HIK-01. The details of the hiking planner gain an optional Winter activity
switch, off by default, so the normal hiking flow asks for nothing more.
Switched on, the hike is a winter hike or a snowshoe hike; the choice stays
dimmed and out of reach while the switch is off. The label is saved with the
tour, comes back when it is opened, survives a draft reload, a copy and a
take-over, and switching it off takes only the label away: the route, its
grade and the days stay as they were.
The label is a label only. Routing, the walking time and the 3D terrain view
work as for any hike, and the info dot and the head pill's tooltip say that
nothing was checked for snow, avalanches or whether a path can be walked in
winter. The saved label shows as a frosted snowflake on the corner of the
tour's tile in the tour list and the day plan, and as a pill beside the type
in the tour's detail.
The server keeps it in tours.winter_activity (CHECK list, NULL for every tour
saved before and for every other type), refuses it on a bike tour, a city walk
and a paddle tour, and keeps the stored label when an older client saves a
hike without the field. A snowshoe hike exports to GPX as snowshoeing.
list_tours names the field, with the same words on what it does not say.
An assistant connected over MCP can now prepare a city walk from what the
traveller tells it. propose_city_walk takes a start (and an end), a time
frame on a day of the trip, the themes of CW-05, the stations the
traveller wishes for, the places of the trip it may use and fixed
appointments with their times, and saves nothing. Places for the themes
come from the search along a tour, at most eight, each with the theme,
category and source that brought it; nothing is made up. The stations are
ordered on estimates over the straight distance, and a place of a theme or
of the trip goes in only where it is open on arrival, keeps the frame and
the appointments, and leaves every station already on the walk open when
the walk gets there. The walk in that order is then planned on foot by the
router the road trip uses (the traveller's own routing server where they
set one), and its legs give the walking distance and time from one station
to the next. Where the router cannot be reached, or a station lies more
than 300 m off every way (the planner's limit, now shared with the
server), the times are estimates over the straight distance with an
allowance for streets at 4.5 km/h, and the answer says so and why. The
answer gives the arrival and leave times, the stay where the traveller
gave it and unknown otherwise, which makes every later arrival the
earliest one, and the opening hours checked against the arrival on that
day with the helpers the planner uses. Walking and stays are counted
apart, the total is complete only when every stay is known, and the
minutes the frame leaves for the unknown stays are named. Free time before
an appointment or at the end, wishes and appointments that cannot be kept
as asked, and places left out with their reason are listed; a tour of the
trip offered as a station is named as a tour. A wish or an appointment is
never dropped; an appointment is a must and protected. A place's default
duration is not read as a stay: every place carries one, so it says
nothing.
Once the traveller confirms, create_city_walk saves the walk through the
same creation the planner's save uses: one write, a key for every station,
the links to the trip's places checked, the trip told, with place editing
permission on the trip. Its way on foot is planned by the same router and
saved with the walk, together with its distance and walking time. Where
the router gives no way, the walk is saved with its stations only and the
answer says why: no line, no distance and no walking time. The tours list
says so (route_pending), the tour detail says in one line that the way is
planned in the planner, and opening the walk in the planner plans its way
at once and offers to save it, with a note once it is planned that it was
just planned. Such a walk can be saved as a new tour and taken over into
another trip, starting at its first stop, and is never offered as a place
to stay. A tour without a line needs two points of its own.
get_tour_plan now spells out every field of a city walk's stations: key,
name, stay (null when not known), importance (null for normal), protection
(false when not set) and opening hours (null when none are known);
list_tours names the station count and whether a walk waits for its way,
get_city_walk_progress gives each station's key and opening hours, and
take_over_tour says a walk keeps its stations with their protection. No
tool changes a walk's stations; deleting a walk's place takes its stations
along, protected ones included, and both delete tools now ask the
assistant to name those and ask the traveller first. REST answers the
stations as before.
A tour create refused for a type that is switched off, a description that
is too long or planned times out of range is a domain refusal now, so an
assistant gets the same text REST sends; REST still answers it as an error
at 400.
When the name of maps.app.goo.gl or goo.gl could not be looked up for a
moment, the walk import said the short link leads somewhere other than
Google Maps. It now says the link could not be followed just now and answers
502, as for any other failure on the way; a name that leads into this
network is still refused.
