TestFlight feedback: on an iPhone Duo the status capsule in the top right
corner covered the trip's controls, its day chips, the map's category bar and
the first cards of every trip tab, upright and on its side. The app has
measured the capsule since 0f42b8b8a, but only the shell's own bars and page
used it, and the trip, its map and the sheets place their own controls.
- Upright, a control row in the capsule's height stands beside it and the
content starts below it: the trip's top row and day chips, the map's
category bar, the road trip's stage bar, every trip tab's first row, the
places browser, the plan timeline, docked and card sheets, the assistant,
the account menu, the image viewer's close button, the atlas search,
vacay's header and a journey's content and map controls.
- On a wide window the page gives up the capsule's side over the whole
height instead, as an iPhone on its side does for its camera: lifting each
page below the capsule cost a quarter of the height of an unfolded Duo.
The list tabs, the assistant panel and the form sheets end before it too.
- Screens whose first row is part of the page (settings, administration,
collections) are lifted until that row is below the capsule; screens that
keep clear of it by themselves (atlas, vacay, a journey) are not lifted.
- Right to left the rail stands on the capsule's side and takes it.
All of it reads the corner variables the app publishes, which are 0 on every
other device and before iOS 26, so nothing else moves. The rules for the
screens that place their own controls live in mobile/corner.css.
Tapping a transport in the compact Transports or Bookings list on the phone
opens the transport sheet, and its time boxes showed only the clock time. The
sheet named a date only in its subline, and only for a booking with no route
and no airline or number, so a flight or ferry could not be placed on a day
without unfolding the whole list. A transport holding only times (its date
lives on the linked trip day) had no date at all, and the desktop transport
detail dialog had the same gap: it read the date off reservation_time alone
and never named the arrival day of an overnight trip.
The dates now come from one helper, bookingDates(), which reads the booking's
own date, then the stop's local date, then the linked day's date, the rule
bookingFacts already used and now shares. The phone sheet prints the date
above each time (a leg opened from its row uses its own days); when no time
box carries a date, because no time is entered yet or the live flight card
stands in their place, the subline names the day instead. The desktop dialog
names the day, or both days of an overnight trip in reading order, in the
user's locale.
Closes#3122
The text tabs name their field type for the switch, so it type-checks. The
colour field's sliders run left to right in every language and say so with
dir=ltr and a logical inset. The new phone fields take their sizes from the
type tiers or fs() instead of rem literals, the category field builds its
icon as an element, and the ESLint and theme baselines come down to what the
tree now holds. The tests follow the tabs (only the open tab's field and
formatting bar are shown), the category list and the files row, whose link
button keeps its place before attach.
Tags on the place form are pills in their own colour, with a palette under
the dot that recolours a tag for the whole trip (PUT /trips/:id/tags/:id was
there already, the client now reaches it through repo and store) and a
custom colour field of its own instead of the system picker. A new tag is
made in a colour picked the same way.
Description, notes and the note for one day's visit sit in one card under a
switch, each with a line on where the text shows up; the day tab is named
after its day and is only there with one visit in context. Nothing about the
three fields changes underneath.
Opening hours get a switch for open around the clock next to closed. Google
writes a place open all week as one period on Sunday that never closes; it
read as Sunday open and every other day closed, and now opens every day.
The phone form follows the desktop: category as one field with a list, tags
in one field, the texts switch, and phone, e-mail and opening hours, which it
did not have. The hours and the text tabs are shared hooks (usePlaceHours,
usePlaceTextTabs). Files and costs on the phone sheets are drawn as fields
like the rest, and the paste hint, a keyboard shortcut a phone has no use
for, is gone with its key.
A place keeps its one category, which decides its marker, and can now carry
any number of tags as extra labels to filter by.
- Tags belong to the trip (tags.trip_id): every member sees the same list and
whoever may edit the trip's places adds, renames and deletes. Personal tags
stay what they were.
- The place form picks them on desktop and mobile through one shared hook,
usePlaceTags, and can add a new tag to the trip on the spot.
- The existing category filter of the places list lists the tags as well.
