With the road trip addon on, the desktop panel puts the Days / Road trip
switch above the day list. The list was sized by height alone, so it ran the
switch's height past the panel's clipped edge and the last day could never
be scrolled into view. It is a flex child of the panel now and yields that
height; where nothing sits above it, the height still fills the panel.
A hotel entered under Days with a check-in at ten was reached at a quarter
past twelve in road trip mode. Two things: the schedule read the check-in
as a floor that held nothing once anything before it set the clock, and
the server seated the night last unless something pinned later pulled it
forward, so two stops without an hour stood ahead of it.
The check-in now pins the night the way its own time would, in the plain
schedule and in the daily window, where a check-in the drive cannot make
is the conflict a missed pin is. The night is seated first on its day;
only a stop with a clock at or before the check-in stays ahead of it, and
the stops without one follow. A new check-in seats the night afresh, a
change of notes leaves a dragged night where it is.
A day that is nothing but its booked night stands among the days now,
with the hotel and its check-in, instead of at the foot of the rail under
"only X so far", which read as the hotel missing from the road trip.
The client puts a stop the server seated at the front where the server
put it, rather than appending it to draw second until the next reload.
On a 1080p screen at 100% the release notice's right column runs out of
height. The column scrolls, but the promise box is a flex item with
overflow hidden, so it may shrink to nothing and was pressed down to its
label while the paragraphs around it kept their height. Everything inside
the two scrolling columns now keeps its size.
Below 1080px the halves stack and the panel scrolls; the single minmax row
that keeps the two-column layout inside the panel starved the release half
to zero height there. The rows go back to auto, and the ask sticks to the
bottom edge once the note is in view.
Paperless-ngx, Papra, Nextcloud, OpenCloud and Synology Drive are a headliner
of this release and were missing from the notice. The card runs across the row
under the three upright ones, picture beside the text, so the panel keeps its
height: the wordmark without its API pill, the two-way arrow, and the five
stores as tiles. The panel's grid row is capped at the panel's height, so a
short viewport scrolls the left column instead of clipping the support buttons
on the right. The headline counts four, the intro and the card texts are
shorter, and the Dawarich card drops its last sentence, in all 23 languages.
The release e2e test asks with the bundle version, as the client does.
After an update the service worker keeps serving the previous bundle until
the new one is installed. That shell announces the release layout too, so
the layout alone let it draw the notice with its own older texts and use it
up for the version now running with one click on X.
The bundle now sends the version it was built as (client/package.json, baked
in by define), and the server compares it with its own before it hands a
notice with a release block over. A shell of another version is told nothing
and gets the notice after the reload, from the bundle that can draw it. This
holds for every update, not only the one that introduced the parameter.
Every file the release touches was read once more, and what survived an
independent check against the code is fixed here, with a test for each.
Data and credentials
- A document sync connection edited to a new address no longer carries the
stored token along: a blank form under another origin is refused, the same
rule the probe route already had. Dawarich and AirTrail testConnection send
the stored key only to the host it was stored for.
- The key rotation script now covers document_connections.secrets and
trip_document_links.webhook_secret, which it had skipped.
- Turning a booked night into a pause in the road trip popup asks first and
says that the booking and its expense go with it. Deleting a place says the
same when a night is booked there, on the desktop and on the phone.
- A moved version marker over unchanged bytes no longer replaces the TREK file
and its attachments; a real revision carries the attachments over.
Planner
- A drop in the day plan names the row it lands ahead of in the full day, so a
hidden hotel stop no longer shifts it one slot early; the store sorts before
it splices. Via re-anchoring, the booked-night guard and the sidebar's day
membership read the stored day, the index space the server uses.
- A hotel stop placed mid-day re-pins the road trip vias of that day, and the
booking session receives the new stop order too. The Public API and the iCal
feed list a booked hotel once. A plugin can no longer write a stay against
another trip's day.
Road trip and map
- The route overview paces its requests to the public routers and retries a
rate limit, and it says which legs it could not route instead of quietly
reporting a shorter trip. A click on a via handle no longer drops a second
via; handles hide when zooming out. Read-only members cannot edit the driving
limits. The phone shows a way back when no day is picked and prints the night
drive departure in the chosen clock format.
Integrations and search
- Google transit keeps conventional trains when the train chip is on.
TREK_PLACES_ENABLED=false stops the details and enrichment calls too, and
accepts the whole boolean family. A caller-supplied description no longer
lands in the instance-wide enrichment cache. Nominatim searches carry a
timeout. An OSM place id is checked for shape before it reaches Overpass.
- Dawarich puts a stay on the trip whose dates hold it, the Atlas hand-off
knows what the Atlas already shows, and a host change with a new key clears
the old instance's state.
- Document sync: a webhook address pasted by hand works on the token alone,
deleting a connection unregisters its subscriptions, Nextcloud under a
sub-path connects, Synology answers a name collision before uploading and
verifies a move into the bin, Paperless titles are capped at 128 characters,
a DNS failure reads as unreachable rather than as a policy verdict, videos
from the store are accepted like uploads, and remote_missing has a way out.
Conflict buttons only for the owner, a refused choice is reported, a refused
credential gets a Reconnect button, disconnecting asks first on the desktop
as it does on the phone, and the folder picker no longer spins forever.
