Anchoring the flipped popup to the trigger's top edge dropped the old
vertical clamp: with a short viewport the popup's top edge left the screen
and the month header became unreachable. The popup now flips up only when
there is room above; otherwise it stays below and is clamped so its top
edge never leaves the viewport.
The mobile payment sheet always sent the display currency, while it seeded
the amount raw in the currency the payment was recorded in. Correcting only
the day of a 1000 JPY payment turned it into 1000 EUR and froze a fresh FX
rate for it. The sheet now carries its own currency, seeded from the
payment (or the display currency for a new one) with the same picker the
expense sheet has, and the payment row shows the recorded amount next to
the converted one when they differ, like the desktop row does.
The day is now required in both payment forms. Cleared, the server stored
NULL and the ledger quietly fell back to the day the payment was recorded.
Editing/undoing a settle-up payment was desktop-only — the mobile ledger
row rendered it read-only, with a comment explaining the gap was
deliberate for now. Give it the same edit/undo affordance the expense row
already has: edit reopens AddPaymentSheet pre-filled (now doubling as an
edit form, same as desktop's SettlementModal), undo deletes it outright
with no confirmation, mirroring CostsPanel.tsx's undoSettlement.
CustomDatePicker flipped above a trigger by subtracting a fixed worst-case
height (360) from its top, regardless of the popup's real rendered height.
When that guess overshot — a short calendar view, or a form with little
room, like the settle-up modal — the gap left the popup floating away from
its trigger and over unrelated fields instead of sitting right above it
(#2334, found while testing the settle-up date field).
Anchor the flipped case from the trigger's own top edge via `bottom`
instead, the same technique useAnchoredPosition already uses for other
popovers, so the popup is always flush against its trigger no matter its
actual height.
The settle-up form only exposed from/to/amount and silently dated the
payment by created_at, unlike a regular expense which has an editable
date. Add a settled_at column (independent of created_at, same split as
expense_date) through the schema, migration, service, REST and MCP
surfaces, and the desktop + mobile forms; the ledger groups a payment by
settled_at, falling back to created_at for rows recorded before the
column existed.
The one model the addon offers to pull was Qwen3 8B, which is text-only, so a
scanned page or a photographed document reached it as no text at all and came
back empty. Qwen3.5 4B is multimodal at a third of the size: one download
covers every kind of document instead of leaving the operator to work out that
the recommended model cannot read half of them.
The list stays one entry long. A self-hosted host needs a model, not a menu,
and any other id can still be typed in or picked from what Ollama already has.
Sharing a list works between people on the same TREK. This is the other
case: giving one to somebody who runs their own, or keeping a copy. Export
sits beside Edit and Share in the list header and downloads the open list;
Import sits beside New list in the rail, reads a file, shows what is in it
and makes a new list of it. Desktop only, which the route already decides.
What travels is what somebody wrote down: the list's name, colour and
description, its labels, and each place with its address, coordinates,
notes, status, contact details, category name and labels. A file is dull
JSON on purpose, so it can be read and edited by a person.
What does not travel is everything that only means something on the instance
it came from. Ids of every kind, since the receiver issues its own and a
category crosses over by name. Star ratings and members, because a rating is
an opinion somebody gave the people on that list. Provenance into trips,
which points at rows the receiver cannot see. And an image path under
/uploads, which resolves on the sender's server: only an absolute https URL
survives.
A file is a stranger's JSON and is read as one. It is parsed in the browser
that chose it and never uploaded; the parsed list goes through the same
contract on both sides; and a link that is not http(s) arrives as nothing
rather than as an anchor. Strict where it must refuse, forgiving where it
can drop: a file that does not say what it is never reaches the importer,
while one unreadable place inside it is skipped and counted, and one bad
field on a good place costs that field alone.
An import is always a new list. Importing into an existing one would mean
deciding what happens to a place that is already there, and every answer to
that is a merge nobody asked for.
A public link showed a stop as its name and one line under it, the address
or the description, whichever came first. The owner had written both, and
a note on the place and another on the day, and had set how long they meant
to stay and how to reach it. All of that shows now, laid out the way the
planner lays it out, and every link leaves the page in a new tab with no
opener. A booking shows the note the owner attached and the page they
linked, labelled by where it goes.
