Two reports, one line: the automatic bounce to the provider in useLogin,
which fires whenever password login is off. Both reporters are on an
OIDC-only install, which is what arms it.
#2126, the redirect loop. The re-entry guard sat inside the oidc_code
branch, but the exchange strips oidc_code from the URL before it
navigates away. Any re-run of the effect during that window - and t is a
dependency, so a language change is enough, which every non-English
install does on the login page - read an empty search, missed the guard,
fell through to the config probe and bounced to the provider. The
provider answered silently, landed back on /login?oidc_code=, and round
it went. Each pass mints a valid session, which is why closing the tab
and reopening lands the reporter logged in. The guard is now the first
statement of the effect, so no re-run can reach the redirect.
#2123, logout that logs you back in. The brake for the bounce was
noRedirect in router location state, and it does not survive the trip:
logout flips isAuthenticated on a sync lane while the router defers its
location update, so ProtectedRoute renders once on the old route and
emits <Navigate to=/login replace> with no state, overwriting the entry
the logout handler had just pushed. Location state cannot cross a full
document load either, and api/client.ts performs one on any 401. The
fact now lives in sessionStorage, set in authStore.logout() so all seven
sign-out call sites are covered, and cleared on any successful auth and
on the manual SSO links. Per tab, so a fresh tab still single-signs-on -
that being the point of single sign-on.
Both tests were confirmed red without their fix and green with it. The
first needed rewriting to do that: the obvious version held the page
mounted past the window the race lives in and passed either way.
Not included: RP-initiated logout at the provider. TREK clears its own
session correctly, and ending the provider's is a separate decision -
it needs an end_session_endpoint the provider may not advertise, a
post_logout_redirect_uri registered on their side, and an answer to
whether signing out of TREK should sign you out everywhere.
FE-ADMIN-STOR-036 went red on a loaded runner while every assertion in it
passed on the run before. The two storage tests that capture the migration
POST body read it immediately after awaiting the "Storage configuration
saved" toast - but that toast comes from the PUT, and AdminStoragePanel fires
the migration POST from a later effect reacting to the refreshed admin.state.
The two are not the same tick, so reading the body straight after the toast
only held while that effect happened to flush first.
Both now await the body through waitFor. A genuine regression still fails,
with the same assertion error, once the wait times out.
CARTO started stamping "API KEY REQUIRED" across every keyless basemap tile
on 26.08.2026. #2060 added a key field as the immediate answer, but it leaves
a self-hosted instance needing an email exchange with CARTO before its maps
look right, and every default in the client still pointed at CARTO. Default
to OpenFreeMap Positron instead: no key, no account, no request limit,
commercial use allowed, attribution required.
OpenFreeMap serves vector tiles only, so the Leaflet basemap is a MapLibre
style document rather than an XYZ template. maplibre-gl-leaflet hangs a GL
canvas into Leaflet's own tile pane, which leaves everything above it alone -
markers, GeoJSON, clusters, plugin layers, the custom panes, and the click
handling, since Leaflet's CSS already puts pointer-events:none on that layer.
maplibre-gl still arrives only through a dynamic import, so no chunk that
draws a map grows by a megabyte.
Switched: the trip planner, the MapView fallback every preview goes through,
the journey map, collections, the atlas, the shared trip page and the offline
tile prefetch. OpenFreeMap Positron and Bright join the tile presets in
settings, the admin defaults and both mobile screens.
A CARTO template that is already saved keeps working when a key backs it -
that stays a supported choice. Without a key it is not drawn at all:
resolveTileUrl falls back to the default rather than to a watermark, so an
instance that upgrades with one in its settings sees the new basemap
immediately and needs no migration. The stored value is left as it is, so the
Map settings tab still shows what was chosen and the warning underneath it
explains why - one sentence appended, in all 23 locales.
OpenFreeMap asks for a credit of its own; OpenStreetMap alone under its tiles
is wrong and a licence problem. attributionForTile() derives it from the URL
rather than from a flag at each call site, and the shared trip map, which
carried no attribution at all, now gets one.
Offline maps keep working and get cheaper. A vector style is four things
instead of one, so sync/glPrefetcher.ts walks the style document, its sprite,
the Latin glyph ranges of each font stack it uses, the TileJSON - the planet
path is versioned, so guessing it answers 200 with an empty body - and then
the .pbf tiles. Over the Berlin bounding box TREK computes, raster z10-16 is
2237 requests and 34.6 MB and gives up above z16; vector z10-14 is 177
requests and 32.1 MB and stays sharp above that, because MapLibre scales the
z14 tile rather than asking for another. The Workbox rule for
tiles.openfreemap.org moves to CacheFirst and shares the prefetcher's cache,
so browsing tops a downloaded region up instead of filling a second copy
beside it - a versioned tile path can never be stale. Clearing offline maps
clears it too.
The atlas loses its second raster layer. It existed to warm the HTTP cache of
neighbouring zoom levels, which a vector basemap does not need; a second one
would only cost a second WebGL context. OpenFreeMap has no label-free style,
so its labels are switched off on the live map instead - they are all symbol
layers, while borders and coastlines are line and fill - re-armed on
style.load so a theme switch keeps them off.
Theme changes call setStyle in place rather than rebuilding the layer: a swap
per toggle would leak a WebGL context, and browsers cap those in the low
teens.
The place pins visibly swam back and forth while the map was dragged and only
settled onto their real position when it stopped. The clustered bubbles never did,
and that is the clue: those are drawn inside the canvas, the pins are HTML.
A library Marker repositions itself on the map's 'move' event, which fires once per
pointer sample, while the canvas is redrawn once per animation frame. When the style
is heavy or tiles are still streaming, the pins therefore run ahead of the map they
are supposed to be pinned to.
They now live in their own layer inside the canvas container and are positioned from
the map's own 'render' event, so pin and map move on the same clock. Mapbox keeps the
library marker: its terrain path needs the altitude handling that comes with it, and
the drift was never reported there. Clicks, hover and dragging a pin onto a day are
untouched — they hang off the element, which is the same element as before.
Auto layout wrote journey data straight into the document without holding
it to the caps the contract sets, and the save path sends the document
unvalidated - so the route refused the whole body with a 400 and the
editor reported "couldn't save" for the rest of the session, because
autosave kept offering the same rejected book.
