands, tonight's stay was seated
by its check-in time. A hotel in Munich checked into from 15:00 stood ahead of a 15:15 flight
out of Hamburg, so the drive went from the Munich hotel to Hamburg airport and reported the
flight as nine hours late. A check-in is the earliest arrival, not an appointment: such a
stay now waits behind the landing when it lies nearer the arrival than the departure, and
its check-in only holds it when the ride lands before the room is ready. A time typed on the
stop keeps its seat.
With the stays at both ends of a day switched on:
- a day with nothing but the next stay's check-in and a ride booked across it gets no drive
from one hotel to the other, the same rule the day plan follows since #2476;
- a stay is never joined by road to a terminal more than 2000 km away. The check moved to
shared/roadtrip so Days and the road trip read one copy.
A departure terminal's pin is dated: reaching it more than half a day late no longer moves
the flight to the next day without a word, it is a late warning with the full minutes.
A check-in evening also carries the stay's check-in time, as a label only.
calculate_roadtrip runs the same code and its description says all of the above.
The effect that keeps the selection on a bound store read the pick from
its own render. When a click landed after the card was committed but
before that effect ran, the effect then wrote the first store back over
the click. On a loaded CI runner this is what made FE-DOCSYNC-PANEL-008
fail now and then. The effect now reads the current pick when the update
runs and only follows the list.
FE-DOCSYNC-PANEL-023 forces that order and fails on the old effect.
ISO dates sort the same as plain strings, but a sort without a compare
function reads as an accident to anyone checking it, and SonarCloud flags
it as one. The three places that order the trip's dates now say how.
The day dialog hangs from a fixed top edge, so switching to the delete
question only moves its bottom edge, and the question opens at its top
with the focus on Cancel. Cancel, Close and the quiet add share one
outline; the dated add is drawn in the accent instead of filled with it.
Dates in the dialog, its hints and the new-day toast read the way the day
list writes them, and captions use the muted text colour for contrast. A
stay booked twice is named once in the warning. On the phone the dated
pill shows only its date, so both pills fit side by side.
When the trip dialog asks both how bookings follow a moved start and
which days the new dates remove, the two now stand side by side in a wide
dialog instead of one long column.
Deleting a day no longer stacks a second dialog over the reorder dialog. The
dialog swaps its list for the question at the same size and in the same place;
Cancel and Escape bring the list back with the focus on the row asked about.
The foot is one row of normal sized buttons with the hint line above it, the
undated day is labelled "Without date" in every language, and the dialog is a
step wider so no label breaks. The list of what goes with a day is quieter: a
cancelled stay tints its whole row, a day with nothing on it is one plain line.
On the phone the add buttons are two pills under the scrolling list, and the
confirm sheet moves a long label to its own row instead of breaking it.
The question before a day goes now also says which day without a date takes over the last date, which stay running across the day loses a night and when it checks out, and what the cancelled booking costs, or that it has no expense at all; further bookings on the same stay are counted. Road trip boundaries follow their own days when the numbering still has a hole from the old delete, and ones left on no day are dropped.
A long list scrolls inside the confirm card on both shells with the buttons always in reach, Escape closes only the sheet on top and takes the trip dialog back from its review step to the form, and the panel of a deleted day closes, also when a fellow traveller deletes it. Undo steps on a deleted day are dropped, a restored place skips days that are gone, and an undo that fails says so. The day cache is written without holding up the answer once the server has it, the tip under a new start date points at the dated add button, and two Collab tests find the confirm button by its role instead of an old colour class.
The trip dialog on the desktop and the trip sheet on a phone now ask before a save whose new dates remove days with something on them. The question names those days the way the day list does and lists what goes with them in the same rows the delete day question uses: planned places stay in the place list, notes and day texts are deleted, bookings stay under Bookings, and a stay that checks in or out on a removed day goes as a whole while its booking and expense remain, shown in the danger tone. A moved start gets both questions in one step, with the booking hint following the chosen shift mode, and a save that only drops empty days asks nothing.
The rule that lays the days out moved into shared as planDayGrid, with resolveDayGridRange deciding whether the rows are rebuilt at all. generateDays on the server now carries that plan out in one transaction, so the warning names exactly the days the save takes, and a seeded fuzz test holds the new rebuild to the old one over 300 random day grids. The update_trip tool says in its description what shortening takes and lists removed_days in its answer.
Alongside, the dialog sends a day count only when it changed, so a stale count no longer trims a day just added, stays are reloaded after every date change including the one made on a phone, and the date shift tip now points to adding a day under Reorder days.
On a trip with dates the reorder dialog and the days sheet on a phone now offer two ways to add a day: a day without a date at the end as before, or the calendar day after the last date, named on its button, which extends the trip by one day. The new day goes right behind the last dated day, so the days without a date move one place back with their plans, and no existing day or booking changes its date.
