Three things the first pass got wrong.
A stop a booking puts on the day is for road trip mode, which needs the
hotel in the driving chain. The day planner already shows that booking as
its own overnight block, so the row there would be the same hotel twice.
It is hidden in Days whatever the service-stop switch says, and the switch
goes back to meaning what it says: the petrol stations the traveller added.
Cancelling a night from the road trip popup took the stop with it. That
control means "this is a pause now, not a night", and the stop sits
mid-drive where re-adding it would land it at the end of the day. The
booking now hands the stop over instead of deleting it.
Moving a booking whose stop belongs to the traveller put a second one on
the new day and left the first behind, which is the duplicate this change
exists to remove. Only a booking's own stop moves now. Stays booked before
this shipped get theirs from the migration, not from the next edit they
happen to receive.
The day's accommodation is drawn as a leg to the first and from the last
waypoint. Now that a booked night puts its hotel on the check-in day as a stop
of its own, that last waypoint IS the hotel on most days, and the leg drawn to
it is a round trip of zero kilometres: in the map line, in the sidebar's leg
list and in every exported directions link, which carried the hotel twice in a
row. The defect already existed for a night booked in the road trip; the change
above would have made it the normal case.
Both bookend rules now decline a leg whose edge stop sits at the hotel's own
coordinates, which covers the map, the sidebar, the phone route and both export
links from one place. Compared by coordinates rather than ids, because the
bookend comes off the stay row and the waypoint off the assignment.
The server announces the day stop over the socket like any other assignment,
but the socket deliberately skips the session that sent the request, so the one
person who could not see their new stop was the one who had just booked the
night. That looks exactly like the bug it fixes.
The stay writes hand their answer to one applier, which folds the stop into the
store through the same path the socket uses, so the IndexedDB write-through
happens either way and the dedupe by assignment id comes for free. Three
surfaces call it: the day-detail picker, its edit branch and the phone sheet.
The road-trip flow does not, because it writes its own assignment before the
stay and there is never a mirrored stop to apply.
The trip planner and the journal get a "From Dawarich" list: the stays
recorded for those dates, each one a row that can be dismissed or turned
into a place or an entry after a review step that shows time, name, note
and day. A place that came from a recording carries the Dawarich mark
next to its name so its origin stays visible afterwards.
The recorded route lies over the trip and journal maps as an overlay,
coloured per day and cut along the reader's own timezone rather than
UTC. It is fetched for the window on screen and never stored.
The Atlas gets its own panel beside the map for the countries and cities
the recordings prove, and the wish list is ticked off there, on the day
of the visit, undoably. The phone has its own take on all of it, in the
mobile shell's colours and with native sheets.
Three small things noticed while working nearby, none of them Dawarich:
The map's layer switcher showed the browser's own tooltip while every
control beside it showed TREK's, so hovering along the row produced two
different boxes in two different styles.
The journey entry editor mixed TREK's date picker with a native time
input, and the date, which is the longer of the two, had the narrower
column: "12. Sept. 2026" wrapped while the clock sat half empty. The row
is split in the date's favour now and the picker is disabled together
with the rest of the form instead of staying live behind it.
On the phone's journey, the dock's "+" now turns into an upload button
while the Gallery tab is open, which is what that tab's one big action
actually is.
A key could only ever read everything a user owns. When a second service
reads TREK on that user's behalf, that is more than it needs: Dawarich
wants trips, days and places, not notes, bookings or the wish list.
Keys can now be minted with an explicit list of areas, checked in the
guard and shown when the key is listed. Keys that existed before this
keep full read access, so nothing that works today stops working. A key
marked as limited whose list cannot be read grants nothing rather than
everything.
The tab was built to its own pattern: a bold title where the other four
carry a small uppercase one, a counter instead of the add button, the add
form as a light block sitting on top of the list, and a grey line of text
where every other empty panel shows the mascot. Side by side with Notes it
read as a different app.
It now uses the poll panel's shell: the same header, the same pill button
top right, the same modal for the form, and the mascot holding a chain.