Release
- The server holds the release notice back from a bundle that cannot draw it,
so the previous shell served from the service worker cache after an update
no longer shows bare keys and no longer lets a click use the notice up.
- Import into an existing list gets the same body limit as a new list. Chat
images say when the limit is reached and the new controls are translated.
The transit backend switch reports a failed save. The Helm chart carries the
Amap credentials in its Secret; the shipped templates document the Places
API and Amap variables and the Overpass default. The wiki follows.
"This day" sent the entry's calendar date to the provider as both bounds, and
both providers turned that date into a UTC window — Immich by concatenating a
Z suffix, Synology by relying on a date-only string parsing as UTC midnight.
For a reader at UTC+10 the searched window was 10:00 on the day to 09:59 the
next morning, so every breakfast photo was missing while the next morning's
turned up in its place, and nothing said the day was incomplete. The date
headings had the mirror defect, filing a 07:32 photo under the previous day.
Immich publishes the right anchor already: localDateTime is required on every
search result and is what its own timeline groups by. The window is padded by
a day on each side and the page narrowed again by each photo's own local date,
carried through as localTakenAt; a server that does not send it falls back to
the timestamp used until now, so nothing changes there. Because the padding
means raw rows and answered rows are no longer the same thing, the page is
filled server-side until it holds what the caller asked for, bounded so a
pathological album cannot spin.
Synology has no local stamp, so its anchor comes from the caller as a UTC
offset, resolved for the day being searched rather than for today — a day
looked up across a DST boundary would otherwise start an hour out. The MCP
tool takes the same optional input, defaulting to the behaviour it has now.
The picker's pagination sentinel moved out of the non-empty branch: a page the
new filter empties has to keep paging, and it now says so instead of claiming
there are no photos.
Closes#2336
A trip that models one building as several stops — drop the bags, check in,
the museum inside the hotel — drew every pin on the same pixel, and only the
top one could be clicked, hovered or seen. Clustering is the mechanism for
exactly that: the plugin keeps children no zoom level can separate in one
cluster and fans them apart on click. disableClusteringAtZoom pinned the
group's own maximum zoom to 8, which both removed every cluster above it and
moved the only fan trigger into a zoom band a trip planner never operates in,
so the spiderfyOnMaxZoom set beside it could never fire.
The cutoff is gone. maxClusterRadius is a function of zoom instead: the same
generous radius as before in the overview, a pin's width above it, so stops
that are genuinely apart keep their own pins and a pile becomes a counted
bubble that fans open. Selecting a buried stop from the places rail now opens
the bubble it is hiding in rather than doing nothing visible, and it does that
without moving the camera, which stays the selection's own concern.
The GL renderer has no fan to open, so folding a pin there removes the only
thing that was left rather than providing a way in. It folds at a far tighter
radius — genuine coincidence, where nothing was reachable to begin with — and
draws the selected member of a pile, so the rail reaches it there too. A map
object without a projector now skips folding instead of dropping every marker.
The public share page spreads the same options and has no rail to fall back
on, which made it the worse case; it is fixed by the same change.
Closes#2344
Two boot migrations. The first appends the missing dated days to a trip
the old 365-day cap clipped, only where the dated days still run unbroken
from the start date, so a trip that was re-dated by hand or lost a day in
the middle is left alone; dateless days that hold content stay behind the
dated ones as generateDays keeps them. The second rebuilds
roadtrip_day_boundaries without the CHECK that held day_number to 366,
which would have refused a boundary on a later day of a longer trip.
The road-trip contracts follow the same limit: the day boundary and
corridor schemas, the set_day_boundary tool and the day window's runaway
guard read MAX_TRIP_DAYS instead of their own 365 or 366, and the
tooLong message carries the number as a placeholder in all 23 locales.
A trip longer than a year stopped at day 365: generateDays capped the day
rows at MAX_TRIP_DAYS while the trip kept its full end date, so the last
days had a date but no day to plan on, in the day list, the transport and
booking dialogs and the phone's date pickers (#2403).
The limit is MAX_TRIP_DAYS in @trek/shared now, 999 days, shared by the
server, both trip forms and the MCP tools, and a range past it is refused
rather than cut short: 400 on REST, an error result on MCP, bad params on
the plugin RPC, and a message in the forms before anything is sent. The
check runs before the trip row and the budget are touched, also catches a
start date moved past the stored end on its own, and holds a day_count
rebuild to the same bound. A trip that already carries a longer range can
still be renamed. The MCP-only 90-day ceiling on create_trip goes with it;
it clipped dated trips the same way.
Closes#2403
The import dialog always made a new list. It now asks where the places go:
a new list, as before and still the default, or a list that is already there.
The picker offers the lists the person may edit, which is their own plus a
shared one where they are an editor or an admin, and starts on the list they
have open.
Adding to a list only ever adds. A place the list already holds is left
exactly as it is, with its status, notes, rating and labels, and counted as
already there in what the import reports; it is recognised the way a single
save recognises one, by provider id, then name, then position. The list keeps
its own name, colour, icon and description whatever the file says, a label
the file brings is created only when the list has none of that name, and new
places are appended after the ones already there so a manual order survives.
The route is POST /api/addons/collections/:id/import, 200 because it adds to
a list rather than making one, and both imports now write their places through
the same helper.