The everyday way in was the itinerary list: thirteen stops a page over
two pages is eighty elements on a spread capped at sixty, so a run of
twenty bare stops was unsavable and a longer one put two spreads over.
Sixty was below what this app's own layouts draw, which makes it a bug
with a constant in front of it rather than a limit, so the cap goes to
ninety and the page keeps the design somebody chose. It stays a
serialisation limit: the largest document the contract now admits is
under four megabytes against the book route's eight.
A long journal entry, a long place name, a journey past eighty countries
and a long title each did the same thing on their own, and a bound story
did it on open without anyone touching Auto layout. The caps become named
exports on the contract and every producer builds against them, so the
two cannot drift apart again - which is also why the stations chunk is
derived from the cap and the salvage fixture counts off it.
Fixes#2085
The dashboard rendered its finished empty state while it was still fetching: no
hero, no cards, and a stats row reading zero everywhere. On a slow connection
that reads as "my trips are gone" rather than "not here yet", which is what the
report describes.
The stats row was the worse half. It comes from a separate call that carries no
loading flag at all, so every tile fell back to its zero until the response
landed. A dash placeholder says "not yet" where a 0 says "none".
The skeletons already existed. SpotlightSkeleton and TripCardSkeleton were
written for this page, described as matching its layout, and never wired up:
JourneyDetailPage was the only consumer of that module.
Fixes#2115
A permit valid for one day has no clock on either end. isEndBeforeStart filled
both missing times with midnight and then compared strictly, so start and end
came out equal and the form refused it: inline error, dead save button, toast
on submit.
It also made existing rows uneditable. A booking whose end is a bare date on the
start day is exactly what the booking import writes, and what the mobile sheet
has been allowed to save since 72a82b3c. Opening one of those on the desktop
left the save button dead with no way to clear it.
With a time missing on either side the booking is all-day, so only the dates are
compared. An end date before the start is still refused, with or without times,
and two explicit clocks still have to be in order.
The hotel guard comes along for the same reason mobile carries it: the date
panel is hidden for hotels, so switching type after typing dates left the button
disabled with its explanation inside the hidden block.
Fixes#2107
Every row of an expanded search result is anchored at its leg's start: the time,
the stop name, the platform. A leg's arrival appears as the next row's heading,
and the last one gets the closing row. The walking legs broke that and printed
their DESTINATION, which is the stop the next row already names.
MOTIS brackets every journey in walking legs, so the last leg of a real
connection is the walk from the arrival station to wherever you were headed.
Its origin is the stop you get off at, and because that row printed the
destination instead, the station had no row anywhere in the card and vanished.
The same branch blanked the time cell, so the train's arrival time went with it.
At the other end the access walk swallowed the origin the user had picked.
Rows now read from.name for every mode, and the walk says it is a walk in its
badge row instead. The platform tags along, which gives the exit row the arrival
platform it was already carrying. The time falls back to scheduledTime the way
the save path does, since a schedule-only feed would otherwise leave the row
that matters without a clock.
Fixes#2106
useTileUrl returns a new string once carto_api_key reaches the settings
store, which happens after the first render. That string was a dependency
of the effect that *builds* the Leaflet map, so the key arriving tore the
map down and built a new one.
Two things break in that window: Leaflet finishes a queued redraw against
the canvas renderer whose map has gone ("Cannot read properties of
undefined (reading 'save')"), and the country layer never comes back —
its effect only re-runs when its own data changes, so the rebuilt map
shows tiles and nothing else.
The template belongs to the tile layer, not to the map. Hold the layers
in a ref, read the template through a ref inside the build effect, and
setUrl them from an effect of their own. Same fix in JourneyMap, where
cartoKey and mapTileUrl sat in the dep arrays of the effects that draw
every marker and track.
Fixes#2097
Minting a key for other software meant finding it under MCP, behind a
heading about AI assistants and gated on an addon it does not need. It now
sits on its own in Settings, above the MCP block, and works on an instance
with MCP switched off.
Deliberately separate state rather than another branch of the tab's shared
hook: the section has to stand on its own, and that hook is already carrying
forty fields through three levels of props.
Translated into all 23 languages.
When neither the keyword table nor the model produced a type, the router wrote
"hotel" and cast whatever string it got to FlatType without checking it. A hotel
is a booking type, so a ferry voucher imported from the Transport tab opened the
booking form, which offers six chips and not one transport among them, and
"other" was the only honest pick left. An unrecognised string got through the
cast too and then vanished silently in nuExtractToKiReservations.
The type is validated against FLAT_TYPES now. When it cannot be read the item is
still extracted with the lodging shape so it survives mapping, but it says so,
and the tie-breaker #2080 added finally has something to fire on: isUnplaceableItem
only ever matched a type outside both form's vocabularies, and the server can
only emit its own eight, so on a real document it never matched at all.
The tab travels with the job instead of sitting in component state. The parse
deliberately outlives navigation and reload and the review is triggered by the
global widget on any page, so by the time it ran the state had remounted back to
its default and the context was gone.
Two domains an assistant cannot reach at all today need somewhere to hang,
so this is the credential half on its own, ahead of the tools.
files:content is a third mode rather than a second group. Listing the
documents on a trip and reading the bytes inside a booking PDF are different
privileges, and the plugin host already draws that line between
db:read:files and db:read:files:content. It is not implied by files:write,
the same way journey:share is not implied by journey:write; the policy's
fallback branch covers both.
settings:write is scoped to display preferences. Settings also holds the
webhook URL, the ntfy token and the Mapbox, Carto and LLM keys, so the tools
that ride this scope work off an allow-list rather than off the settings
row.
34 scopes across 16 groups, translated into all 23 languages.
Every push to dev has been red since the 4.0.0 bump, always on the same test:
FE-MOB-MSTOR-015, where the second queued migration POSTs while the first is
still running. It passes on the PR runner and fails on the slower push one.
Instrumenting the queue effect logs the whole story:
DEQUEUE files stateMigrations []
APPLY refresh ["running"]
START RESOLVED files error null
DEQUEUE journey stateMigrations []
The refresh had already landed the running migration before the single-flight
lock was released, exactly as intended. What fires afterwards is the effect of
a commit scheduled BEFORE the POST, so its captured admin.state is the pre-POST
world, and it runs late enough that the lock is gone. The lock is a ref and is
read live; the "is one already running" test was read off that dead closure.
