A new Nest domain plans the legs of a ski and winter tour on the runs,
lifts, cross-country trails, ski touring and winter paths the Places host
builds from OpenStreetMap, one SGR1 graph per ski area. TREK fetches the
index once, downloads an area by its id when a planner first plans in it,
checks it against the index's SHA-256 and keeps it in data/ski; no
clicked point ever leaves the server. A leg whose area is slower than two
seconds answers loading, and an older copy stands in while the host is
down.
The reader decodes the writer's golden file byte for byte, including the
two edge flags it added (area_has_run, type_unknown). The search is A* in
a worker thread over a profile per discipline (alpine, snowboard,
cross-country by technique, touring, snowshoe, winter hike) with the
times and penalties of the cost model, up to five snap candidates per
point, lift stations as entry points, legs that go on from each other,
pieces of a split network stitched by their boundary nodes, other ways by
the penalty method, and a failed leg explained by relaxing one rule at a
time (difficulty, lift class, technique, riding down, uphill) without ever
handing out the relaxed line.
POST /api/trips/:tripId/ski/route, GET .../ski/area-near and
GET .../ski/network/:areaId sit behind Tours and the trip, with
plan_ski_route as their MCP twin. A daily job looks for a new build and
sweeps areas unused for 90 days. The admin switch ski_routing_enabled is
on wherever TREK Places is.
The ways and routes layers now count failures on a breaker of their own, so
busy or slow layer answers no longer send place search to the fallback for a
minute, and a layer's 404 no longer clears the count of search failures.
When a later batch of /v1/ways fails, the batches that answered are kept and
only the ids still open go to the Overpass mirrors.
The wiki, the compose file and the chart now say that the way ids of a planned
tour and the horse routes box go to the TREK Places API.
The trail grades under a tour (BIK-05, MAP-03, MAP-04, RUN-02) and the
horse routes around a map view (HOR-01) asked the public Overpass mirrors.
The places host now serves both from its own planet build: GET /v1/ways
for the tags of ways by id and GET /v1/routes for route relations per box,
each in Overpass element form.
trek-places.client gains trekPlacesWays (batches of 500, one after
another) and trekPlacesRoutes, both through getJson with its off switch,
breaker, timeout, size cap and instance header, each element validated on
its own. TrekPlacesLayersService in the maps domain hands their answers to
the tours services, or why there is none (switched off, layer not built,
failed), and logs that once per layer until it answers again. Both tours
services ask the layer first and fall back to the existing Overpass path;
the responses TREK sends its clients are unchanged.
The winter label and four-discipline migrations are already on
feat/tours-board-rest, so a database that ran them would refuse to boot
or fail the old CHECK. 045500, 045520 and 046100 are back as they
shipped, and a new migration drops both winter_activity columns and
adds ski_discipline again with the six disciplines. The entity and
table types follow the column to its new place.
German, Hungarian, Indonesian and English no longer name the whole type
with the ski touring word, and the info dot speaks of ski tours and
tracks. search_tour_pois and its wiki row list rides and ski and winter
tours. Snowshoeing gets a snowshoe glyph instead of the walk's
footprints, a ski import without a discipline can be planned over (the
planner asks for it), and an overlay shown by default tries its tiles
afresh each time it comes on.
Ski becomes "Ski & winter", a type the planner plans with six disciplines
(alpine, snowboard, cross-country, ski touring, snowshoeing, winter hiking),
nothing preselected; saving needs a discipline, and a technique for
cross-country. Every leg is drawn straight between the points through
planner/skiRouting.ts, the one place the piste router will plug in, with its
heights from the elevation source and no ski time worked out.
The hike's winter label goes entirely: its migration, column, field, marks,
GPX rule, MCP field and strings. A hike is summer only; a ski tour with the
snowshoe discipline exports as snowshoeing. The unreleased ski migration takes
the six disciplines and the collection migration loses the winter column.
The pistes are offered for a ski tour, shown until switched off, and with no
tour open, never for a hike. Export, copy, collections, stages (untimed),
actual tracks, the atlas, list and day marks (one glyph per discipline), 3D,
planning over a ski import and list_tours/get_tour_plan know the planned ski
tour.
Settings, Integrations, wanderer gains an optional background check of the
trails you imported, off until you switch it on. While on, TREK reads the
short record of each such trail at most once a day (never its GPX file) and
leaves a hint when the trail may have moved on: "may have changed" when only
wanderer's change time moved, "changed" when its name or description proves
it, and "not checkable" when the trail is gone, no longer yours or carries no
change time. Nothing is ever said to be unchanged. A new hint arrives as a
notification that opens the tour (a new ?place= link in the planner); the
tour's provenance shows it with the source check right beside it, and the
card lists all open hints in a dialog, each leading to its tour. The check
reads the source in full as before and spends the hint; taking a change in
stays the confirmed reimport. No tour is ever changed or deleted.
The check only asks through your own connection, only about trails your
account imported into trips you can still open, and stops when you switch it
off, remove the connection, wanderer refuses the token (until a test passes
or a new token is saved) or the admin switches wanderer off; hints and
snapshots stay. A run asks at most 25 connections for at most 10 records
each, one after another, and an instance that fails (an outage, a rate
limit) is left alone for an hour, doubling up to two days.
Server: migration 046120 adds the switch and the run bookkeeping to
wanderer_connections and the tour_source_hints table (one row per snapshot,
for its importer, gone with it). WandererWatchService and an hourly
wanderer-watch job on the CronRegistrar live in the tours domain and read
through WandererService; GET and PUT /api/integrations/wanderer/watch and GET
/api/trips/:tripId/tours/wanderer/sources/:placeId/hint (place_edit, like the
check) answer with @trek/shared contracts. A new user notification event,
wanderer_source_hint, can be muted per channel. Saving a new token now clears
what the last check said about the old one. There is no MCP tool, as for the
rest of the personal wanderer connection. All 27 locales carry the strings,
and the admin wiki page says what the check does.