The connector menu on the phone listed only the road profiles, so the
transit search could not be opened for a single leg there. It now carries
the Public transit entry whenever the trip has dates, seeded with the leg's
two ends and the departure of the stop it leaves, and the transport sheet
passes that departure on to the search.
The prefill is built by one module the desktop day plan now uses as well.
Closes#2398
A list could leave the instance as a TREK file, which only another TREK
reads. Export now asks for a format, and GPX is the second one: the
places as waypoints, for OsmAnd, Organic Maps, a Garmin or gpx.studio.
Import takes a GPX in the same dialog as a list file. Asked for in
discussion #2301.
The GPX is written from the very list file the JSON export returns, so
what may leave the instance is still decided in one place. Name,
description and address, notes, website and category go into GPX's own
elements, where every app shows them. Labels, status, phone and the
rest travel in a TREK extension namespace, so a GPX made by TREK comes
back as the same list. A place without coordinates cannot be a
waypoint; it is left out and the export says how many were.
A GPX is read on the server, sent as text, with the XML library the
trip importer already uses. A document with a DOCTYPE is refused before
parsing, which closes both external entities and entity expansion. Size
is capped like the list file, and the element count is capped before a
tree is built. The reader only turns the GPX into a list file: the
browser previews it and imports it through the existing route, so one
contract, one transaction and one skipped counter cover both formats.
Waypoints and named route points become places; tracks and unnamed
route points are counted in the preview and not imported.
The two list-file routes get a body ceiling of twice the file limit.
The global 100 kB cap refused most real favourites files, and it
already refused list files well under the megabyte the contract allows.
A visit's End could be edited and was shown in road trip mode, but the
schedule never read it: the drive always left a stop after its stay, so
a traveller who knew when they had to leave but not how long they would
stand there had no way to say so.
The End is now the time the drive leaves. RoadtripStop.leaveAt is
filled from the visit's End (or its place's) on the client by
useRoadtripRoutes and on the server by roadtrip-plan.service, so
calculate_roadtrip and get_roadtrip_context agree with the planner, and
computeSchedule takes it as the departure it already knew how to hold.
With Start and End both set the stay is the time between them. With
daily travel times on, the stay is the time until then, and an End
before the window start starts the day early the way a Start does.
Before the first fixed time the chain works backwards through an End as
it does through a pinned Start.
An End is read against the drive: the last passing of that clock time
counts as missed when the drive went past it on the road or earlier
the same day, anything else is the next one, so a drive across
midnight neither waits a whole day nor pretends to be on time. A drive
that gets there after the End leaves on arrival and files a
missedLeave finding, shown beside the late badge in the rail and on the
phone.
The rail's STAY badge, the inspector's Stay tile, the phone stop sheet
and the phone chain show the stay the End makes, with an "until 14:00"
hint. It is read off the schedule and never written to
duration_minutes: the stay belongs to the place, the End to one visit,
and a stored copy would go stale as soon as the arrival moved. For such
a stop the stay dialog, desktop and phone, shows that stay read only
and offers to remove the End, through the visit's time route with an
offline path (assignmentRepo.setTimes, setAssignmentTimes). While the
road trip is on, the End field in both place forms says the drive
leaves at that time.
The dead checkoutAt in the plan service is gone. New strings in all 23
locales.
Saving a start on a stop rewrote the whole day as the timed stops in
time order followed by every untimed stop. Its own comment and the
commit that added it promised that untimed stops keep their place, but
a day of two untimed stops and a third one given 14:00 came back with
the third one first. On a road trip the stop order is the drive, so
the day was re-routed, its vias landed on other legs, and collaborators,
who only got the one edited row, saw a third order until they reloaded.
The intended rule, an untimed stop inheriting the time of the timed
stop before it, now lives once as chronoOrder in @trek/shared, used by
both the day plan (dayMerge) and AssignmentsService.updateTime. The
server still reads a booked night's hour from its check-in, and a value
without a colon still sorts after every clock time.
The day is sorted only when the stop's start actually changed, so
taking an End off or saving an unchanged start no longer snaps back a
day somebody dragged out of time order. A sorted day is numbered from 0
like a drag. In the same transaction the day's road trip vias follow
the stop they were drawn behind, the planner's own drag rule, and a
via behind a last stop that stays last is kept, so the drive into the
next day keeps its road.
PUT /assignments/:id/time and the MCP update_assignment_time tool both
broadcast assignment:reordered with the whole day, to the writer as
well, and roadtripVia:changed when vias moved, so every client ends up
with the same order.
ASG-SVC-022, 023 and 027 pinned the old behaviour and now pin the
intended one.
The custom image control on a saved place's cover sat in the top left
corner, on top of the category chip, and hid half of it. It also looked
like nothing else on the cover: a square dark button next to a round
translucent close button.
The camera and the remove image button now sit in the top right corner
next to the close button, camera directly left of the X, remove further
left when there is a custom image, all three in the close button's
round translucent look with its hover, phone size and focus ring. The
phone sheet had the same overlap and gets the same row.
The category chip and the controls share one header, so neither can
run under the other: the controls hold the end and never shrink, and
the chip ellipsizes a long category instead of sliding under the
buttons in the narrow docked detail. On the phone the header is in
flow, so a place without a category starts its name below the buttons.
Picker, tooltip, labels, the spinner while an upload runs and the
removal control behave as before. The trip planner inspector keeps its
avatar overlay; it never had the overlap.