Under load the two drift apart and a second migration starts on top of a
running one.
So the hook answers the question instead. It keeps its world in a ref as well,
written where the response is applied rather than when the render lands, and
storageBusy() reads that. The queue effect still WAKES on admin.state, it just
no longer DECIDES on it, and the server's one-job-at-a-time rule now lives with
the hook that talks to the server rather than twice in two shells. Same shape as
the dirtyRef/savingRef the hook already keeps for the same reason.
An earlier attempt made the panels refresh again after startMigration, which was
both redundant (startMigration has awaited its own refresh since #1949) and no
fix at all: the stale read is on the next effect run, not on that promise.
fix(import): stop reading tickets as lodging, and stop scroll escaping a dropdown
Two v4.0.0 reports.
The file importer classified nearly every transport document as a hotel. Its
keyword table tested lodging second, on a group that included "check-in" and
"check-out" — words printed on almost every ferry, train and bus ticket there
is — so a ferry ticket came back a hotel, and the review then handed the user
the booking form, whose six chips contain no transport type at all. That is
where "everything ends up as other" comes from: it was the only honest pick
left. Transport is tested first now, the lodging pattern asks for a word that
names lodging, and the rental pattern asks for a rental rather than for a
pick-up time that ferries and shuttles also print.
Two more in the same function. The flight path forces its type on everything it
returns, and it claimed any document with two letters followed by digits — which
is what a German rail number looks like, so an IC ticket was imported as a
flight without the keyword table ever running. It now stands down when the
document already names another kind of transport. And a type neither form can
express opened the booking form regardless; it now follows the tab the import
was started from, while a type either form knows still wins over the tab, since
one PDF routinely holds a flight and a hotel. An unreadable type reaching the
transport form arrives as transport_other rather than as a flight: a wrong
flight looks right enough to be saved unnoticed.
The other report: a dropdown inside a sheet scrolled the page instead of its own
list. The panel is portaled to document.body and positioned fixed, so its scroll
chain runs to the viewport rather than to the sheet it looks like it belongs to,
and nothing stopped it. Three portaled lists carry overscroll-behavior: contain
now — the select, the navigation menu (which reaches the phone through the place
sheet, not only the desktop inspector) and the phone day picker.
@
fix(planner): route a layover flight per leg, and count linked places as planned
Two v4.0.0 reports, both a surface answering a question with less than it had.
The map built its own waypoint order. It read the BOOKING position and never
expanded metadata.legs, while a multi-leg booking stores its position per leg —
so a Frankfurt to Vancouver flight via Reykjavik was dropped from the list and
the airport before it was joined to the airport after it in one driving run
across the Atlantic. It now takes the order from getMergedItems, the same one
the day plan renders, which brings the span filter and the leg expansion with
it. getMergedItems in turn had never read day_plan_position, the one slot the
map did read, which is how the two could disagree at all.
getTransportRouteEndpoints handed back the booking outermost airports for every
leg. A stop between two legs was therefore routed from the arrival airport back
to the departure one — a drive from Vancouver to Frankfurt with a cafe in
Reykjavik on the way. A leg now spans its own pair, when the endpoints line up
one per stop with the legs; anything ambiguous keeps the role lookup.
Being planned meant one thing: a day_assignments row. A hotel is linked through
its stay and a venue through its booking, and neither is ever dragged onto a
day, so both sat under Unplanned while the day header printed their names. The
three places that asked the question — desktop sidebar, map markers, phone
browser — now ask one helper that also counts a stay and a day-anchored
booking. A booking that names no day still counts as unplanned, because nothing
says when it happens, and the day plan renders nothing for it either.
@
fix(export): print the reader clock format, and split window bookings in the feed
Three v4.0.0 reports that all come down to a surface printing what is stored
instead of what the reader asked for.
The PDF (#2066) is assembled as an HTML string outside React, so no hook could
reach it and no time format was ever passed in. It printed the column: four
clock sites, all 24h whatever the personal setting or the admin default said,
and a place time typed by a 12h user came out as "3:00 PM" for a 24h reader.
Both export entry points now hand the format over the way they already hand
over the locale, and the four sites go through formatClockTime.
The journey editors (#2067) used a native <input type="time">, which paints
12h or 24h from the browser locale and cannot be told otherwise by any
attribute. Every other time field in TREK has used CustomTimePicker for exactly
that reason; the journey editor, its phone sheet and the phone place sheet were
never migrated, so the same place form obeyed the setting on desktop and
ignored it on a phone. The picker gained a disabled prop so the read-only
journey sheet keeps the affordance the native input gave it.
In the subscribed calendar (#2068), a booking that is a window rather than an
activity read as one block across its whole range: a week of airport parking
sat on all seven days. Both hand-overs now stand on their own — an hour each,
carrying what the block used to say — and the block goes. Only when the two
ends fall on different days: a same-day booking is one sitting, and a rental
with only its pickup geocoded keeps the block, which is the only thing holding
the return time and its zone at all. Rental cars were missing outright, because
the planner writes reservation_time = NULL when its optional time pickers are
left blank while still setting day_id, and nothing in the exporter ever read
the linked days. It reads them now, as the last resort, for every type — so a
hand-typed bus or train shows up as well.
@
fix(dashboard): fix the upcoming widget dropping bookings, and give it the stays back
Three things, all in the same widget.
reservation_time holds two shapes. The booking form writes the datetime-local
YYYY-MM-DDTHH:MM; day-anchored rows, the demo seed among them, hold a bare
HH:MM. The query compared the column against an ISO timestamp as a string,
where ":" sorts above "2": every booking from 20:00 on passed the filter and
everything before it silently vanished, and the order ran off the same column.
On the demo that is why the Broadway show shows and the ferry does not. The
query now separates the date from the time before it filters, so a value with
no date falls back to the day it hangs off instead of being read as one, and
the order is by day and clock. The demo seed writes full timestamps, which is
the shape every real write path already produces.
