Ski becomes "Ski & winter", a type the planner plans with six disciplines
(alpine, snowboard, cross-country, ski touring, snowshoeing, winter hiking),
nothing preselected; saving needs a discipline, and a technique for
cross-country. Every leg is drawn straight between the points through
planner/skiRouting.ts, the one place the piste router will plug in, with its
heights from the elevation source and no ski time worked out.
The hike's winter label goes entirely: its migration, column, field, marks,
GPX rule, MCP field and strings. A hike is summer only; a ski tour with the
snowshoe discipline exports as snowshoeing. The unreleased ski migration takes
the six disciplines and the collection migration loses the winter column.
The pistes are offered for a ski tour, shown until switched off, and with no
tour open, never for a hike. Export, copy, collections, stages (untimed),
actual tracks, the atlas, list and day marks (one glyph per discipline), 3D,
planning over a ski import and list_tours/get_tour_plan know the planned ski
tour.
The server's src and tests together are past 570,000 lines and the test
typecheck needs about 4.3 GB, over Node's default heap; it now gets 8 GB like
the test jobs. Forty new client files are formatted, and the react-hooks/refs
baseline drops by the one warning a split hook removed.
Which places are tours, their planned times and where their stages run
travel together to the desktop and the phone day plan. useTripPlannerPage
now puts them together as dayPlanTours, and the page passes that bundle
instead of naming the three props at both places.
The day route plan and the day plan sidebar both built the map of a day's
stops projected onto their tours, each stage on its own stretch, by hand.
projectedById in dayTourProjection builds it for both, and the sidebar's
drive runs reuse the route plan's point type instead of spelling it out
twice.
reportGlViewport says what a GL map shows, its bounds and its zoom on the
raster tile scale, and has its own test for that scale. MapViewGL only
wires it to moveend and idle, and its test checks that wiring. The GL map
tests put the zoom back to its default before each test, as they do for
every other value a test overrides, instead of each test restoring it.
The hike's limit and preferences, the bike profile and the run profile were
four states with four refs kept in step by hand in every handler that set
them. useRoutingChoices holds them as one value with one ref, so a history
step, an undo, a new draft and an opened tour each lay them in with one
call, and useTourPlanner is back under the size limit.
The map focus helpers split out of useTripPlannerPage returned object
literals ahead of the hook's own return, which the B4A wiring test reads as
the view model. They move to tourMapFocus.ts beside the hook.
Clears the client lint ratchet: helpers move to sibling .ts files for react-refresh, complex render paths get small helpers, floating promises are voided, the stage rail lets a stale request go during render, and the collections page reads the active list's tours and rights in ActiveCollectionTours. StageNumber is no longer exported.
The type order puts run before kayak, the import button reads Import GPX or KML, and the mocks gain what the components now read: routeRun, packing items and links, the map's zoom, the translation provider and the compare store's map flag.
The activity section used Footprints without importing it. Opening one stop's menu now closes any other. lostStageEnds no longer counts a stop the change kept without its mark as lost twice over. The wanderer watch switch keeps the same tree once the connection is known, so it is not remounted and keeps its focus.
Ski has been an importable type since SKI-02, yet a ski tour's recording
still opened in the GPX preview as a hike. It now opens as ski with the
tour's discipline, and its technique for cross-country. The run profile
fallback and the ride preset get their tests.
The three round hike strings passed formatted distances as {min} and
{max}, and {max} is a quantity param, so i18n parity read them as count
strings outside a plural group and failed. The bounds are now {from} and
{to} in every locale and in the card.
Two reads of the same collection, after two changes by other members or
the first read overlapping one, could answer in either order and an older
list replace a newer one. A refused removal also restored the list from
before it, dropping changes read meanwhile; it now only puts its own tour
back.
Each exclusion replaced the whole list with its answer, so two quick
exclusions answered in the other order, or a read answered after an
exclusion landed, put back a tour as counted although the server held it
excluded. Only the answer to the latest request is now taken whole, with
the exclusions still on their way laid over it; an older answer only
confirms its own tour.