What travels to the page is chosen column by column now, where it used to
be the whole row. The whole row of a booking carried its confirmation
number, its import trail and its raw metadata, and the metadata is where an
imported ticket keeps its seat and its record locator; the whole row of a
place carried the owner's booking notes on it and the Google identifiers.
None of that belongs to somebody holding a link. Metadata keeps the parts
that describe the journey, by an allow-list, so a field the import starts
writing tomorrow does not become public by appearing. Links are accepted
only as http or https, on the server and again on the page.
A new book was a cover, a spread and a back cover, so it opened straight
onto pages 2 and 3. A bound book does not: the inside of the cover is
blank, and the first thing facing the reader is a single right-hand page,
page 1. The same at the end, where a single left-hand page sits before the
back cover. Both are laid down now, empty, in a new book and in a laid-out
one, and they are fixed the way the covers are: an inner spread only ever
goes between them.
The page numbers follow. They were counted from a spread's position in the
array, which assumed the spread after the cover was the first, and three
places did that sum on their own. One function now counts along the book,
one page for a single leaf and two for a spread, so the sheet on screen and
the label in the print view and the folio on the page all say the same
number. A book with a first page starts at 1; a book from before the first
page existed has none and keeps the numbers it always had.
The date range on the photo picker had a calendar that moved one month per
click and no other way to move. A trip three years back was thirty-six
clicks away. The header is a button now, the way the app's other calendar
works: click the month to see the year's months, click the year to see a
page of twelve years, and the arrows step whichever level is showing. A
pick steps back down, and reopening starts on the days again. The same
component serves the entry editor, which keeps its trip-day dots.
A short transport hop is hidden once its two ends sit closer than a few
dozen pixels, so a booking that would draw as a dot does not clutter the
map. That check compared the endpoints, which was the whole line while
every hop was straight. A car booking is routed along the road now, and a
road that leaves a town, rounds a lake and comes back to the next town along
can run across half the screen while its ends project sixty pixels apart.
The whole drive vanished until the map was zoomed far enough in for the
ends to separate, which is the gap in the route the report shows.
The decision now walks the line that will actually be drawn, road route or
arcs, and keeps the hop as soon as that reaches the floor. A straight
two-point hop measures exactly what it measured before, so every existing
threshold holds for the case it was written for. One helper serves both
renderers, which also folds the two hand-copied floor tables into it.
Cases appended to four existing suites for the lines this branch left unrun: the
fold state and the map places it hides, the owner-based via anchor, the day seam
and the proportional geometry slicing, and the live roadtripVia:changed events.
With the four new suites in the commits before this one, coverage of the lines
this branch adds goes from 69 % to 96 %, measured the way the gate measures it —
the routed lines against the diff, not a file average.
Every added case was mutation-checked: the rule it claims to pin was broken in
the source and the case had to fail. Two of them found real defects rather than
missing coverage, and both are fixed here.
A via dropped on the incoming night drive went to the wrong leg. The guard for
it asked the insert index whether the point lay before the card's first stop,
and that index cannot answer: insertIndexForAlong clamps to at least 1 for any
card with two stops or more, and the rail publishes no other kind. So the branch
read correctly and never ran, and a via on the night stretch was filed after the
first drawn stop — the route ran forward, doubled back to the point and carried
on, which is exactly what the comment above it said must not happen. Asked of
the distance instead.
The two one-field writes the rail offers, the stop kind and the fill level, went
straight to the API while their neighbour checked place_edit first. The server
refused them, so nothing was ever saved, but a reader got an error toast for
touching a control that should not have acted.
TREK searches its own place index and OpenStreetMap. Neither carries a rating,
so "the best rated hotel around here" has never been answerable, and an operator
with a better index for their region had no way to reach the search box at all.
The searchProvider hook is that way in: a plugin is handed the query, a limit,
the language and the coordinate the search is biased toward, and answers with
places in the same shape the core search returns, plus a rating.