Hotels came out of this list because a stay covers a range and a week in one
would hold a slot for the whole week. Arriving and leaving do not: they are
moments, and they are the two worth reminding someone of. Check-in and
check-out now appear as their own entries, named after the stay place and
falling back to the linked booking. The stay itself stays out. The two carry
the accommodation id, so the list key had to take the type with it.
An unconfirmed booking looked exactly like a confirmed one. The status was
already in the payload and is now a badge, on both the desktop tool and the
phone widget.
@
The day-swipe move handler mixed classifying the gesture with following the
finger, which put it at cognitive complexity 20. The classifying half is a
pure question about a gesture, so it moves out as classifyLock: null keeps
waiting for the next move, dead and h end the same way they did before.
Also reads the reduce-motion flag through dataset, seeds the closest-year
reduce with years[0] so it cannot throw if the empty guard above it ever
loosens, and compares the in-flight preview entry against undefined instead
of leaning on a promise being truthy.
CARTO stamps an "API KEY REQUIRED" watermark onto every basemap tile
fetched without a key since 26.08.2026, and both CartoDB presets plus the
built-in fallback are CARTO. The key is free and needs no account, so add
it as a setting rather than dropping the provider.
carto_api_key sits next to mapbox_access_token: per user in Settings/Map,
instance-wide under Admin/User Defaults, encrypted at rest, injected from
CARTO_API_KEY on managed instances. Unlike Mapbox it never switches the
map provider, since a raster key says nothing about the renderer.
The key is appended as ?key= at render time instead of being stored in the
template, so a saved URL stays portable and survives a rotation. That is
also what reaches the four maps that pinned CARTO and ignored the user's
tile setting: atlas, collections, the public trip share and the public
journey. The two share pages read it from their token-gated payload, the
same way baseCurrency already travels.
Also lifts the release notice above page chrome. Its overlay sat at
z-index 50, under the Vacay mode toolbar at 61, so the dialog was neither
on top nor modal. Adds a six-step layer scale to index.css and moves the
three notice shells onto it.
Closes#2054Closes#2052
* @
feat(mobile): swipe the day details to step through days
The phone shell hangs the days off a chip rail pinned to the top of the
screen, which on a large phone is a thin target a thumb cannot reach one
handed. The day details fill the rest of the screen and did nothing.
They now take a horizontal swipe: left for the next day, right for the
previous one, with the panel following the finger, rubber banding at the
first and last day and springing back when the swipe falls short. The
chip rail is untouched and still the accessible path; a committed swipe
announces the day it reached through a live region, and the active chip
scrolls itself back into view once the rail overflows.
The gesture never calls preventDefault or stops propagation on a touch
event and sets no touch-action, so the browser keeps sole ownership of
the card scroll and of the header chip strip, and the long press reorder
bridge keeps its own 10px self cancel. In edit mode the swipe also
refuses to claim a press held past the bridge window.
@
* @
fix(mobile): line the map controls up and widen the POI bar
The compass sat on its own under the POI bar, centre top, while the
locate button floated 42px above the dock on the other end of the
screen. Both are one handed controls, so they now share the band just
above the dock: compass bottom left, locate bottom right, off the same
--bottom-nav-h the map already reads, a dock gap lower than before.
That frees the row under the chip rail, so the nearby places bar takes
the full width between the screen margins and its segments end up the
size of everything else the thumb aims at there. Desktop keeps the
floating, content width bar.
@
The UP NEXT card kept pointing at this morning's first stop hours after it had
started, and at day one of a trip that ended last month. A header promising what
comes next, sitting above something that is over. It now stays away on a day that
has passed and once today's timed plan has run out — a day whose stops carry no
times at all still shows its first stop, there is nothing stale about that. The
timeline card already collapses the reserved space when there is no up-next, so
the layout closes cleanly.
Seeding the plan day also lands on the next day still ahead when today falls into
a gap in the dates, instead of dropping back to day one. A trip that is already
over keeps opening on its first day.
And a day that was selected before the shell mounted now counts as seeded, so
clearing the selection is left alone instead of being re-seeded on the next
render — which is what the guard was there for in the first place.
Based on #2055.
The year list comes back sorted, so picking its last element meant Vacay always
landed on the highest year — add 2030 to plan ahead and every visit from then on
opened 2030. It now opens the leave-year period today falls into, falls back to
the closest year the plan has when that period has none, and keeps the year the
viewer is on when a live update reloads the list.
* Revert "chore(deps): bump dompurify from 3.4.11 to 3.4.12 (#1681)" (#1694)
This reverts commit 94736112cf.
* feat: add PhotoGrid and PhotoImg components for journey photo gallery display
* feat: implement JourneyPublicPage to display shared journey data with timeline, map, and gallery views
* feat: create MobileEntryView component for displaying detailed journey entries on mobile devices
* feat: add docker-compose configuration for video testing environment
* feat: add gallery view components with support for local photo/video uploads and external provider integration
* fix: green up the video layout branch
Four things stood between this and a merge.
index.css carried committed merge conflict markers. A format-on-save had run
over the whole file and collapsed `=======` and `>>>>>>>` onto the line that
starts the popup-tip rule, which makes .trek-map-popup .mapboxgl-popup-tip part
of a malformed selector list - so the parser drops the whole rule and the map
popup's tail comes back as the stray notch its comment describes. Nothing in CI
catches that; invalid CSS just disappears. The file is back to the dev version
with only the video block added, 1301 -> 1323 lines instead of 2057, and the
same for the lockfile, which had only picked up "peer": true annotations from a
different npm run.
PhotoImg referenced an onClick it never took as a prop - the click already sits
on the button wrapping it.
PublicPhoto did not declare media_type even though journey-share.service.ts
selects it in both queries, which is what the `as any` casts around it were
working around. Declared once, the way JourneyPhoto does, and the casts are gone.
The single-photo hero had moved to a thumbnail. Right for a video, whose
/original is the video file and leaves an <img> blank - but a photo hero is
deliberately full size, which FE-JRN-PUBWIRE-008 pins. It now picks per media
type.
---------
Co-authored-by: jubnl <66769052+jubnl@users.noreply.github.com>
Co-authored-by: Maurice <mauriceboe@icloud.com>
uploadQueue called crypto.randomUUID() bare, which is undefined on
non-secure origins (plain-http localhost and LAN installs) and threw
instead of uploading. Route it through randomId() like the other two
idempotency-key producers so it falls back to getRandomValues, and
update randomId's header comment to name all three producers.
