A visit's End could be edited and was shown in road trip mode, but the
schedule never read it: the drive always left a stop after its stay, so
a traveller who knew when they had to leave but not how long they would
stand there had no way to say so.
The End is now the time the drive leaves. RoadtripStop.leaveAt is
filled from the visit's End (or its place's) on the client by
useRoadtripRoutes and on the server by roadtrip-plan.service, so
calculate_roadtrip and get_roadtrip_context agree with the planner, and
computeSchedule takes it as the departure it already knew how to hold.
With Start and End both set the stay is the time between them. With
daily travel times on, the stay is the time until then, and an End
before the window start starts the day early the way a Start does.
Before the first fixed time the chain works backwards through an End as
it does through a pinned Start.
An End is read against the drive: the last passing of that clock time
counts as missed when the drive went past it on the road or earlier
the same day, anything else is the next one, so a drive across
midnight neither waits a whole day nor pretends to be on time. A drive
that gets there after the End leaves on arrival and files a
missedLeave finding, shown beside the late badge in the rail and on the
phone.
The rail's STAY badge, the inspector's Stay tile, the phone stop sheet
and the phone chain show the stay the End makes, with an "until 14:00"
hint. It is read off the schedule and never written to
duration_minutes: the stay belongs to the place, the End to one visit,
and a stored copy would go stale as soon as the arrival moved. For such
a stop the stay dialog, desktop and phone, shows that stay read only
and offers to remove the End, through the visit's time route with an
offline path (assignmentRepo.setTimes, setAssignmentTimes). While the
road trip is on, the End field in both place forms says the drive
leaves at that time.
The dead checkoutAt in the plan service is gone. New strings in all 23
locales.
The button carried nothing and the form hard-wired the kind, so the categories
sitting directly above it had no way through and every manual stop started life
as a fuel stop with ten minutes on it. The click now carries what the corridor
is looking for, dwell included. The picker is multi-select, so the first kind
the panel lists wins rather than a fallback nobody switched on; with nothing
selected the form falls back on its own, because a stop without a kind is a
numbered destination that counts in every total.
This also closes the case it was noticed on: an electric car seeds the panel to
charging, so the picker said Charging over a form that said Fuel.
One request per day is thrifty, and the price of it is that a refusal is never
local. With the usual cause gone the shape of the failure is still there, so a
run the router refuses outright now asks for its legs one at a time instead of
leaving the day blank. The pairs are enqueued rather than awaited, so they keep
the spacing of every other request, and a rate limit is never split: answering a
host that asked for less traffic with four more requests is the opposite of
backing off. A refusal the host meant skips the two retries, because the same
coordinates earn the same 400.
Seam legs are merged under the day's own runs now rather than over them.
legsByDay is replaced whole on every routing round while seamLegs only ever
grows, so a pair that used to sit on a day boundary and now sits inside one day
kept an answer nobody re-asks for, shaped by the vias of a stop that has moved.
**"Today" was read off UTC while the clock beside it is local.** `localDate.ts` exists for
exactly this and says so in its own comment: between local midnight and the UTC rollover the
two disagree, so east of Greenwich the up-next card hung on yesterday's stage for the first
hours of every night, which is when somebody on a long stage is actually driving. Both the
stage hook and the corridor hook now ask the same helper the rest of the app asks.
**A refused day end left the switch showing a state the trip never reached.** The writer
catches its own failures and shows a toast, so it never throws and the sheet's catch could
not fire, which left the optimistic value standing. It answers whether the day end moved
now, and the switch comes back when it did not. The desktop control ignores that answer, as
it reads its state back from the trip.
**A timed-out corridor search reported more unsearched boxes than it had.** Every worker
still alive ran the deadline branch and each added the whole remainder, so three workers
reported three times the boxes left, which can exceed the number of boxes there ever were.
The remainder is claimed before it is counted, which also ends the other workers' loops.
**A night that fell mid-leg had its morning drive dropped from the stage map.** The join
mark went on the first leg of every day opening on an automatic night, but only a night
standing ON a stop is a connection between two days. `dayWindow` records that difference as
a whole `position` against a fractional one, and where it is fractional the morning drive is
the last stretch to this day's own first stop. It was being filtered off the stage while its
distance stayed in the day's total.
The last change marked the drive into the next day and kept it off a phone stage, but it
only caught the connection `connectDays` builds through `inboundAt`. A trip with a day
window set never takes that path: the window switches `inboundAt` off and builds the days
itself, so day 2 opens on an automatic night standing where day 1 stopped and its first
leg is the drive on from there. That leg is the same connection, it just arrives as one
of day 2's own legs under day 2's number, and the stage drew the whole way back to
yesterday's last stop on today's map. The setting is not even involved: with a window it
happens either way.
So the leg out of an opening night is marked as a join as well, and the phone drops it
with the rest.
One exception, because the filter must not empty the screen: a day that is nothing but
driving, night to night with no stop of its own, has only the connection to show, and
there the line IS the day. When dropping the joins would leave a stage with no line at
all, it keeps them.
"Connect the days" is a whole-drive setting: with it on, the leg from one day's last
stop to the next day's first is drawn in the colour of the day it leaves, so the desktop
map reads as one continuous drive across every day. The phone has no such view by
default. It shows ONE day, and the stage filter went by day number alone, so that
connection came along: a line running off the day on screen to a place it never visits,
and on this trip the longest thing on the map by far.