- Tags show on the place (inspector pills, phone place sheet); the marker is
untouched.
- MCP: create_place, create_and_assign_place and update_place take `tags`,
and list/create/update/delete_trip_tag manage a trip's tags.
- /api/trips/:tripId/tags and the tripTags:changed event keep every client
of the trip in step.
The print-mode photos held their source back for the print view, but the
assistant also draws pages in print mode and needs its photos loaded. Only
the export's sheets now ask for it, the loader reads a minimal print
document like whenReady, and the new test helpers stay within the client's
TypeScript target and lint baseline.
The booking dialog and the phone sheet hid their departure and arrival tiles
as soon as the store held any leg of the flight, but a leg long over or never
seen by the feed draws no live card, so such a flight showed no times at
all. Both views now hide the tiles only for legs that get a card.
Every printed photo got its src at once, off screen in the editor and again
in the print frame, so a journey with a few hundred photos asked for every
original in parallel and the browser failed with insufficient resources.
The print markup now holds the source back, and the print view hands it over
four at a time, retries a failed photo once, gives up on one that never
answers and shows the progress on the Save button.
Closes#3102
The PENDING pill beside a title broke long names over several lines; a small
dot on the type icon's corner now carries the status's first letter (A for
Ausstehend, P for Pending), with the word as its tooltip and accessible name.
The time and the trip or place below the name are soft badges instead of a
line strung together with dots. Desktop and phone alike.
The progress card says how many tasks are done with a slim bar, a round "+"
for a new task and a "..." for the order and the lists; the filters sit in
one tinted track, with "Mine" kept short there; and the tasks are rows of one
card, with priority and due date under the name and the assignee's face.
A row now shows its box, its name and only what is set: the amount from two
up, the pieces packed while packing, and who brings it. A click on the name
opens a small window at the row with the list, amount, pieces packed, weight,
bag, who brings it and who sees it, each as one pill, plus copy and delete,
instead of fields, a bin and menus in menus on every row. Above the lists the
Lists bar keeps Add list and gathers templates, import, export, the order,
hiding packed items, the bags on a narrow screen and the clean-up in one menu;
the progress moves next to the Shared/My list switch. The bag overview stays.
The phone follows the same shape: one "..." sheet for the list's actions, a
sheet per list for its own, a slim row and an item sheet that saves as you go.
Who may change what about an item lives in one module both views read.
A nullable day_assignments.stay_minutes holds the stay of one visit; a visit without one keeps reading the place's duration, so existing trips drive as before. REST PUT /trips/:tripId/assignments/:id/stay and the MCP tool set_assignment_stay write it with day_edit.
Keeping the whole right inset clear gave up a strip of the full height for a
capsule that only sits in the corner. The iOS app now measures an element in
a top corner (iOS 26 safe area with corner adaptation, vertical against
horizontal) and hands its reach and width to the page: the floating bars
stand beside it, the page keeps the full width and starts below it. Without
such an element, on every other device and before iOS 26, nothing changes.
TestFlight feedback from an iPhone Duo:
- Folded, the status capsule stands in the right inset and ran over the hero
card's actions; the page now keeps clear of the side insets as iOS asks
(.m-page), and a floating bar keeps a little air next to an inset.
- Unfolded, the top bar ignored the trailing inset and the capsule sat on the
avatar; on a wide window the bars now end before it, by their box, so a
bar that centres itself still does.
- Dragging the dashboard's second column back up refreshed the page: a pull
that starts inside a box scrolled on its own now belongs to that box.
- MApiKeysSection: the keys with what each may read, creating one in a sheet
(name, the areas as chips, the key shown once with a copy button), deleting
behind a confirm sheet, and the endpoint to copy.
- The list and every action move from ApiKeysSection into useApiKeys, shared
by both views; the calls go through a small online-only apiKeysRepo, so no
view reaches the API (offline baseline loses ApiKeysSection and
AdminSettingsTab).
- The phone's Integrations tab is always there now, as on the desktop: the
keys in it need no addon.
- A test title no longer breaks on its apostrophe.