The `| 0` truncation in colorForUserId/colorFor existed to coerce an
undefined user_id to 0, but the settlement API always returns user_id —
only the two BudgetPanel test fixtures omitted it. Add user_id to the
fixtures, switch both helpers to Math.trunc (with a Number.isFinite
guard in colorForUserId preserving the old undefined->0 behaviour), and
drop nothing else: TravelerPicker only ever receives required numbers.
iOS paints its own background inside a text control, and under color-scheme:
dark that fill is darker than the card the field sits on. The mobile fields
are deliberately bg-transparent because the row supplies the surface - which
is why the native fill has nothing covering it and shows through as a dark
rectangle, while a desktop field hides it behind its own background.
Closes#2028
The scan that replaced the parenthetical-stripping regex went into the Leaflet
overlay and its Mapbox GL counterpart as two byte-identical copies, which is
what the duplication gate caught. trackColors.ts next door exists for exactly
this reason - both renderers read a track's colour through one function so it
cannot come out different on one map than the other - so the cleaner follows it.
Behaviour is unchanged. The test brute-forces the new function against the regex
it replaced over all 55,987 names up to six characters of "ab() \t", and pins the
32k-space input that used to take a second.
The move to SonarCloud brought a wider rule set with it, and 23 more regexes
that can be made to hang on a crafted near-match. 21 are fixed here, each proven
equivalent to the pattern it replaces by brute force rather than by reading.
Two of them are reachable across users, not just by yourself. A reservation
endpoint name is free text any trip member types, stored and then read back in
every other member's browser while the map draws its labels, and the pattern
over it takes 2.3 seconds on a 32k paste - so one member could freeze the map
for the whole trip. The mobile transport sheet reads the same field. Both now
scan instead of backtrack, and both were matched against the desktop twin the
earlier sweep had already fixed rather than given a third spelling.
The markdown link stripper needed the same treatment as the tag stripper before
it: the label class cannot be disambiguated in the pattern, because it matches
an opening bracket as well, and narrowing it changes what "[a[b](c)" produces.
It is a scan now, with all four of the regex's quirks intact.
Also here: the two encoding warnings the scanner reported. A decorative comment
line in JourneyDetailPage.test.tsx had picked up a replacement character
somewhere along the way, and calendar.service.test.ts asserts on one
deliberately - that one is now written as a U+FFFD escape, so the file no longer
carries the raw bytes while the test says exactly what it said before.
Seven findings were deliberately not changed and are flagged in SonarCloud with
the reasoning. Five are false positives - patterns with no overlapping
quantifier pair, where the only cure would change how nested brackets parse.
Two are marked accepted rather than dismissed, because they are real: the readme
check's heading pattern has a proven linear replacement that cannot land until
the registry's copy of the same script can move with it, and
`export let JWT_SECRET` is what makes an admin's key rotation take effect
in-process instead of silently waiting for a restart.
The bulk of what SonarQube still had open on the reliability side, read site by
site rather than swept. Two clusters are worth calling out because they are
defects, not lint.
**Four regexes could be made to hang the process.** The worst is
`/.+@.+\..+/` in the forgot-password path: three unbounded `.+` that all
overlap, unanchored, on an endpoint that needs no login and whose schema is a
bare z.string() under a 100kb body cap. A thousand '@' characters had not
finished after 100 seconds — one request pins the event loop, and Node has one.
EMAIL_REGEX in auth.helpers is the same shape on register and profile update
(310ms for 8kb). The two tag strippers over an uploaded KML description and over
Commons metadata took 0.52s on a 16k run of '<'. Each rewrite was proven
equivalent by brute force against the original — millions of strings for the
coordinate patterns, 671,876 for the tag stripper — because a subtly different
regex on a parsing path is worse than the finding.
`<[^>]+>` could not be fixed in the pattern: `[^>]` matches `<` too, so the only
unambiguous form changes what happens to malformed markup. It is now a scan in
common/stripHtmlTags.ts, quirks included — `<>` is left alone, `<a<b>` is one
tag — with the equivalence pinned by a test that compares against the old regex
over every string up to length six.
**And roughly 500 places could only be reached with a mouse.** Clickable divs
became real buttons where the markup allowed (52 of them), took
role + tabIndex + Enter/Space where they had to stay divs, and modal backdrops
took role="presentation" — the honest role, since a backdrop is a mouse shortcut
for a Cancel control that is already in the tab order, and making it a button
plants a nameless full-screen tab stop around its own contents.
Alongside those: `.sort()` calls that now say the order they always had, `{n &&
<X/>}` guards that rendered a literal "0" for a zero-byte file and for a place at
latitude 0, an optimistic budget write that stored a boolean where the contract
and both transports use 0/1, and the Number statics.
sonar-project.properties documents the six that were deliberately left: two wiki
patterns with no overlapping quantifier pair whose "fix" would stop parsing
`[see [1]](url)`, four tar header fields bounded at 12-155 bytes by the format,
two djb2 hashes where the 32-bit wrap is the algorithm, two `| 0` that are also
coercing undefined to 0 on a path where the API sends no user_id, and the MCP
session maps Sonar reads as empty because they are filled from another module.
Sonar's S2871 flags a bare .sort(), which orders by UTF-16 code unit rather than
by value. All 30 remaining sites turned out to sort ASCII strings — ISO dates,
currency and country codes, setting keys, route names, OAuth scopes, zip entry
names — where that order is already the intended one. Each says so explicitly
now, with a comparator that reproduces it exactly rather than a localeCompare
that would quietly reorder things.
That mattered more than it sounds. Several of these feed something other than a
display: useAtlas joins the sorted codes into the signature that decides whether
to rebuild the region layer, daysSlice re-pins sorted dates positionally onto
reordered days, and three timeline views pick a day's colour by indexOf into the
sorted array. Switching any of them to a locale collator would have been a silent
regression.
Two smaller ones came with it. The .map(placeBtn) calls in FileManagerAssignModal
pass the index as a second argument, which placeBtn declares and uses for its
React key — correct already, now written out as .map((p, i) => placeBtn(p, i)).