Both shells keep a binding on screen after an admin switches its
provider off, and name its store through storeName(), which falls back
to a providerName on the link before the raw id. The server never sent
one, so such a binding was labelled with the provider id. publicLink
now carries providerName from document_providers.name whatever its
enabled flag, and every route and the MCP listing that return links go
through it.
The comments on docsync:changed in the realtime schema and the client's
event policy say that the event now also marks a binding created or
removed, and that the Files screen re-asks whether to offer the sync
button when it arrives.
The check that was meant to stand a binding down when its provider is
switched off asked AddonsService.isAddonEnabled(link.provider_id). The
addons table has no rows for paperless, papra and the other document
providers, so it answered "off" for every binding, and every run came
back disabled before it listed anything. The unit test stubbed that
answer and the e2e never runs a sync, so nothing caught it.
isSwitchedOff() now asks the two things an admin actually switches: the
Documents addon, and document_providers.enabled for the binding's
provider. dueLinks leaves such bindings out in SQL, since one that
never runs never gets a last_sync_at and twenty of them would take
every slot of a tick. A run, the webhook on arrival and when its timer
fires, "Sync now" and the MCP sync tool all refuse before anything is
written, so a paused binding keeps its state and its documents' attempt
counters and resumes where it stopped. The REST route answers 409
provider_disabled, the MCP tool reports the same code, status() carries
providerOff per link, and both shells show one line saying the binding
is paused because its provider is switched off, in all 23 languages.
A failed pull_update also left the row stuck. upsertItem wrote the
listing's version, size and time next to the old bytes, so the next run
saw no upstream change, planned touch, which leaves error alone, and
the document stayed in error on stale bytes for good, "Sync now"
included. A failed transfer now leaves the pairing describing the copy
TREK holds; a new row keeps what pairs it but no version, so it is
fetched again.
The lines this branch adds used em and en dashes as sentence
punctuation across comments, JSDoc, CSS comments and test titles. Each
one is rewritten with a comma, a colon, parentheses or a second
sentence, keeping what the sentence said.
Only lines this branch adds are touched; everything that already
exists on dev stays as it is. No logic, error code or logged message
changes. The only string literals affected are describe and it titles,
which now read "X: topic" like the rest of the provider tests.
The Documents addon put a "Document sync" button on every trip's Files
tab, and the seed ships every provider switched off, so after the
upgrade each of those buttons led into "No document providers are
available". The button now shows on a trip that is already bound, to
every member, and otherwise only to somebody who may bind the trip on
an instance that offers a provider. Without it the Files toolbar is
the one from before the feature, trash flush right, on both shells.
/api/addons carries no document providers for a normal user, so the
answer comes from the docsync routes through a new online-only
docSyncRepo and is kept per session in docSyncOfferStore. A revisit
renders the last answer at once and checks it again; offline nothing
is asked and the last answer stands. Creating a binding, removing one
and removing a connection now ping the trip with docsync:changed and
zero counts, so a member already on the Files tab sees the button come
and go without leaving it.
Both shells keep listing a binding whose provider the admin has since
switched off instead of claiming there are no providers, and name its
store through one storeName() helper. A load that answers 403 or 404
clears the bindings as well, so they do not linger once the Documents
addon is gone.
The phone admin screen gets the Documents shelf the desktop one has:
the document providers as sub rows under the addon, toggled through the
same admin route and re-read after Documents itself is toggled, because
the server switches the providers off with it.
isTripOwner and the isOwner prop become canManageSync and canManage,
which is what canManageDocSync answers. Both folder pickers take
loadScopes out of the sync object before their effect, so
exhaustive-deps is satisfied without the effect running on every
render.
A place with an uploaded image showed a plain disc of its category
colour on the map, while a picked suggestion looked fine. The marker
sized its img with width and height attributes, and stylesheet rules
beat those: Tailwind's preflight gives every img height: auto, and
Leaflet's marker pane adds width: auto. Suggested and auto photos reach
the marker as 48px square thumbs, so nothing showed. A phone photo kept
its own proportions on the GL map, a sliver inside the circle, and its
full pixel size on Leaflet, where only the rounded-off corner of a
4000px image lands inside the circle. Both maps now build the img
through one helper that sizes it in its style, so object-fit: cover
crops any photo to the circle.
The thumb loading on both maps was keyed on place ids, so a change of
picture under the same place went unnoticed until a reload:
- Taking an upload off a place left the category dot instead of
bringing its auto photo back.
- Picking another suggested photo kept the thumb of the first one,
which was cached under the provider id. A picked photo is now its own
cache key.
PATCH links validated its body with a schema derived from the create
contract through .partial(). In Zod 4 a .default() still fires inside an
optional field, so a patch naming one setting arrived with every other
one filled in: pausing a pull-only binding switched it to two-way, reset
both policies and blanked its label. The update contract is now written
out without defaults, and an e2e test drives a patch through the real
pipe, which the controller unit tests never see.
Also, the cosmetic leftovers from the review:
- POST connections/:connectionId/scopes no longer wants the connection
in the body as well. It was required, never read, and let one request
name two connections; a client that still sends it has the key
stripped rather than refused.
- createLink loses the scope argument every caller passed as null.
- The controller's owner check is now assertCanManage, because it lets
instance admins through just as canManageDocSync does on the client.
Who may manage a binding is unchanged.
