reportGlViewport says what a GL map shows, its bounds and its zoom on the
raster tile scale, and has its own test for that scale. MapViewGL only
wires it to moveend and idle, and its test checks that wiring. The GL map
tests put the zoom back to its default before each test, as they do for
every other value a test overrides, instead of each test restoring it.
The pistes overlay has no tiles below zoom 9, so switching it on at a region
or country view left the map empty while the switch looked on, which read as
broken. Both maps now report their zoom with the viewport, on the 256 px tile
scale raster sources count in (a GL map's own zoom is one step lower there),
and the planner hands it to its overlays. While the pistes are on and the map
is further out than their first tiles, the switch stays pressed in the soft
accent, its tooltip and the key's first line say to zoom in, and the screen
reader hears it once. An unknown zoom claims nothing.
While a hike is planned, the planner's map switch offers "Hiking" beside the
map, topo and satellite: OpenHikingMap, with marked trails over the terrain.
It is a choice of the planner's view alone, like topo: the global map
setting, the tour and its days stay as they are. With no tour open, over an
import viewed as it came in and for a paddle tour it is not offered, and a
choice made earlier falls back to the standard map there.
openmaps.fr's tile usage policy is followed: tiles load only as the map
shows them, with the browser's Referer, from the server's own caching; no
service worker rule keeps them and the 3D flyover's warm-up passes their
source by. Its credit and donation link are on the map; the 3D map, whose
attribution is folded away under the panel, shows them as a line of its own
above its controls.
The service is best effort. A run of failed tiles while it is shown marks
the switch, with a tooltip and a status for screen readers that say it is
not answering and that the tour is untouched; one tile arriving clears it.
The tile health the seamark overlay had is now useTileHealth, shared by both.
The source is free for non-commercial installs up to 500,000 tiles a month.
tours_hiking_map_enabled is an admin switch under Tours (admin tours-hiking-map,
audited), on by default, for an install that is commercial or larger to
switch off until it has an agreement with the operator. /api/addons carries
it as toursHikingMap, true only while Tours is on.
Leaflet, GL and the 3D map read one table of the planner's raster bases
(tourRasterBases), so topo and the hiking map are drawn the same way.
tile.openmaps.fr is on the CSP's connect-src for the GL maps.
PAD-05B: a click on an obstacle on the map or on the route band opens its card in the look of the via ferrata card: the kind with its glyph, the name, how it stands to the route (on it at a distance along it, near it with the link marked unclear, or only in the area), the paddling rule its tags give with canoe read before boat, a condition as written, height, grade, hours and fees, the source with the date of the data and the OpenStreetMap link. A missing rule reads as unknown, never as allowed, and a portage way recorded as private says so. Objects only in the area show from zoom 13 on, on Leaflet and GL alike; on GL the lines only near the route are dashed as on Leaflet, one click handler picks the marker over the line, and a picked marker no longer flickers. The route band marks the obstacles on and near the route by their share of the measured line. The obstacle notice also names an answer cut at its limit.
PAD-05A: the admin area gets a Paddle water data card under the addons, on desktop and phone: a search in Geofabrik's list with each region's path, the regions with their state (waiting, reading with its progress, ready with objects and data date, failed with the reason), reading again and removing after a confirmation. The list follows a read without reloading. Region changes write audit rows.
Map colours of paddle objects and portages come from theme tokens read at draw time, as the via ferratas do; the ferrata layer now shares that reader. The rail takes the planner page's parts as one bag, the map hit tests of the tour layers are one helper, and the unused noWaterData string is gone from every locale.
PAD-03 portages and locks on planned tours and recorded tracks, PAD-07 paddle time with portage and lock stops, PAD-08 wind forecast for the start, PAD-05A regional obstacle import from Geofabrik extracts with admin endpoints and a monthly refresh, PAD-05B first cut of the obstacle layer on Leaflet, GL and 3D. Work in progress: checklist (PAD-06), check bench (PAD-09), admin UI, translations and tests follow.