The assembler now says which lines are connections (`lineJoins`, parallel to `lines` and
`lineDays`) rather than leaving each surface to guess, because the day number cannot tell
them apart: it reads the leaving day for both a day's own legs and for the drive out of
it. A stage drops them; the all-days view keeps them, which is the view the setting is
for and is one tap away on the same map, next to the day chips.
Routes read back from an older cache carry no marks, so nothing is known to be a join and
nothing is dropped: those days draw exactly as they did before.
`dayWindow.stationary()` puts a leg between the last stop of a day and the automatic
night that closes it: same coordinate at both ends, nothing measured, no texts. It is
bookkeeping, not a drive. Drawn as a pill under the last stop it said "No route" — and
before the template was guarded, a bare " in " — under a place the traveller had simply
arrived at.
Matched on the shape rather than on the next stop being a night, because what makes it
not a drive is that it goes nowhere: a day ended at a boundary dragged down the road HAS
a leg with a distance, and that one keeps its pill. A leg nothing has routed yet keeps
its row too, so it can still say it is pending.
The desk offers alternative routes from the drive band between two stops;
the phone had nothing. A leg in the phone chain now carries one round
button that asks the router for other ways and switches to the map, where a
bar takes the stage bar's place: the ways as chips with their colour, time,
distance and what sets them apart, and a confirm button. On glass there is
no hover, so a tap on a chip or on a line only previews that road; confirm
writes it. The button shows only where the desk offers it (a routed leg
between chosen stops), for someone who may edit the day, and not offline,
since vias are written online only.
The picker could not have stayed open on a phone at all: the planner closed
it whenever road trip mode was off, and that mode is off on a phone by
design, so the next render shut it. The close now follows where the picker
can be seen (road trip mode on the desk, the road trip tab on a phone), and
useRouteAlternatives returns a memoised object.
The rules both shells need are shared: legReroutable in the row model,
alternativesPhase and alternativeSubline next to the overlays, and the desk
bar and sidebar read them too with no visible change. Both map engines take
an optional fitPadding, so the phone frames the leg between the day chips
and the bar instead of under them.
The bar over the road trip map names a place, but a tap on it switched to
the whole day's chain and the place never opened. It now opens that stop's
sheet, the one its row in the chain opens. Its name, clock and tap come off
one row (stageEnd), so the bar no longer pairs the destination with the
automatic day end's clock (Kyoto Station 22:00 while the head card said
12:40). The header's list switch stays the way back to the chain.
A pin on the stage went through the plan tab's marker click, which moves
the place selection and brought up the plan tab's place card. On the road
trip tab a pin now opens its stop on the stage card, or the first routed
visit in the all days view, and only a place no routed day stops at still
gets the place card. The handler keeps one identity for the life of the
map. "Show on map" in the stop sheet and the up next card move the camera
through focusRoadtripPoint instead of the selection, picking the stop's
card first when it is not on screen. A pending focus now lets go once the
day moves, so later stages frame their own drive again.
Stage pins come from the trip store instead of the plan tab's map list.
That list carries the plan tab's day declutter and place filters, so after
the all days switch and back most pins of the next stage were missing, and
the unplanned filter or hidden service stops removed stops the chain draws.
"Tank runs out here" on the phone was a pink card with a black pill. It now
has the desktop band's design sized for a thumb: the mascot on its
skateboard and not enjoying it, a small uppercase warning, and the reserve
lamp as a 44px button. While a search runs or its offers show, the lamp
steps aside for a close (nothing in the band could clear the offer pins
before), and an empty answer leaves a retry.
Which control shows, which offers and which empty sentence is decided in
refuelBandState in refuelSuggestion.ts, next to the fuel and battery words.
The desktop RefuelBand reads the same helper now, with no visual change, so
the two shells hold markup only.
The head card read LEAVE 11:30 over a chain whose first stop is pinned at
10:00 with an hour and a half there. The figure was the departure from the
first stop, a clock no row prints, while ARRIVE was the last stop's arrival.
So the number was the wrong quantity and "Leave" the wrong word for it.
Both figures now come off the arrival column the rows print: START is the
first timed arrival (or the resume point on a morning after an automatic
night), ARRIVE is the last one. The rule lives in stageClocks in the shared
row model and reaches the tab as rt.clocks. The label is a new key,
mobileTrip.rtStart, because roadtrip.stay.leave keeps meaning a stop's own
departure in the stop and stay sheets. Both clocks carry dir=ltr like the
rows.
A road trip tab on the mobile trip screen: the stage as a chain, the same
map underneath it, the sheets a passenger needs, and a search along the
route.
The addon was desktop only because road trip MODE is a data switch rather
than a view switch. It rewrites `assignments` and `places` for the whole
planner hook, and every mobile sheet is permanently mounted and reads those
same two lists, so turning it on there brought back documented regressions.
The mode flag is therefore untouched. A second flag, `roadtripFeedActive`,
feeds only the routing round and does it off the STORED assignments, so the
phone gets the drive without what the mode drags along with it.
The map is one instance shared by the plan tab and the road trip tab,
hoisted into a single JSX expression so React keeps it in the same position
and the WebGL context is never torn down on a tab switch.