- document_provider_fields drops settings_key and payload_key. Nothing
read them: the connect form takes its fields from /docsync/providers
and the admin shelf sends none for document providers.
- The e2e test imports the provider classes under their new names.
The document-sync flow needed TREK's square app icon next to the
provider glyphs, and the PR got it by rewriting the shared TrekMark
component. TrekMark is the wordmark with the API pill that the admin
Places API card, the mobile admin block and the release notes popup
draw, so all three showed the app icon instead, and
AdminSettingsTab FE-ADMSET-031 failed on the missing "TREK Places API"
image.
TrekMark is back to its dev version. The app icon now lives in
TrekIcon, which DocSyncFlow and MDocSyncSheet use.
AddonManager had also switched Synology Photos to the Synology Drive
glyph, which renders as a block and sat off-line from the Immich row
under Journey. Photos keeps its own icon again. The new Documents
shelf gets tests: its rows and glyphs, staying out of the addon count,
hiding while Documents is off, the re-read after Documents is switched
off, and a provider toggle that saves without re-reading.
The binding asked at setup what should happen when both sides changed, stored
the answer, and nothing ever read it: every conflict was manual whatever the
binding said. The planner now acts on it — provider_wins pulls, trek_wins
pushes, anything else parks the row — and never in the direction the binding
forbids.
Conflicts themselves had no exit in either shell. The server has resolved them
since the first version and the strings have been in the locales just as long,
but neither the panel nor the phone sheet ever listed the rows, so the only way
to answer one was the MCP tool. Both shells now list them through one shared
hook with the same three answers.
Also:
- The desktop connect dialog shows a refused save instead of looking as though
nothing happened.
- An error the server phrases as a sentence no longer reaches the screen as a
raw translation key.
- The scope pickers depend on the stable callback rather than the hook object,
so opening one no longer re-lists the provider's folders on every render
above it.
More from the audit, each checked against the code before it was touched.
The webhook obeyed neither the Documents addon nor the app_settings kill
switch, so "switch document sync off" stopped the poll while every provider
holding a webhook carried on driving full runs. Both are now read on arrival
and again when the debounce timer fires, so a switch thrown mid-window still
takes effect.
Nextcloud's subscription registered its secret under `X-TREK-Docsync-Signature`
while the endpoint reads `x-trek-docsync-secret`: the subscription existed, the
calls arrived, and every one of them was dropped for carrying no secret the
controller could find. The two names now agree, and the test pins the one the
endpoint actually reads.
A WebDAV create was an unconditional PUT, so a name already taken upstream was
silently overwritten — two trips bound to one folder, or a `receipt.pdf` a
person put there by hand, is enough. Creates now send `If-None-Match: *`.
The per-item retry bookkeeping was stuck at both ends: the backoff was computed
at step 1 every time, so three of the curve's four steps were unreachable, and
the attempt counter only ever grew, which shelved a row that failed once a
month after six months of otherwise healthy syncing. A successful pass now
clears it, which is what makes the limit mean six failures in a row.
Also: a manual run on an orphaned binding is refused with 409 (its credential
belongs to somebody no longer on the trip, and the scheduler already refuses
it, so the button was a way around that); a document deleted while a run is in
flight is no longer uploaded anyway; a path-shaped WebDAV id containing `..` is
rejected instead of addressing a file outside the bound folder; and Papra's
multipart part header no longer takes an unescaped media type, which a CR could
end early.
Client: three writes in useDocSync swallowed their failure into `void` call
sites, a load failure blanked the panel to "no providers available" whatever
the cause, and overlapping loads let the slowest response win. Writes now
report, only 403/404 blanks the panel, and a generation stamp keeps the newest
answer. The dead lastRun state went with them.
The audit's worst find, reproduced against a live Nextcloud before and after the
fix: the WebDAV adapters answer "nothing changed here" by returning an EMPTY
listing plus `cursorUnchanged`, and nothing read that flag — `grep -rn
cursorUnchanged src/` found it set by four adapters and consulted by none. The
core therefore saw a folder that had lost everything. Run 1 and 2 look fine
because the run's own uploads move the ETag; from run 3 on, every run of an
idle binding ends `partial` with `mass_delete_guard` and six documents reported
missing, forever, until failure_count opens the circuit and the scheduler drops
the binding entirely. That is the ordinary case — a binding nobody is touching.
planReconcile now takes `remoteUnchanged` and plans only what happened in TREK.
Two ids were authorised by trip and never checked against it:
- resolveConflict took an item id on trust, so the owner of any trip could
decide a conflict belonging to somebody else's. Both are plain integers and
nothing compared them.
- The connection test merged the STORED credential into a probe of whatever
baseUrl the caller named — a way to have TREK post another account's API
token at a server of the caller's choosing. Stored secrets are now reused
only for the address they were stored against.
The phone's connect form was wrong in three ways at once, each of which the
desktop had right: it read the address as `baseUrl` while the field is
`base_url` (so every connection it saved carried an empty address), it drew
`allow_insecure_tls` as a text box and always sent false, and it built label
keys as `docsync.provider${cap(label)}` when the label column already holds the
full suffix — `docsync.providerProviderApiKey`, rendered raw on screen. Those
rules are not markup, so they now live in `useConnectForm`, which both shells
use. Its test fixture invented the field shape and so agreed with the broken
sheet; it now mirrors document_provider_fields.