- Paddle as a plannable tour type: one boat (kayak, canoe, SUP, other), river or
lake, a pace that a boat change never overwrites; time is distance over pace
- Hand-drawn legs beside routed ones, drawn dotted and labelled as not routed,
kept through save, reopen and edits elsewhere
- Reverse a tour and close it back to its start, each one undo step
- GPX import shows a preview first (line, measures, duplicates, type) and only
the confirmation stores the tour
- Base maps and overlays per tour type in the planner: hike keeps topo and the
via ferrata layer, paddle gets the OpenSeaMap seamark overlay
- P2C-02: tours record their origin (planned, GPX with file name, wanderer)
instead of reading it off their shape; the detail answers a provenance
contract and a trip copy keeps a tour's import record
- MF-03: a wanderer snapshot's source can be checked on purpose, read only,
with a confirmed reimport as a new snapshot
- PR1-18: every way of putting a tour on a day shares one set of rules
- PR1-07/08: each person can hide tours from the trip map; the list shows
each tour's line colour and the picked tour stands out on both maps
The tours map gets a 3D mode on the same map surface between the side panels:
a "3D" switch in the layer pill drapes the route over open Terrarium elevation
tiles (AWS Open Data), colours it by grade, plays a flyover tied to the
elevation profile in the rail, and keeps planning working by clicking and
dragging waypoints on the terrain. The corridor around the route is preloaded
before the flyover so the landscape never loads in front of the camera.
GPX imports no longer get a made-up hiking difficulty: max_hiking_difficulty
becomes nullable (new migration, waypoints kept), the import writes null and
the client shows no T badge for it. Drawn tours still default to T2.
Info hints in the planner show their tooltip only, and the discard
confirmation reads "Discard changes".
This commit completes the reviewed Tours follow-up scope after the Tours MVP was merged into dev.
Included feature blocks:
- RC-01: identify Tours in PLAN day rows and show compact Tour facts;
- RC-06: search for a city or address in TOUR-PLANNER without hidden writes;
- RC-07: reorder Tour waypoints in the left sidebar;
- RC-08: drag Tour waypoints on Leaflet, MapLibre and Mapbox with stable viewport, history and routing behavior;
- RS-01: persist Tour descriptions and HTTPS information links with local provider classification;
- RS-02: persist breaks/additional time and calculated or manually adjusted planned Tour duration without changing scheduling semantics.
The implementation preserves:
- ordinary Place and Legacy Track behavior;
- Tours-off fallback behavior;
- existing GPX/import behavior;
- Tour assignment and deletion behavior;
- calculated routing duration as a separate value;
- existing Tour provenance fields;
- keyboard/list alternatives for waypoint editing.
Not included:
- PR1-09 trip-wide Tour summary;
- Wanderer integration;
- GPX import changes;
- new Tour types;
- Tour-to-Day drag-and-drop;
- further roadmap or Post-Release features.
Validation:
- focused RC-01/RC-06/RC-07/RC-08/RS-01/RS-02 tests passed;
- affected shared/server/client typechecks passed;
- migration and generated DB type checks passed;
- scoped ESLint passed;
- staged diff checks passed;
- owner manual tests passed for all six feature blocks.
MapViewAuto took props: any and the Leaflet MapView destructured any, so a prop
one renderer learned and the other never heard of went unnoticed.
components/Map/mapViewContract.ts holds MapViewProps, derived from the GL
renderer's props and what the callers pass; MapView and the GL bindings in
glLazy declare satisfies ComponentType against it, and the GL renderer extends
it with its engine. The file imports types only, so check:gl-split is not
affected. Types only, no runtime change.
The types show two known gaps, recorded in the contract rather than papered
over: onMapReady is called by the GL renderer only, and callers pass pins
without trip_id (assignment and collection places) while both renderers type
their pins as Place; MapViewAuto bridges the latter with one commented cast.
MapView and MapViewGL each held the same photo loading effect: read the
cached thumbs, fetch the missing ones, listen for their arrival and batch
them into one animation frame. It now lives in useMarkerThumbs, which
also owns the thumb state and the place photos switch, and both maps
call it where the effect used to be.
The effect keeps its keys (the picture sources and the switch). It reads
the places through useEffectEvent, which drops the old
exhaustive-deps suppression in MapViewGL and the warning in MapView.
The phone shell was chosen by width alone, and most phones are wider than
767px in landscape, so turning one swapped the whole route tree for the
desktop planner and an open sheet, its input and the map position were
lost. The phone query now also covers a touch screen under 500px tall,
which no tablet is. It lives in one place: the shell, the planner and todo
hooks, the warnings banner, dialog focus and the stylesheets read it, and
six components that measured the window once on mount now follow it.
Small requests from the discussions, each built end to end: planner and
map (cycling mode, date first headings, clear a day, stay times per day,
off-route stops, map lock, compact unplanned markers, pending stays,
cable car, transit quick picks), places (location filter, category from
OSM, open in maps, geo: link, image from an attachment, enrichment on
file import, places near a pin, place name language, Amap first in
China), lists and costs (packed counter, inherited sharing, Markdown
to-dos, payment notes, bookings CSV, my plan PDF), sharing (unplanned
places, travel only, without photos), journey (photo zoom, drafts,
photo order, trip suggestion, day jump), atlas (region counter, region
bucket list, places per country), vacay half company holidays, studio
copy and paste plus the book's own layouts, and RESTORE_FROM_BACKUP for
a first start restore.