The load effect depended on the toast and translation objects, both of
which are new on every render, so the list refetched constantly and a link
that had just been added was dropped again by the response in flight. It
depends on the trip alone now, and reads the other two through refs.
The place search provider block now renders on a managed install too, and
there the key fields are empty by design: the operator owns the credentials
and user-profile never sends them. An operator key set through the
environment is invisible in the fields either way. The warning behind the
provider select read those fields, so it told every managed admin that
search "falls back to OpenStreetMap" while their key was answering.
app-config already carries the answer as has_maps_key, and it resolves the
same chain the search itself uses, environment included. has_amap_key sits
beside it, so both come into the store at boot and both follow a save.
The API keys card was hidden wholesale on a managed install, which took
the provider choice with it although the server leaves places_provider
to the admin there. The card stays; the keys, their Save button and the
Google switches fold away, on the phone shell now too. The mobile
warning uses the pending token instead of an undefined one.
The desktop tests find a key input through its labelled toggle rather
than by position, which is where the accessible name sits.
Without a Workbox rule for is.autonavi.com the offline pre-download
fetched the tiles and stored none of them, the hole #2180 closed for the
OpenStreetMap DE and Stadia presets.
The journey map read the same tile setting as the planner but built its
Leaflet map without the shifted CRS, so an Amap basemap put every entry a
few hundred metres off. A change of datum rebuilds the map, since Leaflet
cannot swap a CRS after construction; every other template change still
retiles in place.
An Amap row now carries the same source mark the TREK index, OpenStreetMap
and Google rows get, named per locale because 高德地图 is the name it goes
by where it matters. The "search is on OpenStreetMap" notices and the
key hint in the details column are gone with the keys dev had already
removed, and the client-side provider mirror with them.
amap_poi_id travels with a picked result into the form, the details
column and the shadow log, so a saved place keeps the id it was found
by. A pasted Amap link goes to the resolver like a Google one.
The mobile Costs tab swallowed a failed settlement request, and the final
budget card then filled every traveler's row from the empty fallback: "0.00"
for everyone, which reads as "the trip cost nobody anything". The desktop
panel already keeps a settlementError flag and prints its notice instead of a
number; the mobile tab now does the same in the final budget card.
The three figures under a traveler's final budget came from the server, netted
in integer trip cents at the rate frozen on each expense. The rows listed under
them did not: both shells converted the expense list again with whatever live
rate they had, and with none loaded yet (first render, offline) the raw foreign
amount went out under the display currency's symbol. On any trip with a
foreign-currency expense the rows could not add up to the line above them.
The settlement response now carries the rows with the figure: `sources` on each
finalBudgets entry lists what the person fronted per expense, the recorded
transfers on their side and the open flows, in display cents. They are filled
by the same two loops that fill the totals, so an expense with no split members
stays out of them as it stays out of the ledger, and each list is spread over its
figure's already allocated cents with the same largest-remainder split, so the
sum is exact in every display currency. The shells print those cents and only
resolve names; the rows carry the sign of the line they sit under.
The settle-up view says who owes whom, but nothing on the Costs screen
answers "what did the trip cost me": the balances move every time a
payment is recorded, and the tiles only describe the signed-in user.
The settlement response now carries finalBudgets, one row per participant
in the ledger: expenses (what they fronted on split expenses), reimbursed
(recorded transfers, received minus sent), pending (their current
balance) and final = expenses - reimbursed - pending.
- Computed in calculateSettlement from the same integer trip cents as the
balances, filled by the same loops, so the breakdown can never
contradict the balance printed next to it. Each component is converted
to the display currency as its own set and the final is subtracted in
display cents, so the three lines add up to the total in any currency.
- A "Final budget" card on desktop, the narrow desktop layout and the
mobile Costs tab: one amount per traveler, and a tap opens the three
lines plus the expenses, transfers and open flows behind them. The
filtering lives in CostsPanel.helpers so both shells share it.
- Contract in shared (budgetParticipantFinalSchema); the MCP
get_settlement_summary description mentions the new field it returns.
