Paddle tours are planned on the water by TREK's own router: a water network
per paddle region, built from the same Geofabrik extract as the obstacles and
searched in a worker thread of the server (no sidecar). Rivers, canals and
lakes (direct or along the shore), portages round weirs, locks by policy,
whitewater by boat, gaps marked. Found portages and locks become points of
their own; an unplannable leg says why and offers a way out.
- Shaping points: a click on the line sets a point that steers the route
without being a stop (hikes and paddle tours); recompute a single leg.
- Lake style direct/shore, suggested from the wind forecast.
- Regions load by themselves where a paddler plans (admin setting: automatic,
on request, off; size cap and a daily count), with requests for the admins,
a notification, and the load followed on the leg.
- Portage from the last point, portages follow footways via the walking
router (or stay straight), "put in here" on slipways and put-ins.
- MCP plan_paddle_route with the REST route's rules.
The list of who a linked trip lets in took MJourneySettingsSheet past the 300-line limit for a component (max-lines-per-function), which turned the client lint on dev red. It is MTripAccessList beside it now; the markup is unchanged.
Under the contributors, the journey settings on desktop and phone get a section of their own, Through trips, with everyone a trip's journal link lets in, their role and the trip they come through. It is read only there, since the trip's settings manage it, and it leaves out whoever is a contributor already. getJourneyFull answers it as trip_access.
The settings button was a bare round icon next to the trip's back pill; it is the same pill now, with the gear and the word Settings. The settings dialog opens centred again: its fixed height already keeps it from jumping between areas, so it does not need to be pinned to the top.
The dialog's nav buttons are named by their area alone (aria-label), so a hint line naming invites no longer matches the invite button. The sharing cases open the Sharing area first, the wiring and More sheet tests drive the settings button and row, the hook test reads the toasts as keys (renderHook loads no locale), and the lazy list and store registry know the journal panel and store.
lint:i18n-keys only reaches a key through a literal t() or a *Key property: the three save toasts were passed to run() as bare keys and the tab label came out of TRIP_TAB_LABEL_KEYS, so four new en keys counted as unused. They are translated where they are named now.
index.css is held at its line baseline. The two variables the embedded journal overrides (--nav-h on the desktop, --m-safe-top on the phone) now sit as arbitrary properties on the wrapper that needs them.
useTripJournalLink had grown past the 120-line limit for a function. The member list (candidates per journal, roles, who is new) is now useJournalMemberChoice. What loaded is kept with the journal it belongs to, so a new pick shows nothing until its own people are in, without resetting state by hand. The integration test adds its trip members with Promise.all.
The Share button becomes the trip's Settings, a round button beside the back
pill. The dialog is rebuilt around three areas (People, Sharing, Journal) with
a side navigation, a fixed height and 960 px width on wide screens.
Journal links one of your journals from the Journey addon to the trip. Every
trip member is ticked as a reader by default, each can be raised to editor or
left out, and the people a save would let in for the first time are named
before it saves. The link can be changed or removed. With a link the trip gets
a Journal tab on desktop and phone that shows the Journey addon's own view,
live through its sync and trip:journal:changed. Nothing shows with the addon
off.
members.shareTrip and nav.share are gone with the button that used them.
A trip can now show one journal from the Journey addon as its own: any
journal its owner picks, and one journal on as many trips as they like.
The trip members chosen for the link get into the journal as viewers or
editors, see it in their own journal list and follow it live, for as long
as the link holds them and they stay on the trip.
That access is never copied into journey_contributors. It is read where
journal access is read: the contributor repository answers with the
stronger of a direct role and a link role, the journal list and the live
update recipients take the link members in, and the photo access check
goes the same way. Every one of those reads starts from linkReach, which
only counts members still on the linking trip, so unlinking, deselecting
someone and their leaving the trip all end exactly what the link gave.
A member who leaves is also taken off the link, so coming back later does
not quietly reopen the journal.
Linking or changing the members takes the journal's owner and the new
journal_link trip permission (trip owner by default); unlinking takes
either. /api/trips/:tripId/journal answers the link as each member may see
it, /candidates says who a journal would be opened to for the first time,
and four MCP tools do the same over the same service. A trip:journal:changed
event tells the trip to look again.
A flag set on dragstart could still be unrendered when a quick drag reached
the next card, and the drop was lost. The category now travels in the drag
under its own type, read from the first dragover on and at the drop.
Categories showed in the order they were created, which a list kept per day
cannot undo once the days swap. A grip in each category's head band moves
the whole category onto another's place on desktop. A category has no
position of its own, it shows where its first item is, so the move reorders
the items as one block through the item reorder the list already has: no
new column, and the order reaches everyone the way a dragged item does. The
other view's categories keep their order.
On the phone the Transports tab never rendered a booking's notes, so what
someone typed into a flight was only to be found by opening its sheet,
while the booking cards next to it showed theirs. Both cards now take the
notes from one part, sized on the caption tier so the text size setting
reaches them.