The Plan tab was the last trip tab still in the old design. It now reads
like Bookings, Costs, Lists, Files and Collab, without losing a function:
- Day plan: each day is a card with a head band (day tile with weather,
stay and rental pills, a "+" menu for place, stay, transport, transit
and note), rows with "..." menus, white badges and a white route bar.
- Places column: add, search and filters in three rows, a show dropdown,
category and rating filters, and a selection bar at the foot.
- Place inspector, day details and the stay editor on the shared dialog
frame; the place form in the editor look with the name in the head band.
- Clicking a booking or transport anywhere on the plan opens the booking
detail popup first; Edit leads to the editor. The popup is one host
shared with the Bookings and Transports tabs.
- Files and Collab dialogs, notes, polls, links and chat moved to the same
frame; shared DialogShell and dialogParts hold the building blocks.
- The map hover card shows the place photo and follows the theme.
Every new and reworded string is translated into all locales, and a few
older English leftovers (help center, cost split, import hints) with them.
Phone screens keep their own look.
A new manifest capability poiCategories (up to 4, icon from an allow-list,
strict #rrggbb color) and the hook poiCategoryProvider.getPois behind the
hook:poi-category-provider permission. GET /api/plugin-pois in the plugin
contributions module answers them in the /api/maps/pois shape, with
search_plugin_pois as the MCP twin. plugin: ids no longer count as Google
place ids. SDK 1.8.0 carries the types, validation and docs.
On the map, one hook merges the built-in categories with the ones active
plugins declare, and the pill shows the plugin chips after a divider on
desktop and phone, scrolling sideways instead of shrinking a chip below
its touch target. A plugin chip searches through a repo that refuses
offline and parses the answer strictly. Its pins, on Leaflet and GL, use
the category's own icon and color, both checked again before they reach
any markup, and the hover card lists the plugin's details as escaped
text. A plugin POI can be added as a place like any other. The admin
panels on desktop and phone show a chip for the new permission and the
categories a plugin would add, from one shared module.
Addresses discussion #1781.
With the Unplanned filter on, a click on a stop in the day list moved the
map while a click on the stay chip did nothing: the map only went to a
selected place it showed as a pin, and the GL map also to one of the open
day's stops, which a stay is neither. Both renderers now look the target
up the same way, the pin first, then the day's stop, then the selected
place itself, so the map goes to the stay whatever filter hides its pin.
A booking switched on with "On map" stayed drawn on every day of the
phone's plan map, so a flight from the first day crossed the map of the
third, although a day chip frames one day and drops the other days' pins.
The plan map now draws such a booking only on the days it runs on, the
arrival day of an overnight one included, and the all-days view still
shows every booking that is switched on. The switch itself stays
trip-wide, and the desktop, collections and the road trip stage draw
exactly as before.
"On map" in a booking's sheet now reads as on only where the plan map
draws the route. From any other day a tap takes the map to the booking's
day, switching the route on when it is off, instead of hiding a route
that is not drawn there anyway.
The phone settings also gain the "Always show booking routes" switch the
desktop already had. As on the desktop it sets the default for trips not
yet touched on this device, so a trip where a route was switched on or
off by hand keeps that choice.
Both renderers read window.innerWidth once while rendering, so the button
that turns GPS on was decided by the width the map happened to see when it
mounted: a phone turned sideways crosses the 768px cut and kept whatever it
had, and turning back did not bring it home either. Both now use the same
useIsPhone the shell switches on. The test stub for matchMedia answers width
queries from window.innerWidth and re-evaluates on a resize, so a breakpoint
can be driven from a test the way the browser drives it.
Every file the release touches was read once more, and what survived an
independent check against the code is fixed here, with a test for each.
Data and credentials
- A document sync connection edited to a new address no longer carries the
stored token along: a blank form under another origin is refused, the same
rule the probe route already had. Dawarich and AirTrail testConnection send
the stored key only to the host it was stored for.
- The key rotation script now covers document_connections.secrets and
trip_document_links.webhook_secret, which it had skipped.
- Turning a booked night into a pause in the road trip popup asks first and
says that the booking and its expense go with it. Deleting a place says the
same when a night is booked there, on the desktop and on the phone.