Linking or unlinking a recorded track went out even in offline mode and
behind a queued write of the same tour, and its answer replaced the whole
cached tour with the server's older state, losing the local change. Both
now refuse as online only in those cases and for a tour the server has
not got, the view says so, and the answer only updates the cached
tour's recordings.
The pace was always min/km and the run's time sum forced kilometres, so
with distances in miles the run card disagreed with every other figure in
the planner. The pace is still kept per km, but is typed, shown and
checked per mile when distances are in miles, and the time sum reads in
that unit too.
The collection copy keeps the winter, run, ski, bike and stage columns,
but its list item only carried the older fields, so a kept ski track lost
its discipline mark, a snowshoe hike its winter mark, a run its pace and
a multi-day tour its stage count. The item now carries them, and a kept
tour's card shows the pace and the stages beside its measures.
Footprints stood for a snowshoe hike, an actual track and a walk's moving
time at once, with the snowshoe pill and the track pill side by side in a
tour's head. An actual track now goes by the done mark on the list row,
in the head and on a recording's tile, and a winter tile's corner takes
the icon its head pill shows.
The stage count sat in the row's fixed-height line of badges, so a tour
with stages and a recorded track wrapped and lost its days badge. The
count now sits on the fold button, a moon with the number at its corner,
or beside the row where it does not unfold, and the days come before the
measures so the ascent is what gets cut.
A run described its ways in a card of its own, with the bike's sections,
the bike's paint for the SAC grades (T5 and T6 merged) and its own words,
so the same path read differently on a hike and on a run. The run now
uses the hike's card, matched as a run, and keeps only the unpaved share
and the hardest grade in its head. The run's grade labels and the now
unused SAC paint go.
A multi-day run's stages took a share of the foot router's time while the
run itself is timed at the runner's pace, so the stages did not add up to
the run. A ride has no time at all, so its stages have none either.
Types, test expectations and helpers the seven tracks each changed on their
own, brought in line with the integrated code. tours.service.ts and the tours
repository grew past the size limit with every track and hand their row and
write helpers to modules of their own.
The watch row only re-read its state when the connection came or went, so after
a passing connection test or a newly saved token it kept saying "Token refused"
until a reload. The connection card now hands it a key built from the saved
connection and its last check, and the row re-reads the watch whenever that
changes.
Without a connection the switch was only dimmed: the button stayed in the tab
order and was announced as active. ToggleSwitch gains a disabled prop that
disables the button and marks it aria-disabled, and the reason stays reachable
through a focusable wrapper carrying the tooltip.
Settings, Integrations, wanderer gains an optional background check of the
trails you imported, off until you switch it on. While on, TREK reads the
short record of each such trail at most once a day (never its GPX file) and
leaves a hint when the trail may have moved on: "may have changed" when only
wanderer's change time moved, "changed" when its name or description proves
it, and "not checkable" when the trail is gone, no longer yours or carries no
change time. Nothing is ever said to be unchanged. A new hint arrives as a
notification that opens the tour (a new ?place= link in the planner); the
tour's provenance shows it with the source check right beside it, and the
card lists all open hints in a dialog, each leading to its tour. The check
reads the source in full as before and spends the hint; taking a change in
stays the confirmed reimport. No tour is ever changed or deleted.
The check only asks through your own connection, only about trails your
account imported into trips you can still open, and stops when you switch it
off, remove the connection, wanderer refuses the token (until a test passes
or a new token is saved) or the admin switches wanderer off; hints and
snapshots stay. A run asks at most 25 connections for at most 10 records
each, one after another, and an instance that fails (an outage, a rate
limit) is left alone for an hour, doubling up to two days.