The corridor search is scoped to what a phone can afford: a window of the
day rather than all of it, a smaller tile ceiling, a capped retry pass and a
deadline. The standard search is three requests where the desk makes
fifteen. The categories are deliberately not narrowed, because they all ride
one query per box, so a second one costs nothing.
Two gaps found while wiring it up are closed here as well. The fuel search
drew its offers nowhere on the phone, so the button did nothing visible;
they are in the dry band now, with the detour, the spare range and an accept
button. And the map credit opened as a two line ribbon across a screen the
map fills: both GL engines now start it collapsed, and Leaflet, which has no
collapsed mode of its own, is given one.
The corridor searches the whole line a card draws, and a card that opens
with a drive from the day before (a night carried over, or the joined road
on connected days) draws that drive ahead of its first stop. The insert
index still came from insertIndexForAlong, which never answers 0, so a
charger found on that stretch was added after the first stop and the day
drove there, turned back to the charger and came the same way again.
insertIndexFor now answers 0 for a hit before the first stop when the card
arrives from an earlier stop, and dropping a hit on the map asks it instead
of computing its own index, so a click and a drop cannot disagree.
The dialog built for this last round was its own thing and showed it: the
suggestion list was barely legible, clipped at the bottom, and never more
than two rows tall. It also lacked most of what the ordinary add-place form
has had for years.
So it is gone, and "Add manually" opens that form instead, in a service-stop
mode. The category control becomes the kind of stop and the time spent
there, the costs section is dropped, and an "Add between" row says where on
the drive it goes. Everything else comes along rather than being rebuilt:
the typed-ahead search with its source marks, the coordinate fields for a
charger no index knows, address, website, phone, notes, times, files and the
duplicate check. With the mode absent the form is the same component it was,
which its own suites still pin.
Where the stop lands is worked out when it is saved rather than when the
form opens, because the coordinate only exists once a place has been chosen.
One function answers both what the select shows and where the stop goes, so
the two cannot disagree, and the write goes through the same assignment path
as every other insert, via re-anchoring included: a stop pushed into a day
shifts every via anchored at or after it, and without re-anchoring first the
drawn road runs forward, doubles back and runs out again.
The select recommends rather than merely offering. Every leg of every routed
day is measured against the place separately and they are listed nearest
first, each with its own distance, so the preselected one visibly is the
closest and overruling it is an informed choice. The word they all shared
moved into the caption.
A stop with no position at all is not filed on a drive by guesswork. It
keeps its kind and goes to the trip's places, and the form says so and says
how to change it.
The case asserts no availability counter is shown for an ambiguous station, and
looked for one with an unanchored /\d+\/\d+/. The attribution line beside it ends
in the source's updatedAt run through toLocaleString(), and tests/setup.ts only
forces en-US on toLocaleDateString, so that timestamp reads "14.9.2026" on a
German machine and "9/14/2026" on the CI runner. The regex matched the second
one. Green where it was written, red on Linux, and red for a reason that has
nothing to do with charging.
Anchored at the start instead. Both places that print a count begin with it, so
the case still says what it meant to say.
"Add manually" did not fit beside "Search" and rendered as "Add manu…",
which is neither the label nor a shape anybody recognises.
The button face now carries one short word, with the full sentence kept as
its accessible name and its tooltip, so nothing is lost to a reader or a
pointer. Every locale got its own short form rather than a clipped version
of the long one: Selbst, A mano, Ručně, Elle, 手動.
Below two hundred pixels the row drops both words instead of shortening
them, and the two actions are their icons. The width is the row's own,
measured, not the window's: this column is resizable, so it can be narrow on
a wide screen and a media query would answer the wrong question.
The search button also stops restating the progress. Its label used to grow
into "Searching 3 of 12" while a run was on, which is the longest string in
the panel and the very sentence the progress row directly underneath already
prints next to the share as a figure. It keeps its word, disabled, with the
spinner in front of it.
Three things the first CI run found, all of them in the new tests rather
than in what they cover.
The dialog's search effect depended on the location hint object. Its own
hook memoises, so nothing looped in the app, but the effect sets state on a
query too short to ask about, and a caller whose hook hands back a fresh
literal per render turns that pair into a render loop that never yields. The
suite mocked it exactly that way, and the worker hung before a single test
reported, which is what took the client coverage job past half an hour. The
hint is three numbers, so the effect now turns on those and reads the value
out of a ref when the request goes out. The mock hands back one object, the
way the real hook does.
The suite also installed fake timers in a beforeEach, which deadlocks
against React's scheduler and Testing Library's own waiting. Every wait is
a waitFor now, and the two cases that have to prove something did not
happen sit out a real pause. The debounce boundary is no longer asserted
against a wall clock, because a busy runner stretches any such window.
The charging fixtures are pinned to a fixed instant and the service reads
the real clock against a twenty-minute freshness window, so every answer
through it was stale by construction and available came back null. Date.now
is pinned for those tests, never the timers, since the requests carry an
AbortSignal.timeout that has to keep running.
And the unidentified-station test counted its two "no reliable data" lines
before the answer landed: the price line already says it while the request
is out, so the count settled on one and passed for the wrong reason.
A tester found the charging panel once a station was on the trip and asked
for it while still deciding. The availability and the published tariffs were
reachable only for a saved place: the route takes a places id, and a hit
found along the route has no row yet.