- A moved version marker over unchanged bytes no longer replaces the TREK file
and its attachments; a real revision carries the attachments over.
Planner
- A drop in the day plan names the row it lands ahead of in the full day, so a
hidden hotel stop no longer shifts it one slot early; the store sorts before
it splices. Via re-anchoring, the booked-night guard and the sidebar's day
membership read the stored day, the index space the server uses.
- A hotel stop placed mid-day re-pins the road trip vias of that day, and the
booking session receives the new stop order too. The Public API and the iCal
feed list a booked hotel once. A plugin can no longer write a stay against
another trip's day.
Road trip and map
- The route overview paces its requests to the public routers and retries a
rate limit, and it says which legs it could not route instead of quietly
reporting a shorter trip. A click on a via handle no longer drops a second
via; handles hide when zooming out. Read-only members cannot edit the driving
limits. The phone shows a way back when no day is picked and prints the night
drive departure in the chosen clock format.
Integrations and search
- Google transit keeps conventional trains when the train chip is on.
TREK_PLACES_ENABLED=false stops the details and enrichment calls too, and
accepts the whole boolean family. A caller-supplied description no longer
lands in the instance-wide enrichment cache. Nominatim searches carry a
timeout. An OSM place id is checked for shape before it reaches Overpass.
- Dawarich puts a stay on the trip whose dates hold it, the Atlas hand-off
knows what the Atlas already shows, and a host change with a new key clears
the old instance's state.
- Document sync: a webhook address pasted by hand works on the token alone,
deleting a connection unregisters its subscriptions, Nextcloud under a
sub-path connects, Synology answers a name collision before uploading and
verifies a move into the bin, Paperless titles are capped at 128 characters,
a DNS failure reads as unreachable rather than as a policy verdict, videos
from the store are accepted like uploads, and remote_missing has a way out.
Conflict buttons only for the owner, a refused choice is reported, a refused
credential gets a Reconnect button, disconnecting asks first on the desktop
as it does on the phone, and the folder picker no longer spins forever.
Release
- The server holds the release notice back from a bundle that cannot draw it,
so the previous shell served from the service worker cache after an update
no longer shows bare keys and no longer lets a click use the notice up.
- Import into an existing list gets the same body limit as a new list. Chat
images say when the limit is reached and the new controls are translated.
The transit backend switch reports a failed save. The Helm chart carries the
Amap credentials in its Secret; the shipped templates document the Places
API and Amap variables and the Overpass default. The wiki follows.
A trip that models one building as several stops — drop the bags, check in,
the museum inside the hotel — drew every pin on the same pixel, and only the
top one could be clicked, hovered or seen. Clustering is the mechanism for
exactly that: the plugin keeps children no zoom level can separate in one
cluster and fans them apart on click. disableClusteringAtZoom pinned the
group's own maximum zoom to 8, which both removed every cluster above it and
moved the only fan trigger into a zoom band a trip planner never operates in,
so the spiderfyOnMaxZoom set beside it could never fire.
The cutoff is gone. maxClusterRadius is a function of zoom instead: the same
generous radius as before in the overview, a pin's width above it, so stops
that are genuinely apart keep their own pins and a pile becomes a counted
bubble that fans open. Selecting a buried stop from the places rail now opens
the bubble it is hiding in rather than doing nothing visible, and it does that
without moving the camera, which stays the selection's own concern.
The GL renderer has no fan to open, so folding a pin there removes the only
thing that was left rather than providing a way in. It folds at a far tighter
radius — genuine coincidence, where nothing was reachable to begin with — and
draws the selected member of a pile, so the rail reaches it there too. A map
object without a projector now skips folding instead of dropping every marker.
The public share page spreads the same options and has no rail to fall back
on, which made it the worse case; it is fixed by the same change.
Closes#2344
A place with an uploaded image showed a plain disc of its category
colour on the map, while a picked suggestion looked fine. The marker
sized its img with width and height attributes, and stylesheet rules
beat those: Tailwind's preflight gives every img height: auto, and
Leaflet's marker pane adds width: auto. Suggested and auto photos reach
the marker as 48px square thumbs, so nothing showed. A phone photo kept
its own proportions on the GL map, a sliver inside the circle, and its
full pixel size on Leaflet, where only the rounded-off corner of a
4000px image lands inside the circle. Both maps now build the img
through one helper that sizes it in its style, so object-fit: cover
crops any photo to the circle.
The thumb loading on both maps was keyed on place ids, so a change of
picture under the same place went unnoticed until a reload:
- Taking an upload off a place left the category dot instead of
bringing its auto photo back.