Server: migration 046120 adds the switch and the run bookkeeping to
wanderer_connections and the tour_source_hints table (one row per snapshot,
for its importer, gone with it). WandererWatchService and an hourly
wanderer-watch job on the CronRegistrar live in the tours domain and read
through WandererService; GET and PUT /api/integrations/wanderer/watch and GET
/api/trips/:tripId/tours/wanderer/sources/:placeId/hint (place_edit, like the
check) answer with @trek/shared contracts. A new user notification event,
wanderer_source_hint, can be muted per channel. Saving a new token now clears
what the last check said about the old one. There is no MCP tool, as for the
rest of the personal wanderer connection. All 27 locales carry the strings,
and the admin wiki page says what the check does.
"Open packing list" switched to the Lists tab but left it on whichever
sub-tab was open last, so someone who had been in the to-dos landed there.
It now picks the packing side first, and a Lists tab already on screen
follows the choice; storage that is blocked no longer throws either.
With the Packing addon off, "Remove link" let go of the link on one click,
and the link cannot be made again until Packing is back on. It now opens
the tour's packing dialog with only the dimmed link and the Remove link and
Cancel buttons, so nothing changes without a second, deliberate click.
A tour can now point at the packing list of its trip, as a whole or at one
of its categories (say "Hiking gear" for a hike), and shows it in its detail.
The new Packing list section reads the list live as the user may see it: the
backpack tile with the item count on its corner and the category's own
colour, how many are packed with a thin progress bar, the first items ticked
off or not with their quantity, how many more there are, and a button that
opens the trip's Lists tab. Who may change the tour links one, changes it or
lets go through a dialog that lists the whole list and every category with
its colour and item count, and writes only on its confirm.
It is a reference, never a copy: the items stay in Packing, are ticked off
and edited there, and each traveller sees in the tour only the items Packing
shows them, so an item kept to oneself never shows through a tour. A
category that is renamed, cleared or only holds items of others reads as
missing, an empty one as empty, a link that could not be read says so with a
retry, and while Lists are switched off the link stays, dimmed, and can
still be let go. Removing the link, or the tour, leaves the list and every
item as they are. Nothing suggests or changes an item by itself.
On the server the link is a row of its own in the tours domain
(tour_packing_links, migration 046110), one per tour and gone with it.
GET, PUT and DELETE /api/trips/:tripId/tours/:placeId/packing-link read it
with the trip and change it with place_edit; linking needs the Lists addon
and, for a category, an item of it the user can see. The writes answer the
tour with its link and tell the trip through tours:changed, so the offline
client queues them as writes of the tour and replays them like one. A copied
trip keeps its tours' links, a tour saved as new or taken over does not.
The MCP tools get_tour_packing, link_tour_packing and unlink_tour_packing run
over the same service and checks; the read also hands the tour's facts as
context for suggesting what to pack, which only becomes an item through the
packing tools. The empty category placeholder now lives in @trek/shared so
both sides leave it out alike. All 27 locales carry the new strings, and
the wiki describes the link and the tools.
Taking a tour kept in a collection into a trip left the user guessing in
two places when the tour had no line. The map box stayed an empty grey
square that read as a broken map; it now says that there is no line yet,
only the waypoints. Why "Line only" is dimmed was only in the tooltip of a
disabled button, which never shows on hover, focus or touch; the reason now
stands under the two choices, and a disabled tile sits in a span so its
tooltip can show as well.
A successful take-over said the same sentence twice, as a toast and as the
dialog's last word with "Open trip". The toast is gone.
The collection strings move out of tours.ts into a tourCollection.ts per
locale, keeping their keys, so no locale's tours file grows past the
1000-line limit. The tours locale spec now holds both files to their own
counts.
A saved tour can now be kept in a collection, apart from any trip, and
later made into a tour of another trip. The bookmark button in a tour's
footer and in the planner's head (waiting for the save while there are
unsaved changes) opens a dialog with every list of the user; a list they
may only read stays in it, dimmed with a lock and a tooltip. The list
keeps an independent copy: the line, the type, every measure and setting,
the waypoints in order with their roles, the origin, and the trip and tour
it was saved from as they were called then. Its days, its links to places
of the trip and its obstacle decisions stay in the trip, and later changes
to the tour do not reach the copy.