ChargingService.load already needed nothing but a coordinate and a name, so
it now has a public method that says so, behind a trip-scoped route with the
same guard stack, a Zod contract in shared, and the parallel MCP tool in this
same change. Same service, same caches, so a station looked at in the dialog
and then added keys the entry already fetched. Trip-scoped even though the
trip is not part of the question: without :tripId the trip access guard goes
too, and what is left is an open proxy in front of somebody else's public API.
It renders in the add dialog, and only while the selected kind is charging,
so a fuel or food stop costs nothing and one opened dialog is one lookup.
Deliberately not per result row: the corridor search publishes box by box,
every mounted panel owns a refresh timer, a cache miss can cost seven
upstream requests, and a station in a dense charging park is the case the
upstream matcher refuses as ambiguous.
Power and socket counts are not in this answer and were not asked of it.
They are OSM tag data and already ride along on the corridor row for free.
Four things testers asked for in the "Along the route" panel.
Add manually. The corridor search reads OpenStreetMap, and a good share of
the chargers standing at a motorway junction are not in it, Tesla
Superchargers among them. The way round it was to leave road trip mode, add
the place under Days, drag it onto the right day, come back and mark it a
charging stop. The Search button now shares its row with a second one that
asks the two questions those four steps answered: which place, and where on
the drive. The place comes from a debounced typeahead over the place search;
the position from anchorFor, the same projection a via is placed with, and
it is offered as a dropdown of every leg of every routed day so it can be
overridden. Unlike a via, a place far from the drawn line is not refused,
only flagged: that place is the reason this dialog exists. From there it
hands over to the stop popup a corridor hit already goes through, so the
kind and the dwell are decided once for both paths and the write stays
saveStopDraft.
Clear results. A search that turned up the wrong thing left its hits in the
list and its pins on the map, and the only way out was switching to the day
plan and back. The search hook has exposed a clear() since it was written
and nothing ever called it. A control in the results header does now, and
takes the four narrowing states with it, because they were set for a
question that no longer has an answer.
Charging as the default for an electric car. "Looking for" opened on Fuel
whatever the vehicle. It opens on Charging when the trip's vehicle is
electric, and is unchanged for combustion, for an empty value and for a
vehicle nobody set, so nothing moves for anybody who never opened the
dialog. Seeded once, never over a category the traveller picked or a search
in flight.
Clicking a result moves the map to it. The row had no click handler at all;
only the trailing Add button did anything. The badge and the text are one
activatable target with that button as its sibling, which keeps the li a
list item and avoids a button inside a button, and it goes through the same
focusRoadtripPoint the rail uses, which closes the refuel and alternatives
panels first because those outrank the camera.
The ways of driving one leg come from OSRM, except the toll-free or
motorway-free offer beside them: the shipped OSRM hosts are built without
excludable road classes and answer exclude= with HTTP 400, so that one is
asked of the avoidance router instead.
Their figures were then read against each other. The quickest was elected
across both, which is what decides the road drawn as the one being driven,
and every other road was labelled with how far behind that election it sat.
The two engines agree on the road to a tenth of a percent and not at all on
how fast it may be driven: over twelve European legs the per-leg time ran
from 14.7 % under OSRM's to 13.2 % over, with the sign following the region.
On a Spanish motorway leg that gap alone is enough to crown a toll-free
detour and call the motorway somebody is on the slow way round.
An offer now carries the engine that timed it. It takes no part in electing
the quickest, no difference is printed across the two, and the bar says where
the figure came from. Each route still reports its own time; only the
subtraction is refused. An instance running its own OSRM through the MLD
pipeline answers exclude itself, so there both figures are one engine's and
the comparison works exactly as before.
Choosing another road on a leg that already carried a via appended the new
point behind the old one, so the day drove south to the first and north to the
second: a zigzag matching neither the line drawn under the button nor the
distance printed on it. The alternatives are computed for the two bare
endpoints, so the write has to replace the leg, which is what the direct branch
beside it already did.
A day's vias were only loaded while road-trip mode was being looked at, and the
three handlers that re-anchor them after a stop is added, removed or reordered
are reachable from the place inspector in both modes. With the switch off they
computed their correction from an empty list and wrote nothing, so a deleted
stop left the detour on a leg nobody chose, for the traveller and for every
collaborator. They are loaded whenever the addon is on now.
Seam routing paced itself by sleeping after each request, and storing a result
shortened the key its own effect depends on: React tore the effect down
mid-sleep, the cleanup aborted it, and the next request went out immediately.
Thirteen seams left at round-trip speed, the shared routing hosts refused the
tail, and a refused seam changes no state so nothing ever retried it. The wait
now happens before the request, against a clock that outlives the effect.
The "avoidance not honoured" badge could never appear on the rail: the field
behind it was published every round and never written. Only the second engine
reports what it achieved against what was asked, and the rail plans in the
browser, so it never saw the server's own copy — a motorway crossing read as a
motorway-free drive.
Two smaller ones. `trip.toast.loadError` has been called since the first commit
and exists in no locale, so both call sites printed the key itself; it is
written now in all 23. And the phone shell honoured the road-trip session flag
while having no rail, no drive lines and no switch to leave it, so narrowing a
desktop window took the trip overview away and listed every booked night twice.
Three things the day boundary was swallowing, all from the same stay.