And budgetSlice's optimistic paid-toggle stored the raw boolean behind
`paid as unknown as number`, while the schema declares z.number() and both the
REST response and the WebSocket event carry 0/1. So the optimistic state and the
confirmed state disagreed on type until a refresh. It normalises now, and the two
tests that asserted `true` assert the contract.
Four `| 0` truncations are listed in sonar-project.properties instead of changed.
Two are a djb2 string hash where the 32-bit wrap is the algorithm. The other two
look like plain truncation of a row id, but `| 0` is also coercing undefined to
0 there — the settlement flows the API returns carry no user_id, so that is the
normal path, and Math.trunc returns NaN and crashes the lookup.
Adds a version picker to the plugin admin panel, on desktop and mobile: every
published version with its own server-computed compatibility verdict, so the
client never re-derives semver range logic.
A deliberate non-latest pick sets an update hold on the row, which keeps the
update banner and "Update all" from immediately nagging the rollback away. The
hold releases when an install lands back on the newest compatible version by any
path, or when the admin resumes updates explicitly. An unresolvable registry
never sets one: refusing to pin on missing information beats silently muting
future updates.
With a day selected, the 'planned' filter now shows only that day's stops,
matching how the other filters follow the selection; with no day selected
it keeps showing the whole plan. 'unplanned' still uses the whole-trip
assigned set. Discussed in #2024.
* fix(security): mint idempotency keys properly, and resolve the extractor by path
Three findings out of a sweep of every open Sonar security issue. The other 49
turned out to be false positives and are documented in sonar-project.properties
rather than changed — each entry scoped to a file, never a whole rule, so a
future Math.random() on an auth path still fails.
The idempotency key is the one that can lose data. Both producers fell back to
Math.random when crypto.randomUUID was missing, and randomUUID needs a secure
context — TREK's own quickstart is http://localhost:3000 and LAN installs run on
http://192.168.x.x, so on the deployments the README documents the fallback is
what actually runs. The axios one was
`Math.random().toString(36).slice(2)`, which is not length-stable: 0.5 yields a
single character and 0 yields the empty string, which the interceptor reads as
"no key" and skips deduplication for entirely. Two writes sharing a key collapse
into one — the second gets the first one's cached response and the edit is gone
with no error anywhere. Both now come from utils/randomId, which has the
getRandomValues rung that works in insecure contexts too.
The extractor probe stored the bare binary name, so every extraction re-resolved
it through whatever PATH held at that moment. The official image sets
KITINERARY_EXTRACTOR_PATH and never reaches that branch, but a bare-metal install
without it ran an unqualified name from a PATH it does not control. It now walks
the search path itself and keeps the absolute path of the file it verified;
execFileSync also drops the /bin/sh hop the old probe needed. PATH comes through
app-config because process.env is walled off in src/.
* fix: four tests and sorts that were not doing what they claimed
Sonar reported 43 high-impact reliability issues. Reading all of them, four are
real; the rest are cosmetic or would be made worse by the suggested change.
budget.test.ts hand-built `paid: true`, but both emitters send `paid: body.paid
? 1 : 0` and the handler stores the value verbatim — the test asserted a payload
the server never sends. The line below it already used a number.
admin.controller.test.ts had a `.resolves` assertion with no await. The promise
was dropped, so that line could not fail the test.
The two to-do category lists sorted with a bare .sort(), which is byte order:
every accented name files behind the whole ASCII range, so in a German trip
"Übernachtung" lands after "Zelt". TREK ships 23 locales, so this is real data.
One side effect worth knowing: katColor picks a category's dot colour by its
index, so re-sorting can move which category shows which colour — it already
moves whenever a category is added, and the colour carries no meaning.
Deliberately not changed: the two `| 0` truncations (Math.trunc is not
equivalent — `| 0` wraps at 32 bits and these carry millisecond timestamps), the
two .map() callbacks whose second parameter is declared and used, and the sha1
in thumbnail.service (its own comment says a swap would orphan every existing
thumbnail).
* refactor: give every button a type, and prefer the Number statics
Two mechanical sweeps, no behaviour change intended in either.
A <button> with no type attribute is type="submit" per the HTML spec. Outside a
form that does nothing today, but it turns into a surprise the moment the markup
is wrapped in one, which is what Sonar's S9011 is warning about. 870 buttons get
an explicit type="button". Two things were left alone on purpose: buttons that
take a {...spread}, because the spread may carry a type and the merge order
decides which wins, and anything inside a <form> — there the answer is a
judgement call, and checking all eleven form files found every real submit button
already carrying type="submit".
The Number sweep covers only the three globals that are exactly equivalent to
their Number twin: parseInt, parseFloat and NaN. isNaN is NOT in it — the global
coerces its argument, so isNaN('abc') is true where Number.isNaN('abc') is false,
and renaming it would change what the code does. It reaches server and plugin-sdk
as well as the client; both copies of egress-policy.ts got the identical edit, so
the mirror the SDK's parity test guards stays intact.
SonarQube's S2699 flagged 196 test cases as assertion-less. Almost all of
them end on a bare `await screen.findByText(...)`, which does throw when the
text never shows up — the test is real, the analyser just cannot see it.
Spelling the check out keeps the behaviour identical and makes it readable.
Writing them out turned three tests red, each for a good reason:
- FE-COMP-NOTES-008 read the heading out of the loading panel, which renders
its own copy and swaps the whole node out once the fetch settles. It now
waits for the loaded state.
- FE-COMP-PHOTOPROVIDERS-014 matched /connected/i, which also matches the
"Not connected" the badge starts as — the test passed whether or not the
button did anything. Exact text now.
- FE-FILES-002 compared an empty list against the empty list it already was.
It seeds a file first, so the 500 has something to leave alone.
JOURNEY-SVC-066 asserted nothing at all behind a "should not throw" comment;
it now says that out loud and checks no journey entry is left orphaned.
Closes#2019
The route toggle belongs to one day; the reservation list it filtered is the
whole trip. So turning on a day's routing let every transit reservation in the
trip draw its geometry at once, including the ones belonging to other days —
on a day that has no transport of its own, which is what the reporter saw.