A tour can now point at the packing list of its trip, as a whole or at one
of its categories (say "Hiking gear" for a hike), and shows it in its detail.
The new Packing list section reads the list live as the user may see it: the
backpack tile with the item count on its corner and the category's own
colour, how many are packed with a thin progress bar, the first items ticked
off or not with their quantity, how many more there are, and a button that
opens the trip's Lists tab. Who may change the tour links one, changes it or
lets go through a dialog that lists the whole list and every category with
its colour and item count, and writes only on its confirm.
It is a reference, never a copy: the items stay in Packing, are ticked off
and edited there, and each traveller sees in the tour only the items Packing
shows them, so an item kept to oneself never shows through a tour. A
category that is renamed, cleared or only holds items of others reads as
missing, an empty one as empty, a link that could not be read says so with a
retry, and while Lists are switched off the link stays, dimmed, and can
still be let go. Removing the link, or the tour, leaves the list and every
item as they are. Nothing suggests or changes an item by itself.
On the server the link is a row of its own in the tours domain
(tour_packing_links, migration 046110), one per tour and gone with it.
GET, PUT and DELETE /api/trips/:tripId/tours/:placeId/packing-link read it
with the trip and change it with place_edit; linking needs the Lists addon
and, for a category, an item of it the user can see. The writes answer the
tour with its link and tell the trip through tours:changed, so the offline
client queues them as writes of the tour and replays them like one. A copied
trip keeps its tours' links, a tour saved as new or taken over does not.
The MCP tools get_tour_packing, link_tour_packing and unlink_tour_packing run
over the same service and checks; the read also hands the tour's facts as
context for suggesting what to pack, which only becomes an item through the
packing tools. The empty category placeholder now lives in @trek/shared so
both sides leave it out alike. All 27 locales carry the new strings, and
the wiki describes the link and the tools.
A saved tour can now be kept in a collection, apart from any trip, and
later made into a tour of another trip. The bookmark button in a tour's
footer and in the planner's head (waiting for the save while there are
unsaved changes) opens a dialog with every list of the user; a list they
may only read stays in it, dimmed with a lock and a tooltip. The list
keeps an independent copy: the line, the type, every measure and setting,
the waypoints in order with their roles, the origin, and the trip and tour
it was saved from as they were called then. Its days, its links to places
of the trip and its obstacle decisions stay in the trip, and later changes
to the tour do not reach the copy.
A collection shows its kept tours as cards above its places: the grade
tile with the source badge, measures and the waypoint count as badges,
the trip it came from, and who kept it. The owner or an admin of the list
can remove one after a question; tours made from it stay. "Add to a trip"
shows the kept tour on a map with its facts and numbered waypoints, lists
the user's trips (the ones they may not add tours to dimmed), and asks
outright whether the waypoints come along. "Line only" keeps the line as
saved and adds no waypoints; a tour kept without a line can only bring
them. The new tour has an id of its own, no days and no new places, and
names the trip and tour it was saved from; the dialog then offers to open
that trip. Neither the collection nor the original tour changes.
On the server the kept tours are a table of their own in the tours domain
(collection_tours, migration 046100), each row written whole once. Every
copy, the in-trip "save as new tour", the take-over from another trip and
both directions here, now goes through one copy model (tour-copy.helpers)
instead of a second one. Reading and removing follow the collection's
roles, keeping one also needs access to the source trip, and taking one
over needs place_edit on the target trip; the kept tour is read again
inside the write, so one removed meanwhile leaves no half-made tour. The
MCP tools list_collection_tours, get_collection_tour,
save_tour_to_collection, take_over_collection_tour and
delete_collection_tour run over the same service and checks. All 27
locales carry the new strings, and the wiki describes the flow.
A hut-to-hut hike or a paddle trip over several days is now planned in the
Tours planner as one tour: the whole route is planned as before, and stops
along it are marked as stage ends (MDT-01). The stages are read off that one
route in its order, never kept as copies, so a change inside a stage changes
the whole tour and every figure on it.
- A Day tour / Multi-day tour switch beside the tour type; a stop's menu
ends a stage there or lets it go on. Back to a day tour removes every stage
end after a confirmation, as one step undo brings back.
- The list of points is headed per stage with its distance and moving time;
a stop that ends a stage carries a moon at its number, on the map too.
- The overview lists the stages from stop to stop with distance, climb,
descent and time (hiking rule per stage, paddle estimate per stage, the
router's time shared by distance otherwise), marks where each ends across
the elevation profile, and a stage of more than a day on the move warns.
- A stage end a change cannot keep (its stop removed, moved to an end or
made a shaping point) is dropped and said so, with undo, never moved
to another point.
- A multi-day tour may take a day a stage, so its time limit grows with its
stages; the tour keeps its one type, portages included.
- The list and the MCP tools show the stage count and where stages end.
Stage ends are a flag on the waypoint (migration 046000); a tour without one
is a day tour, as every tour saved before.
A day of a tour that names nobody now counts for every member of the trip,
not only for its owner. In the planner an empty participant list means
everyone, and a full member list is stored back as empty, so members got
nothing for most shared tours. Only a day that names participants without
the user stays theirs. The tours of a shared trip on no day or only on
undated days are now named as not counting for members as well.
A whole route a multi-day tour's stages were planned from is no longer
dropped on the server as soon as any stage has a day. Each entry carries
derived_from_place_id and the shared summary leaves the route out only
while one of its stages is done, counted and in the period and type. A
route walked last year now still counts when a stage of it is planned for
next month or was left out because it fell through, in the Atlas and over
MCP alike.
A tour on several days is dated on the last of them, as is a recording on
no day, so it no longer counts while it is still under way.
The info text, the get_tour_activity_stats description and the wiki say so.