The stop after it stayed on yesterday. It is reached a full day later but at a
later reading on the clock, and the only rule watching for a new day was "the
clock went backwards" — which that never does. The schedule's own count knows,
as long as it is read as a difference: a day whose first arrivals came out
negative is lifted whole, and reading the lifted offsets raw once moved an early
stop to tomorrow while leaving the late one behind. It now crosses over properly,
marked as having set off the day before.
The morning after started at the exact minute the stay ended, as if the road to
the first stop took no time. The carried minute is a departure; the drive from
there is added to it.
And that drive was invisible. It was on the map and in the day's total, but the
rail jumped straight to a stop at 08:11 after a stay that ended at 08:00. It gets
the same band any other drive gets, above the stop it arrives at — except where a
stop crossed over, which already draws that road under its own block.
A check-out is the LATEST the room has to be handed back, never the earliest
anybody may drive on, so it says nothing the chain can use. It shaped four things
it had no business shaping: the departure the day was built from, the length the
rail printed for a booked night, a day-selector and a clock field in the stop
dialog, and the branch that sent a night's STAY badge to the booking form because
its length was not editable here. All four go. The booking keeps its check-out;
it is a booking detail and lives under Days, where it is entered.
What replaces it is the thing that was always the honest answer: how long you
stand there. That is the traveller's own statement rather than a deadline, and a
stay running past midnight now carries the clock into the morning after — a stop
pinned before it ends keeps its hour and collects the late finding, as it would
from any leg it cannot make. A stay spanning whole days walks the clock forward
over them. An ordinary evening hands on nothing: the night between two days is
not a wait somebody is serving out.
The stay dialog goes to a full day rather than four hours, since it is now the
only place a night is given its hours, and offers eight and twelve as presets.
Every stop answers the same question the same way.
Overlay panels lose the skeleton placeholder. It was drawn in the page flow, so
the first time each dialog was ever opened a pale block flashed under the planner
and never again once its chunk was cached.
Every day was scheduled from nothing, so a booking that runs into the next day
ended at midnight as far as the chain was concerned. Check in at 08:00 and out
at 08:00 the next day, and the rail was happy to put you somewhere else at 07:00
that morning, with no sign that the room was still yours.
The day a check-out falls in now starts at the check-out rather than at nothing.
A floor, never a move: a stop with a clock of its own keeps it and collects the
late finding any leg it cannot make in time would give it, so a plan that says
07:00 still says 07:00 and merely admits it does not add up. A stop with no clock
starts at the check-out instead of having no time at all.
Only that one day. A stay running Monday to Thursday leaves Tuesday and Wednesday
alone, because you sleep there, you do not sit there.
The departure chip takes the door-out mark instead of a clock face. Beside an
arrival time, a second clock read as a second arrival.
Cases appended to four existing suites for the lines this branch left unrun: the
fold state and the map places it hides, the owner-based via anchor, the day seam
and the proportional geometry slicing, and the live roadtripVia:changed events.
With the four new suites in the commits before this one, coverage of the lines
this branch adds goes from 69 % to 96 %, measured the way the gate measures it —
the routed lines against the diff, not a file average.
Every added case was mutation-checked: the rule it claims to pin was broken in
the source and the case had to fail. Two of them found real defects rather than
missing coverage, and both are fixed here.
A via dropped on the incoming night drive went to the wrong leg. The guard for
it asked the insert index whether the point lay before the card's first stop,
and that index cannot answer: insertIndexForAlong clamps to at least 1 for any
card with two stops or more, and the rail publishes no other kind. So the branch
read correctly and never ran, and a via on the night stretch was filed after the
first drawn stop — the route ran forward, doubled back to the point and carried
on, which is exactly what the comment above it said must not happen. Asked of
the distance instead.
The two one-field writes the rail offers, the stop kind and the fill level, went
straight to the API while their neighbour checked place_edit first. The server
refused them, so nothing was ever saved, but a reader got an error toast for
touching a control that should not have acted.
A day that runs past midnight used to keep every one of its stops on its own
card, so day one ended at 03:12 with three places nobody reaches on day one and
day two began with a drive that had already happened. The rail now lays the
stops out by the date they are actually reached: when the clock goes backwards
between two arrivals the ones after it move to the following day, into a block
that says where they came from, and the night drive and its kilometres go with
them. It is an arrangement, not a write — the day planner beside it is
untouched, nothing reaches the database, and a shorter stay the evening before
puts everything back on its own.
The map follows the same arrangement, because a boundary drawn in the rail and
not on the map is two answers to one question. Day one now ends where its last
reachable stop is and the line, the legs and the totals are cut to match.
Two switches in the driving settings, off by default. "Connect the days" routes
the gap between one day's last stop and the next day's first, which is real
driving the rail has never drawn, and counts it. "A colour per day" then puts
the days back into a line that has become continuous, and tints each day header
to match.
Collapsing a day from its header takes its route and its places off the map as
well as out of the rail, and the categories in the corridor panel fold the same
way. The refuel band is one full-width red band with the pump as its button,
the results are chips, and the driving dialog is two columns of panels with the
figures on one right edge.
Also fixes a via that would not adjust the route once dragged. Five separate
causes, all measured rather than guessed: leg threading used the card index
instead of the owning day's, the anchor lookup returned chain indices, it
filtered by the card rather than by the anchor's owner, seams were routed
without their vias, and a seam once routed was never re-fetched.