A short link Google answers with 404 or 410 is one it does not know, and
asking again changes nothing. The dialog now says so in the reader's
language and asks to share the route from Google Maps again, with a 400 and
the reason short_link_unknown, instead of suggesting to try again later. A
busy or blocking answer from Google stays a failure that may pass.
The MCP tool preview_google_maps_walk is marked open world, since it follows
a short link to Google on every call, and the English text REST and MCP send
for each reason is held to the English text the planner shows.
"Add tour" in the planner now offers "Import walk from Google Maps". The
dialog takes the link of a route shared in Google Maps, either a
maps.app.goo.gl short link or the long google.com/maps/dir link, or the
share text of the Google Maps app with the one link in it. It shows the
stops in their order with their names, marks a stop the link gives no
position as such, says that the route comes from Google Maps with a link to
open it there, and that TREK plans the way between the stops itself and
does not take the line drawn in Google Maps over. Nothing is written until
"Load as walk": that opens a new, unsaved city walk in the planner with the
positioned stops and their names, routed on foot by TREK, and warns first
when it replaces unsaved work. A stop without a position is left out and
never looked up or guessed; with fewer than two positions nothing can be
loaded. While the walk is not saved, a calm notice in the planner says
where it came from, also after a reload of the draft. Cancelling or a
failure leaves every tour as it was.
Only a route the link marks unambiguously as on foot is read. A car, bike
or transit route, a link that does not say, or one that says two things is
refused with a reason the dialog gives in the reader's language. Each stop
takes its position from its own block of the link's data, so a line
dragged through extra points or a stop given as coordinates no longer
leaves the stops without positions or shifts them. The road trip and
places imports read links as before.
A short link is followed by a resolver of its own: every hop is checked
against the Google Maps short link shapes and the strict SSRF guard before
it is looked up or asked, so ALLOW_INTERNAL_NETWORK and
ALLOW_LINK_LOCAL_IPS do not open it. Each request goes to the vetted
addresses only, follows nothing by itself, reads no body and carries no
credentials; the chain has one deadline including name lookups, at most
three hops and a cap on the Location header, and the long link it ends on
must be Google Maps and is never fetched. The preview is POST
/api/trips/:tripId/tours/import/google-maps/preview for members who may
edit places, with a 502 when Google could not be reached, and the MCP tool
preview_google_maps_walk reads the same.
A stay, a name, an importance or a protection set in a stop's dialog no
longer plans a city walk's route again: the walk stays ready to save, its
time overview follows at once, and one undo takes the change back without
routing either. A stop moved or added plans the route again as before. A
walk saves no breaks, so a cafe never counts as a stay and as a break at
once, and a break left from another type neither counts nor holds its save
up.
The planner and the tour detail show a walk's walking time, its stays and
their total apart and in the same words: 45 minutes of walking, a museum of
90 minutes and a cafe of 30 minutes make 2 h 45 min. A stay not entered yet
makes the stays and the total at least what is known, stays nobody entered
read not known yet, and stays entered as 0 read 0 min. A total entered by
hand keeps its own label, and the computed total shows beside it. The head
of the tour detail, the day row on the desktop and the phone, the tour
summary and the library of other trips show that same total, with a ≥ where
a stay is missing. Their time on the move is called walking, and the summary
says a walk is planned with its stays rather than breaks.
The tour list and the library carry the minutes a walk's stops are entered
with and how many have no stay yet, counted from the walk's points, so the
way back of a loop is no stop and its start's stay counts once. A loop run
the other way keeps its start as the stop there, with its key, name and
stay.
The planner's waypoint list keeps the rows of a leg in a file of their own,
and the tour detail its name heading in a part of its own, so both stay
within their size limits.
A walk saved from the planner kept its stops without the keys the server
gave them, so the next save from the same open planner handed every stop a
new key and dropped the visits checked off in the day plan meanwhile. The
planner now takes over the keys a save answers, point by point, without
planning the route again, so a stop keeps its key and its visits from one
save to the next.
The edits of a stop's dialog now reach the planner: a changed name, stay,
importance or protection counted as no change and was dropped. It is a step
of its own that can be undone, Save stays available, and the route is not
planned again for it.