A collection shows its kept tours as cards above its places: the grade
tile with the source badge, measures and the waypoint count as badges,
the trip it came from, and who kept it. The owner or an admin of the list
can remove one after a question; tours made from it stay. "Add to a trip"
shows the kept tour on a map with its facts and numbered waypoints, lists
the user's trips (the ones they may not add tours to dimmed), and asks
outright whether the waypoints come along. "Line only" keeps the line as
saved and adds no waypoints; a tour kept without a line can only bring
them. The new tour has an id of its own, no days and no new places, and
names the trip and tour it was saved from; the dialog then offers to open
that trip. Neither the collection nor the original tour changes.
On the server the kept tours are a table of their own in the tours domain
(collection_tours, migration 046100), each row written whole once. Every
copy, the in-trip "save as new tour", the take-over from another trip and
both directions here, now goes through one copy model (tour-copy.helpers)
instead of a second one. Reading and removing follow the collection's
roles, keeping one also needs access to the source trip, and taking one
over needs place_edit on the target trip; the kept tour is read again
inside the write, so one removed meanwhile leaves no half-made tour. The
MCP tools list_collection_tours, get_collection_tour,
save_tour_to_collection, take_over_collection_tour and
delete_collection_tour run over the same service and checks. All 27
locales carry the new strings, and the wiki describes the flow.
A route planned in Google My Maps or Google Earth can now become a tour
without converting it to GPX first. The import button and a file dropped on
the tours workspace take .kml and .kmz files beside .gpx, through the same
preview, the same import routes and the same transaction as a GPX file.
The preview shows every line of the file on its own, numbered, with its
distance and heights; two lines of one placemark are numbered after its name
and never joined. Heights count only where they are heights: kept for an
absolute line, dropped for any other altitude mode and for the all-zero
placeholder My Maps writes, so a missing height stays unknown. What the file
holds besides its lines (pins, areas, overlays, links to other files) is
counted in a dashed card, and nothing is fetched from elsewhere.
The KML reading reuses the place import's codec. A KMZ only ever has its KML
entry unpacked, counted byte by byte against the decompressed cap whatever
its header claims. A file that cannot be read is refused with its reason
(damaged, an archive without KML, too large unpacked), and the toast names
the file and the reason. A KML or KMZ import keeps the gpx origin of a file
import; its provenance names the real format from the stored file name.
Two review findings of MDT-02 in the planner's list and the day plan:
- A stage asked for while the draft has unsaved changes stayed pending when
the changes were kept or the tour failed to open, so opening that tour
later from its row jumped to a stage nobody asked for then. The rail now
has cancel(), which the discard question calls when it is dismissed and
the open calls when it fails, and it lets a stage go once the opened
tour's points are in and none of its stages starts at that stop.
- Every day holding a stage of a tour read the whole tour on its own, so a
five stage tour sent five identical requests on top of the list's own.
tourPointsRepo shares one read per trip, tour and revision among the
views showing it at the same time, through the tour repo as before, and
drops it once the last view lets go or the read fails.
A multi-day tour in the planner's list of the trip's tours now unfolds into
its stages (MDT-02), so the stages can be seen together and fitted into the
trip without leaving the one route they are cut from.
- The fold beside a multi-day tour lists its stages in route order, each
from stop to stop with its distance, climb, descent and moving time, read
off the saved tour the way the planner reads them, and below them what the
whole tour adds up to. A value no stage tells is left out, a total some
stages do not tell is marked as at least that much and says for how many,
and a stage whose route is not planned yet says so.
- Each stage has its own day: a pill opens the trip's days, moves the stage
to another one or takes it off again. A stage without a day shows a dashed
"No day" pill. A day holds a tour, or one of its stages, once, and a stage
is on one day at most; the plan's own offline path writes it.
- A stage opens in the planner: the tour opens as any tour does and the
stage is shown once its points are in.