A consumption typed as 500 rather than 5.0 makes the tank arithmetic round to a
range of zero. Zero is a number, so the `??` in effectiveRangeKm took it as the
answer and discarded the range the traveller had typed by hand next to it, and
useVehicleRange then folded that zero to null. What reached the rail was "no
range at all": every fuel and charge warning went quiet, with nothing on screen
naming the field that did it.
A range that rounds below one kilometre is a typo rather than a car, so it is
reported as no answer and the typed figure gets its turn.
The fill level was one figure for the whole trip, and a trip does not have one.
A motorway rapid charger is worth about 80 % because the last fifth costs as
long again; the charger at the hotel is worth all of it because the car stands
there all night. Between those two the difference is a whole leg, and a single
setting has to be wrong about one of them.
So the badge on a refuelling stop is now the way in: it shows what that stop
will actually fill to, its own figure or the traveller's, and opens a panel of
the six answers people actually give. Under them it says what the choice buys in
kilometres, because 80 % is an abstraction and "about 290 km from here" is the
thing being decided. Picking the figure a stop already has hands it back to the
setting, the same gesture the kind picker uses to un-pick a kind.
The value lives in places.fill_percent, beside stop_type, because it is a
property of the stop rather than of the person. Null means "follow the setting",
which is every stop that predates the column and every stop nobody has an
opinion about, so nothing changes for a trip that never touches it.
Two pieces of shared machinery came out of it rather than being copied. The
popover chrome — measure before showing, flip when the window is short, close on
an outside click, Escape or a scroll — is one component now, used by the kind
picker and this one. So is the assembly of the range from seven settings, which
the routes hook and the rail both need and which would have drifted the first
time a field was added.
A range could only be typed as one number, and that is the number fewest
travellers actually know. A tank size is on the filler flap, a consumption is in
the manual, a battery capacity and a kWh per hundred are on the data sheet. All
of them divide into the same figure, so the dialog now takes either and does the
division itself. What the parts say wins over what was typed, because it is the
more specific answer, and the range row goes read-only when they do so there is
never a second answer to the same question.
Of ABRP's list only battery wear is here. Plug type, reference speed, relative
speed and drive style shape a consumption PREDICTION; this addon does not
predict one, it divides a capacity by a consumption the traveller states, so
those fields would add typing without moving a kilometre. Wear is different in
kind: it shrinks the capacity itself, and on an older car by enough to decide
whether the last leg of a day arrives.
Storage stays metric throughout, the same rule the range itself follows. An
imperial traveller types gallons, miles per gallon and kWh per 100 miles and
gets them back unchanged; mpg is the inverse of litres per hundred rather than a
scale factor, which a straight multiplication would have stored as a car four
times as thirsty.
The gauge under the picker is the argument that these two ways of stating a
range are the same thing, so it answers while the figures are still being typed
rather than after the field is left. It draws the tank the day it left the
factory: the filled part is what a stop actually puts back in, the hatched tail
is what age has taken off, and both are things the bare number cannot say.
Also here, from the same round: a fill-up that stops short of full. Nobody
charges to 100 % on the road, and counting every stop as a full tank overstated
everything after it by that last fifth. Stops that refuel now carry a badge
saying how far they fill.
Four things that only showed up once it was on screen.
The range budget treated a petrol station and a charger as the same thing, so an electric
car pausing for coffee at a filling station had its battery refilled on paper: the
warnings went quiet for the rest of the day and the driver was told nothing. A vehicle can
now be named, and then only what actually refills it counts — and the search asks for that
kind alone instead of offering pumps to a car that cannot use them. Not saying keeps the
old behaviour, which is what everybody who never opens the dialog is on.
The band was its own shape in a rail made of drive bands. It is one now: the same rail,
the same height, the same type size, a warning tint instead of a ring, and the figures
where a drive band keeps them. The buttons are icons of the same 18px square the shuffle
mark uses, so the band stays one line beside its neighbours.
The old range warning stood down where the band shows. Both at once said the same thing
twice in the wrong order — the answer above the problem — because the warning marks the
stop somebody finds out at while the band sits on the leg the fuel ends on.
Two measured corrections to the search itself. The server turns a box into a circle of
half its diagonal and silently narrows anything past 20 km, so a box of ±25 asked for 35
and came back flagged as narrowed EVERY time, which read on screen as "we could not
check"; ±14 asks for 19.8 and is answered in full. And the circle is centred 12 km before
the dry point rather than on it, because only road already driven is any use — centred on
the point, half the circle was spent on road nobody can reach.
An answer that finds nothing now leaves the button rather than only a close. The place
search is a shared public service that does time out, and "it did not answer" with no way
to ask again reads as broken rather than as busy.
The range budget has always been able to say "you have driven 245 km on this tank" and
never "and here is where to do something about it". The review put it plainly: the value
is in the suggestion, not in the warning.
The warning sits on the stop the car ARRIVES at, which is where somebody finds out. The
fuel runs out earlier, often most of a leg earlier, and a filling station offered at the
warning is one the car cannot reach. So the dry point is computed where it actually is,
a search runs around it on request, and what comes back is filtered to what can be
reached.