Only automated transports rode it, and that is the distinction they drew: a
manually entered train or flight is type 'train'/'flight' and reaches the map
only through its own per-booking toggle. Only the transit search stores
type 'transit'.
Gate the transit branch on the day, and gate only that one — the per-booking
toggle stays trip-wide, because switching a booking's route on is a deliberate
act about that booking. The predicate is the day-order range, not the departure
day: an overnight journey carries end_day_id and has to stay on both of its
days, the same rule the sidebar timeline already applies. Day order rather than
day id, since ids stop being monotonic once days are reordered.
The day context is optional throughout, so a map without one — collections —
keeps behaving exactly as it did. Not a 4.0.0 regression: it reproduces on
3.4.1 too.
Closes#2021
A country is one path but not one landmass. France's is five rings, three of
them Kerguelen, French Guiana and New Caledonia, so fitting a map to its
bounding box asked for 221 degrees of longitude and printed a Paris-Lyon-Nice
route as a single dot. Britain does it through South Georgia, Norway through
Svalbard, Ecuador through the Galapagos — which is why a Netherlands journey
looks perfect and a France one does not.
Satellite only escaped by accident: imagery leaves the shape list empty, so the
fit fell through to the stops. Same control, silently doing nothing.
Fit to the rings the journey is actually near, and keep the whole shape as the
fallback for a map with no route yet. The margin is the route's own size with a
two-degree floor, which is the judgement in this fix: at two degrees a
Paris-Nice route still keeps Corsica, which is the picture that trip wants,
while Kerguelen stays out.
The outlines themselves are untouched — the overseas rings are still drawn,
they just run off the frame the way a coastline does.
Closes#2022
The story preview carried both `block` and `line-clamp-2`. Tailwind emits the
display plugin after line-clamp, same specificity, so `display:block` won and
`-webkit-line-clamp` — which only does anything on a -webkit-box — was inert.
The whole entry text rendered, the card grew with it, and the timeline it sits
in is bottom-anchored with no height of its own, so it climbed up the screen.
Measured at 430x932: three words put its top edge at y=744, four hundred words
at y=24, two thousand at y=-2916. That is the reporter's "at the top in one
journey, in the middle in another" — it is not the install, it is the longest
comment in the journey being opened.
The same growth explains the other half. The timeline sits above the map and is
a horizontal scroller, so once it covers the screen it takes every drag Leaflet
would have got, and only the gap between it and the dock still reaches the map.
Dropping the display utility fixes today's cards; capping the card height means
no future one can do this again. 140px is what the older journey timeline pins
its active card to, so the two look like the same product.
Also lift the map attribution over the dock, which the reporter's screenshots
show sitting on top of it. Both engines, since a phone meets either.
safeExternalHref prefixed https:// to anything without a scheme, which turns
a note that reads "call the hotel" into a link to a host that does not exist.
A dot and no whitespace is what separates www.hotel.com from free text.
The rollbacks this branch added were snapshot-shaped: capture the whole
collection before the write, restore it on any failure. That is wrong in two
ways at once. It undoes work the server already accepted when a later step is
the one that fails, and it throws away whatever a collaborator's socket event
applied while the requests were in flight.
The day-plan reorder is the clearest case: five awaits, and a failing day-note
write reverted transport positions the server had already stored. It now
records only the fields it is about to overwrite, per booking, and drops each
one as its request lands - so a note failure reaches the catch with nothing to
undo, and a booking that arrived mid-write survives.
The notification toggle had the same shape underneath: the rollback was made
surgical but the request still shipped the whole matrix built from the
pre-toggle render, so two overlapping toggles overwrote each other anyway. It
sends the one cell that changed. The test pinned the disagreement as correct;
it asserts the payload now.
Photo reorder awaits allSettled rather than all, so the UI is not snapped back
while the remaining writes are still landing - a partial run really does leave
the server holding part of the new order, and only a total refusal justifies
restoring the old one. Both the desktop editor and the mobile sheet, which was
still swallowing every rejection.
Also: the geolocation start guard is a run generation now, because a start
issued after a stop re-sets a plain flag while the first run is still parked in
the iOS permission prompt; a category rename reports once for the batch and
rethrows, so the settings dialog stops closing as if it had worked; and a 404'd
import job stops telling the user their file was invalid when it had simply
expired.
The clipboard fallback for plain-HTTP installs was pasted into three files by
this branch. It is one helper now, and the two copy buttons in the members
modal that still called navigator.clipboard unguarded use it too. Same for the
fourth local-date helper written next to the three that already import the
existing one.
Four of the fixes already on this branch were wrong, and an adversarial read
of the diff is what turned them up.
The shared merge helper claimed to implement the server's
COALESCE(assignment_time, place_time) and did not: it pinned the embedded
times to whatever the assignment already showed, ignoring the override
column entirely. Sharing that with the WS applier traded one bug for
another - a collaborator moving a place from 08:00 to 10:00 stopped reaching
the day card for every assignment WITHOUT an override, which is most of them.
It merges the way the server projects now, and the test that was supposed to
pin this seeded a fixture the server could never produce (embedded times that
differ from the pool row with no override to explain the difference).
The per-iteration auth gate went into every loop in tripSyncManager except
the one that matters most: the mutation-queue replay, which writes server
responses straight into Dexie. After a logout that is the shared anonymous
database. The fire-and-forget tags/categories writes two lines below a gate
added in the same commit were ungated for the same reason - they resolve
later, and the check has to happen then.
safeHttpUrl is backed by placeWebsiteSchema: http(s) only, capped at 500
characters. A booking url is deliberately free-form - shared's own contract
says so in as many words, because people paste bare hosts and long provider
deep links - so guarding it with the stricter schema turned a link somebody
saved last year into dead text. safeExternalHref refuses the schemes that
execute in this origin and gives a scheme-less value https://, which is what
an address bar does with the same input.
And the memories timeout was 20s while the server's own budget for a Synology
call is 30s, doubled again when the session has expired and it re-authenticates:
a slow NAS that answered before this branch would have started reading as
disconnected. Those calls had no client timeout at all before; they have none
again, and the ones that need to give up early carry an AbortSignal.
The notes thumbnail also loses its NUL byte cache separator - it made git treat
the whole file as binary, so a security fix landed in it unreviewable - and
gains the same cache cap its chat sibling got.