- The day plan names the stage a day holds with its own figures, and the
day's route runs to that stage's start and on from its end; the trip map
draws that stretch only. The tour list still counts a tour once, however
many days hold it or its stages.
- A saved change that takes a stage away (its stage end gone, the tour a day
tour again, back to the recorded track) takes it off its day in the same
write and tells every client; the planner says so before the save.
- REST and the assign_place_to_day tool take the stage by the key of the
stop it starts at, with the same checks; list_tours names the stops
between the stages and the stage each day holds.
A day assignment remembers its stage by that key (migration 046010); every
assignment made before holds the whole tour, as it did.
A stage end set on a lock or portage point the water router placed left
the point automatic, so the router could drop it with its leg later,
silently and without an undo step. Ending a stage there now makes the
point the paddler's own, like any other edit of it.
The notice for stage ends a change could not keep also vanished as soon
as the router laid its points in again after the change. It now stays
until the next change the user makes, an undo or redo, a save, or
another draft.
A hut-to-hut hike or a paddle trip over several days is now planned in the
Tours planner as one tour: the whole route is planned as before, and stops
along it are marked as stage ends (MDT-01). The stages are read off that one
route in its order, never kept as copies, so a change inside a stage changes
the whole tour and every figure on it.
- A Day tour / Multi-day tour switch beside the tour type; a stop's menu
ends a stage there or lets it go on. Back to a day tour removes every stage
end after a confirmation, as one step undo brings back.
- The list of points is headed per stage with its distance and moving time;
a stop that ends a stage carries a moon at its number, on the map too.
- The overview lists the stages from stop to stop with distance, climb,
descent and time (hiking rule per stage, paddle estimate per stage, the
router's time shared by distance otherwise), marks where each ends across
the elevation profile, and a stage of more than a day on the move warns.
- A stage end a change cannot keep (its stop removed, moved to an end or
made a shaping point) is dropped and said so, with undo, never moved
to another point.
- A multi-day tour may take a day a stage, so its time limit grows with its
stages; the tour keeps its one type, portages included.
- The list and the MCP tools show the stage count and where stages end.
Stage ends are a flag on the waypoint (migration 046000); a tour without one
is a day tour, as every tour saved before.
A day of a tour that names nobody now counts for every member of the trip,
not only for its owner. In the planner an empty participant list means
everyone, and a full member list is stored back as empty, so members got
nothing for most shared tours. Only a day that names participants without
the user stays theirs. The tours of a shared trip on no day or only on
undated days are now named as not counting for members as well.
A whole route a multi-day tour's stages were planned from is no longer
dropped on the server as soon as any stage has a day. Each entry carries
derived_from_place_id and the shared summary leaves the route out only
while one of its stages is done, counted and in the period and type. A
route walked last year now still counts when a stage of it is planned for
next month or was left out because it fell through, in the Atlas and over
MCP alike.
A tour on several days is dated on the last of them, as is a recording on
no day, so it no longer counts while it is still under way.
The info text, the get_tour_activity_stats description and the wiki say so.
With the Tours addon on, the Atlas panel gets a third tab, Tours, beside
Stats and Bucket List: what you have done on your tours across all your
trips. A period (all time, this year, the last 12 months or an earlier year)
and a tour type narrow it; the tab shows the distance large with the number
of tours at its corner, the ascent and descent, and the types with their
distance. "Show tours" opens every tour of the period in a dialog with the
same filters, the sums, the split by type and one row per tour.
What counts is said, never guessed. A tour counts once the day it is on is
over, with the values of the planning, badged "Planned" and explained as
not measured. A linked actual track (ACT-01) replaces those values for its
execution, badged "Recorded" and named, and is never added on top nor
counted as a tour of its own. A tour on several days counts once, a whole
route does not count beside the stages planned from it, a paddle tour sums
no heights, and a value nobody knows stays out of the sum, which then reads
"at least". Only the user's own part counts: a day names them among its
participants, or names nobody on a trip of their own; being able to open
somebody else's trip makes none of its tours theirs. Tours still ahead, on
no day or only on undated days are named as not counting. A tour that fell
through can be left out of the sums ("Leave out"): it stays in the plan
and in the list, dimmed, and "Count again" brings it back. Only the user's
own numbers change.
