Every journey map (the desktop aside, the phone screens and the shared page)
now carries four switches: Plan, Recorded, Entries and Photos, each with its
count, a spinner while it loads, the warning tone when it could not be read
and the reason when it has nothing to show. A switch only hides, in place:
the map is not rebuilt and keeps its view, and the choice is kept in this
browser per journey (per link on a shared page, by a hash of its token).
The plan draws the places the linked trips put on their days as hollow dashed
pins and the trips' GPX routes dashed; a place an entry was written about is
not drawn twice, the entry's pin carries a check instead. The stays a day
report was taken over from show as dots in the colour of their day. Marks on
one spot join into a disc with their number and open as a list; a picked
place or stay opens a card with its trip, days and times and leads to its
entry. A key beside the switches explains every pin and line and says that
a plan is no proof of a visit. The phone timelines now show the photos too.
The GPX routes come with the map's layers through the linked trips, read
only while the journey's track switch is on; the frozen /tracks answer stays
Studio's. The share settings on desktop and phone get Trip plan and Recorded
routes under Map, off by default and only switchable while the map is shared.
Journey Settings get "Prepare recorded days automatically" under GPX Tracks,
off by default and set by the owner. With it on, the Dawarich background
check also reads the linked trips of the journey for the owner and every
editor with a connection of their own, within the same 400 day reach and
windows as the trip sync, and only for new and changed stays: a trip the
person travels on is not asked twice, and the stays of a trip they are not
on are filed under no trip. Nothing is written into the journey; the stays
wait at their day, and a stay taken over or left out is never offered again.
Under the switch the caller sees when their stays were last fetched, or why
not (no connection, no dated trip, background check off, the reason of the
last failure beside the state still shown), with a "Fetch now" that the
switch also runs when it is turned on. A day of the trips that is not final
yet carries a dot on its take-over button, on the phone in the stay sheet,
and the tooltip says whether it is still running, was fetched before it
ended, was not fetched yet or shows an older state after a failed refresh.
The day review says so for today too.
Server: migration 046180 adds journeys.auto_prepare_recordings and
journey_recording_prep (the last attempt, last success and last error per
journey and person). JourneyRecordingPrepService in the journey domain lists
the prepared trips and keeps the status; DawarichSyncService walks those
trips in the same loop as the person's own and records each journey's
outcome. GET /api/journeys/:id/recordings/prep answers the caller's status
under a @trek/shared contract, the MCP tool get_journey_recording_prep reads
the same, and update_journey takes auto_prepare_recordings like the PUT
contract. The column stays out of the plugin output. All 27 locales carry
the strings; the Journey, Dawarich and MCP tool wiki pages describe it.
A journey on a phone with stays on days that hold no entry offers each waiting day in the Dawarich stay sheet, so a day can be built from its stays alone; desktop and phone read the same days through openStayDatesWithin. A position picked for a group falls back to the longest stay with a place once that stay is unchosen or split off, a merged entry of stays without a position goes out unpinned instead of being refused, and a stay taken over meanwhile is never joined across. review_journey_day_stays is no longer marked read-only, since it refreshes the caller's stored stays. The already-taken notice no longer claims the stays were in this journal. An e2e case checks the drafts stay off the public share.
A journey day now has a list button in its header beside the route, with the
number of stays still waiting, and the row of the day's Dawarich stays gets a
"Take over day" button; on a phone the journey's More options offers it for
the day of the card shown. The dialog reads the day again from the caller's
own Dawarich and shows the route and the stays on one map, numbered in the
order they were lived and pinned in the colour of the day, beside a list with
times, durations, the stays Dawarich only guessed or is unsure about, the ones
without a position, the entries the journal has on the day and how many people
will see the drafts. When Dawarich does not answer, it says why and shows the
stays of the last sync.
Open stays start chosen, the same place twice in a row starts joined as one
entry under a title and a chosen map position, any two neighbours can be
joined or kept apart, a name can be corrected and a stay left out. "Day
report" turns every chosen stay into one entry that lists them with their
times, at a chosen stay or off the map. The day's route can go along when the
journey keeps none yet. Nothing is written before "Take over N drafts", and a
blank name or title holds it back with the reason. Stays left out are dismissed
and can be restored in the stay list.