With the Tours addon on, the Atlas panel gets a third tab, Tours, beside
Stats and Bucket List: what you have done on your tours across all your
trips. A period (all time, this year, the last 12 months or an earlier year)
and a tour type narrow it; the tab shows the distance large with the number
of tours at its corner, the ascent and descent, and the types with their
distance. "Show tours" opens every tour of the period in a dialog with the
same filters, the sums, the split by type and one row per tour.
What counts is said, never guessed. A tour counts once the day it is on is
over, with the values of the planning, badged "Planned" and explained as
not measured. A linked actual track (ACT-01) replaces those values for its
execution, badged "Recorded" and named, and is never added on top nor
counted as a tour of its own. A tour on several days counts once, a whole
route does not count beside the stages planned from it, a paddle tour sums
no heights, and a value nobody knows stays out of the sum, which then reads
"at least". Only the user's own part counts: a day names them among its
participants, or names nobody on a trip of their own; being able to open
somebody else's trip makes none of its tours theirs. Tours still ahead, on
no day or only on undated days are named as not counting. A tour that fell
through can be left out of the sums ("Leave out"): it stays in the plan
and in the list, dimmed, and "Count again" brings it back. Only the user's
own numbers change.
Server: GET /api/tours/activity-stats answers the user's activity entries
across every trip they can open, and PUT /api/tours/activity-stats/exclusions
leaves a tour out or counts it again (the tour must be in such a trip, else
404). A tour_activity_exclusions table keeps the exclusions per user and
tour. The sums are added up by a shared summary in @trek/shared, so the
Atlas and the assistant say the same numbers. MCP: get_tour_activity_stats
and set_tour_activity_excluded over the same service. The tab reads live
and needs a connection, like the rest of the Atlas statistics.
A planned tour can now be given the track it was actually done with. In the
tour's detail, "Add actual track" opens a dialog that asks for the day the
tour was done on (or none) and a recording of the trip: an import nobody
planned over, or a new one through the existing GPX import, its preview
preset to the tour's type. What the choice measures is shown before anything
is written, and only "Link" writes. The linked track keeps its own name and
source; the detail shows its distance, heights, profile and, only where the
file carried time stamps, the time it took, marked as actual values next to
the untouched plan. A track can be changed or unlinked again.
Server: a tour_activities table points a tour's execution (a day assignment,
or none) at a recording of the same trip, and the tours GPX import keeps the
first and last time of a track whose every point carries one. The values are
read from the recording's own line on every read, so a changed recording
updates them while the plan's line, measures and revision stay as they were.
Every check runs inside the write: the recording must be an import of this
trip not planned over, documenting no other tour; the day must be one of this
tour; a refusal names its reason and changes nothing. PUT and DELETE
/api/trips/:tripId/tours/:placeId/activities answer the detail, which now
carries the actual tracks; the list names them per tour and per recording.
MCP: assign_tour_track and unassign_tour_track over the same service and
checks, get_tour_plan reads the values without the line.
A recording linked as a tour's actual track is no longer counted as a tour of
its own in the trip's tour summary, and the GPX preview imports a city walk
as one instead of as a hike.
A save refused by the rules of the tour now says "Nothing was saved and
nothing changed." instead of the preparation's wording: lay() takes what
the changes are laid for, and refusalText() leads with that action.
A save sent again after it committed (a retry after a lost answer) used
to meet the conflict of a tour that moved on, which tells the assistant
to prepare the change anew, so an add could be saved twice. The save now
looks up the step its proposal was saved as from the revision it was
prepared on, before the stale check and once more inside the write, and
answers already_saved with that step instead, writing nothing.
An assistant can now take back a change it saved with save_tour_change,
the way the change was saved: listed, shown, then taken back only after
the traveller said yes. Until now a saved step could be followed but not
undone; the traveller had to rebuild the walk by hand in the planner.
- list_tour_change_steps lists the steps of a tour, the latest first, with
the changes as confirmed and where each stands: latest, undone, later
change on top or no readable earlier state. Planner saves are no steps.
- prepare_tour_undo shows what taking a step back does without writing
anything: the tour now, with the stations visited or skipped, set
against the tour exactly as the step kept it, the stations kept, coming
back and removed, and the distance and walking time stored then.
- undo_tour_change restores that tour whole or not at all, through the
write the planner's save uses: line, stations with their keys and the
measures stored then, in one transaction with the mark on the step, and
the trip is told after the commit. It needs place editing on the trip
and checks everything again inside the write.
- Only the tour's latest change goes back. A step something was saved on
top of since, in the planner or by another step, is a conflict on the
tour's one revision (no second one), so no later edit is lost unseen; a
preview read at another revision is a conflict too. Taking back a step
that would remove a station visited or skipped since, or bring back a
station whose place of the trip is gone, is refused with every reason,
and so is a step without a readable earlier state. Every refusal and
failure leaves the tour as it is.
- A step is taken back once: tour_change_steps records the revision that
raised the tour to, who confirmed it and when, and nothing else is kept.
- None of it touches a planner draft: the planner's own undo stays in the
browser, and discarding a draft never changes a saved tour. The tool
descriptions and the wiki say so.
The write of a tour's line and points and the tour as the answer gives it
now come from one place for the save and the undo.
An assistant can now save the change prepare_tour_change prepared, once the
traveller said yes to it exactly as shown. Until now a proposal could only
be looked at; the traveller had to redo it by hand in the planner.
- The save names the proposal: the same changes, the revision it was
prepared on, the proposal_id the preparation answered and confirmed true.
Anything else, a change altered on the way or no yes, is refused and
nothing is saved.
- Place editing on the trip and the tour are checked again before anything
is written. A tour changed since the proposal was prepared is a conflict
on the tour's one revision (no second one), telling the assistant to
prepare the change anew instead of writing over newer edits. The changes
are laid on the saved tour once more inside the write, so a station
visited or skipped meanwhile, or a place of the trip gone, refuses the
save with every reason.