- Picking another suggested photo kept the thumb of the first one,
which was cached under the provider id. A picked photo is now its own
cache key.
**A saved stay left an invisible sheet standing, and the day swipe stayed dead behind it.**
The stay sheet reopened 'rtstop' by spreading its own payload, which carries a place id.
That sheet is located by day and assignment, so it resolved to nothing and drew nothing,
while `shell.sheet` still pointed at it and `menuOpen: !!shell.sheet` kept the day swipe
blocked until something else closed it. The row rides along now, both ways, and with no row
to go back to the sheet closes rather than opening one that resolves to nothing.
**"End the day here" showed off for a day that already ends there, and switching it on
deleted that day end.** Two things close a day: the stop's own flag and a manual boundary
filed against it. The writer has always known about both; the phone switch read only the
flag, so the tap ran through the writer's boundary branch and cleared the boundary. The
question is asked once now, in the planner beside that writer, and the desktop reads the
same answer it always computed inline.
**The road trip chain printed 24-hour clocks at a reader on a twelve-hour one.** The model
hands clocks over as HH:MM, which is what the schedule computes in, and the chain, the head
card and the up-next card printed it straight. The desktop rail, the day timeline and this
tab's own sheets all honour the setting; these go through the same formatter, carried in the
row chrome so no two rows can disagree.
**The up-next card's navigate button read "places.navigate".** No locale has that key. It is
`inspector.navigation`, which is what the stop sheet beside it, the place inspector and the
place sheet all use, with the single-target label when there is only one.
**Offered roads were invisible on a satellite basemap.** The imagery is anchored under the
first layer TREK draws, found by prefix, and the roads offered for a leg are added before
the route source so they sit under the current route. That also puts them before the first
`trip-` layer, so the raster went straight over them. The prefix list knows them now.
**A journal grew a day section for every day Dawarich recorded, all year.** The hook reads
every open stay the account has, and the timeline took all of their dates. A week in May
therefore sprouted sections from September. Bounded by the journal's own span now, its
entries together with the dates of the trips it links, and with no span at all it offers
nothing rather than everything.
The desk offers alternative routes from the drive band between two stops;
the phone had nothing. A leg in the phone chain now carries one round
button that asks the router for other ways and switches to the map, where a
bar takes the stage bar's place: the ways as chips with their colour, time,
distance and what sets them apart, and a confirm button. On glass there is
no hover, so a tap on a chip or on a line only previews that road; confirm
writes it. The button shows only where the desk offers it (a routed leg
between chosen stops), for someone who may edit the day, and not offline,
since vias are written online only.
The picker could not have stayed open on a phone at all: the planner closed
it whenever road trip mode was off, and that mode is off on a phone by
design, so the next render shut it. The close now follows where the picker
can be seen (road trip mode on the desk, the road trip tab on a phone), and
useRouteAlternatives returns a memoised object.
The rules both shells need are shared: legReroutable in the row model,
alternativesPhase and alternativeSubline next to the overlays, and the desk
bar and sidebar read them too with no visible change. Both map engines take
an optional fitPadding, so the phone frames the leg between the day chips
and the bar instead of under them.
Two faults behind one round button on the phone map.
The base layer switcher that both engines draw in the bottom left corner
sat on top of the GL compass, which started 8px to its left and ran on
under the frosted shell, so it read as a second button showing through.
The compass now stands beside the switcher, placed off the switcher's own
exported inset and size so the two cannot drift apart again.
Satellite never drew on GL because applySatellite gave up whenever
isStyleLoaded() was false and only retried on styledata. That flag is false
while any source has tiles or a setData in flight, which on a phone is the
usual state, and styledata does not fire when those finish. On the road
trip stage every tap met a busy style, because the settings write
re-rendered the shell and handed the map fresh stage arrays. The guard is
gone (the pass only runs after load, and addSource/addLayer only refuse a
style document that is not in yet), an existing layer just flips its
visibility, and a source left without its layer still gets the layer.
The stage data in MMapArea is memoised, so a store write no longer refits
the camera or sets the route, access and place sources again.
A road trip tab on the mobile trip screen: the stage as a chain, the same
map underneath it, the sheets a passenger needs, and a search along the
route.
The addon was desktop only because road trip MODE is a data switch rather
than a view switch. It rewrites `assignments` and `places` for the whole
planner hook, and every mobile sheet is permanently mounted and reads those
same two lists, so turning it on there brought back documented regressions.