Three filters, each one there because its absence gives a wrong answer rather than an
untidy one. Only what lies before the tank empties, because a pump past it is on the far
side of an empty tank. The detour counts double, because 8 km off the road is 16 km of
driving. And a reserve is kept back, because the range figure is a round number from a
manual, not a measurement.
Sorted by the detour rather than by how far it gets. Measured on a real day between
Hamburg and Berlin: the station that got furthest was 9.2 km off the road for one
kilometre more of range, while one 0.9 km off sat almost as late.
Deduplicated by name and half a kilometre, which also came out of that measurement. OSM
maps a charging site as one node per socket: the first three offers were the same
"autostrom plus GmbH" three times over. The four nodes sat in two pairs 6 m and 7 m
apart with 450 m between the pairs, while genuinely different branches of one chain were
18 to 36 km apart — so anything from 500 m upwards separates the two cases.
An empty answer says which kind of empty it is. "Nothing on the reachable stretch" after
a request that failed or was cut short states something that was never checked, and the
server flags both cases itself. Offline it does not offer at all: the place write queues
offline but the day assignment does not, so accepting one would leave an orphan.
Nothing is searched until it is asked for, and one press is one request against a small
circle rather than the sixteen boxes a corridor run costs. Accepting hands the choice to
the same popup a corridor hit goes through, so the stop kind, the dwell time, the
position, the via re-anchoring and the re-route are the paths that already work.
The dry point counts DRIVING metres only. The day's drawn line concatenates every run,
ferries and walks included, while the budget skips those, so walking that line to the
same figure would overshoot by the length of any crossing and put the marker out at sea.
deriveDriveWarnings knew the distance and threw the position away. The warning is filed
against the stop the car ARRIVES at, which can be most of a leg past the point the fuel
actually ran out — fine for a warning, useless for a suggestion, because a filling
station offered at the warning is one the car cannot reach.
emptyAt is a fourth field on the return object rather than a field on each warning, for
two reasons. Five tests assert warnings with toEqual and an extra defined property fails
them all. And a dry point is once per TANK while a warning is once per stop: a long
stretch with nothing on it warns repeatedly on purpose, and one refuel offer per warning
would stack three identical offers for one fill-up down a single day.
drivenMeters counts driving legs only, which is the whole reason it is counted here
rather than derived later. The day's drawn line concatenates every run, ferries and walks
included, while the budget skips those — so walking that line to the same figure
overshoots by the length of any crossing the day contains and puts the marker out at sea.
pointAtMeters walks the driving-only line instead.
Dragging a via somewhere else on the map changed where the point IS and never where it
sits in the chain. The anchor that decides which two stops it is threaded between was
worked out once, when the point was dropped, and the drag sent only coordinates —
`roadtripViaUpdateRequestSchema` carried a lat and a lng and nothing else.
So a via pulled past the stop it used to precede kept claiming the earlier leg. The
router then drove out to it and turned back before carrying on, which on screen is not a
subtly wrong route: it is a spur that reads as the drag having done nothing at all, with
the original road still sitting there unchanged.
The anchor is not a property of the point but of where the point sits along the drive, so
it is recomputed on a drag the same way it is on a drop. The projection that did that was
inline in addRoadtripVia; it moves to a shared `anchorFor` and both callers use it.
A drag differs from a drop in two ways, both deliberate. It measures against its OWN day:
letting the nearest day win, which is right for a click on open map, would hand the via to
a neighbouring day whose road happens to pass closer and make it disappear from the day it
was dragged in. And it has no 2 km guard: pulling a via well off the current road is
exactly what the gesture is for, and the anchor only says which leg gets bent.
`after_order_index` is optional on the way in, so a drag inside one leg and an older
client still send just the coordinates, and the stored pin is then left alone rather
than cleared.
The switch a road tripper keeps asking for has never worked. OSRM's `exclude` is the only
avoidance TREK has, and the two public hosts it ships with answer it HTTP 400 on every
leg: their car profile is built without excludable classes, and their own Lua says why
("no memory for classes on demo server"). So "drive this without the tolls" produced
nothing at all on a default install, and the fallback inside the alternatives bar quietly
gave up after one refusal per host.
FOSSGIS runs a public Valhalla on the whole planet next to that OSRM, keyless, and there
avoidance is a runtime weighting rather than a profile that has to be rebuilt. This adds
it as a second engine asked only the questions the first cannot answer, and puts three
switches under the road trip settings that change the road itself rather than offering an
alternative beside it. Paris to Lyon measured 465.8 km / 297 min with tolls against
492.0 km / 454 min without; Hamburg to Copenhagen comes back ferry-free at 469.8 km,
which OSRM cannot produce at all — where a ferry IS the crossing it answers NoRoute
rather than driving round.
Four things the docs would have got wrong, all measured against the live instance:
- `format=osrm` does not carry `has_toll`. That flag is the entire reason for doing this,
and it exists only in the native answer — which is also 5.7x smaller, because the OSRM
shape drags every intersection along. So the adapter translates instead of borrowing a
familiar envelope.
- Without a `radius` Valhalla refuses a point it cannot bind to a road, where OSRM still
snaps one. Vienna's Stephansdom, in a pedestrian zone, answers error 442 until a search
radius is allowed. TREK is full of such places, so every location carries one.