Server: GET /api/tours/activity-stats answers the user's activity entries
across every trip they can open, and PUT /api/tours/activity-stats/exclusions
leaves a tour out or counts it again (the tour must be in such a trip, else
404). A tour_activity_exclusions table keeps the exclusions per user and
tour. The sums are added up by a shared summary in @trek/shared, so the
Atlas and the assistant say the same numbers. MCP: get_tour_activity_stats
and set_tour_activity_excluded over the same service. The tab reads live
and needs a connection, like the rest of the Atlas statistics.
The compare switch in a tour's detail showed whenever the detail sat beside
the plan map, but the map draws no comparison in road trip mode or with the
trip overview open. Pressing it there turned the switch on while nothing
appeared on the map.
The plan map now tells the compare store whether it can draw a comparison.
The detail offers the switch only then, and turning to the road trip or the
overview, or leaving the map, ends a running comparison.
Each actual track in a tour's detail now stands beside the plan instead of
on its own: a table names the plan and the actual track as columns, each with
the line it is drawn as on the map, and sets distance, ascent, descent and the
time with breaks side by side. The difference is shown, signed and with an
arrow, only where both values are known and mean the same thing; a planned
total that leaves a stay out reads "at least" and is not subtracted from. A
value one side does not carry is named as missing ("Not in the plan", "Not in
the track", "No time stamps"), never estimated. Below the table, how far the
track left the planned line: its farthest point and the recorded stretches
more than 50 m away, or that there is no line to compare.
On the desktop plan map, "Compare on map" draws the actual track dotted in
the colour of done next to the plan, which stays picked in its own track
colour (and is put back should it be hidden on the map). The recording leaves
the map as a tour of its own meanwhile, so it is never drawn twice or in a
plan's colour. A frosted legend over the map names both lines and ends the
comparison; so do closing the detail, comparing another track, or the track
being unlinked. Comparing only reads: neither the plan nor the track changes.
The track is laid into the day's route lines the map already draws, so both
renderers show it without a layer of their own. distancesToLine in the shared
route corridor measures many points against one line laid flat once; a long
recording is measured in at most 1500 samples.
A tour detail that cannot be read (offline without a cached copy, or a server
error) no longer shows "No actual track yet" while the trip list names tracks
of the tour; the section says they could not be loaded and offers no link over
them.
The day a track was recorded on is the viewer's calendar day of its first time
stamp, not the UTC one, in the tour detail, the link dialog and the GPX
preview alike, through one helper.
Taking a tour off a day keeps its actual track without a day, so "no day" can
hold several. A change now starts on the track it was asked for, and the link
dialog names every track it replaces, as the server clears all of them. The
migration, repository, service and MCP texts say so.
The refusal for linking a tour to itself or a track with tracks of its own now
reads "This track cannot be linked to this tour", which is true of both, and
the offline helper of the tour cache sits above the doc of replaceTripTours
again.
A planned tour can now be given the track it was actually done with. In the
tour's detail, "Add actual track" opens a dialog that asks for the day the
tour was done on (or none) and a recording of the trip: an import nobody
planned over, or a new one through the existing GPX import, its preview
preset to the tour's type. What the choice measures is shown before anything
is written, and only "Link" writes. The linked track keeps its own name and
source; the detail shows its distance, heights, profile and, only where the
file carried time stamps, the time it took, marked as actual values next to
the untouched plan. A track can be changed or unlinked again.
Server: a tour_activities table points a tour's execution (a day assignment,
or none) at a recording of the same trip, and the tours GPX import keeps the
first and last time of a track whose every point carries one. The values are
read from the recording's own line on every read, so a changed recording
updates them while the plan's line, measures and revision stay as they were.