Also: the scheduler read its interval once at bootstrap while this file's own
comment promised a per-tick read, so changing it did nothing until a restart;
and dueLinks ordered by a column that a successful run clears, which left every
binding tied and SQLite answering in insertion order — on a database with 170
bindings the same twenty ran on every tick and nothing created after them was
ever synced automatically.
The attempt counter and the backoff were written on every failure and never
consulted when planning the next run: rows were found in a live database at 46
attempts against a limit of 6, so a document a provider refuses — one it reads
as corrupt, a type it will not take, a full quota — was re-uploaded on every
cron tick forever. planReconcile now skips a row that is shelved or still inside
its window, and a manual run clears the counters, which is what "waits for a
person" has to mean.
The webhook had the same shape of bug: WEBHOOK_NUDGE_DEBOUNCE_SECONDS existed,
with a comment explaining it, and nothing read it. Providers fire once per
document, so twenty files dropped into a watched folder were twenty runs — the
in-flight guard answered `busy` to nineteen of them, throwing away nineteen
announcements, and the one run that did start had begun before most of the
changes landed. A burst now folds into one trailing run, and the binding is
re-read when the timer fires so a sync switched off in between does not get a
last run out of a stale row.
Four defects the new suites turned up, all fixed: the sync button lost its
accessible name below sm, where its label is hidden; the stored address was
never shown in the connect dialog although the form kept submitting it; the
allow-self-signed switch only read the connection at mount, so a stored "on"
showed as off and the next save wrote that back; and a refused folder create
escaped as an unhandled rejection with nothing said to anybody.
Also here: the phone shell gets the same feature (one sheet, four views, the
same hook as the desktop), the marks come from the product's own icon files
rather than redrawn approximations, and the 22 non-English locales carry the
new keys.
ADMIN-SVC-069 asserted that `documents` has no MCP surface. It does now, so the
test takes its example from MCP_GATED_ADDON_IDS instead of naming one.
A trip can be bound to a folder, tag or space in a self-hosted document store,
and documents then move in both directions: what someone uploads in TREK appears
there, and what someone files there appears in TREK.
Three decisions shape the rest.
The connection belongs to the TRIP, not to a person. Every other integration
here is per user, and photos are shared only through an opt-in flag; neither can
deliver "everyone on the trip sees the same documents", because visibility would
depend on whose credentials fetched a file, and a member without their own
Paperless account would see nothing. So the trip owner binds the trip once, the
server talks to the provider under that one identity, and TREK's own membership
decides who sees what. The provider never learns that TREK has members. When the
credential holder leaves the trip the binding goes to `orphaned` rather than
quietly carrying on with an ex-member's token.
TREK keeps the bytes. A synced document is an ordinary trip_files row, so
download, trash, offline cache, PDF export and backup keep working untouched,
and a provider outage does not blank out a trip that starts tomorrow.
Deletion never crosses the boundary on its own. A document that disappears
upstream is recorded as missing and waits for a human, and a run that sees more
than 40 percent of its known documents vanish at once refuses the whole listing
rather than acting on it: an unmounted share answers exactly like a mass delete.
The core reconciles by enumerating both sides, because the weakest provider sets
the model. A changed-since query cannot see a deletion, Papra does not move
updatedAt when a tag changes, a Paperless bulk edit leaves `modified` alone, and
Synology FileStation has no change feed at all. A webhook is therefore only ever
"look now", never a source of truth. Echo is caught by comparing content, not
timestamps: pushed_sha256 records what TREK itself wrote, so a provider
reporting TREK's own upload is not mistaken for a stranger's edit.
Provider differences are answered by capability data rather than by branching on
an id: stable ids where they exist (Paperless document id, oc:fileid, driveId)
and a normalised path where they do not, replace-in-place where the API offers
it, and a content hash from the listing only where the provider really supplies
one.
Admins switch providers on under Admin, Addons, Documents, mirroring how photo
providers hang off Journey, including the cascade and the 409 when the parent
addon is off. The per-trip setup lives in the file manager, where the person has
the context that makes the folder choice obvious.
A foreign-currency payment gained an exchange_rate in the ledger fixture without
the field on the local Payment type beside it, and the client typecheck has been
red since.
The button carried nothing and the form hard-wired the kind, so the categories
sitting directly above it had no way through and every manual stop started life
as a fuel stop with ten minutes on it. The click now carries what the corridor
is looking for, dwell included. The picker is multi-select, so the first kind
the panel lists wins rather than a fallback nobody switched on; with nothing
selected the form falls back on its own, because a stop without a kind is a
numbered destination that counts in every total.
This also closes the case it was noticed on: an electric car seeds the panel to
charging, so the picker said Charging over a form that said Fuel.
One request per day is thrifty, and the price of it is that a refusal is never
local. With the usual cause gone the shape of the failure is still there, so a
run the router refuses outright now asks for its legs one at a time instead of
leaving the day blank. The pairs are enqueued rather than awaited, so they keep
the spacing of every other request, and a rate limit is never split: answering a
host that asked for less traffic with four more requests is the opposite of
backing off. A refusal the host meant skips the two retries, because the same
coordinates earn the same 400.
Seam legs are merged under the day's own runs now rather than over them.
legsByDay is replaced whole on every routing round while seamLegs only ever
grows, so a pair that used to sit on a day boundary and now sits inside one day
kept an answer nobody re-asks for, shaped by the vias of a stop that has moved.