- Ten locations is a hard cap and a road trip day is bundled into one request. A day over
it is split into runs overlapping by one point, which is exact rather than approximate:
a measured six-stop day came back within two metres and under a second of the same day
asked whole.
- Its drive times run 5.4 % above OSRM's over ten European legs and 36 % above on one, and
those times feed the arrival clocks of a day. So a day is answered by one engine or by
neither, never by both, and a piece that will not answer loses the whole day rather than
half of it — the schedule chains leg times blindly and would otherwise print a complete,
plausible, silently wrong timetable.
Because the weighting can fail, the honest surface is the answer rather than the request.
`use_tolls: 0` still returns a tolled road where there is no untolled crossing, so what
the road actually turned out to be is read back per leg, and a day that could not avoid
what it was asked to avoid says so on its own header instead of wearing a label the road
disproves. The switches disable themselves, with a reason, on an instance pointed at its
own OSRM: that operator chose against public hosts, and a second one they never asked for
would undo the choice.
Two things that would have broken quietly and did not:
- The route cache keys on `profile:unit:coords` and is shared with the day planner, the
studio and the booking geometry. Without the avoidance in the key, flipping a switch
returns the old road out of cache in under a millisecond — and worse, an avoiding answer
stored under the plain key hands those other callers a road nobody drives.
- `snapped` is OSRM-only and carries the dashed kerb-to-door spur from #2273. Valhalla
echoes the coordinates it was given and never says where it bound them, but the ends of
a leg's line are exactly those points: measured against Füssen, its first vertex matches
OSRM's snapped location to the digit.
The alternatives bar gets the same engine, which finally makes its "no motorway" and "no
tolls" offers appear on a default install, plus a ferry-free one. `sameRoad` now compares
geometry rather than numbers there, because two engines' distances for the same road sit
kilometres apart and the old 200 m tolerance called that a discovery.
Desktop only, like the whole road trip mode: nothing under client/src/mobile renders it.
Three things the rail was quietly getting wrong at a day boundary.
A stop reached later than the time set on it showed a warning only when it carried
a number. The schedule restarts its chain at any anchor, whatever kind of stop holds
it, so the finding was computed for a fuel or charging halt too and then thrown away.
Both branches now draw it, from one component, and it sits in the badge row beside
the stay rather than on a line of its own.
The midnight crossing was a small pill floating in the middle of the rail, which read
as a badge belonging to the stop underneath. It is now a band across the full width
that breaks the dashed line instead of letting it run through, with the mascot asleep
in the gap. Both its animations stop under prefers-reduced-motion.
And the stay dialog said 'leave 01:00' for a departure the chain places on the next
day, because the clock wraps modulo 24 h. It now carries the same day marker the rail
has always shown beside such a time.
The schedule only ever walked forward, so a stop before the first pinned time stayed
blank. That is the wrong way round for how people plan: the museum opens at ten, so
when do we have to leave? Pinning the time on the second stop and reading the first
one's departure off the chain is the whole point of pinning it.
The chain now runs both ways — forward from the first known arrival as before,
backward for everything ahead of it, departure being the next arrival minus the
drive and arrival that minus the stay. It stops at a leg that never routed rather
than inventing a duration, and when working back crosses midnight the whole chain
shifts up a day so the earliest stop stays on day zero and the boundary is drawn
between the two stops instead of under the first one.
Five states, one shape. EmptyState grows a `fill` option: the stack already
centres what it holds, but with no height of its own there was nothing to centre
inside, so every one of them sat pinned under the header of its column.
Optically centred rather than geometrically. The extra room goes underneath,
which puts the mascot slightly above the middle: in a column you can scroll,
dead centre reads as having fallen to the bottom the moment the list is short.
The details column's own placeholder joins them, with the idle look rather than
the sad one, because nothing being picked yet is a state and not a fault. Its
line is shortened to fit on one: "Pick a result to see more", in all 23
languages.
The corridor panel, the saved-places list and the place details all dropped
`compact`, so the five now read at the same size as the road trip rail.
Six changes to the place picker and the card behind it, all of them about a
panel saying less and meaning more.
The TREK place index has no switch in the admin panel any more. It decides
whether a search leaves the instance at all, which is a property of the
deployment rather than a taste: an operator pins TREK_PLACES_ENABLED=false in
their compose file, and it cannot be turned off from a browser by whoever holds
an admin account that day. The switch never shipped, so nothing to migrate.
The standing "Using OpenStreetMap" notice above the search box is gone. It was
a sentence about configuration in the middle of a form about a place, and it
answered a question nobody asked while leaving the real one open. Each result
now carries a small mark instead: TREK, OpenStreetMap or Google. It sits on the
row rather than above the list, because a list can be two indexes interleaved
and a heading could only name one of them.
The saved-places filters open across the full width of the row. Two of them sit
side by side, only one can be open at a time, and list names were being cut at
about ten characters for no reason.
Three empty states use the mascot the rest of TREK uses. The place details panel
no longer tells the reader to go and ask an administrator for a Google key, the
saved-places list and the road trip rail no longer explain themselves in two
lines of grey text. That needed one new mood, `sad`: `sleepy` reads as falling
asleep, which is a different thing from finding nothing.
The Kind of stop field is out of the place form. It is a road trip concept, and
the road trip view already sets it from the stop's own number, where the choice
is next to what it changes.
Maurice