- The change goes through the write the planner's save uses, in one
transaction: line, stations, keys, measures and visits together or not at
all, and the trip is told only after the commit. Stations kept keep their
keys and visits. Where the router gives no way on foot the walk keeps its
stations only and waits for the planner, as a created one does.
- Every save is kept as a step of the tour (tour_change_steps): the
proposal, the revision it was prepared on and the one it raised the tour
to, the changes and the tour as it was before them, so the step can be
followed and taken back later. Nothing of the conversation is kept.
- A new walk has no revision to name and stays with create_city_walk; both
tool descriptions and the wiki say which is which.
A prepared change to a city walk took a station out or put one in without
touching the shaping points around it. The way after the change was then
routed through points steering legs that no longer exist, so the walking
effects showed a detour that is not real, and the points handed on for a
save could start or end on a shaping point.
- A shaping point belongs to the leg it steers. Removing, replacing or
moving a station drops the shaping points of its legs in and out, and a
stop put after a station drops those of the leg it splits. Shaping points
of other legs stay. The answer names every dropped one in data_gaps
(shaping_dropped), and the walk always starts and ends on a station.
- The closing leg of a loop counts as the leg into its first station. A
closing leg drawn by hand now refuses a change to the first station and a
stop after the last one, instead of quietly moving the end of a leg drawn
in the planner. The hand-drawn check also covers every sub-leg between two
stations, not only the one next to the station.
- for_later leaves out a new station already linked to a place of the trip,
so following it no longer creates a second copy of that place.
An assistant can now prepare a change to a saved city walk and show the
traveller what it would do before anything is saved. Preparing writes
nothing: no tour, station, visit or day plan changes, and turning the
proposal down keeps the plan as it was.
- The changes apply in order and name the saved stations by their keys:
add a station after another (a spontaneous stop is an add after the
station the traveller is at), remove, replace and move. Stops put after
the same station keep the order they were given in.
- What the travellers did stays as it is: a station visited or skipped on
any day of the walk is never removed, replaced or moved, nothing goes
before the last station already done, a protected station keeps its
place and a leg drawn by hand stays as drawn. A proposal breaking a rule
is refused whole, naming every change and why. Other tour types, and a
walk that is a recorded track, are refused too: so far only a city walk
takes prepared changes, since the others plan their way with routing of
their own the server cannot run.
- The answer sets the walk after the change against the saved one: each
station with what changed it and where it stood, what was removed, the
way on foot before and after planned by the same router (the stored
distance and walking time given apart, never mixed in), the stays as far
as known, every leg with the new ones marked, the gaps that could not be
worked out, a warning for a must station removed or replaced, and each
new station as create_place takes it, to keep it for later as a place of
the trip instead.
- The proposal names the revision it was prepared on, so a save of it is
refused once the tour has moved on, and says whether the traveller may
change the trip's places at all.
The way on foot of a new walk, its creation and a prepared change now come
from one CityWalkFootWayService instead of a copy in the briefing service.
An import without control points of its own answers the two ends of its
recorded track as its points, and the one leg between them was labelled
routed, as if the router had planned it. The assistant read a false fact.
Such a leg now says track, and the tool description and the wiki explain
the kind.
An assistant reading a tour over MCP now gets everything the saved plan
holds, from the same reads the app uses, so its suggestions start from the
actual plan:
- legs lists every step from one control point to the next with how its
line came to be (routed, via ferrata, drawn by hand, portage), keyed by
the points' stable keys, and the length of a fixed leg's own line; a
routed leg has no length stored apart and says so with null.
- line gives the saved line in brief: its point count, whether it carries
heights, and a preview thinned to 200 points; null while the way waits
to be planned.
- A city walk can be read for one of its days (dayId): each station then
carries its visit status that day and run what is still open. Without a
day no visit is told, so one day's ticks are never passed off as the
walk's; dayId on another type or a day the walk is not on is refused.
- derived names every field worked out on reading rather than stored,
including the control points an import without its own answers from the
ends of its track.
Reading still writes nothing: no revision moves and no visit changes, and
drafts in a browser stay invisible. The wiki row of the tool says the same.
A tour can now be a ride (HOR-01). The planner offers "Horse ride" as a
tour type with its own horseshoe, and a Horse routes card beside the
waypoints looks, when asked, for the route=horse relations OpenStreetMap
knows in the map view. A route opens in a dialog that shows it on a map in
the sections it is made of, split at forks, gaps and crossings, so nothing
is ever joined across a gap. The rider picks a section and its direction,
sees what the horse=* tags along it say (open, limited, closed, or unknown
where untagged) and whether it is signposted the other way, and takes it as
one undoable step. A section that does not start where the ride ends is
only joined by a straight manual stretch once the rider switched that on.
Nothing of a ride is routed: every leg follows a section or is drawn by
hand, and the waypoint list and the map say which (a section as a solid
line with its route, a manual stretch dashed and marked unchecked). A point
at a section stays where the route has it, a ride works out no riding time,
and distance, heights, day assignment, GPX import and export, the 3D view
and the reversed ride keep working with each leg's origin saved and opened
again. A failed lookup leaves the ride and the routes already found as they
were.
The server reads the routes through the shared Overpass client
(GET /api/trips/:tripId/tours/horse-routes, Tours addon, trip access),
keeps an answer twelve hours per grid-aligned view, and the tour contract
refuses a routed leg, a via ferrata or a riding time on a ride and a horse
route section on any other type. A migration enables the horse tour type.