- Admin notifications: the defaults every user's cells start as, one row per
event with a pill per channel cycling On, Off and Blocked
(MAdminNotificationDefaults); the grid's constants are shared with the
desktop panel in notificationDefaultsModel.
- Editing a user offers "Remove SSO link" behind a confirm sheet, as on the
desktop, once SSO is set up and never for yourself.
- Settings: the wanderer connection (MWandererConnectionSection, on
useWandererConnection) and the language of place names under General.
- MSetCard takes a brand mark as its icon, not only a lucide icon.
- Place search and routing as one card, as on the desktop: TREK's own
services, today's allowance with a new identity behind a confirm sheet
(MAdminServiceQuota), sharing place details (MAdminPlaceContrib), the transit
backend and the place search provider as TREK selects, and the search log.
- The key card holds Google (with its options and the daily request cap,
MAdminGoogleDailyLimit), Unsplash and Amap, in the desktop order.
- The logic both views need moves into one place: the transit switch into
useAdminSettingsActions, the allowance figures into serviceIdentityModel,
and the share-place-details panel into usePlaceContribPanel.
- MAdminSettingsSection renders each section in a function of its own.
- Tests follow the split admin sections (Save order, 2FA label, field marker).
- The phone's admin sections follow the desktop sidebar: the same groups
(Users, Configuration, Maintenance) in its dropdown, Security and Services
instead of one Settings section, and live flights and booking mails beside
the addons they configure. An old ?tab=settings link still opens Security.
- Passkey login and the 2FA rule sit with the other ways in; the passkey card
keeps the domain, and a managed install no longer shows the danger zone.
- MAdminSelect replaces every native select on the admin screens: TREK's own
field or row pill that opens the picker sheet (permissions, backup schedule,
invite trip, plugin settings).
- Explanations wait behind an info mark (MHintLabel), as on the desktop: admin
rows and fields, the settings rows' new `hint`, addon and provider rows.
- Permissions are one line each with the level as a pill; addon rows lose the
type badge their heading already names; settings buttons no longer wrap.
- "Require 2FA" in every language; admin.tabs.settings is unused and gone.
The tests now look for what the pages show after the redesign: the admin
Settings tab is Security and Services, MCP Access and User Defaults are MCP
and Defaults, notification channels and the 2FA rule are rows with a named
switch, hints sit behind the info mark, each addon type card counts its own
addons, OAuth scopes and the AI sharing note are shown in full, and the 2FA
disable password is the field beside the code. The phone's MCP admin header
keeps its own title, MCP Access. The mail pill test renders with
translations, so it finds From mail rather than the key.
The settings pages had grown into a mix of styles: folds, dialogs behind
rows, full-width rows next to boxed ones, pills for every figure and buttons
in four sizes. Every page now uses the same kit.
- Cards keep their tinted head band; every part of a card is a rounded block
with its own small head (SettingsBlock), and rows sit in rounded boxes.
- Nothing folds and nothing hides behind a dialog: the MCP config, OAuth
scopes, mail how-to, AI privacy note and addon sub-options are all shown.
- Each page is split into two columns balanced by length (SettingsColumns).
- Long explanations moved into an info mark next to the label (HintMark).
- One button size everywhere (text-control); tab names are one word.
- Admin: the old Settings tab is split into Security and Services
(?tab=settings still opens Security, and the phone keeps its single
Settings section for both); the Integration group is gone, live flights
and mail import sit next to the addons they configure.
- Addons: one card per type with rows, no search, filter or fold.
- Quota, TREK API facts, mail import status and Google's daily limit are
compact lines and strips instead of tiles and pills.
- Language is a select; routing has its own card under the defaults;
storage saves from the foot of its categories card.
- Unused keys, FoldSummary and the page-width wrapper are removed.
Inside the trip settings, Escape and the backdrop no longer close the dialog
while the date question is up, and the embedded form does not load the
members it does not show. Every trip open is timed afresh for the splash.
The tests follow the cover image card, the danger button, the delayed splash
and the open and download mocks.