A day is routed as one request over all of its stops, and OSRM's car profile
forbids a u-turn at an intermediate waypoint unless asked. When it cannot obey
it refuses the whole request rather than the one leg, so a single stop on a dead
end took every leg of the day with it. Gouffre de Padirac snaps onto a cave
access road that goes nowhere else: each of that day's pairs routes fine alone,
all five together come back 400 NoRoute, and the same five with
continue_straight=false come back with their legs.
The permission goes on every request that has a stop in the middle, in the
browser and in the server's planning path, which had the same defect. Two-point
requests keep the url they had.
OSRM refuses an unknown query parameter outright rather than ignoring it, so a
router that has never heard of this one is recognised by its InvalidQuery,
asked again without it, and remembered per origin.
The server freezes the FX rate when an expense or a settle-up transfer is
entered and settles the balances with it, but the client ignored the column
and converted every amount with today's rate. A bill paid in dollars was
therefore worth something different each time it was opened, which a tester
noticed after settling up: the figure moved under him, and the row no longer
matched what had actually changed hands.
convertBooked applies the server's own rule, in one place for both shells and
the transfer rows: an amount already in the trip currency is left to the live
step, a frozen rate converts to the trip currency before the live step, and a
rate of 1 or none at all is a row written before the freeze existed and keeps
converting live.
The Up next card stopped printing a fixed key when the audit replaced the
nonexistent places.navigate with the single navigation target's own name, so
the assertion went looking for text that no longer exists and took the 4.3.0
branch red. The link is found by aria-disabled now, which is what the test is
actually about.
**"Today" was read off UTC while the clock beside it is local.** `localDate.ts` exists for
exactly this and says so in its own comment: between local midnight and the UTC rollover the
two disagree, so east of Greenwich the up-next card hung on yesterday's stage for the first
hours of every night, which is when somebody on a long stage is actually driving. Both the
stage hook and the corridor hook now ask the same helper the rest of the app asks.
**A refused day end left the switch showing a state the trip never reached.** The writer
catches its own failures and shows a toast, so it never throws and the sheet's catch could
not fire, which left the optimistic value standing. It answers whether the day end moved
now, and the switch comes back when it did not. The desktop control ignores that answer, as
it reads its state back from the trip.
**A timed-out corridor search reported more unsearched boxes than it had.** Every worker
still alive ran the deadline branch and each added the whole remainder, so three workers
reported three times the boxes left, which can exceed the number of boxes there ever were.
The remainder is claimed before it is counted, which also ends the other workers' loops.
**A night that fell mid-leg had its morning drive dropped from the stage map.** The join
mark went on the first leg of every day opening on an automatic night, but only a night
standing ON a stop is a connection between two days. `dayWindow` records that difference as
a whole `position` against a fractional one, and where it is fractional the morning drive is
the last stretch to this day's own first stop. It was being filtered off the stage while its
distance stayed in the day's total.
`mobileTrip.rtTruncated` interpolated a count into a sentence naming the stretch once, so at
one truncated area it read "1 stretches". Two keys now, picked by the count, the shape this
codebase already uses where a number changes its noun.
Writing the singular turned up three plurals that were wrong at counts the old one-form key
could never reach. Polish and Czech both had the genitive plural with a singular verb, which
is right at five and wrong at two; Arabic had the 3 to 10 form, wrong at two and again from
eleven. All three now put the count after a colon, where no form has to agree with it.
Russian and Ukrainian were already correct at both, since their phrase leads with a
locative, and were left alone.
The eight languages that keep the singular noun after a numeral differ only in the numeral,
which is what they should do.
**A saved stay left an invisible sheet standing, and the day swipe stayed dead behind it.**
The stay sheet reopened 'rtstop' by spreading its own payload, which carries a place id.
That sheet is located by day and assignment, so it resolved to nothing and drew nothing,
while `shell.sheet` still pointed at it and `menuOpen: !!shell.sheet` kept the day swipe
blocked until something else closed it. The row rides along now, both ways, and with no row
to go back to the sheet closes rather than opening one that resolves to nothing.
**"End the day here" showed off for a day that already ends there, and switching it on
deleted that day end.** Two things close a day: the stop's own flag and a manual boundary
filed against it. The writer has always known about both; the phone switch read only the
flag, so the tap ran through the writer's boundary branch and cleared the boundary. The
question is asked once now, in the planner beside that writer, and the desktop reads the
same answer it always computed inline.
**The road trip chain printed 24-hour clocks at a reader on a twelve-hour one.** The model
hands clocks over as HH:MM, which is what the schedule computes in, and the chain, the head
card and the up-next card printed it straight. The desktop rail, the day timeline and this
tab's own sheets all honour the setting; these go through the same formatter, carried in the
row chrome so no two rows can disagree.
**The up-next card's navigate button read "places.navigate".** No locale has that key. It is
`inspector.navigation`, which is what the stop sheet beside it, the place inspector and the
place sheet all use, with the single-target label when there is only one.
**Offered roads were invisible on a satellite basemap.** The imagery is anchored under the
first layer TREK draws, found by prefix, and the roads offered for a leg are added before
the route source so they sit under the current route. That also puts them before the first
`trip-` layer, so the raster went straight over them. The prefix list knows them now.