- Four new costs.* keys, translated in every locale.
Anchoring the flipped popup to the trigger's top edge dropped the old
vertical clamp: with a short viewport the popup's top edge left the screen
and the month header became unreachable. The popup now flips up only when
there is room above; otherwise it stays below and is clamped so its top
edge never leaves the viewport.
The mobile payment sheet always sent the display currency, while it seeded
the amount raw in the currency the payment was recorded in. Correcting only
the day of a 1000 JPY payment turned it into 1000 EUR and froze a fresh FX
rate for it. The sheet now carries its own currency, seeded from the
payment (or the display currency for a new one) with the same picker the
expense sheet has, and the payment row shows the recorded amount next to
the converted one when they differ, like the desktop row does.
The day is now required in both payment forms. Cleared, the server stored
NULL and the ledger quietly fell back to the day the payment was recorded.
Editing/undoing a settle-up payment was desktop-only — the mobile ledger
row rendered it read-only, with a comment explaining the gap was
deliberate for now. Give it the same edit/undo affordance the expense row
already has: edit reopens AddPaymentSheet pre-filled (now doubling as an
edit form, same as desktop's SettlementModal), undo deletes it outright
with no confirmation, mirroring CostsPanel.tsx's undoSettlement.
CustomDatePicker flipped above a trigger by subtracting a fixed worst-case
height (360) from its top, regardless of the popup's real rendered height.
When that guess overshot — a short calendar view, or a form with little
room, like the settle-up modal — the gap left the popup floating away from
its trigger and over unrelated fields instead of sitting right above it
(#2334, found while testing the settle-up date field).
Anchor the flipped case from the trigger's own top edge via `bottom`
instead, the same technique useAnchoredPosition already uses for other
popovers, so the popup is always flush against its trigger no matter its
actual height.
The settle-up form only exposed from/to/amount and silently dated the
payment by created_at, unlike a regular expense which has an editable
date. Add a settled_at column (independent of created_at, same split as
expense_date) through the schema, migration, service, REST and MCP
surfaces, and the desktop + mobile forms; the ledger groups a payment by
settled_at, falling back to created_at for rows recorded before the
column existed.
The one model the addon offers to pull was Qwen3 8B, which is text-only, so a
scanned page or a photographed document reached it as no text at all and came
back empty. Qwen3.5 4B is multimodal at a third of the size: one download
covers every kind of document instead of leaving the operator to work out that
the recommended model cannot read half of them.
The list stays one entry long. A self-hosted host needs a model, not a menu,
and any other id can still be typed in or picked from what Ollama already has.
Sharing a list works between people on the same TREK. This is the other
case: giving one to somebody who runs their own, or keeping a copy. Export
sits beside Edit and Share in the list header and downloads the open list;
Import sits beside New list in the rail, reads a file, shows what is in it
and makes a new list of it. Desktop only, which the route already decides.
What travels is what somebody wrote down: the list's name, colour and
description, its labels, and each place with its address, coordinates,
notes, status, contact details, category name and labels. A file is dull
JSON on purpose, so it can be read and edited by a person.
What does not travel is everything that only means something on the instance
it came from. Ids of every kind, since the receiver issues its own and a
category crosses over by name. Star ratings and members, because a rating is
an opinion somebody gave the people on that list. Provenance into trips,
which points at rows the receiver cannot see. And an image path under
/uploads, which resolves on the sender's server: only an absolute https URL
survives.
A file is a stranger's JSON and is read as one. It is parsed in the browser
that chose it and never uploaded; the parsed list goes through the same
contract on both sides; and a link that is not http(s) arrives as nothing
rather than as an anchor. Strict where it must refuse, forgiving where it
can drop: a file that does not say what it is never reaches the importer,
while one unreadable place inside it is skipped and counted, and one bad
field on a good place costs that field alone.
An import is always a new list. Importing into an existing one would mean
deciding what happens to a place that is already there, and every answer to
that is a merge nobody asked for.
Maurice