A save that takes stops out of a walk, or makes it another type, tells every
client of the trip which visits are left on each day the walk is on, the
client that saved included, so the progress in the day row no longer counts
a stop the walk has lost.
The way back of a loop is the start again and no stop of its own. Closing a
loop gives it only the start's spot and the place it stands for, and the
planner's stays, the stops of the tour detail, the stop count of the tour
list, the visits and the progress an assistant reads leave it out, so a loop
through three stops counts three, the start's stay counts once and the way
back cannot be checked off on its own. A loop saved before keeps working.
The rule lives in one helper the server and the client share, and the tour
list takes its stop count from the walk's points through it.
The tests that seed a walk for the assistant's progress go through the ORM
factories.
Marking a stop of a city walk visited or skipped answered with a server
error every time: the write that keeps a changed status stamped its time as
a function call, which neither SQLite nor Postgres takes. It now uses the
clock the database itself spells, so a stop checked off, skipped or taken
back stays that way and the day plan of everyone on the trip follows.
The Save button of a stop's dialog in the planner did nothing, because it
sat outside the dialog's form. It saves the name, stay, importance and
protection again. A walk saved with two points that carry one key, as a
loop back to the start does, keeps that key on the first point and gives
the other one of its own, so checking one off never marks both. A walk put
on one day twice is read for an assistant from its first assignment.
The server tests cover the visits from the repository to the routes: per
day, through a moved and a removed assignment, a copy of the walk and a
copied trip without visits, a removed stop taking its visits along, and
the refusals for another trip, a stop the walk does not have, a member who
may not edit days and an unknown key or body. The MCP progress of a walk,
the station fields and counts of the tour list, and the contracts in
shared are tested too; the existing tests expect the keys every saved
point now carries, the station count of a list row and the new entity.
The client tests cover the stop dialog and its pills, the walk themes and
categories of the search along a tour, the stop menu of the waypoint list,
the walk's timing, routing and type choice, and answer the trip planner's
read of the visits in the tests instead of leaving it unanswered.
The search along a tour found nothing. It asked the places index for all
kinds of a stretch at once, above the 100 rows and 200 characters of terms
the index takes, so the index refused and every stretch went to the public
Overpass mirrors, which do not answer from this server. Now the index is
asked in small circles strung along the line, one request per kind and
circle within its limits, and an empty circle counts as an answer, so a
city walk lists its sights, museums, parks, cafes, restaurants and markets
in well under a second. The kinds the index does not know (viewpoints,
huts, drinking water, toilets and the like) are asked of Overpass along the
whole line at the same time, one query per stretch of up to 50 km, three at
a time, each with a short deadline of its own; a line past 400 km is
searched along its start and says so. When the index answers no circle at
all, its kinds go to Overpass beside the others instead of after them. A
kind no source could be searched for is named in a calm notice above the
list instead of reporting nothing found, and the reason is written to the
log. Unnamed taps, toilets, shelters, picnic spots, viewpoints, summits,
slipways and repair stands stay in the list and on the map under the name
of their kind; an unnamed garden, cafe or memorial is left out. The places
nearest the line are kept when there are more than sixty, listed from the
start, with the opening hours the source has.
A walk's parks are parks and gardens only, and its museums are museums
and galleries only, no longer the beaches, summits, theatres and cinemas of
the map's explore buttons; a water park the index files under parks is not
one of them. The index also answers markets and summits. The explore
buttons keep their single request, and a search of several kinds that
would exceed the index limits is asked one kind at a time instead of being
refused. The MCP tool search_tour_pois and its wiki row describe the walk
kinds and the new unavailable list, and the OVERPASS_TIMEOUT_MS row says
the search along a tour keeps its own shorter deadline.
A tour can be a bike tour with a routing profile (touring, road, gravel,
mtb), stored per tour by a new migration. The server grades the ways of a
mountain bike route from OpenStreetMap (mtb:scale) through one shared
Overpass client, offers CyclOSM behind its own admin switch, and exports a
bike tour's GPX with the activity of its profile. A hike's route choices
are now exactly the three the card names: steep climbs, steps and ferries.
POST /api/trips/:tripId/tours/poi-search looks for what a hike or a paddle
tour stops for along a line: viewpoints, peaks, shelters, drinking water,
food, toilets, picnic spots, campsites and sights, and on the water
slipways and boat rental. The line comes in the body, so a draft not yet
saved can be searched, thinned to at most 1000 points; the corridor is
50 m to 2 km wide.