It sits beside the core search rather than inside it. The plugin runtime already
imports PlacesModule, which imports MapsModule, so asking the providers from the
maps service would close a module cycle — the same reason the other fourteen
contribution controllers stand next to what they contribute to. The client asks
both at once and merges, at the single point every caller already goes through,
so all nine search surfaces get plugin hits without knowing the hook exists.
A plugin index may never hold up the list: the client stops waiting at two and a
half seconds and the host gives a provider two, which is also why the budget is
the shortest of any hook here. With no such plugin installed the route answers
without reaching the runtime at all.
Every hit is normalized host-side and shared by the REST route and the MCP tool,
so a cap that holds for the browser holds for the assistant: coordinates are
range-checked, strings capped, the rating clamped to 0..5, a website must be
http or https, and ids are namespaced so they can never collide with an OSM one.
search_places_via_plugins is the MCP half, because what the user can see the
assistant has to be able to see; search_place now points at it.
Two people shaping one drive were each editing their own copy: a via dragged on
one screen reached the other only on the next reload, and the route it changed
looked settled until then. Every write in the domain now announces itself over
the websocket the rest of the trip already uses — the five REST routes and the
matching MCP tools alike, so an assistant moving a stop is as visible as a
person doing it.
Two new trip-scoped events carry it: roadtripVia:changed with the day's whole
via list, and roadtripTrack:changed. The whole list rather than a delta, because
a via is identified by its position in a chain and a delta protocol would need
an ordering guarantee to be worth anything.
The originating socket is excluded through the X-Socket-Id header the other
domains already forward, so nobody watches their own change arrive twice.
A day that runs past midnight used to keep every one of its stops on its own
card, so day one ended at 03:12 with three places nobody reaches on day one and
day two began with a drive that had already happened. The rail now lays the
stops out by the date they are actually reached: when the clock goes backwards
between two arrivals the ones after it move to the following day, into a block
that says where they came from, and the night drive and its kilometres go with
them. It is an arrangement, not a write — the day planner beside it is
untouched, nothing reaches the database, and a shorter stay the evening before
puts everything back on its own.
The map follows the same arrangement, because a boundary drawn in the rail and
not on the map is two answers to one question. Day one now ends where its last
reachable stop is and the line, the legs and the totals are cut to match.
Two switches in the driving settings, off by default. "Connect the days" routes
the gap between one day's last stop and the next day's first, which is real
driving the rail has never drawn, and counts it. "A colour per day" then puts
the days back into a line that has become continuous, and tints each day header
to match.
Collapsing a day from its header takes its route and its places off the map as
well as out of the rail, and the categories in the corridor panel fold the same
way. The refuel band is one full-width red band with the pump as its button,
the results are chips, and the driving dialog is two columns of panels with the
figures on one right edge.
Also fixes a via that would not adjust the route once dragged. Five separate
causes, all measured rather than guessed: leg threading used the card index
instead of the owning day's, the anchor lookup returned chain indices, it
filtered by the card rather than by the anchor's owner, seams were routed
without their vias, and a seam once routed was never re-fetched.
A consumption typed as 500 rather than 5.0 makes the tank arithmetic round to a
range of zero. Zero is a number, so the `??` in effectiveRangeKm took it as the
answer and discarded the range the traveller had typed by hand next to it, and
useVehicleRange then folded that zero to null. What reached the rail was "no
range at all": every fuel and charge warning went quiet, with nothing on screen
naming the field that did it.
A range that rounds below one kilometre is a typo rather than a car, so it is
reported as no answer and the typed figure gets its turn.
The fill level was one figure for the whole trip, and a trip does not have one.
A motorway rapid charger is worth about 80 % because the last fifth costs as
long again; the charger at the hotel is worth all of it because the car stands
there all night. Between those two the difference is a whole leg, and a single
setting has to be wrong about one of them.
So the badge on a refuelling stop is now the way in: it shows what that stop
will actually fill to, its own figure or the traveller's, and opens a panel of
the six answers people actually give. Under them it says what the choice buys in
kilometres, because 80 % is an abstraction and "about 290 km from here" is the
thing being decided. Picking the figure a stop already has hands it back to the
setting, the same gesture the kind picker uses to un-pick a kind.