The public OSRM hosts answer 429 above about one request a second. The trip
overview and the road trip waited that out and asked again; the day route
took the first refusal as final and drew straight lines between the stops
until the next edit, which is what a day with a change of mode or a quick
switch between days ran into. Both the day route and the overview now go
through one retry helper: a rate limit is waited out, as long as the host
asks when it says, and a refusal the host meant still ends at once.
The login went to auth.cgi with account and password JSON-quoted, the way
the FileStation calls on entry.cgi take their values. entry.cgi reads JSON
where it can; auth.cgi takes a value as it comes, so DSM looked for a user
named "trek" with the quotes and refused every account. Both go plain now.
The test verdict sat truncated next to the dialog buttons ("The credentials
were re..."), with nothing to read the rest by. It wraps to two lines and
shows the store's own reason on hover; the phone sheet prints it below.
Closes#2666
The public page showed places.duration_minutes under every stop, and that is
60 on every place nobody set a road-trip stay for, so a shared plan read "1 h"
everywhere. The stay is now the stop's start to end time, per visit, past
midnight included, and a stop without an end shows none.
Closes#2676
The tour list row puts the description between the name and the badges.
The badges keep the three that matter most (time, then a paddle tour's
check bench and distance, or a hike's distance and climbing) and only
those that fit whole, so a narrow sidebar shows two instead of cutting
one off. A check bench without obstacle data shows no pill in the list
or the day plan; the checklist still names the gap.
The checklist and the obstacle data sorted texts without a compare
function. They now sort by code units through one shared compareCodeUnits,
the order a bare sort gave, the same on every machine; the material data of
a lock's parts no longer orders by the server's locale, so its hash cannot
change with it. The note editor takes the focus through a ref instead of
autoFocus, a direct function reference in a map becomes a call, and the
GPX import's default fields are a named constant.
A save answered on one tour no longer clears the pending state of a save
started on another. A checklist changed here offline waits for the queue to
replay before it is read online, as a bench of such a write already did. A
saved tour the list has not loaded yet is no unsaved paddle draft, and Next
walks the rows as the list shows them, a vanished object among them.
A decision answered after another tour was opened no longer replaces that
tour's checklist. A decision made offline on a checklist already older than
the route stays marked as such, and once online a bench from a write made
offline waits for the queue to replay, then takes in the server's. While
the checklist reads again it stays in view, locked, so a panel open on the
map keeps its note. A saved tour turned into a paddle tour asks to be saved
first, a vanished obstacle stays among the rows, Next follows the list
order and keeps the focus in the panel, a note closes only once saved, the
earlier choice in review is named for screen readers too, planning a
portage is offered to editors only, and the map card scrolls within the
screen. A tooltip of several lines breaks at them. A page test waits for
the tours row instead of reading it at once.
The tour map stage and the trip planner page hook had grown past the
complexity and length the lint ratchet holds them to. Marking a spot on a
recorded paddle track moves into useTrackLinePick, and what the planner map
frames into usePlannerFocusPoints, each with its own tests. The planner's
viewport snapshot no longer reads a ref while rendering, so the count of
that warning goes down by one.
PAD-06 and PAD-09 on screen. A paddle tour open in the planner or shown as
recorded carries a checklist card: the obstacles of the data along its
route in route order with the paddler's own portages and locks among them,
each with its status, its paddling rule and the SUP advice at a lock, and
the earlier decisions the route or the data no longer carries behind a
fold. A row moves the camera onto the obstacle and the other parts of its
lock and opens its card on the map, where the decision panel sits: four
choices, the notices that stay after a choice (a ban, the SUP advice, a
portage still to plan), the date of the last check on site, a note and who
decided when. An object the map does not hold opens in a dialog instead.
Deciding waits while the route has unsaved changes, and a stale or dirty
list is dimmed, never hidden.
The tours list, the desktop day plan and the phone day plan show the bench
as one pill, the tour detail shows it with the data's date, and every paddle
tour reaches the safety note from its footer. Nothing reads as safe where
TREK knows nothing, and nothing blocks.
PAD-06 and PAD-09 on the client's data side. A tour's cached row keeps its
checklist beside its provenance, written through one cache helper by the
repository and the queue replay, which also keeps provenance an answer
lacks. The checklist is read for the bench the list shows and served from
the cache while its revision matches. Decisions made offline, or behind a
queued write of the same tour, change the cached checklist and bench at
once under a local revision and replay with their idempotency key; a route
written offline marks the checklist stale until the server judged it.
The obstacle store learns a camera focus: a click in the rail moves the
camera onto an obstacle and the other parts of its lock, the newest of such
a focus and a picked search result wins, and a selected lock lights up
whole on both maps. The checklist hook and its model hold the logic the
cards will show.