The line is cut into stretches as the road trip's corridor search does,
each searched through the map search (the TREK places index first,
OpenStreetMap after), three at a time; a long line is searched along its
first twelve stretches and the answer says so (capped). The places kept
lie within the corridor of the line itself, each once, nearest the start
first, up to 60, each with its source, kind, address, website, phone and
opening hours as the source has them, its distance straight across to the
line (distance_m, never called a detour) and how far along it lies. A
stretch that fails leaves the others' places and marks the answer partial;
a cut answer is truncated. Nothing is written. It is a read, so anyone who
sees the trip may ask.
The map search's OSM filters gain those outdoor categories; the explore
pill does not offer them. MCP: search_tour_pois, along a saved tour's line.
GET /api/tours/library lists the tours of every trip the user owns or is a
member of, with the trip each is in and how many tours each trip holds, to
choose one to take over into the trip being planned. It is narrowed by a
part of the name (matched ignoring case, a "%" or "_" just a character), a
type or one trip, and the asking trip can be left out; up to 100 tours, and
the answer says when there were more. GET /api/tours/library/:placeId
previews one: its facts and its line thinned to 400 points, its ends kept.
Neither is trip-scoped, so every answer is bounded by the user's own trips,
read anew each call: a tour of a trip out of reach is "not found", nothing
hints that it exists. Measures stay null where the tour has none.
POST /api/trips/:tripId/tours/take-over copies one into this trip, which the
guard checks with 'place_edit'; the source trip is checked against the
user's trips as they are at that moment, and the source is read again inside
the write. The copy is a tour of its own: its line, measures, settings and
control points, without days, without its stops' links to places of the
other trip and without the obstacle decisions taken there; it keeps the
import record of its line. A copy that fails leaves nothing behind.
Where it came from is kept as text (tours.taken_over_from_trip_title and
taken_over_from_tour_name, migration 045100), not as a pointer, and read
back in the provenance as takenOverFrom; a copy of such a copy names it too.
The in-trip copy (P2C-07) and the take-over share one copy routine.
MCP: list_tour_library and take_over_tour, over the same service and
checks. The repository tests follow the hiking preferences column of MF-08.
While a hike is planned, the planner's map switch offers "Hiking" beside the
map, topo and satellite: OpenHikingMap, with marked trails over the terrain.
It is a choice of the planner's view alone, like topo: the global map
setting, the tour and its days stay as they are. With no tour open, over an
import viewed as it came in and for a paddle tour it is not offered, and a
choice made earlier falls back to the standard map there.
openmaps.fr's tile usage policy is followed: tiles load only as the map
shows them, with the browser's Referer, from the server's own caching; no
service worker rule keeps them and the 3D flyover's warm-up passes their
source by. Its credit and donation link are on the map; the 3D map, whose
attribution is folded away under the panel, shows them as a line of its own
above its controls.
The service is best effort. A run of failed tiles while it is shown marks
the switch, with a tooltip and a status for screen readers that say it is
not answering and that the tour is untouched; one tile arriving clears it.
The tile health the seamark overlay had is now useTileHealth, shared by both.
The source is free for non-commercial installs up to 500,000 tiles a month.
tours_hiking_map_enabled is an admin switch under Tours (admin tours-hiking-map,
audited), on by default, for an install that is commercial or larger to
switch off until it has an agreement with the operator. /api/addons carries
it as toursHikingMap, true only while Tours is on.
Leaflet, GL and the 3D map read one table of the planner's raster bases
(tourRasterBases), so topo and the hiking map are drawn the same way.
tile.openmaps.fr is on the CSP's connect-src for the GL maps.
A hike can ask the router for more than its difficulty limit: avoid steps,
avoid ferries, prefer footpaths, shorter over faster. They sit under the
limit in the planner's details as switches, each with what it really does,
and the info dot says they weigh the way and give way where there is no
other, and that none grades a path. Switching one plans the route again as
one step of the history, and the choice is kept in the draft.