The mode flag is therefore untouched. A second flag, `roadtripFeedActive`,
feeds only the routing round and does it off the STORED assignments, so the
phone gets the drive without what the mode drags along with it.
The map is one instance shared by the plan tab and the road trip tab,
hoisted into a single JSX expression so React keeps it in the same position
and the WebGL context is never torn down on a tab switch.
The corridor search is scoped to what a phone can afford: a window of the
day rather than all of it, a smaller tile ceiling, a capped retry pass and a
deadline. The standard search is three requests where the desk makes
fifteen. The categories are deliberately not narrowed, because they all ride
one query per box, so a second one costs nothing.
Two gaps found while wiring it up are closed here as well. The fuel search
drew its offers nowhere on the phone, so the button did nothing visible;
they are in the dry band now, with the detour, the spare range and an accept
button. And the map credit opened as a two line ribbon across a screen the
map fills: both GL engines now start it collapsed, and Leaflet, which has no
collapsed mode of its own, is given one.
The Atlas country check timed out. It asked Dawarich for a year of visited
cities in one request, and Dawarich computes that over every point in the
window with nothing cached, so a dense recorder never got under the 15 s the
server allows. The year is now asked for a month at a time, one request after
another, and folded back together. The windows sit a second apart because
Dawarich reads the bounds as inclusive.
The recorded route only appeared after a reload. Every Dawarich call from the
browser carried the shared 8 s timeout, so the browser gave up while the server
carried on and cached the answer for the next page load. Calls that make the
server talk to Dawarich now wait two minutes, the Atlas four. On the GL
renderers the draw also gave up whenever isStyleLoaded() was false, which it is
while any tile is still loading, and only retried on style.load. It now waits
for idle. The hazard overlay had the same guard and gets the same wait. The
pill shows a ring while the route loads, so a slow first fetch no longer looks
like "done, nothing there".
A collapsed day now takes its recorded route off the map, following the same
folds the planner already applies to places, the road trip sidebar's included.
Asked for in the feedback: a wall of round photos, and no way to tell which is
which. "Name and displaying any custom rating would be very beneficial to quickly
seeing what is around you that is of interest."
The collections map had hover switched off. The trip map has told you what a
marker is all along, so it is the same card, now shared instead of written a
third time — it already existed twice, once per renderer, and the two had drifted
in how they resolved the category icon.
The card gains a rating, and so does the marker itself: an amber disc on the
corner where a trip's day numbers sit. The two never collide, because a numbered
stop is one already planned into a day and this answers the question asked before
that. Nothing is drawn for an unrated place, which is most of them.
Also from this round: the place panel's labels move up beside the name, where a
label belongs — read three rows down they looked like a property of the rating
above them — and the rating gets a ground of its own so a line of stars stops
reading as another row of text.
Opening a place sent it from the bottom left of the map to the top, which reads
as the control moving house rather than as room being made. Nothing was in its
way: the inspector is a card centred between the sidebars and at most 800 wide,
so the corner it was clearing is one the card never reaches.
Both renderers, since the switch is not supposed to move when an instance changes
its map.
The trip planner and the journal get a "From Dawarich" list: the stays
recorded for those dates, each one a row that can be dismissed or turned
into a place or an entry after a review step that shows time, name, note
and day. A place that came from a recording carries the Dawarich mark
next to its name so its origin stays visible afterwards.
The recorded route lies over the trip and journal maps as an overlay,
coloured per day and cut along the reader's own timezone rather than
UTC. It is fetched for the window on screen and never stored.
The Atlas gets its own panel beside the map for the countries and cities
the recordings prove, and the wish list is ticked off there, on the day
of the visit, undoably. The phone has its own take on all of it, in the
mobile shell's colours and with native sheets.
A day that runs past midnight used to keep every one of its stops on its own
card, so day one ended at 03:12 with three places nobody reaches on day one and
day two began with a drive that had already happened. The rail now lays the
stops out by the date they are actually reached: when the clock goes backwards
between two arrivals the ones after it move to the following day, into a block
that says where they came from, and the night drive and its kilometres go with
them. It is an arrangement, not a write — the day planner beside it is
untouched, nothing reaches the database, and a shorter stay the evening before
puts everything back on its own.
The map follows the same arrangement, because a boundary drawn in the rail and
not on the map is two answers to one question. Day one now ends where its last
reachable stop is and the line, the legs and the totals are cut to match.
Two switches in the driving settings, off by default. "Connect the days" routes
the gap between one day's last stop and the next day's first, which is real
driving the rail has never drawn, and counts it. "A colour per day" then puts
the days back into a line that has become continuous, and tints each day header
to match.