The take-over writes drafts only, never touches what the journal holds, and is
one transaction: every stay is checked to be the caller's and of that day, the
entries, the stays they hold and the marked suggestions commit together, and
the entries are announced after the commit. A stay the journey holds already
is reported instead of written twice, so a retry after a lost answer is
harmless; a failed attempt reads the day again and keeps the choices, and a
route that fails after the drafts can be kept again alone.
Server: migration 046170 adds journey_entry_stays (one row per stay of an
entry with its own name, place and times, unique per journey, source, person
and visit, gone with its entry), owned by the journey domain through
JourneyEntryStaysService. The single stay accept records its stay there too,
over REST and MCP alike. DawarichSyncService.refreshDay reads one day's visits
and upserts them without flagging anything missing; DawarichDayStaysService
lists and settles a day's stays. JourneyDayImportService in journey-recordings
serves POST /api/journeys/:id/recordings/:date/stays/review and /import with
@trek/shared contracts, and the MCP tools review_journey_day_stays and
take_over_journey_day_stays run on the same service and checks. createEntry
can write without announcing for a caller that announces after its commit.
The desktop dialog and the phone sheet of the route (JRN-01) and of the
take-over share one frame each. All 27 locales carry the strings; the Journey
and Dawarich wiki pages and the MCP tool list describe it.
A day header in the journey timeline now carries the Dawarich mark for an
editor whose Dawarich answers (dimmed with the reason while offline). It opens
a dialog that names the journey and the day and reads that one local day from
the caller's own connection: a sketch of the route, distance, first and last
time, pieces, gaps without recording, modes and whether tracks or thinned
points answered. The day is cut in the zone Dawarich records in where its
answer shows one, else in this device's, and a picker cuts it in any other.
Nothing is kept before "Keep route". On a phone the same sheet opens from the
journey's More options for the day of the card shown.
What is kept is the preview that was seen: the save reads the day again and
refuses with recording_changed when its hash moved, and the dialog shows the
new version. The same day taken over twice keeps one version and announces
nothing; a different version is replaced only on "Replace", never touching an
entry or text. A failed read throws before any write, so the kept version
stays. Gaps stay gaps: points are split where silence ends elsewhere, and no
day is joined to the one before. The dialog says how many other people will
see the route; editors may keep their own recording.
Kept days show in the day header (distance, whose recording, since when,
still running) and on the desktop and phone journey maps in the colour of
their day's pins, winning over the live trail of their date, and stay drawn
without Dawarich. A trip's GPX track is now drawn dashed as the plan, recorded
routes solid. Shared links do not show recorded days. Remove route asks first
and works without a connection.
Server: migration 046160 adds journey_recorded_days (one row per journey,
local day and source, segments as JSON, zone, window, fetch time, hash,
importer kept past their account). The journey domain owns the rows through
JourneyRecordedDaysService; the new journey-recordings domain takes a day
over through DawarichTracksService.fetchDay, which reads past the cache, asks
a window wide enough for every zone and refuses with DomainErrors. REST under
/api/journeys/:id/recordings (list, preview, PUT and DELETE /:date) with
@trek/shared contracts, and MCP list_journey_recorded_days,
preview_journey_recorded_day, save_journey_recorded_day and
delete_journey_recorded_day on the same service and access. A new user event
journey:recording:updated keeps every open map current. JourneyTrack gains an
optional kind. All 27 locales carry the strings; the Journey and Dawarich wiki
pages and the MCP tool list say what it does.
The pair rule wants TourDayAddButton to import stageSpread; the items it
builds belong there anyway. The addon manager test answers the Tours
switches, so a failed list is the only thing that toasts.
The vias the spread keeps on their legs are taken over in a layout effect
instead of during render, the route redraw takes the planner's async
updateRouteForDay, and the menu items for whole or stages move out of the
button component into their own module. Two leftovers of the old day pills
in tourParts go. The hook test's reanchor reloads the vias like the real
one does, and the detail test finds the button by its label, Add to Day.
Spreading a multi-day tour wrote through the store directly and skipped
the via re-anchoring every other write on the plan does. A tour with a
start counts as a road-trip stop, so taking the whole tour, a stale stage
or a moved stage off the middle of a day shifted every later stop, and the
vias anchored by position shaped the wrong leg. The undo had the same gap
when it put the whole tour back mid-day. Each stop a spread or its undo
takes off a day now carries the day's vias along (reanchorAfterRemove),
and the whole tour put back carries them the other way
(reanchorAfterInsert). The stops are read from the store as each write
goes out and the vias are kept as the last correction left them, since
one run can touch a day twice before the plan renders.