Only preferences the public Valhalla was seen to honour are offered, with
the measured cases beside hikingCostingOptions: step_penalty took Würzburg
to the Festung from four flights to one, use_ferry 0 sent Kiel round the
Förde and Hamburg through the Elbe tunnel, walkway_factor moved Garmisch to
the Partnachklamm onto the paths, shortest cut the way to the Eckbauer.
use_hills and use_tracks showed no effect on foot and are left out, as are
marked, paved and rough ways, for which the router has no option.
tours.hiking_preferences (migration 045000) holds them as JSON, NULL for
none, so no tour saved before routes differently. Only a hike keeps them;
a paddle tour naming one is refused. A copy carries them, and list_tours
and get_tour_plan read them.
The trip copy's waypoint links now follow the copied places inside
TourWaypointsRepository.insertForPlace.
A tour's waypoint can stand for a place of its trip, chosen on purpose from
"Trip places" in the planner: searchable, nearest to the tour first, grouped
into near the tour and the rest, and a place already in the tour says so. A
pick adds the stop on the place's spot as one step of the history; the row
names it after the place and says it is a place of the trip. The point keeps
its own coordinates, the place stays a place of its own and its days are
left alone. Moving the point or "Unlink from the place" drops the link;
removing it never touches the place.
tour_waypoints.linked_place_id (migration 044900) references places with
ON DELETE SET NULL, so a deleted place only unlinks. A save checks the links
inside its transaction: a tour of the trip is refused, a place that is gone
or of another trip leaves the point unlinked, the same either way. The trip
copy points the links at the copied places, the GPX export writes the linked
stops as named waypoints, and get_tour_plan names them.
nearnessToLine in @trek/shared measures a point against a route, for the
picker and for the search along a route that comes next.
A saved tour now has a technical revision, raised inside the transaction of
every write that changes it: the route and its controls, the plan laid onto a
recorded paddle track, going back to that track. A write that names the
revision it was based on (expected_revision) is refused with a 409
{ code: 'tour_revision_conflict', revision } before anything of it is
written, so a stale draft never overwrites a newer tour unseen. A write that
names none writes as before, so older clients and queued offline writes keep
working; the queue never carries a base. A copy starts at 1, a source's
version stays provenance. Migration 044800 adds the column; list_tours and
get_tour_plan read it.
The editor follows the trip's tours live: a newer revision of the open tour
loads at once while the editor has no changes of its own, and shows a notice
while it has. A refused save keeps the draft and asks: save it as a new tour,
load the newer version, or overwrite on purpose.
useTourPlanner was at the size limit; its derived facts, undo history and
draft storage move into tourPlannerFacts, usePlannerHistory and
useTourDraftStorage, unchanged in behaviour.
A saved tour can be handed over as a GPX file on purpose: its whole saved
line as one track with the heights it has and none it lacks, its name,
description and link, and the activity in <type>. The file is named after
the tour. A tour without a line of two points is refused with 422 rather
than written as a file that imports as nothing; the export changes nothing.
GET /api/trips/:tripId/tours/:placeId/export.gpx, readable by anyone who
sees the trip, and the MCP tool export_tour_gpx with the same rules. The
tour detail gets a "GPX" action beside the navigation, the planner head a
download button that waits while the tour has unsaved changes.
The tours rail head now uses the same plain icon buttons as the editor.
The notices to the admins brought NotificationsModule into PaddleObstaclesModule, which needs RealtimeService and opens the storage registry at init. The suite now mounts RealtimeModule with a FakeRealtimeService, as the tours and wanderer suites do, and its DataPathsService stand-in names an uploads and a backups folder in its temp dir.
Paddle tours are planned on the water by TREK's own router: a water network
per paddle region, built from the same Geofabrik extract as the obstacles and
searched in a worker thread of the server (no sidecar). Rivers, canals and
lakes (direct or along the shore), portages round weirs, locks by policy,
whitewater by boat, gaps marked. Found portages and locks become points of
their own; an unplannable leg says why and offers a way out.
- Shaping points: a click on the line sets a point that steers the route
without being a stop (hikes and paddle tours); recompute a single leg.
- Lake style direct/shore, suggested from the wind forecast.
- Regions load by themselves where a paddler plans (admin setting: automatic,
on request, off; size cap and a daily count), with requests for the admins,
a notification, and the load followed on the leg.
- Portage from the last point, portages follow footways via the walking
router (or stay straight), "put in here" on slipways and put-ins.