Collapsing a day from its header takes its route and its places off the map as
well as out of the rail, and the categories in the corridor panel fold the same
way. The refuel band is one full-width red band with the pump as its button,
the results are chips, and the driving dialog is two columns of panels with the
figures on one right edge.
Also fixes a via that would not adjust the route once dragged. Five separate
causes, all measured rather than guessed: leg threading used the card index
instead of the owning day's, the anchor lookup returned chain indices, it
filtered by the card rather than by the anchor's owner, seams were routed
without their vias, and a seam once routed was never re-fetched.
The imagery toggle has been there for a while and only ever worked on Leaflet, so
anyone on MapLibre or Mapbox — which is the default since the vector basemap landed —
had a switch they could not see and a view they could not reach.
Leaflet swaps its whole tile layer for the imagery. A GL map cannot: its basemap is a
style with dozens of layers in it. So the same tokenless ESRI source goes on as a
raster layer of its own, inserted before the first layer TREK draws, which leaves the
route, the pins and the tracks on top and legible. Switching back hides it rather than
tearing it down, so going to and fro does not re-fetch a tile.
Built on demand rather than once at load, because a basemap change rebuilds the style
from scratch and takes every source with it; the styledata event is subscribed for the
same reason. The switch reads the setting the Leaflet map already stores, so the choice
survives an instance changing renderer, and it sits in the same corner with the same
offsets.
Five things, all of them a click or a drag doing something the traveller did not
ask for.
The GL via handle committed a move on every pointerup. Any button started the
drag and there was no movement threshold, so a plain click wrote the via to
wherever inside the 17px handle the pointer happened to be — at a low zoom that
is kilometres, and the write re-routes the whole trip. A right-click ran the
drag AND the delete, so one gesture sent two writes; on the platforms where
contextmenu comes first, the move landed on an id that no longer existed and
reported a failure for a deletion that had worked. Leaflet gets this right for
free from `dragend`, which is why the two renderers behaved differently for the
same gesture. Primary button only now, with a threshold, and pointercancel puts
the pin back instead of committing — the browser fires it when the captured
element is torn out of the DOM, which is exactly what a delete does.
With the alternatives picker open, one click on the route fired both handlers.
Layer registrations are independent in MapLibre, and every alternative starts
and ends at the same two stops — when the leg already carries vias the current
road is itself one of the offers, so the overlap is the whole leg. The click
dropped a via AND chose a different road: two writes and two trip reloads for a
gesture made once.
The corridor search could be started before the day had routed. The corridor is
then built from the straight line between the stops rather than the roads
driven, and the routing answer landing a second later changes the line, which
clears the search mid-flight and drops every result — no error, no partial
result, just the idle empty state again. Routing runs one day at a time about a
second apart, so the window is wide open on a long trip.
Leaving road trip mode left the alternatives drawn on the map. The switch is in
the sidebar and reachable while the bar is open, and the overlay depends only on
the picker, so pale blue routes with drive-time pills stayed on an ordinary
planner map with no road trip UI left to dismiss them from.
Clearing a leg's vias swallowed its failure and closed the picker anyway. Every
neighbouring write in that hook reports one. The leg still carried its via and
still routed the old way, so the traveller believed they had undone the detour.
Walking and cycling legs were counted as driving. A day may legitimately mix
modes — splitIntoRuns exists for that — and a two hour hike was reported as
"over the longest drive allowed", its minutes went into the day's driving time
and its kilometres onto the tank, where a ferry crossing could trip a range
warning outright. A leg with no mode still counts, because every leg was a drive
before the field existed.
The road-trip domain also says out loud that it is online-only, which the repo
asks for rather than leaving it to be discovered. A via anchors by POSITION, so a
queued write replayed after somebody else moved a stop would re-pin the drive
onto a leg nobody chose, silently and hours later; the offline story needs the
anchor to be an assignment id first. Until then the surfaces disable the gesture
instead of accepting one and dropping it.
Six theme-lint markers move onto the line they exempt. The linter suppresses per
line, so a marker in the comment block above suppressed nothing and the six
road-signage colours the authors documented as intentional were counted anyway.
Placing one triggers a re-route, the re-route lands about a second later, and
the render it causes rebuilt every via handle — which is exactly when somebody
reaches for the dot they just made. On the GL renderer that rebuild replaces
the DOM element outright, and a pointerdown belongs to the element it happened
on, so the drag went to an element that no longer existed. The second attempt
worked because by then nothing was pending, and an older via never showed it
because nothing was re-routing.