Every check runs inside the write: the recording must be an import of this
trip not planned over, documenting no other tour; the day must be one of this
tour; a refusal names its reason and changes nothing. PUT and DELETE
/api/trips/:tripId/tours/:placeId/activities answer the detail, which now
carries the actual tracks; the list names them per tour and per recording.
MCP: assign_tour_track and unassign_tour_track over the same service and
checks, get_tour_plan reads the values without the line.
A recording linked as a tour's actual track is no longer counted as a tour of
its own in the trip's tour summary, and the GPX preview imports a city walk
as one instead of as a hike.
A way OpenStreetMap could not be asked about this time now carries a tooltip
saying so, and the unknown list offers to ask again whenever such a row is
there, not only when nothing at all was answered.
A hike can now be planned as a round out of one of its stops without
building the loop point by point. "Round hike from here" in a stop's menu,
or the round button in the head of the waypoints for the start, opens a
card over the planner map: the start (any stop of the tour, picked from a
list), the wished length in the traveller's unit, the window of a fifth
either way it allows, and the tour's hiking limit, which every question
to the router keeps to together with the hike's preferences.
TREK looks for up to three different rounds itself on the hiking router it
already uses. It steers loops round circles in several directions from the
start, asks a loop that missed the length once more at a corrected size,
and learns from each answer how much longer the paths are than straight
lines. A loop that walks most of its ground twice (a way there and back), a
spot too far from any path, and a round that repeats one found are left
out, and nothing outside the window is offered. The rounds show up in
their colours on the map and in 3D as they are found, the map frames the
area they can lie in, and each lists its length, how far it lies off the
wish, climb, descent and walking time once the heights are in. Fewer
rounds than three, none, or a router that does not answer are said so.
Showing, choosing and closing change nothing. "Take this round" puts the
start, the steering spots as shaping points and the way back in place of
the plan as one step of the history, with a "Round taken" note and its
undo; a tour that held more than its start asks first. The round is then
an ordinary tour to edit and save. A start moved or a limit changed while
rounds are shown lets them go and the card says why.
The card shares its frame, buttons and rows with the comparison of a
section's ways, and the map corner still holds one card at a time.
While the other ways of a hike's section were compared, a click on a via
ferrata or a place on the map opened its card in the same corner, stacked
over the comparison. The corner now holds one card: whichever opened last
stays and the other closes, before paint, so the two never show together.
The router's first answer between the two ends is its own way under the
hike's rules, which the tour already routes the section by. Offered as a
choice, taking it only planned the leg again, usually to the same line, and
the card closed without "Way taken" or an undo step. It is no longer
offered, so every way taken is held by shaping points, changes the route and
can be taken back in one step.
A routed section of a hike between two neighbouring points can now be
compared with the other ways the router knows between the same two points,
under the same limit and preferences. "Compare ways for the next leg" in a
waypoint's menu opens a card over the planner map: the way taken now and up
to three others, each drawn on the map in its own colour, with length,
climb, descent and walking time by the signposts' rule. Figures without
heights stay unknown, and the differences to the current way are shown
only where both are known. When the router knows no other way, or does not
answer, the card says so.
Showing, hovering and choosing change nothing. Only "Take this way" does:
the router is first asked whether a few shaping points hold the chosen way
(the check the road trip's picker already uses), and only then are they set
into that one leg as a single step of the history, with a "Way taken" note
and its undo at the foot of the map. Other legs, fixed lines, days and
points stay as they were, the totals follow from the replanned route, and
the shaping points can be dragged like any other. A section that changed
while the router was asked, or a way it does not keep to, is not written,
and the card says why. The ways are drawn in 3D too.
A long hike or mountain bike tour can run over more distinct ways than one
grade request may ask about. The ways past that cap were never asked, yet the
facets read them as carrying no surface, way type or grade in OpenStreetMap.
They now land under 'Could not be asked this time' with the unanswered ones.