- MCP plan_paddle_route with the REST route's rules.
PAD-06 and PAD-09. The tours list carries the check bench of every paddle
tour and the detail its whole checklist, worked out of the obstacle data
along the tour's line and the decisions stored for it. The obstacle data is
read along the line run by run and kept in memory under the line, the boat
and the data version, so a list of a trip reads it once; a hike costs
nothing. While the data cannot be read the checklist says so and keeps every
decision visible.
PUT /api/trips/:tripId/tours/:placeId/obstacle-reviews stores what the
paddlers decided, each against the basis the user saw, and answers the
detail. It needs place_edit, refuses a tour that is no paddle tour with a
400, waits with a 503 while the data cannot be read, and skips an obstacle
no longer on the checklist instead of failing. A copied tour and a copied
trip take their decisions along. The MCP read tools describe the new fields;
there is no write tool, since a decision is a statement of the paddlers.
The obstacle data keeps the dates of checks on site, covers a line by
sampling it, and tells its version by its rows and regions.
PAD-05B: a click on an obstacle on the map or on the route band opens its card in the look of the via ferrata card: the kind with its glyph, the name, how it stands to the route (on it at a distance along it, near it with the link marked unclear, or only in the area), the paddling rule its tags give with canoe read before boat, a condition as written, height, grade, hours and fees, the source with the date of the data and the OpenStreetMap link. A missing rule reads as unknown, never as allowed, and a portage way recorded as private says so. Objects only in the area show from zoom 13 on, on Leaflet and GL alike; on GL the lines only near the route are dashed as on Leaflet, one click handler picks the marker over the line, and a picked marker no longer flickers. The route band marks the obstacles on and near the route by their share of the measured line. The obstacle notice also names an answer cut at its limit.
PAD-05A: the admin area gets a Paddle water data card under the addons, on desktop and phone: a search in Geofabrik's list with each region's path, the regions with their state (waiting, reading with its progress, ready with objects and data date, failed with the reason), reading again and removing after a confirmation. The list follows a read without reloading. Region changes write audit rows.
Map colours of paddle objects and portages come from theme tokens read at draw time, as the via ferratas do; the ferrata layer now shares that reader. The rail takes the planner page's parts as one bag, the map hit tests of the tour layers are one helper, and the unused noWaterData string is gone from every locale.
The PBF reader streams the extract and refuses a varint longer than ten bytes; the block offsets are read as the plain int64 the format defines. Region reads queue without loose promises: a region queued while another is read is still picked up, removing a region calls its read off, a shutdown stops the read under way and the next boot queues it again and clears the download folder. The admin list shows how far a read has come.
Geofabrik is asked only on its own servers, redirects included, and an outage of its list answers 502 instead of an unknown region. Nested ids such as us/texas are accepted.
A region being read again or after a failed read still counts with the data it holds, a region without a boundary spans its objects, and an object two overlapping regions hold is answered once. Stored geometry, tags and boundaries go through the JSON column declarations. An obstacle is related to the route both ways, so a long weir passed in its middle and a route inside an area count.
Tests cover the reader with extracts written in the test, the tag rules, the extraction and lock grouping, the geo helpers, the Geofabrik client, the region queue, the read side, both controllers, the job, the repositories and the HTTP routes; the domain gets its coverage entry.
PAD-03 portages and locks on planned tours and recorded tracks, PAD-07 paddle time with portage and lock stops, PAD-08 wind forecast for the start, PAD-05A regional obstacle import from Geofabrik extracts with admin endpoints and a monthly refresh, PAD-05B first cut of the obstacle layer on Leaflet, GL and 3D. Work in progress: checklist (PAD-06), check bench (PAD-09), admin UI, translations and tests follow.
- Paddle as a plannable tour type: one boat (kayak, canoe, SUP, other), river or
lake, a pace that a boat change never overwrites; time is distance over pace
- Hand-drawn legs beside routed ones, drawn dotted and labelled as not routed,
kept through save, reopen and edits elsewhere
- Reverse a tour and close it back to its start, each one undo step
- GPX import shows a preview first (line, measures, duplicates, type) and only
the confirmation stores the tour
- Base maps and overlays per tour type in the planner: hike keeps topo and the
via ferrata layer, paddle gets the OpenSeaMap seamark overlay
The repository stubs of the tour service tests answer findProvenance, which getTour and createTour read since P2C-02.