New warnings fixed at their source (refs written in effects, typed tile
options, no stray imports, smaller functions and components), the payer and
split heads hold their switch instead of letting it overhang, the baselines
lowered where the round removed warnings, and the tests updated to the
solo trip, the shares view and the revisit status.
The trip settings sheet opens on a list of its areas, each a page of its own
with a way back, and the journal there is drawn in the phone's own cards. A
new packing list is typed into a card with its add and cancel, selecting
places keeps its way out in view with the actions as icons below, and the
journey's satellite switch sits in its bar beside the menu.
Edit trip is an area of the settings dialog, beside People, Sharing and
Journal, instead of a second dialog. The side column names the areas only, the
dialog keeps one height, and every area uses the same cards, fields and
buttons; the trip form on its own takes the same head, cards and buttons. A
trip that loads quickly opens without the splash on the desktop too.
The transport sheet's row wrapped once a ticket and the wallet were there.
Its actions are icons now, named by their labels, and the attachments sit in
their own rows with a download, like the transports list. The wallet is a
black circle, beside the close button in the booking editor. A failed
download on the phone now says so.
The list menu on desktop and phone gets "Sharing for Whole List": pick
Shared, Personal or Shared with people once and every item of yours in
that list moves there through the existing per-item sharing write. Items
other people added stay as they are, and the dialog says so up front.
A new app setting oidc_auto_redirect (default on) is part of the admin form
and the public app config. Off, an instance without password login no longer
sends visitors straight to the IdP: the login page shows its SSO button,
also while the cached config is read. Admin toggle on desktop and phone.
On the road a stop's picture is often what decides whether it is worth the
detour. The phone's stop sheet shows the place's picture full width under its
name and the desktop stop dialog shows it in place of the kind tile; both open
the place's photos on tap. The picture is the place's own image, else the
provider photo for its Google or OSM id through the shared photo cache.
Google Maps takes no list from outside, but My Maps imports a KML layer.
The trip export dialog and the phone export sheet get "Places for Google
My Maps" (GET places/export.kml, MCP export_trip_kml), and a list's export
menu gets KML next to GPX. The KML codec gains a pin writer; the list file
mapping moves to collections.helpers to keep the service within its size.
A fourth status after visited, for a place already seen that the user wants
to go back to. It joins the one-tap cycle, the filters, the pickers, the
assistant cards and the MCP status tool, and counts as visited wherever
visits are counted (isVisitedCollectionStatus), so "visited everywhere"
keeps it. The status pickers go two by two where four would not fit.
The phone toolbar gets a category chip beside the status and label chips,
fed by the same categoryOptions the desktop dropdown uses, and no longer
clears a category picked on desktop. Managing labels moves into the label
panel so the row keeps four chips at phone width.
Mapbox Standard labels shops, restaurants and sights of its own; they look like trip
places but cannot be picked. A Hide Points of Interest switch next to the other Mapbox
options, on the desktop and the phone, turns them off on the trip map and the preview
without a rebuild. The Standard config handling moves into useStandardBasemapConfig.
A place saved with a typed address and no search pick, link or map point gets no
coordinates, so it never shows on the map, and nothing said why. The place form warns
under the address while that is so, and the inspector, the phone's place sheet and
both place lists mark such a place. No geocoding on save; the form stays unchanged
for a service stop, which explains a missing position itself.
Costs always converted to the display currency from Settings, so a trip
that moves on to another country could not be read in its new local
currency. A picker in the Costs bar (beside the Expenses heading on the
phone) now reads one trip in any currency; the server already settles in
any base. The pick is per trip and kept in this browser, nothing stored.
Seeing what a trip cost without, say, food meant adding it up by hand. A
click (or tap) on a category in the breakdown now leaves it out of the
total, your share and what you paid, dimmed in place with a line naming it
and Count all to undo. View only: nothing is saved, and what is owed, open
or settled stays whole. The desktop breakdown moves into its own component.
Travellers who track what a trip costs but never split it saw an
Unfinished warning on every expense and a settle-up they had no use for.
A trip now has a costs mode (appended migration, trips.costs_mode, split
by default); totals leaves payers, shares and settling up out of Costs on
desktop and phone through the same gate as a trip of one, and saves new
expenses without a payer. PUT /api/trips/:id and update_trip take it on
budget_edit. The split chips move into their own component.