SKI-02. Ski joins the types a GPX file can be imported as, offered in the
import preview's type field only: TREK routes no ski track, so the planner
never offers it. The preview asks for the discipline on purpose (alpine,
snowboard, cross-country or ski touring, none chosen at first) and, for
cross-country, the technique (classic, skating or unknown); Import waits
until both are named, and the technique stays in sight but dimmed for the
other disciplines. The track is stored exactly as recorded, with its file
name as provenance, its distance and heights from the file and no time:
no ski time is worked out and no hiking estimate stands in for one.
Opened in the planner, a ski track gets a rail card with its discipline on
a tinted tile, a cross-country technique as a badge beside it, the ski time
said as not worked out, and an info dot on what TREK does not say (snow,
avalanches, open runs, and that the 3D gradient colours are no difficulty
or avalanche rating). Change opens a dialog to classify the track again;
only the classification changes, through the offline core, with the
revision it was made at. Planning over the import is not offered for ski.
The existing 3D terrain view, the elevation profile and its focus work on
the track as for any import, with the standard map, topo and satellite and
no via ferratas. Lists, the day plan and the detail show the discipline as
a frosted corner badge on the tile and as a pill with the technique inside;
day assignment, copies and take-overs work as for any tour. The corner
badge is now one component that the winter label shares.
The server keeps tours.ski_discipline and tours.ski_technique (CHECK lists,
NULL on every other type), switches the ski type on without a routing
profile, refuses a ski import without its discipline, a technique outside
cross-country and ski fields on any other type, and takes a planned save's
classification off. PUT /api/trips/:tripId/tours/:placeId/ski classifies a
ski track again (place_edit, 409 on a stale revision, 400 for a tour that
is no ski track) and broadcasts tours:changed. GPX export names the
discipline (alpine_skiing, snowboarding, cross_country_skiing,
backcountry_skiing), and list_tours describes both fields with what a ski
track does not say. Ski is labelled plainly as Ski in every language, so
it no longer reads as ski touring.
HIK-01. The details of the hiking planner gain an optional Winter activity
switch, off by default, so the normal hiking flow asks for nothing more.
Switched on, the hike is a winter hike or a snowshoe hike; the choice stays
dimmed and out of reach while the switch is off. The label is saved with the
tour, comes back when it is opened, survives a draft reload, a copy and a
take-over, and switching it off takes only the label away: the route, its
grade and the days stay as they were.
The label is a label only. Routing, the walking time and the 3D terrain view
work as for any hike, and the info dot and the head pill's tooltip say that
nothing was checked for snow, avalanches or whether a path can be walked in
winter. The saved label shows as a frosted snowflake on the corner of the
tour's tile in the tour list and the day plan, and as a pill beside the type
in the tour's detail.
The server keeps it in tours.winter_activity (CHECK list, NULL for every tour
saved before and for every other type), refuses it on a bike tour, a city walk
and a paddle tour, and keeps the stored label when an older client saves a
hike without the field. A snowshoe hike exports to GPX as snowshoeing.
list_tours names the field, with the same words on what it does not say.
A search for sights along a tour now also asks the places index for the best
known places near the line, ranked by how often their Wikipedia articles are
read (QRank). A row the index already found is marked as a highlight; a
famous sight no kind names, like a square, is added as a sight of its own.
Stations, hotels and restaurants rank a row they match but are never added.
Highlights are listed first with a star in the list and a badge in the map
card. A place counts as a highlight from 40000 views a year, or the best
three from 5000 where fewer reach that. An index without ranks, or one older
than the endpoint, leaves the search as it was.
An assistant connected over MCP can now prepare a city walk from what the
traveller tells it. propose_city_walk takes a start (and an end), a time
frame on a day of the trip, the themes of CW-05, the stations the
traveller wishes for, the places of the trip it may use and fixed
appointments with their times, and saves nothing. Places for the themes
come from the search along a tour, at most eight, each with the theme,
category and source that brought it; nothing is made up. The stations are
ordered on estimates over the straight distance, and a place of a theme or
of the trip goes in only where it is open on arrival, keeps the frame and
the appointments, and leaves every station already on the walk open when
the walk gets there. The walk in that order is then planned on foot by the
router the road trip uses (the traveller's own routing server where they
set one), and its legs give the walking distance and time from one station
to the next. Where the router cannot be reached, or a station lies more
than 300 m off every way (the planner's limit, now shared with the
server), the times are estimates over the straight distance with an
allowance for streets at 4.5 km/h, and the answer says so and why. The
answer gives the arrival and leave times, the stay where the traveller
gave it and unknown otherwise, which makes every later arrival the
earliest one, and the opening hours checked against the arrival on that
day with the helpers the planner uses. Walking and stays are counted
apart, the total is complete only when every stay is known, and the
minutes the frame leaves for the unknown stays are named. Free time before
an appointment or at the end, wishes and appointments that cannot be kept
as asked, and places left out with their reason are listed; a tour of the
trip offered as a station is named as a tour. A wish or an appointment is
never dropped; an appointment is a must and protected. A place's default
duration is not read as a stay: every place carries one, so it says
nothing.
Once the traveller confirms, create_city_walk saves the walk through the
same creation the planner's save uses: one write, a key for every station,
the links to the trip's places checked, the trip told, with place editing
permission on the trip. Its way on foot is planned by the same router and
saved with the walk, together with its distance and walking time. Where
the router gives no way, the walk is saved with its stations only and the
answer says why: no line, no distance and no walking time. The tours list
says so (route_pending), the tour detail says in one line that the way is
planned in the planner, and opening the walk in the planner plans its way
at once and offers to save it, with a note once it is planned that it was
just planned. Such a walk can be saved as a new tour and taken over into
another trip, starting at its first stop, and is never offered as a place
to stay. A tour without a line needs two points of its own.
get_tour_plan now spells out every field of a city walk's stations: key,
name, stay (null when not known), importance (null for normal), protection
(false when not set) and opening hours (null when none are known);
list_tours names the station count and whether a walk waits for its way,
get_city_walk_progress gives each station's key and opening hours, and
take_over_tour says a walk keeps its stations with their protection. No
tool changes a walk's stations; deleting a walk's place takes its stations
along, protected ones included, and both delete tools now ask the
assistant to name those and ask the traveller first. REST answers the
stations as before.