Two causes, both identity: the vias arrive as a fresh object on every reload
even when the rows came back identical, and `onMoveVia` is a fresh closure on
every render of the planner. Both were in the effect's dependencies.
The list is now keyed by what a handle is built from — id and position — so it
only changes when a via does, and the callbacks are read through a ref. A via
that genuinely moved still gets a new list, which is what redraws it where it
now is; the test pins both halves, because holding the element still must not
mean holding it in the wrong place.
Leaflet's markers had the same churn without the same symptom: a fresh
`position` array called `setLatLng` on every marker on every render, and a
fresh `eventHandlers` object unbound and rebound every listener. Same fix.
A router snaps every waypoint to the nearest road before it starts, and OSRM
does it with no distance limit at all. A viewpoint above a valley, a farmhouse
down a track, a marina at the end of a pier: the drive to it really begins
somewhere else, and the line said nothing about that. It either stopped short
for no visible reason or appeared to cut across open ground.
OSRM reports the snap position and its distance in every single answer, and
this client has thrown both away since the first route was drawn. Reading them
costs no request and no key.
The gap is drawn as a dashed spur in the route's own blue, over the route
rather than under it, because it is the one piece of the line that is not
driving. Thirty metres is the floor, which is about a dual carriageway and its
verge, so a place pinned off an aerial photo does not earn a dash. From a
quarter of a kilometre the rail prints the distance too, because that is where
"the car park is over there" turns into luggage, a gate, or a track a hire car
should not be on.
Vias are deliberately left out: a via is a shape handle, not a destination, and
a dash hanging off one reads as a fault.
The road-trip addon's second half: the parts that let a planned drive be
argued with rather than only read.
Reshaping. A via records which stop it follows by position, and that position
is resolved fresh every time the day is routed — so inserting, reordering or
removing a stop moved the ground under every via after it, and the drive
silently snapped back to the road it had been steered away from while the
handle still sat on the map where it was left. The correction is computed
against the day as it stands and written with the same change, in one
transaction: a half-applied re-anchoring mixes two numbering schemes in one
day. The one judgement that needs geometry — which half of a split leg a via
belongs to when a stop lands in the middle of it — is measured on the road
actually driven, so a fuel stop added to a bent leg keeps the bend on the side
it belongs to.
Alternatives. OSRM answers most long legs with exactly one route, which read as
"there is no other way" when a perfectly good slower road existed. When it
offers nothing, the same drive is asked for again without the motorway, and
failing that without the tolls — one question at a time, stopping as soon as
one lands. The offer says what it is rather than how much slower.
Stops along the way. Everything the corridor search can find is a pause, not a
destination: fuel, charging, rest areas, campsites, food and sights all sit
inside the leg they were found on, carry their own colour and icon, and are
left out of every stop count. That colour is defined once and read by the rail,
the corridor list, the map pin and the picker — and it replaced the chains'
logos, which turned a corridor full of petrol stations into a row of
advertisements and left the brands with no logo on file looking like something
else entirely.
How long a stop takes was readable in the rail and writable nowhere; new places
were given an invented hour that nobody had entered. It is now set from the
rail, cleared as a zero because the update statement folds a null into "leave
it alone", and new places start with nothing.
Both columns are rebuilt on one type scale, anchored to the day plan's own
sizes so switching tabs does not change the size of the text beside it. The
rail reads as trip totals, day cards and a chain of stops with the drives
between them; the corridor column as what to look for, how the search is
getting on, and what it found. Six category pills over three lines became one
dropdown, which is the space the results wanted.
Also: the offered routes are framed on the map when the picker opens (`fitKey`
carries no coordinates and each renderer reads it as "the selected day"), road
trip mode does not cluster at all so the whole drive stays readable zoomed out,
and the drive-time labels finally render in the app's own typeface instead of
Leaflet's Helvetica. All of it in both renderers.
The road trip corridor asks for fuel, charging, rest areas and campsites over a
dozen boxes, and asking per category was four times the requests for the same
answer — slow, and four times the chance a shared Overpass mirror times out and
reports the stretch as unsearched.
`category` now takes a comma-separated list. Each OSM selector belongs to exactly
one category, so a hit is still labelled with the kind it answered, and the
result cap is shared out per category so one dense kind can't crowd the rest.
The MCP tool takes an array for the same reason.
Also puts the POI, plugin and route via-point pins on the map's render clock,
the same fix the planned-place pins already had: a library marker repositions on
every pointer sample while the canvas draws once a frame, so the suggestions
swam during a drag and snapped back on release.
Maurice