**A journal grew a day section for every day Dawarich recorded, all year.** The hook reads
every open stay the account has, and the timeline took all of their dates. A week in May
therefore sprouted sections from September. Bounded by the journal's own span now, its
entries together with the dates of the trips it links, and with no span at all it offers
nothing rather than everything.
SonarCloud's S2871 fires on a bare .sort() over strings and asks for localeCompare, and it
had five of them on new code, which is what put new reliability at D and failed the gate.
All five sort ISO dates or query parameter names, where the default lexicographic order is
exactly the one wanted. Taking the rule's suggestion literally would have been the wrong
fix twice over: a locale-aware comparison reorders dates differently per runtime, and on
the Amap signature it would produce a canonical string Amap itself does not compute, so
every signed request would come back rejected.
So the comparator is written out rather than changed. Byte order, explicitly, with a line
saying why it has to stay byte order. Behaviour is identical: the 43 Amap cases, the 40
track cases and the 30 client cases over these modules all pass unchanged.
Three things the CI would have caught.
The settings dialog's switches are the shared ToggleSwitch now, which is a button with
aria-pressed rather than a role="switch" with aria-checked, and three tests still looked
for the old shape.
The page's wiring test mocks the whole hook, so the day map the timeline reads was
undefined there and every case in the file died on it. The mock carries it now, empty,
because the fold has a suite of its own.
That suite is new: what it pins is the fold rather than the rows inside it, which the
panel's own tests already cover end to end. That it says nothing on a quiet day, that the
line reads shut, that the count takes the singular at one, that it starts closed, that
both actions reach the journal with the stay they belong to, and that the span follows
the traveller's own clock.
The grouping the hook does moved into the model beside the other pure shaping, where it
is four cheap tests instead of a round trip through MSW: by day, in the order they were
lived, only what is still waiting, and no bucket at all for a day whose stays are all
handled.
Capping it was the wrong half of the fix: the stays were reachable but the panel was cut
off at half the rail, which is not what opening something means.
It sits inside the places list's own scroller now, above the rows, so it simply grows to
whatever the day's stays need — 3350px for forty of them — and the rail scrolls past it
to the places. No second scrollbar, no fold. As a band of its own it could never do that:
the list is the flex child that scrolls, so anything unbounded above it squeezed the list
to nothing and took the rail's scrolling with it.
The panel sat in a wrapper that could not shrink and did not scroll, so opening it took
whatever height the day's stays needed — forty of them is over 3000px — and squeezed the
places list, which is the flex child that scrolls, down to nothing. The rail stopped
scrolling and most of the stays sat below the bottom edge with no way to reach them.
The wrapper is capped at half the rail and scrolls on its own. Open, the stays are all
reachable and the list underneath is still a list; shut, nothing changes, because the cap
only bites once the content passes it.
A stay in the trip rail showed both when it happened and how long it lasted. The rail is
narrow and the row does not wrap, and of the two it is the arrival that places a stop; how
long somebody stood there is a second figure competing for the same line.
Off wherever the panel is scoped to a trip, which is the planner rail and the phone's
places browser, and the same test `showTrip` already uses. The journal keeps it: there a
stay becomes an entry, and how long it lasted is part of what the entry says.
Every time Dawarich shows was cut straight out of the timestamp and printed, so on a
12-hour setting the app said "2:05 PM" everywhere and "14:05" here. Both ends of a range
go through the same formatter the rest of the app uses now, and the argument is
required rather than optional so the next caller answers the question instead of
inheriting the default.
That covers the rows in the panel, on the phone and in the planner, and the summary line
a journal day carries, which reads its span through the very same function so the fold
and the stays under it cannot disagree about the clock.
The accept dialog was already right: it fills a CustomTimePicker, which knows the
setting, from the 24-hour value it keeps internally.
A day a pending stay was waiting on now joins the timeline so the stay can be reached,
and the header counted those days as part of the journey: a journal of seven days read
"11 days" because Dawarich had recorded on four more. The figure comes off the entries
again, which is what the word means.
The stays Dawarich recorded used to be a panel above the timeline: every open stay of
every day, stacked over the entries. A fortnight of driving puts forty of them between
the reader and their own first entry, which is the scrolling Roel described on the
16th. They belong where the day is.
Each day of the timeline now ends in one line: the Dawarich mark, how many stays, and
the span they cover. A tap opens them, and what opens is the panel's own rows, imported
rather than copied — one row this detailed in two places would be two things to keep in
step and a straight hit on the duplication budget. Nothing is drawn on a day with
nothing pending.
A stay falls on the day it happened, which is often a day the journal has no entry on
yet, and that is the whole point of offering it. Those days join the timeline so their
stays can be reached at all; without that the only way to a quiet day's stays would be
to write an entry on it first. Not while a search is running, where a day whose entries
the query filtered out is not a day the reader is looking at.
The count takes two keys picked by the number, the shape this codebase already uses for
a noun that changes with it: there is no plural engine in the i18n layer, and one key
with a placeholder in it reads as "1 stays". Russian, Polish, Czech, Ukrainian and
Arabic inflect again at 2-4 and 5+, which two forms cannot express, so their plural puts
the number after a colon, where no form has to agree with it.
The phone is untouched: it opens the same list in a sheet from its own button, which is
where it works on a screen that shows one entry at a time.
Maurice