The phone's place sheet greyed out a day that holds a multi-day tour, so
its stages could not be spread from there. It now checks the day the way
the desktop menus do and leaves the choice to the plan, which opens the
card with only the stages offered.
The second step of the day menu names the day picked, and a greyed-out
"Whole tour on this day" says why right under it. The toast for a tour
that sat whole on several days now says "days" instead of "day", in all
27 languages.
Putting a multi-day tour on a day through any of the usual ways put the
whole tour on that one day. Now the way it goes on is a choice: the whole
tour on this day, or stage 1 on this day and each next stage on the next
day of the trip.
The day menu of the tour lists and the detail's "Add to day" ask in the
same menu, as a second step after the day; a tour dragged onto a day, or
added from a place where no menu asked, gets a small dialog on the desktop
and a card on the phone. Only the trip's days are used: when fewer days
are left than stages, the menu says up to which stage fits and the rest
stay without a day. A stage already on a day moves to its new day, the
whole tour comes off the days it was on, and a stage the route no longer
has comes off too. The writes run in order through the store, the repo
and the mutation queue, so they work offline, and one undo takes the
spread back, the whole tour onto its day again.
The plan lives in stageSpread.ts, the writes and the question in
useTourDayChoice, which every way onto a day now passes through on both
the desktop and the phone.
The unused day pills go, a client-only type stops being exported, the place
form context moves out of the page hook so its view model stays the first
object it returns, the place form test helpers split the stub component
from the plain setup, and four router files are formatted.
The place form's time section moves into PlaceFormTimeSection, its tour test
into PlaceFormModal.tour.test.tsx over a shared tests/helpers/placeForm setup,
the page hook hands the place form its close, day plan and tour, and the day
plan's surface classes and tones move into dayPlanSurfaces. The size baseline
drops to the new counts.
The saved ski route compared against an undefined skiKey, so opening a saved
ski tour threw. The held seed now lives in useSavedSkiSeed and is matched by
skiRouteKey(skiChoice). The ski route facts move to skiRouteFacts.ts so the
summary and leg rows only export components, the rail renders
SkiPlannerSummary, and openTour, useTourRoute and useAddonManager shed the
branches and lines the new ski code had added.
A saved ski tour now opens with the line, heights, time, build and
planned legs it was saved with, read from the place this device keeps,
and nothing is asked of the piste router until a point, an option or the
discipline changes. Opened offline, while TREK Places is down or with
piste routing switched off, it no longer turns every leg straight, and a
rename saves the planned tour as it was. A kept line whose length is not
the tour's is another save's, and the tour is planned afresh.
- the save names the legs the router planned (ski_planned_legs, checked
against the tour's own legs); get_tour_plan reports each leg routed or
drawn from them instead of from the build alone, a tour that names none
counting as planned only with the router's time
- copies keep ski_options in every path: in the trip, taken over, kept
in a collection and made from one (collection_tours gets the column in
the same unshipped migration)
- the route summary shows the data build, the km of runs, the height
skied down on them and the lift rides, and the credit the server sends
in place of a fixed one; a tour opened as saved says so
- answers refused while piste routing is off, or planned on an older kept
copy, are not remembered, so they are asked again later
- terrain heights between known ones are filled in one walk along the line
- i18n: five summary keys in all 27 locales
A ski tour with a discipline now sends its legs to the piste router and
takes back runs, lifts and trails: each stretch is coloured by its grade
in the area's scheme, links and lift rides down are dotted, and a leg the
router cannot plan stays straight and unrouted with its reason and the one
change that would plan it. Snowshoe and winter hike legs off the piste
data follow summer paths instead, said so. The router's time and heights
are used once every leg is planned, and the options, the build and the
time are saved with the tour.
- skiRouteRepo and api: one request per tour, batched, remembered unless
the answer may change, offline legs failed as offline
- planner: router options per discipline, leg steps and failure rows with
fixes, a piste route summary, draft and reopen keep the options
- admin: switch for the piste router under Tours
- i18n: new ski keys in all 27 locales, ski info and time texts rewritten
Since the estimate rule, an import without its own time shows the worked-out estimate on the day plan tile, and the sidebar metrics lead with it. Add the estimate field to the RS-01 fixture.