The server does it in one transaction behind a new dated flag on the day create contract, used by REST, the create_day tool and the plugin RPC alike. It moves the road trip boundaries of the days behind the new one, and announces the day with day:reordered and the grown trip with trip:updated; an insert at a position announces its trip now as well. The next date and the day limit come from one shared rule, so the button never promises a date the server would not give.
On the client the add is online only and runs one at a time, so a double click cannot grow the trip by two days. A wiring test that picked the stay question by its position now finds it by its handler, since the delete question sits in front of it.
Every row of the reorder dialog, and of the days sheet on a phone, now has a delete button. It first asks, and the question lists what goes with the day: planned places stay in the place list, notes and day texts are deleted, bookings stay without a day, a stay that checks in or out on the day is cancelled with its booking and expense (shown in the danger tone), and on a dated trip the later days and their bookings move one date earlier or the trip ends a day earlier.
The server side moved from a bare DELETE into DayRemovalService, which REST, the delete_day tool and the plugin RPC all use. It closes the numbering, keeps the dates on their positions like a reorder, re-stamps the moved bookings, shifts the road trip boundaries, cancels touching stays through the accommodations domain, refuses the last day of a trip, and fans out day:deleted, day:reordered and trip:updated so collaborators renumber and see the new day count and end date. The trip query moved into a leaf file so the days domain can read it without a module cycle.
On the client the delete is online only, runs optimistically through the days slice with the same reducer collaborators apply, and the ConfirmDialog gained a slot for extra content, an Escape that only closes itself, and the danger and accent tokens.
"The night booked at "Rostock" goes with the place, together with the
booking "Rostock" and any expense linked to it" named the place twice and
read awkwardly. The note now says "This also deletes the stay booked at
"Rostock", its booking and any expense linked to it", quotes the booking
only when its title differs from the place, and reads the same in all 23
languages.
A place from the TREK index can carry its website the way Overture has it,
such as fr.wikipedia.org/wiki/Chapelle_Sainte-Barbe_du_Faouët, and saving
it to a collection or a trip failed with "website must be an http or https
URL" over a field the dialog does not show (#2483). OpenStreetMap, Amap and
booking mails hand over websites the same way.
Every place a website comes in from outside now goes through one shared
helper, normalizePlaceWebsite: the index client and its nearby search, the
Overpass and OSM detail mappers, Google search and details, Amap, plugin
search and the booking import. It completes a bare or protocol-relative
host to https, keeps http and https as they are, and drops every other
scheme and anything that is no address. Only the scheme is added, so an
accented path is stored as written.
placeWebsiteSchema completes a bare host the same way before its check, so
an older client, a cached offline result, an MCP agent or a plugin is no
longer refused, while javascript:, data: and mailto: still are. The REST
controller, the plugin RPC and the enrichment now store the parsed value
instead of the raw one, and create_place_accommodation takes the website
through the same schema as create_place. safeHttpUrl still links only a
value already stored in its final form, so nothing changes on screen.
Tests: SHARED-WEBSITE-001 to 012, SHARED-PLACE-030 to 034,
SHARED-COLLFILE-2483-01, COLLECTIONS-E2E-089 and 090,
PLACES-E2E-2483-01 and 02, PLACES-CTRL-2483-01 (the louvre.fr case
adjusted), MCP-PLACES-2483-01 to 03, MCP-ACCOM-2483-01, MCP-COLL-2483-01,
PLACES-RPC-2483-01, MAPS-2483-01 to 05, MAPS-POIS-015, MAPS-GERS-010,
AMAP-012b, TREK-PLACES-2483-01, PLUGIN-SEARCH-2483-01,
BOOKING-IMPORT-2483-01, ENRICH-052e, ENRICH-102 extended, ENRICH-120 adjusted,
FE-UTIL-SAFEURL-007.
With the Unplanned filter on, a click on a stop in the day list moved the
map while a click on the stay chip did nothing: the map only went to a
selected place it showed as a pin, and the GL map also to one of the open
day's stops, which a stay is neither. Both renderers now look the target
up the same way, the pin first, then the day's stop, then the selected
place itself, so the map goes to the stay whatever filter hides its pin.
Since 4.3.0 every lodging booking types its place as 'hotel', and 'hotel'
is one of the road trip stop types. With "Show in Days too" switched off,
Days dropped every such place from the trip's place list, so a hotel
vanished from the sidebar, from the booking's own place picker and from
the Days map the moment it was booked, and a click on it in the day list
found nothing. Nothing was deleted: road trip mode kept showing it.
Days now leaves out only road trip stops nobody booked. A lodging place
stays, and so does any place a stay or a booking points at, on the
desktop and on the phone. Trips planned on 4.3.1 show their hotels again
without any change to their data.
An imported GPX or KML track is no longer offered as the place of a stay,
in the booking form, the day's hotel picker and the phone's sheets. A
stay that already names a track keeps showing it.