Switching the Tours addon off now ends live MCP sessions like every other addon that gates a tool (MCP-GATE-PARITY-001).
copyTour refuses a line without a point instead of placing the copy at 0/0, and new tests cover the reachable paths
of the copy, the source check and the provenance of a snapshot without its import record, including a trip copy
keeping that record. On the client the shared day assignment hands the plan exactly the tour and the day, the new
visibility store is reset between tests, and the tests of the sidebar, the detail, the phone sheet and the origin
section match the views this PR built.
- P2C-02: tours record their origin (planned, GPX with file name, wanderer)
instead of reading it off their shape; the detail answers a provenance
contract and a trip copy keeps a tour's import record
- MF-03: a wanderer snapshot's source can be checked on purpose, read only,
with a confirmed reimport as a new snapshot
- PR1-18: every way of putting a tour on a day shares one set of rules
- PR1-07/08: each person can hide tours from the trip map; the list shows
each tour's line colour and the picked tour stands out on both maps
- unit suites for WandererService (every refusal and fallback), the
wanderer connection and tour source repositories, and restoring a
recorded track (GPX and wanderer imports, empty or missing track, 404s)
- client cases for a body that breaks off and the trail count fallbacks
- an import whose realtime notification fails still stands (e2e)
- the search controller passes the validated body on; the schema already
defaults q and page, so the fallbacks there could never run
- tours locale key count, entity count and NOT NULL field count follow
the wanderer tables and strings
- the shared MSW admin handlers answer /api/admin/tours-wanderer
- the mobile tour detail test checks the dialog, not the dropped heading
- the refused-origin e2e sends one request per case instead of four at once
- GPX files drop onto the map or a day; the import lands on that day
- wanderer connection per user in Integrations; the workspace offers the
user's own trails only, behind an admin switch under the Tours addon
- wanderer difficulty is stored on the SAC scale (T1 to T3), backfilled
- a GPX or wanderer import can be planned as an editable tour, either in
place (the recorded track is kept and can be restored) or as a new tour
that remembers the import it came from
- rails, rows and detail dialog follow the plan sidebar's cards and badges
- admin addon shelves with more than one row fold, collapsed by default
- reverse-geocoded waypoint names are cached on the device
The tours map gets a 3D mode on the same map surface between the side panels:
a "3D" switch in the layer pill drapes the route over open Terrarium elevation
tiles (AWS Open Data), colours it by grade, plays a flyover tied to the
elevation profile in the rail, and keeps planning working by clicking and
dragging waypoints on the terrain. The corridor around the route is preloaded
before the flyover so the landscape never loads in front of the camera.
GPX imports no longer get a made-up hiking difficulty: max_hiking_difficulty
becomes nullable (new migration, waypoints kept), the import writes null and
the client shows no T badge for it. Drawn tours still default to T2.
Info hints in the planner show their tooltip only, and the discard
confirmation reads "Discard changes".
Journeys from the transit search are routing, not bookings, and a day of them
pushed the real bookings out of the six slots. Booked trains and buses keep
their own types and stay. The MCP tool reads the same feed.
The three planner view switches lived in sessionStorage only, so a new tab,
another browser or another device opened every trip on the plain view again.
They are now kept per trip in one user setting, planner_trip_views, validated
against a contract in @trek/shared. The server keeps only switches that are on
and only trips the user can still open, so a deleted trip or one the user left
drops out on the next write. The tab copy in sessionStorage stays and answers
until the settings have loaded.
Refs #2639
A guest's payer rows and recorded payments hung on the users row by ON DELETE
CASCADE, so deleting the guest wiped money that had really moved: expenses
they paid were left without a payer, settled payments reopened, and a custom
or receipt split lost the guest's share so the balances no longer summed to
zero.
Deleting a guest who paid for an expense or is part of a recorded payment is
now refused with a 409 (REST and the delete_trip_guest MCP tool, same text),
and the share dialog says to change the payer or delete the payment first.
Otherwise the guest's share is handed on: an equal split re-splits as before,
a custom amount goes to the others by largest remainder in the currency's
smallest step (members without an amount get one, so the expense stays a
custom split), and a receipt drops the guest from its lines and is split
again like the cost editor does. A legacy paid_by_user_id is cleared as on
account deletion. Account deletion goes through the same re-split. The
confirmation text in all languages and the wiki say what really happens.