Move workedOutEndHint and totalText into tourDayTimeHint.ts so TourDayTimeParts only exports components, render the collection row's type icon without a component made during render, and pass the chase camera's lens and scene as one view object.
The flyover asked wheel and pinch to zoom around the centre with enable()
on handlers that were already on. MapLibre returns from enable() at once
in that case, so the option never took and a wheel zoom still went to the
cursor before the camera pulled back to the line. Each handler is now
switched off and on again with the centre anchor, and the same way back to
the cursor on pause, stop and unmount. The map stub refuses an enable() on
a handler that is on, like MapLibre does, so the tests see the real anchor.
The GPX file kept for the share sheet was only dropped when the tour's id
or name changed. A route saved elsewhere arrives live with a new revision
and the dialog kept handing out the old file. The kept file now carries the
revision it was read at; a new revision drops it and fetches again, and a
file a tap kept is not shared for another revision.
The chase camera set a fixed zoom and pitch on every frame, so wheel,
pinch and the +/- keys were undone at once. It now keeps the zoom and
tilt of the user's latest gesture and only follows position and
bearing. While a zoom is still easing the flyover holds for those
frames, since any camera move would cancel the gesture. Wheel and pinch
zoom around the rider while flying, and drag panning is off until the
flyover stops. Starting over returns to the flyover's own zoom.
Sharing a tour fetched the GPX file first and only then called
navigator.share, so the tap that asked had often run out by then. The
retry path kept that file for one more tap only, and a tap while a sheet
was still open made the browser throw InvalidStateError, which read as a
failed share.
The share button now fetches the file ahead where sharing is offered
(not while the planner has unsaved changes), and every tap hands a fresh
File built from the kept bytes to the sheet before anything is awaited.
A file a tap had to fetch is kept for the next tap. A tap while a sheet
is open is let be, and InvalidStateError and a closed sheet stay quiet;
only a real failure still says the download is left.
The get_tour_plan description named the estimate of a tour "such a field"
right after the values of a recording, so it could be read as one of them.
It now follows the sentence on derived fields and says outright that it is
one of them, worked out from distance and heights or the pace of a run.
The arrow between a tour's start and end points from the start to the end
in a right-to-left language as well. A tour just added to a day, which
carries no tour_place_id until the next refresh, now says its overrun like
the row above it. A phone row of an import with a total the travellers
entered shows that one time, the estimate joining its words as on the
desktop. The German overrun line reads naturally without an item name.
A tour on a day had no place in the day's timeline: its time was not tied
to the slot it was planned in, so several hikes on one day could not be
lined up. A tour now sits there the way a place does, on the times of its
day entry, one model for every tour type. With a start and a known time
(the planned total, else the estimate of an import) its end follows as the
start plus that time; it is shown fainter, marked with an approximate sign
where it comes from an estimate, and says in its tooltip how it was worked
out. An end typed by hand wins. A day that holds one stage of a multi-day
tour gets no end from the whole route.
When the end runs past the start of the day's next timed item, the row
says so in one quiet line, as a late connection between two city walks
does; nothing is moved. The existing time fields of the day entry, on the
desktop form and the phone sheet, say what the end works out to while none
is typed. City walks keep their arrivals per station. The logic lives in
one module both day plans run on.
A hike imported from GPX, KML/KMZ or wanderer had no time at all, so
several hikes on one day could not be planned against each other. It now
gets the walking time the planner times a hike by (DIN 33466), worked out
from its own distance, ascent and descent; a run gets its distance at the
pace entered. Without heights in the track the time is unknown rather
than the time on the flat, and types timed by a router, by a speed of
their own or by nothing get no estimate.
The estimate is derived on every read and never stored, so tours imported
before get it too and no stored or entered time is touched. The rule moved
to @trek/shared, where the planner, the client and the server read it.
The tour list, the day rows on desktop and phone and the tour detail say
it as an estimate, apart from a planned total; list_tours and
get_tour_plan carry it as time_estimate and name it as derived.
The times fill their row when there are two, the trip days are boxes in
the look of the measures with the date under the day, the footer's
collection button carries its label like the others and the copy button
says Copy, and the name field keeps its distance to a save button as large
as the close button.
Maurice