PAD-06 and PAD-09 in shared. A paddle tour's checklist lists the obstacles
of the OpenStreetMap data along its route, each bound to a basis: the route
near the obstacle as samples around every passage, and the material data of
the obstacle as a hash and its position. A decision keeps that basis, so it
reads as one to check again once the route or the data changed there, and a
portage decision holds while the paddler's own portage carries round every
passage. The check bench sums the list up for the tours list and the day
plan. Nothing in it is a safety or legal clearance.
The route relation learns the passages of a route by an object and the
distance of a point to a route. The client takes the obstacle key from
shared instead of its own copy.
PaddleRegionsRepository types and writes the status through the generated PaddleRegionsStatus instead of a copy of its four values; the paint tokens, a fact key type and a minutes input stay private to their modules, the wind test pins its 502 text, and the planner page's size entry follows it down.
The time card's estimate with water, portages and locks and a lock without times leaving it incomplete, every state of the wind card with day switching and missing values that never read as calm, and the track marks with their tools, minutes, removal and saving through the repo.
Thirteen client suites for the paddle obstacle work and the region admin: the detail model and card, the overlay with its outside press and Escape, the Leaflet and GL layers with the area zoom threshold and the single click handler, the route band marks, every state of the obstacle notice, the sync hook, the tiled obstacle repo, the online only region repo, and the regions panel. The wind hook for the start of a paddle tour is covered too.
PAD-05B: a click on an obstacle on the map or on the route band opens its card in the look of the via ferrata card: the kind with its glyph, the name, how it stands to the route (on it at a distance along it, near it with the link marked unclear, or only in the area), the paddling rule its tags give with canoe read before boat, a condition as written, height, grade, hours and fees, the source with the date of the data and the OpenStreetMap link. A missing rule reads as unknown, never as allowed, and a portage way recorded as private says so. Objects only in the area show from zoom 13 on, on Leaflet and GL alike; on GL the lines only near the route are dashed as on Leaflet, one click handler picks the marker over the line, and a picked marker no longer flickers. The route band marks the obstacles on and near the route by their share of the measured line. The obstacle notice also names an answer cut at its limit.
PAD-05A: the admin area gets a Paddle water data card under the addons, on desktop and phone: a search in Geofabrik's list with each region's path, the regions with their state (waiting, reading with its progress, ready with objects and data date, failed with the reason), reading again and removing after a confirmation. The list follows a read without reloading. Region changes write audit rows.
Map colours of paddle objects and portages come from theme tokens read at draw time, as the via ferratas do; the ferrata layer now shares that reader. The rail takes the planner page's parts as one bag, the map hit tests of the tour layers are one helper, and the unused noWaterData string is gone from every locale.
PAD-03 portages and locks on planned tours and recorded tracks, PAD-07 paddle time with portage and lock stops, PAD-08 wind forecast for the start, PAD-05A regional obstacle import from Geofabrik extracts with admin endpoints and a monthly refresh, PAD-05B first cut of the obstacle layer on Leaflet, GL and 3D. Work in progress: checklist (PAD-06), check bench (PAD-09), admin UI, translations and tests follow.
- Paddle as a plannable tour type: one boat (kayak, canoe, SUP, other), river or
lake, a pace that a boat change never overwrites; time is distance over pace
- Hand-drawn legs beside routed ones, drawn dotted and labelled as not routed,
kept through save, reopen and edits elsewhere
- Reverse a tour and close it back to its start, each one undo step
- GPX import shows a preview first (line, measures, duplicates, type) and only
the confirmation stores the tour
- Base maps and overlays per tour type in the planner: hike keeps topo and the
via ferrata layer, paddle gets the OpenSeaMap seamark overlay
useToast handed back a new object on every render. useWandererConnection lists
toast in its load effect, so each keystroke reloaded the saved settings and
reset both fields to them.
The repository stubs of the tour service tests answer findProvenance, which getTour and createTour read since P2C-02.
Switching the Tours addon off now ends live MCP sessions like every other addon that gates a tool (MCP-GATE-PARITY-001).
copyTour refuses a line without a point instead of placing the copy at 0/0, and new tests cover the reachable paths
of the copy, the source check and the provenance of a snapshot without its import record, including a trip copy
keeping that record. On the client the shared day assignment hands the plan exactly the tour and the day, the new
visibility store is reset between tests, and the tests of the sidebar, the detail, the phone sheet and the origin
section match the views this PR built.
- P2C-02: tours record their origin (planned, GPX with file name, wanderer)
instead of reading it off their shape; the detail answers a provenance
contract and a trip copy keeps a tour's import record
- MF-03: a wanderer snapshot's source can be checked on purpose, read only,
with a confirmed reimport as a new snapshot
- PR1-18: every way of putting a tour on a day shares one set of rules
- PR1-07/08: each person can hide tours from the trip map; the list shows
each tour's line colour and the picked tour stands out on both maps
Maurice