A tour create refused for a type that is switched off, a description that
is too long or planned times out of range is a domain refusal now, so an
assistant gets the same text REST sends; REST still answers it as an error
at 400.
"Add tour" in the planner now offers "Import walk from Google Maps". The
dialog takes the link of a route shared in Google Maps, either a
maps.app.goo.gl short link or the long google.com/maps/dir link, or the
share text of the Google Maps app with the one link in it. It shows the
stops in their order with their names, marks a stop the link gives no
position as such, says that the route comes from Google Maps with a link to
open it there, and that TREK plans the way between the stops itself and
does not take the line drawn in Google Maps over. Nothing is written until
"Load as walk": that opens a new, unsaved city walk in the planner with the
positioned stops and their names, routed on foot by TREK, and warns first
when it replaces unsaved work. A stop without a position is left out and
never looked up or guessed; with fewer than two positions nothing can be
loaded. While the walk is not saved, a calm notice in the planner says
where it came from, also after a reload of the draft. Cancelling or a
failure leaves every tour as it was.
Only a route the link marks unambiguously as on foot is read. A car, bike
or transit route, a link that does not say, or one that says two things is
refused with a reason the dialog gives in the reader's language. Each stop
takes its position from its own block of the link's data, so a line
dragged through extra points or a stop given as coordinates no longer
leaves the stops without positions or shifts them. The road trip and
places imports read links as before.
A short link is followed by a resolver of its own: every hop is checked
against the Google Maps short link shapes and the strict SSRF guard before
it is looked up or asked, so ALLOW_INTERNAL_NETWORK and
ALLOW_LINK_LOCAL_IPS do not open it. Each request goes to the vetted
addresses only, follows nothing by itself, reads no body and carries no
credentials; the chain has one deadline including name lookups, at most
three hops and a cap on the Location header, and the long link it ends on
must be Google Maps and is never fetched. The preview is POST
/api/trips/:tripId/tours/import/google-maps/preview for members who may
edit places, with a 502 when Google could not be reached, and the MCP tool
preview_google_maps_walk reads the same.
The day row on the phone now shows how many stops of a city walk were
visited on that day, "2 of 5 visited", like the desktop row does. Both rows
read it from one place, and a tap on the phone names it in full without
opening the row.
A walk's stops can be checked off, skipped and taken back without a
connection. The mark shows at once, waits in the offline queue and goes out
when the connection is back, in the order the marks were made and behind any
older mark of the same day that still waits. The day plan, the walk's detail
and a reload read the visits kept on this device with the waiting marks on
top, so a mark made offline stays on screen until the server has it. A mark
the server answers with "not found", because the stop, the day or the walk
was removed meanwhile, counts as done and holds back no later mark of that
day. Any other refusal, the Tours addon turned off among them, keeps the mark
as a failed change to try again from the offline settings. The visits are
read again when the connection comes and goes, and once more after the
waiting marks went out, so a mark the server dropped or refused leaves the
day plan. A trip's visits that answer after another trip was opened no longer
show there.
The offline sync keeps each trip's walk visits and reads the stops of a walk
this device has never opened, so it can be checked off offline too. A walk
whose stops this device could not read lists no stand-in stops and no count,
and says to open it again while online. A walk put on a day while offline
says its stops can be checked off once it has synced, instead of offering
buttons that cannot work yet. A mark that fails says to open the walk again
and try once more, in every language.
Marks carry no version, so the last one to reach the server wins, as with
the other changes sent after being offline. The offline guide says so.
The search along a tour found nothing. It asked the places index for all
kinds of a stretch at once, above the 100 rows and 200 characters of terms
the index takes, so the index refused and every stretch went to the public
Overpass mirrors, which do not answer from this server. Now the index is
asked in small circles strung along the line, one request per kind and
circle within its limits, and an empty circle counts as an answer, so a
city walk lists its sights, museums, parks, cafes, restaurants and markets
in well under a second. The kinds the index does not know (viewpoints,
huts, drinking water, toilets and the like) are asked of Overpass along the
whole line at the same time, one query per stretch of up to 50 km, three at
a time, each with a short deadline of its own; a line past 400 km is
searched along its start and says so. When the index answers no circle at
all, its kinds go to Overpass beside the others instead of after them. A
kind no source could be searched for is named in a calm notice above the
list instead of reporting nothing found, and the reason is written to the
log. Unnamed taps, toilets, shelters, picnic spots, viewpoints, summits,
slipways and repair stands stay in the list and on the map under the name
of their kind; an unnamed garden, cafe or memorial is left out. The places
nearest the line are kept when there are more than sixty, listed from the
start, with the opening hours the source has.
A walk's parks are parks and gardens only, and its museums are museums
and galleries only, no longer the beaches, summits, theatres and cinemas of
the map's explore buttons; a water park the index files under parks is not
one of them. The index also answers markets and summits. The explore
buttons keep their single request, and a search of several kinds that
would exceed the index limits is asked one kind at a time instead of being
refused. The MCP tool search_tour_pois and its wiki row describe the walk
kinds and the new unavailable list, and the OVERPASS_TIMEOUT_MS row says
the search along a tour keeps its own shorter deadline.
The list at the top of test.yml now names every step group its jobs hold,
the contributing guide names the parity job as it is called now, and
db-mock.ts says test-db reaches the auth controller only when a rate limit
is reset.
The test jobs waited for the quality jobs (~9 min) and the client suite ran
on one runner (20-35 min), so a run took 45-60 min before ci-ok answered.