The value lives in places.fill_percent, beside stop_type, because it is a
property of the stop rather than of the person. Null means "follow the setting",
which is every stop that predates the column and every stop nobody has an
opinion about, so nothing changes for a trip that never touches it.
Two pieces of shared machinery came out of it rather than being copied. The
popover chrome — measure before showing, flip when the window is short, close on
an outside click, Escape or a scroll — is one component now, used by the kind
picker and this one. So is the assembly of the range from seven settings, which
the routes hook and the rail both need and which would have drifted the first
time a field was added.
A range could only be typed as one number, and that is the number fewest
travellers actually know. A tank size is on the filler flap, a consumption is in
the manual, a battery capacity and a kWh per hundred are on the data sheet. All
of them divide into the same figure, so the dialog now takes either and does the
division itself. What the parts say wins over what was typed, because it is the
more specific answer, and the range row goes read-only when they do so there is
never a second answer to the same question.
Of ABRP's list only battery wear is here. Plug type, reference speed, relative
speed and drive style shape a consumption PREDICTION; this addon does not
predict one, it divides a capacity by a consumption the traveller states, so
those fields would add typing without moving a kilometre. Wear is different in
kind: it shrinks the capacity itself, and on an older car by enough to decide
whether the last leg of a day arrives.
Storage stays metric throughout, the same rule the range itself follows. An
imperial traveller types gallons, miles per gallon and kWh per 100 miles and
gets them back unchanged; mpg is the inverse of litres per hundred rather than a
scale factor, which a straight multiplication would have stored as a car four
times as thirsty.
The gauge under the picker is the argument that these two ways of stating a
range are the same thing, so it answers while the figures are still being typed
rather than after the field is left. It draws the tank the day it left the
factory: the filled part is what a stop actually puts back in, the hatched tail
is what age has taken off, and both are things the bare number cannot say.
Also here, from the same round: a fill-up that stops short of full. Nobody
charges to 100 % on the road, and counting every stop as a full tank overstated
everything after it by that last fifth. Stops that refuel now carry a badge
saying how far they fill.
Four things that only showed up once it was on screen.
The range budget treated a petrol station and a charger as the same thing, so an electric
car pausing for coffee at a filling station had its battery refilled on paper: the
warnings went quiet for the rest of the day and the driver was told nothing. A vehicle can
now be named, and then only what actually refills it counts — and the search asks for that
kind alone instead of offering pumps to a car that cannot use them. Not saying keeps the
old behaviour, which is what everybody who never opens the dialog is on.
The band was its own shape in a rail made of drive bands. It is one now: the same rail,
the same height, the same type size, a warning tint instead of a ring, and the figures
where a drive band keeps them. The buttons are icons of the same 18px square the shuffle
mark uses, so the band stays one line beside its neighbours.
The old range warning stood down where the band shows. Both at once said the same thing
twice in the wrong order — the answer above the problem — because the warning marks the
stop somebody finds out at while the band sits on the leg the fuel ends on.
Two measured corrections to the search itself. The server turns a box into a circle of
half its diagonal and silently narrows anything past 20 km, so a box of ±25 asked for 35
and came back flagged as narrowed EVERY time, which read on screen as "we could not
check"; ±14 asks for 19.8 and is answered in full. And the circle is centred 12 km before
the dry point rather than on it, because only road already driven is any use — centred on
the point, half the circle was spent on road nobody can reach.
An answer that finds nothing now leaves the button rather than only a close. The place
search is a shared public service that does time out, and "it did not answer" with no way
to ask again reads as broken rather than as busy.
The range budget has always been able to say "you have driven 245 km on this tank" and
never "and here is where to do something about it". The review put it plainly: the value
is in the suggestion, not in the warning.
The warning sits on the stop the car ARRIVES at, which is where somebody finds out. The
fuel runs out earlier, often most of a leg earlier, and a filling station offered at the
warning is one the car cannot reach. So the dry point is computed where it actually is,
a search runs around it on request, and what comes back is filtered to what can be
reached.