With one traveler every share is the whole amount, yet Costs showed owe,
owed, outstanding, settle-up, balances and the final budget. A shared gate
(showsSplitting) now hides that side on desktop and phone, unless the ledger
still names someone else; the expense editor drops who paid and the split
while the expense holds nothing more. The payment dialog moves into its own
file to keep the panel under the size ratchet.
A booking confirmation that is also the invoice had to be uploaded a second
time to sit on the expense. The expense editor (desktop and phone) now lists
the trip's files to link, the booking's own first; the save sends the id in
receipt_file_ids, which the server already links. The desktop receipts block
moves into its own component.
A stay shared by people who slept a different number of nights had to be
worked out by hand. The custom split now takes shares next to amounts and
percent: five nights against four split the total 5/9 to 4/9, cent-exact by
largest remainder. Only the amounts are saved, so server and MCP are
unchanged; the phone sheet gains the same unit switch, percent included.
lint:i18n-keys took the spread in front of t() for a member call and did not
see native.provisioning.sub; the sentence is its own constant now. The
shell chrome test asks for the logical margins and their right-to-left swap.
The screens the app ships itself (welcome, plans, address, own server and
the states between) move from the dark card layout to a light design on an
animated aerial landscape drawn by a WebGL shader (native-shell/scenery.ts):
an island, a coastal town, farmland and mountains in one world.
- Welcome: the landscape with the TREK wordmark, three perks in one card,
"Explore cloud plans" and "I already have a TREK" as two buttons.
- Plans: one tab per plan; choosing one flies the camera to its place,
further inland with every plan. Each plan reads as a kind of trip, the
price sits in a card with a monthly/yearly switch and counts to its new
amount in the store's own format (native-shell/amount.ts), and a yearly
price shows what it makes a month. Restore purchases, the renewal terms
and the links stay as the store rules require.
- Address: the address writes itself on a glass card over the landscape;
free, the password rules and the agreement sit on white cards.
- Own server: the server address on the glass card; a failed check turns
the card red with what went wrong, proxy sign-in and client certificate
panels in the same style.
- States: server not reachable, certificate needed, already subscribed,
setting up (with its steps, then "Arrived") and the slow setup.
- iPad, an unfolded phone and a phone on its side get two columns, the
landscape beside the content; on a dual-screen device each half takes
one screen. Arabic and Hebrew mirror through logical sides only.
- The shader caps the pixel ratio at 2, drops to a lower resolution on a
slow device, stops in the background and is one still frame with
reduced motion.
- The sign-in and error page bars over a proxy's page (iOS and Android)
take the same look: a white card and a dark button.
- Plus Jakarta Sans is bundled for the text, with Montserrat standing in
for Cyrillic; the wordmark fonts and the old preview images are gone.
- New strings in all 28 languages; the keys of the old screens removed.
- The dev sample plans follow the cloud's plans (start, basis, plus, pro).
The iOS app hands the page the safe area it measures, a floor under env() where WebKit reports none, and on a phone the floating bars keep clear of the side insets as well.
The dim faded in on the sheet's own parent, and opacity multiplies down the tree, so for its first frames even the opaque sheet let the list behind read through as ghost text (Android tester, expense editor). The dim now fades on a layer of its own beside the sheet, and the card is opaque halfway through its pop.
A tester could not tell which settings follow the account to every device and which stay on the phone, and looked for offline mode for a while. The section list and dropdown now stand under two headings, "Your account" and "This device". The server the app opens, the app lock and a client certificate move out of Account into a section of their own, "App", shown only in the app, next to Offline; About stands under TREK. Labels in all locales. TestFlight feedback, 5.1.3.
The two new test files mocked the db module and built VacayService by hand,
which the test-mocks and new-service ratchets refuse for files without a
baseline entry. The cases move back into vacay.service.test.ts and
vacay.test.ts unchanged; VACAY-037 asks for a year no other case caches. The
unrelated admin addon test change is reverted and two comments name the new
provider.