Every test job now starts right after changes. The client suite runs in
eight slices and the server suite in six, each with coverage into a blob
report; client-coverage and server-coverage merge the blobs, check the
thresholds against the whole and upload the lcov the scan reads. The scan
needs the gates directly, so a failed gate still stops it.
POST /api/trips/:tripId/tours/poi-search looks for what a hike or a paddle
tour stops for along a line: viewpoints, peaks, shelters, drinking water,
food, toilets, picnic spots, campsites and sights, and on the water
slipways and boat rental. The line comes in the body, so a draft not yet
saved can be searched, thinned to at most 1000 points; the corridor is
50 m to 2 km wide.
The line is cut into stretches as the road trip's corridor search does,
each searched through the map search (the TREK places index first,
OpenStreetMap after), three at a time; a long line is searched along its
first twelve stretches and the answer says so (capped). The places kept
lie within the corridor of the line itself, each once, nearest the start
first, up to 60, each with its source, kind, address, website, phone and
opening hours as the source has them, its distance straight across to the
line (distance_m, never called a detour) and how far along it lies. A
stretch that fails leaves the others' places and marks the answer partial;
a cut answer is truncated. Nothing is written. It is a read, so anyone who
sees the trip may ask.
The map search's OSM filters gain those outdoor categories; the explore
pill does not offer them. MCP: search_tour_pois, along a saved tour's line.
GET /api/tours/library lists the tours of every trip the user owns or is a
member of, with the trip each is in and how many tours each trip holds, to
choose one to take over into the trip being planned. It is narrowed by a
part of the name (matched ignoring case, a "%" or "_" just a character), a
type or one trip, and the asking trip can be left out; up to 100 tours, and
the answer says when there were more. GET /api/tours/library/:placeId
previews one: its facts and its line thinned to 400 points, its ends kept.
Neither is trip-scoped, so every answer is bounded by the user's own trips,
read anew each call: a tour of a trip out of reach is "not found", nothing
hints that it exists. Measures stay null where the tour has none.
POST /api/trips/:tripId/tours/take-over copies one into this trip, which the
guard checks with 'place_edit'; the source trip is checked against the
user's trips as they are at that moment, and the source is read again inside
the write. The copy is a tour of its own: its line, measures, settings and
control points, without days, without its stops' links to places of the
other trip and without the obstacle decisions taken there; it keeps the
import record of its line. A copy that fails leaves nothing behind.
Where it came from is kept as text (tours.taken_over_from_trip_title and
taken_over_from_tour_name, migration 045100), not as a pointer, and read
back in the provenance as takenOverFrom; a copy of such a copy names it too.
The in-trip copy (P2C-07) and the take-over share one copy routine.
MCP: list_tour_library and take_over_tour, over the same service and
checks. The repository tests follow the hiking preferences column of MF-08.
A hike can ask the router for more than its difficulty limit: avoid steps,
avoid ferries, prefer footpaths, shorter over faster. They sit under the
limit in the planner's details as switches, each with what it really does,
and the info dot says they weigh the way and give way where there is no
other, and that none grades a path. Switching one plans the route again as
one step of the history, and the choice is kept in the draft.
Only preferences the public Valhalla was seen to honour are offered, with
the measured cases beside hikingCostingOptions: step_penalty took Würzburg
to the Festung from four flights to one, use_ferry 0 sent Kiel round the
Förde and Hamburg through the Elbe tunnel, walkway_factor moved Garmisch to
the Partnachklamm onto the paths, shortest cut the way to the Eckbauer.
use_hills and use_tracks showed no effect on foot and are left out, as are
marked, paved and rough ways, for which the router has no option.
tours.hiking_preferences (migration 045000) holds them as JSON, NULL for
none, so no tour saved before routes differently. Only a hike keeps them;
a paddle tour naming one is refused. A copy carries them, and list_tours
and get_tour_plan read them.
The trip copy's waypoint links now follow the copied places inside
TourWaypointsRepository.insertForPlace.
A saved tour now has a technical revision, raised inside the transaction of
every write that changes it: the route and its controls, the plan laid onto a
recorded paddle track, going back to that track. A write that names the
revision it was based on (expected_revision) is refused with a 409
{ code: 'tour_revision_conflict', revision } before anything of it is
written, so a stale draft never overwrites a newer tour unseen. A write that
names none writes as before, so older clients and queued offline writes keep
working; the queue never carries a base. A copy starts at 1, a source's
version stays provenance. Migration 044800 adds the column; list_tours and
get_tour_plan read it.
The editor follows the trip's tours live: a newer revision of the open tour
loads at once while the editor has no changes of its own, and shows a notice
while it has. A refused save keeps the draft and asks: save it as a new tour,
load the newer version, or overwrite on purpose.
useTourPlanner was at the size limit; its derived facts, undo history and
draft storage move into tourPlannerFacts, usePlannerHistory and
useTourDraftStorage, unchanged in behaviour.
A saved tour can be handed over as a GPX file on purpose: its whole saved
line as one track with the heights it has and none it lacks, its name,
description and link, and the activity in <type>. The file is named after
the tour. A tour without a line of two points is refused with 422 rather
than written as a file that imports as nothing; the export changes nothing.
GET /api/trips/:tripId/tours/:placeId/export.gpx, readable by anyone who
sees the trip, and the MCP tool export_tour_gpx with the same rules. The
tour detail gets a "GPX" action beside the navigation, the planner head a
download button that waits while the tour has unsaved changes.
The tours rail head now uses the same plain icon buttons as the editor.
Paddle tours are planned on the water by TREK's own router: a water network
per paddle region, built from the same Geofabrik extract as the obstacles and
searched in a worker thread of the server (no sidecar). Rivers, canals and
lakes (direct or along the shore), portages round weirs, locks by policy,
whitewater by boat, gaps marked. Found portages and locks become points of
their own; an unplannable leg says why and offers a way out.