Takes back the editable price, currency, website and phone on collection
places from 0df82185b and its review follow-up in a910c2a83. Costs are kept
inside a trip only; a collection does not carry them, and #2471 is a
feature request rather than a bug. The collection files are back to how
they were before, including the dimmed save button from f16698bdb, which
only mattered for the price field.
A connection test against a server with a self-signed certificate ended in
"fetch failed (self-signed certificate; if the root CA is installed
locally, try running Node.js with --use-system-ca)". The advice is meant
for whoever runs the server and cannot be acted on from the settings card,
so it is cut off.
The save button of a collection place stays locked while the price cannot
be read, but looked and pointed like an active one. It is dimmed and shows
the not-allowed cursor now.
Saved place price (#2471)
- A price above zero that would be left without a currency is refused
with a 400, over REST and through update_collection_place alike. A list
has no base currency, so such an amount was read in each viewer's own
default currency and went into a trip as the trip's. A price sent alone
keeps the stored currency, and a zero price or clearing both fields
still goes through. The check sits in the service because the MCP tool
spreads the contract's shape, where a refine would never arrive.
- An older row that holds an amount without a currency shows it as a
bare number instead of in the viewer's own currency.
- The Hungarian hint uses the informal register of its file, which is
now prettier clean.
Immich certificate switch (#2475)
- The switch trusts one server. Saving a different URL without sending
it turns it off; saving the same URL keeps it as before. The wiki says
so.
Moving day (#2476)
- Google Maps and CoMaps are left out only when there is nothing to hand
over. A day with a single stop opens it as a pin again, on the desktop
and on the phone, as it did before.
- Desktop: a moving day whose flight or train has no stations shows no
route tools, since there is nothing left to draw. With stations they
stay.
- Phone: the drive between two stays on a day without stops or bookings
shows once at the top instead of again at the bottom.
- The export helpers take the carrier flags as one object instead of two
booleans in a row.
Import card (#2477)
- The success and error marks use the theme tokens.
- The e2e test names its upload with a made-up booking number.
Tests: COLLECTIONS-SVC-132 and 133, COLLECTIONS-E2E-088,
update_collection_place with a price and no currency, FE-COMP-COLEXTRAS-013
(011 adjusted), IMMICH-TLS-010, IMMICH-103 extended,
FE-PLANNER-DAYPLAN-222 adjusted and 224, FE-MOB-PLTL-051, FE-MOB-PTLM-047,
FE-W4BGT-023 and 024 check the mark colours.
A saved place always had price, currency, website and phone columns. Saving
from a trip, the file import and the copy into a trip all carried them, but
neither editor showed them and the update contract did not know them, so the
validation pipe stripped them from a PATCH and the MCP tool refused them as
unknown keys (#2471).
- shared: collectionPlaceUpdateRequestSchema takes price (not negative,
nullable), currency (three letters, trimmed and upper-cased), website
(http or https, as on save) and phone (trimmed, capped at 60 like the file
import). The save schema is unchanged.
- server: updatePlace writes the four fields inside the existing
transaction. update_collection_place spreads the same shape, so REST and
MCP take and refuse the same values; its description now names the price
and asks for the currency with it.
- client: the desktop detail sheet and the phone sheet edit price with a
currency picker, website and phone, and show them in read mode (price only
above zero, phone as a call link, website as a link chip through
safeHttpUrl). Both shells share one hook, useCollectionPlaceExtras, which
sends only the fields the user changed and always pairs a price with its
currency, since a list has no base currency. An amount that does not parse
marks the field and holds the save.
- i18n: collections.price, collections.priceHint and collections.phone in
all 23 locales; the website label reuses places.formWebsite.
- wiki: Collections and MCP-Addon-Tools name the new fields.
Tests: schema spec, COLLECTIONS-SVC-128 to 131, controller pipe parity,
update_collection_place with the new fields, COLLECTIONS-E2E-085 to 087,
FE-COMP-COLEXTRAS-001 to 012, FE-COMP-COLDETAIL-049 to 054 and
FE-MOB-CPLSH-042 to 046.
The share dialog stored the pick as String(value) while its options are
keyed by numeric user ids. CustomSelect looked the pick up with a strict
comparison, found nothing and left the trigger on its placeholder, although
the Invite button was already enabled and the invite went through. The
phone opens the same dialog from the Mehr sheet, so it showed the same.
CustomSelect now compares the held value and the option values as text, so
a caller holding "5" finds the option keyed 5 and the other way round. A
held null or undefined still matches nothing. onChange keeps handing back
the option value unchanged. No other caller mixes the two kinds today; the
place form had worked around the same trap by keying its options as
strings, and its comment now says why the string stays.
Tests: CustomSelect matches across both kinds and marks the pick in the
list, the desktop dialog shows the picked name and clears after the invite,
and the phone share sheet does the same through the real dialog.
Refs #2478
Maurice