The hike's "SAC grades" card becomes "Trail details": one switch, then a
segmented choice between SAC, Surface and Way type, three things kept
apart and drawn along the route on the planner map one at a time. Every
facet reads from the same answer: the ways under the line are matched on
foot once, their OpenStreetMap values fetched once through the
trail-grades read MAP-03 already uses, and each stretch is placed against
the tour's own line once. Switching facets asks nothing new.
The server now hands on a way's surface and highway tags as OpenStreetMap
wrote them, only trimmed and bounded. The planner groups them (asphalt or
concrete, paving stones, compacted, gravel, natural ground, grass, rock,
wood or metal, unpaved without a kind, other; path, footway, steps, farm
or forest track, cycle path, minor road, road, via ferrata, other), and
each row's tooltip names the values recorded, such as surface=gravel,
surface=pebblestone. The router's own surface reading is never used: it
is normalised and a default where nothing is recorded.
What is not known stays unknown and says why, in every facet: no value
recorded, a value no group takes or two at once (unclear, never the
nearest group), no way clearly under the tour's line, or a way that could
not be asked about. Imported tracks and hand-drawn stretches keep their
geometry; a matched way only counts where it keeps within 25 m of it.
A summary badge gives the known share and the most common class; the SAC
facet keeps its highest step and routing limit badges. Nothing about the
tour, its places or its days changes, and no routing preference is set.
A hike in the planner, being edited or viewed as an import, now has an
"SAC grades" card. Switched on, it asks the router which OpenStreetMap
ways lie under the line (matched on foot, every grade of path open) and
the server reads their sac_scale through the Overpass mirrors, the same
trail-grades read the mountain bike grades use. The grades are drawn
along the route on the planner map in one ramp of a single hue, T1 to
T6, and listed by share and length; a row draws its class alone. Each
row names its source in a tooltip: the SAC hiking scale and the
sac_scale value OpenStreetMap wrote.
What is not known stays unknown and says why, never T1: a way without
a grade, a grade that names no single step (handed on as written), a
stretch with no way clearly under the tour's line, or a way that could
not be asked about. For imported tracks and stretches drawn by hand a
matched way only counts where it keeps within 25 m of the tour's own
line, so the original line is kept and nothing is guessed. The router's
own reading of the scale is not asked for, since it may be normalised.
The routing limit of a planned hike sits apart as a setting with its
own badge, and a known step above it is marked. Nothing about the tour,
its places or its days changes; switched off, the map is as it was.
No regional colour categories and no grade derived from slope, height
or trail markings.
A ride recorded elsewhere comes in through the one Tours GPX import
(HOR-02): pick the file, choose Horse ride in the preview and confirm.
Once a ride is chosen, the preview says in three badges what the import
will and will not do for it: the line stays as the file recorded it, no
riding time is worked out, and nothing checks whether its ways may be
ridden. Each badge gives its reason in a tooltip, reachable by keyboard.
Nothing is stored before the confirmation.
Opened again, the ride's rail carries a Recorded ride card with the same
badges above its measures, and names heights the file did not carry
instead of showing them as zero. Its origin and file name stay in the
tour's provenance, it goes on a day like any tour, and no editable
version is planned from it on foot.
The import itself was already canonical and needed no change; end to end
tests now pin what this card promises: the stored line equals the
recorded points, the ride keeps its origin, distance and heights and has
no riding time, a file without heights keeps them unknown, a failed or
refused import leaves an existing ride and its place untouched, and the
same file twice is skipped.
A ride sends its full line with heights and every horse route section's
own line besides, about fifty bytes a point, so a ride along a few
thousand points of bridleway hit the API's 100kb body ceiling and the
save failed with a 413. Creating and editing a tour are now measured
against TOUR_WRITE_MAX_BYTES (2 MB), like the book and list file
routes; every other route, the tour copy among them, keeps 100kb.
The horse routes kept in memory are now bounded by section points as
well as by count (64 answers, 500k points), so panning a dense map can
no longer grow the server by hundreds of megabytes.
A search that found no connection can be asked again on the view whose
routes are shown, and a ride with a recorded time shows the horseshoe
beside its riding time instead of footprints.
Maurice