Refs #2604
Creating the expense from a booking opened the editor on today, and the
cost a booking import writes by itself had no date at all, so it sat under
"No date". Both now take the booking's own date, else a hotel's check-in
day, else the day the booking sits on. The server sets it for every
booking write that creates a cost, so REST, MCP, plugin RPC and the import
agree.
A start time typed on a booking with no day picked no longer borrows
today's date on desktop. Today was mostly outside the trip, the server
then moved the booking onto day 1 while the list kept today. Desktop now
does what the phone already did and keeps the time without a date.
Refs #2604
The ledger nets every currency in hundredths, and the settlement handed those
hundredths out as they were. For a currency shown without decimals the panels
then rounded each balance and flow on its own: 10,000 KRW three ways read
+6,667 / -3,333 / -3,333, two flows of 3,333 sat under "You're owed 6,667",
and Settle booked 3,333.34 won.
The balances, flows and final budget lines are now allocated by largest
remainder in whole steps of the display currency (whole won or yen, unchanged
for two and three decimal ones), so the shown set adds up to zero and the flow
amount Settle sends is the whole amount on the row. The ledger, stored rows
and manual settlements are untouched. REST and the MCP settlement summary
share the same method.
Refs #2604
Moving a trip's start shifted the owner's vacay entries one row at a time,
checking each target against rows that were about to move themselves. A
block shifted by less than its own length kept its first days behind and
pushed the rest onto the weekend, even with weekends blocked.
The shift now decides every day before writing: a day whose target is a
blocked weekend or a whole company holiday is dropped, as is one whose
target already holds leave that is not moving; a half company holiday
leaves half a day. The rest move in the direction of travel inside one
transaction. The plan is the one the owner is active in, so a member of a
fused plan gets their days moved too, and a trip edit no longer creates a
vacay plan for an owner who has none. Open vacay views are notified after
the trip update commits.
The pure vacay helpers moved to vacay.helpers.ts and the trip window tests
to their own suite, so both files stay inside their size budgets.
Refs #2604
Removing someone from a trip leaves their payer and split rows on the
expenses they were part of. Every save ran the ids the form sends back
through the roster filter, so an unchanged save dropped them, total_price
shrank to what the rest had paid and a custom split stopped adding up.
Ids already on the expense now stay allowed, as payer or as member, and
can still be taken off it on purpose. A new expense and an id that never
was on the expense are filtered as before (#1952). The paid ticks of the
split carry over a form save instead of being reset. REST, the plugin RPC
and the MCP split checks all read the same allowed set from the service.
Refs #2604
The create and update answers, the reservation:updated broadcast and the MCP
reservation tools all hand back the single booking read, and that read never
loaded reservation_day_positions. The day list puts a booking moved on a day by
that slot before its time, and the client replaces the booking with the answer,
so a booking moved on a day jumped back to its time after every edit until the
next reload. The read now attaches day_positions in the shape the trip list
already sends.
Refs #2631
A stop with a start time but no end time went out as a VEVENT without
DTEND. Calendar clients fill in their own default length for that, mostly
an hour, so a 20 minute stop showed up as an hour. The event now ends at
start plus the place's duration_minutes when that is set and above zero,
carried over midnight like the stay markers. An explicit end time still
wins, so start and end under an hour stay as they were. The trip download,
both calendar feeds and the MCP export share this builder.
Refs #2641
Moving a saved place to another list takes it out of the source list, but
updatePlace only asked for edit rights there, so an editor could empty a
shared list they may not delete from. The source now takes owner or admin,
like a delete, and the target still takes edit rights. REST and the
update_collection_place tool share the service path. The Move to list
action on desktop and phone follows the delete permission.
A mechanical prettier --write over server/src, server/tests, server/scripts
and shared/src with the workspaces' .prettierrc; nothing but layout and
import order changes, and every file keeps the same set of imports. shared
is formatted throughout and its format baseline is empty. The server
baseline keeps the 35 files that Prettier would grow past their lint:size
limit (they need a split first, which is not a formatting change), and the
generated entity files stay as their generator writes them.
Maurice