- Shaping points: a click on the line sets a point that steers the route
without being a stop (hikes and paddle tours); recompute a single leg.
- Lake style direct/shore, suggested from the wind forecast.
- Regions load by themselves where a paddler plans (admin setting: automatic,
on request, off; size cap and a daily count), with requests for the admins,
a notification, and the load followed on the leg.
- Portage from the last point, portages follow footways via the walking
router (or stay straight), "put in here" on slipways and put-ins.
- MCP plan_paddle_route with the REST route's rules.
The OpenAI-compatible client always asked for 4096 tokens, and a document
whose bookings needed more came back as "no reservations" with nothing that
pointed at the cap. LLM_MAX_OUTPUT_TOKENS now sets the cap for every
provider; unset keeps 4096 and 8192 so a small local model's context still
fits. A finish_reason of "length" is reported like Anthropic's max_tokens
stop, naming the limit and the variable that raises it.
Closes#2677
How an admin adds a region from Geofabrik's list, what the card shows while it is read, the monthly refresh on the 3rd, what a failed read keeps, and the OpenStreetMap attribution under the ODbL; a record in the data is no check on site.
- Paddle as a plannable tour type: one boat (kayak, canoe, SUP, other), river or
lake, a pace that a boat change never overwrites; time is distance over pace
- Hand-drawn legs beside routed ones, drawn dotted and labelled as not routed,
kept through save, reopen and edits elsewhere
- Reverse a tour and close it back to its start, each one undo step
- GPX import shows a preview first (line, measures, duplicates, type) and only
the confirmation stores the tour
- Base maps and overlays per tour type in the planner: hike keeps topo and the
via ferrata layer, paddle gets the OpenSeaMap seamark overlay
The column showed the last sign-in, which a renewing cookie leaves weeks
behind for someone using TREK daily. It now shows the later of the sign-in
and the last request. Saving an edit no longer blanks the row's avatar,
activity and online dot, and the list refreshes every 30 seconds while open.
Cloud models got the first 4,000 characters, so totals and lodging sections
further down never reached them, without a word. They now get 24,000 with the
start and the end kept and a warning when the middle is left out; a server
whose context is too small is asked once more with 8,000. A total the model
repeated on every flight of one booking stays on the first flight only, when
the document prints it once as a total, and the prompt says so too.
Journeys from the transit search are routing, not bookings, and a day of them
pushed the real bookings out of the six slots. Booked trains and buses keep
their own types and stay. The MCP tool reads the same feed.
The OIDC page explains when a login by email links an account, what
email_link_blocked means and how an admin lets a blocked account link by
entering its address in the admin panel. The audit log page lists
user.email_change.
A guest's payer rows and recorded payments hung on the users row by ON DELETE
CASCADE, so deleting the guest wiped money that had really moved: expenses
they paid were left without a payer, settled payments reopened, and a custom
or receipt split lost the guest's share so the balances no longer summed to
zero.
Deleting a guest who paid for an expense or is part of a recorded payment is
now refused with a 409 (REST and the delete_trip_guest MCP tool, same text),
and the share dialog says to change the payer or delete the payment first.
Otherwise the guest's share is handed on: an equal split re-splits as before,
a custom amount goes to the others by largest remainder in the currency's
smallest step (members without an amount get one, so the expense stays a
custom split), and a receipt drops the guest from its lines and is split
again like the cost editor does. A legacy paid_by_user_id is cleared as on
account deletion. Account deletion goes through the same re-split. The
confirmation text in all languages and the wiki say what really happens.
Refs #2604
The undo wrote a new place from nine of its fields and put it on its days as a
bare stop, so notes, website, phone, hours, picture, the visit times, day notes
and travellers were gone while the toast said it was undone. It now writes every
field the place had and plans each visit again with its times, note, end of day,
route flag, travellers and leg modes, and casts the own rating again.
The server takes a booked night, its booking and expense, linked expenses, file
links, other members' ratings and an uploaded picture down with the place, and
writing the place again brings none of that back. Such a delete is no longer
offered for undo. Undo steps that name a deleted place are dropped at the delete
instead of failing later, and adding a place, moving categories and the phone
reorder and optimize now carry their place ids for that.
Taking a stop off a day and clearing a day undo with the visit details too. The
stays are read again when a deleted place had one, here and for collaborators.
Refs #2604
API keys were split off from MCP to work without any addon, but the tab
that holds them still hid unless a photo provider, MCP, AirTrail, AI
Parsing or Dawarich was enabled. On a fresh install all of those are off,
so there was no way to create a key. The desktop tab now always shows;
the addon backed sections inside it keep their own gates. The phone layout
has no API Keys section and keeps its gate.
The wiki now says where keys are created and that no addon is needed.
Refs #2561
Marking a region wrote its country with source 'manual', the same as ticking
the country off by hand, and removing the last region then took the country
away whatever its origin, Dawarich confirmations included. A country that
only comes in through a region is now stored as 'region', marking it visited
afterwards turns it into the user's own mark, and the cascade in unmarkRegion
only runs for a country without such a mark. Readers still see 'manual' for
those rows, so the country detail, the MCP resource and the plugin RPC answer
as before. Rows written before this change stay 'manual' and keep their
country.
REST, MCP and plugin RPC share the service. The atlas popup on desktop and
phone now asks the server whether the country is still marked before it
drops it from the map instead of guessing.
Refs #2597
NODE_ENV="production " passed the boot check but matched none of the
exact production comparisons, so the web UI was never served and every
page answered {"error":"Cannot GET /"}, while the banner showed a clean
"production". The boot import now trims these three variables in
process.env before anything else reads them, so Express, the plugin
children and readEnv() agree, and reports each change as a process
warning. Casing stays as it was. A padded "test" is only reported, so an
instance cannot switch to an in-memory database after an update. The
banner prints NODE_ENV as set instead of lowercasing it.
Refs #2565
Maurice