Several of the fixes in this branch landed on a mobile screen while the
desktop component with the identical bug sat in another package and was left
alone, which leaves the two disagreeing about the same handler.
So: the appearance tab flushes its debounced write on unmount, the journey
share copy guards navigator.clipboard (undefined on a plain-HTTP self-hosted
install), the admin collab toggle rolls back from a scoped snapshot instead
of a stale one, the reservation modal parses metadata through the guarded
helper rather than a bare JSON.parse that takes the route down, and the
notification toggle surfaces its failures and stops racing concurrent
toggles.
The Journey components reached the memories provider-status endpoint with a
raw fetch(), past every apiClient interceptor; they go through a small
memoriesApi now. And the server half of the OSM menu_url finding: the client
renders it through safeHttpUrl, so place-enrichment should not be handing a
javascript: value out in the first place.
The share section hides itself when the server says the link is not this
user's to manage, rather than offering a create button that 403s.
Three surfaces still had English written straight into JSX in a codebase that
gates on key parity: the reworked expense modal, the Studio quickbar and
rotation handles, and the leg-mode menu on the mobile day plan. Keyed, and
translated into all 23 locales rather than pasted.
Also reworded the plugin geolocation permission: it told the user their
browser would ask, and it never does - TREK answers the plugin from the
page's own location permission.
Left out of the commits they belong to by hand, not by intent: the mobile
screen suites, the tripRepo cache-first read behind the startup-destination
fix, and the MSW handlers the stricter unhandled-request setting needs.
The SDK's parity suite had an unescaped apostrophe in an it() title, so the
file did not parse and vitest reported it as "no tests". Both guards in it
were dead - including the byte-identical egress-policy check the package's own
notes call the worst possible bug in that module to lose. No CI job runs the
SDK suite, so it landed quietly; the next npm publish would have failed on it,
since prepublishOnly runs the tests.
Also in the SDK: the dev preview answered trek:geolocation without checking
the geolocation:read grant, so a plugin whose manifest is missing the
permission works perfectly in dev and is dead once installed. That is the
lenient direction, which is the one that ships broken plugins.
Client side: the background-task poll never dismissed a 404'd import job and
spun forever, "Update All" collapsed its busy flag after the first plugin
settled, the lightbox had no cancellation so a slow signed URL rendered the
wrong image, the plugin geolocation watch was torn down by any unrelated
settings write, manual date entry accepted 31 February, cover previews were
never revoked, and check-all issued one request per packing item.
Four screens derived "today" from toISOString(), which is the UTC calendar
day: an expense filed at 17:00 in Los Angeles was dated tomorrow, a to-do went
overdue eight hours early in Tokyo, and a new journal entry got the wrong day
either side of midnight. All four take the viewer's own calendar day now,
through the helper the planner already had.
Three sheets built preview object URLs in render and never revoked them, so
scrolling a picker leaked one blob per pass. Photo reorder fired its PATCHes
from inside a setState updater, which StrictMode double-invokes.
And several writes failed in silence: the notification toggle, the collab
feature switch rolling back to a stale snapshot, the appearance change whose
debounced write was dropped on unmount so it reverted on the next reload. The
backup-code print page skipped the escaping its desktop twin does, the
clipboard copy threw on a non-HTTPS install, and reservation metadata was
JSON.parsed unguarded in render, which takes the whole route down.
After a save conflict, Keep mine set the version and unblocked writes but
never re-queued the local document, and write() had already cleared the
queue before the request. So if the user picked Keep mine and then simply
closed the editor without typing anything else, saveNow() found nothing
pending and did nothing: their afternoon of edits existed only in memory,
the indicator said idle, and the server kept the other version. The exact
outcome the conflict dialog promises to prevent.
Ctrl+Z was intercepted while typing in a text field too. Studio commits text
on blur, so mid-edit the typing is not in the undo history yet: the browser's
own text undo was suppressed and a previous layout change was undone
underneath the open editor instead. Reads as random data loss.
Also: delete no longer removes locked elements, the auto-layout no longer
freezes an empty GPS path when tracks resolve after the one-shot build, the
back-cover tally cannot print "0 places", the map fetch aborts when Studio
closes, and a double Enter in the list-name field stops creating two lists.
The page-pattern gate had quietly stopped covering anything: the Desktop-shim
refactor moved every real container out of the default export the checker
reads, and its regex missed useRef<T>(null) anyway. Widened on both counts,
and the state it immediately found moved into the hooks.
The notes and polls WebSocket handlers applied every event they saw without
checking which trip it belonged to, so an event for another trip the user is
a member of landed in the open one. The poll load effect had no cancellation
either, so switching trips fast let the old response win.
What's Next compared trip-local calendar dates against a UTC one while
building the time from the local clock. West of UTC that means the rest of
today disappears from the widget every evening and tomorrow's items are
labelled Today; east of UTC it happens after local midnight instead.
A note website was rendered as a raw href with no scheme check, the same
stored-javascript: shape the planner had. Category rename walked the notes in
a loop with no handling for a partial failure. And the school-holiday region
labels resolved German first for every locale.
A booking's url is rendered as a plain href to every other member of the trip
and nothing ever checked its scheme, so a collaborator could store
javascript: there. The place website next to it has been going through
safeHttpUrl for exactly this reason, with a comment saying stored values
predate the server check - this is the surface that was left. Both ends now:
safeHttpUrl at the render site, and the scheme in the shared contract so
nothing new gets stored, additively so existing rows still load.
The per-leg routing rewrite turned one multi-waypoint request per run into
one serial request per leg. A twelve-stop day is eleven round trips to a
public OSRM in sequence before a single connector appears, and toggling km/mi
does it all again. Group consecutive legs that resolve to the same mode into
one request and fire the groups concurrently, keeping leg order on the join.
Transport reordering wrote to the store and persisted with a bare catch, so
a failed PUT left the sidebar showing an order the server never got; it
reconciles now. Plus the smaller ones: the OSM menu_url rendered unchecked,
expand/collapse-all persisting to a different storage than the day list reads,
the debounced address search with no ordering guard, the accommodation save
chain with no error path, and window.__trek_map holding a destroyed map.
Maurice