Three filters, each one there because its absence gives a wrong answer rather than an
untidy one. Only what lies before the tank empties, because a pump past it is on the far
side of an empty tank. The detour counts double, because 8 km off the road is 16 km of
driving. And a reserve is kept back, because the range figure is a round number from a
manual, not a measurement.
Sorted by the detour rather than by how far it gets. Measured on a real day between
Hamburg and Berlin: the station that got furthest was 9.2 km off the road for one
kilometre more of range, while one 0.9 km off sat almost as late.
Deduplicated by name and half a kilometre, which also came out of that measurement. OSM
maps a charging site as one node per socket: the first three offers were the same
"autostrom plus GmbH" three times over. The four nodes sat in two pairs 6 m and 7 m
apart with 450 m between the pairs, while genuinely different branches of one chain were
18 to 36 km apart — so anything from 500 m upwards separates the two cases.
An empty answer says which kind of empty it is. "Nothing on the reachable stretch" after
a request that failed or was cut short states something that was never checked, and the
server flags both cases itself. Offline it does not offer at all: the place write queues
offline but the day assignment does not, so accepting one would leave an orphan.
Nothing is searched until it is asked for, and one press is one request against a small
circle rather than the sixteen boxes a corridor run costs. Accepting hands the choice to
the same popup a corridor hit goes through, so the stop kind, the dwell time, the
position, the via re-anchoring and the re-route are the paths that already work.
The dry point counts DRIVING metres only. The day's drawn line concatenates every run,
ferries and walks included, while the budget skips those, so walking that line to the
same figure would overshoot by the length of any crossing and put the marker out at sea.
deriveDriveWarnings knew the distance and threw the position away. The warning is filed
against the stop the car ARRIVES at, which can be most of a leg past the point the fuel
actually ran out — fine for a warning, useless for a suggestion, because a filling
station offered at the warning is one the car cannot reach.
emptyAt is a fourth field on the return object rather than a field on each warning, for
two reasons. Five tests assert warnings with toEqual and an extra defined property fails
them all. And a dry point is once per TANK while a warning is once per stop: a long
stretch with nothing on it warns repeatedly on purpose, and one refuel offer per warning
would stack three identical offers for one fill-up down a single day.
drivenMeters counts driving legs only, which is the whole reason it is counted here
rather than derived later. The day's drawn line concatenates every run, ferries and walks
included, while the budget skips those — so walking that line to the same figure
overshoots by the length of any crossing the day contains and puts the marker out at sea.
pointAtMeters walks the driving-only line instead.
Extract the day route builder out of useRouteCalculation into a pure module and
aggregate it over the whole trip: one map with every day's route, each day in its
own colour, the mode per stage and the trip's total distance. Straight lines first,
roads as they answer; a refused leg keeps its line and adds no distance.
Give the floating map controls one shared drop shadow while adding the toggle, so
the new pill and the base-layer switcher stand off the tiles the way the locate
button always has. Document the control in wiki/Map-Features.md.
Addresses #1736
Dragging a via somewhere else on the map changed where the point IS and never where it
sits in the chain. The anchor that decides which two stops it is threaded between was
worked out once, when the point was dropped, and the drag sent only coordinates —
`roadtripViaUpdateRequestSchema` carried a lat and a lng and nothing else.
So a via pulled past the stop it used to precede kept claiming the earlier leg. The
router then drove out to it and turned back before carrying on, which on screen is not a
subtly wrong route: it is a spur that reads as the drag having done nothing at all, with
the original road still sitting there unchanged.
The anchor is not a property of the point but of where the point sits along the drive, so
it is recomputed on a drag the same way it is on a drop. The projection that did that was
inline in addRoadtripVia; it moves to a shared `anchorFor` and both callers use it.
A drag differs from a drop in two ways, both deliberate. It measures against its OWN day:
letting the nearest day win, which is right for a click on open map, would hand the via to
a neighbouring day whose road happens to pass closer and make it disappear from the day it
was dragged in. And it has no 2 km guard: pulling a via well off the current road is
exactly what the gesture is for, and the anchor only says which leg gets bent.
`after_order_index` is optional on the way in, so a drag inside one leg and an older
client still send just the coordinates, and the stored pin is then left alone rather
than cleared.
Maurice