The panel button is named "Filters" like the map control, its badge counts
kinds of filter through countActivePlacesFilters (the pool, shown as chips
above it, stays out), and picking a rating floor clears the selection as
picking a pool does.
MChip only showed its state through colour. A pressable option renders
aria-pressed from active; the places filter's Show and rating floor chips use
it, and the tests now check the chosen chip by its pressed state.
MapTogglePill always set aria-pressed, so the phone map's Filters control read
as a toggle although it opens a sheet. An opensDialog option drops aria-pressed
for aria-haspopup="dialog"; the other map toggles are unchanged.
The fallback from "Tracks" to "All" once the last track disappears lived in
the desktop sidebar and the phone places browser, neither of which is mounted
while the phone map is in front: the map could sit empty under a filter no
control offers any more. useTripPlanner now owns it, once, for every screen.
On a phone the only way to narrow the trip's pins was to leave the map for
the places list, and the rating floor could not be set at all. The phone map
now has a round "Filters" control at the foot of its right-hand stack, badged
with how many filters are on, opening a sheet with the pool (all / unplanned /
planned / tracks), the minimum rating (the desktop list's floors), the trip's
categories including "no category", and a reset. It is hidden on the road trip
stage, which draws its own pins.
The places browser's filter panel gains the same rating floor; its category
rows move into MPlacesFilterControls so the panel and the sheet share one
copy. Everything writes the trip store, so list and map stay in step.
MapTogglePill takes an optional count badge.
The minimum-rating filter lived in the desktop sidebar's local state, so it
only ever narrowed the desktop list: the map markers and the phone's places
list ignored it. It now sits in the trip store beside the pool and category
filters, and one module (utils/placesFilter) holds the pool, category and
rating matchers that the desktop list, the phone list and mapPlaces all use,
instead of three hand-copied versions of the same checks.
overflow-wrap:anywhere alone lets a long URL wrap inside a flex row; break-words
is overridden by it and word-break:break-word is deprecated. MarkdownText already
gets the rule from .collab-note-md, so its call sites drop the duplicate.
Admin > Notifications gets a Defaults for users matrix: each event and channel starts On, Off (a user may still turn it on) or Blocked (off for everyone). A user's own choice is kept against the default, and a value equal to it is stored as no row, so a later change of the default reaches everyone who never chose. Blocked cells show as locked in the user settings on desktop and phone, and the server ignores any attempt to turn one on. (#1536)
The 50 MB limit for files, booking attachments and note attachments becomes FILE_UPLOAD_LIMIT_MB, 50 by default. The server hands it to the client through the app config, so the upload dialogs refuse a file over it up front and say what the limit is; on desktop a file over it no longer vanishes without a word. (#1364)
While a trip is running, today's chip on the phone carries a ring and a dot, and a button beside the rail jumps back to today from wherever it was scrolled, in the plan and on the map. It stays in place, dimmed, while today is open, so the rail never shifts under the thumb. (#2392)
The phone's collection place sheet gets the Navigation button the desktop detail and the trip's place sheet already have, first among its actions: one offered app opens straight away, more open the same picker. (#2091)
The handles on the day plan and the places panel only listened to the mouse, so on an iPad they did nothing, and in the portrait band they were left out. They now follow a finger as well, show a grip on touch screens, keep the page and the map from taking the gesture, and stay in the narrow layout within the room the map needs. As separators they also move with the arrow keys. (#1012)
The public journey page drew the old "Powered by" block above the shared
frame's footer, so the credit showed twice; only the shared footer is left.
Its tests read the new frame: the title in the hero, the counts in the hero
pills, the loading skeleton and the cover as an image.
The shared trip tests look for markers inside the map, since the unplanned
card names the same places. The place form clicks the search button by name,
now that a picked place adds the nearby button to that row. The journey
editors send the photo order as one PUT, so their tests follow that request,
and a refused order rolls back as a whole. Payments carry their note, and a
saved mobile entry carries its draft flag.
nodemailer goes to 10.0.13 and brace-expansion to 2.1.7 for the advisories
Docker Scout reports (CVE-2026-102276, CVE-2026-102278, GHSA-v53p-9fqp-m79j).
A double tap counted every lift of a finger, the end of a swipe included, so
two quick swipes zoomed in. Only a touch that stays in place is a tap now.
The client tests follow the fields and arguments the qol sweep added.
The hand-written e2e schemas gain the new columns and place_regions, and the
unit assertions take the new arguments and fields. The Public API page names
GET /api/auth/app-config for the running version.
Small requests from the discussions, each built end to end: planner and
map (cycling mode, date first headings, clear a day, stay times per day,
off-route stops, map lock, compact unplanned markers, pending stays,
cable car, transit quick picks), places (location filter, category from
OSM, open in maps, geo: link, image from an attachment, enrichment on
file import, places near a pin, place name language, Amap first in
China), lists and costs (packed counter, inherited sharing, Markdown
to-dos, payment notes, bookings CSV, my plan PDF), sharing (unplanned
places, travel only, without photos), journey (photo zoom, drafts,
photo order, trip suggestion, day jump), atlas (region counter, region
bucket list, places per country), vacay half company holidays, studio
copy and paste plus the book's own layouts, and RESTORE_FROM_BACKUP for
a first start restore.
The phone booking and transport sheets collect picked files and upload them
after the save, but only when the record was new. Editing an existing booking
showed the picked files in the sheet, then dropped them on Update without a
word. The upload now runs after every save that comes back with a record,
through one helper both sheets share. A save that fails uploads nothing.
Closes#2534
The day pills, Total Cost at the foot of the plan and the same figures in
the PDF added up the price column of every planned place. No form sets
that price since expenses replaced it, and nothing in Costs changes it,
so deleting an expense left the plan's total where it was, and a place
planned on two days counted twice.
With the Costs addon on, the plan now adds up the expenses: each one once,
on the day its booking starts, else the first day its place is planned,
else its date, and in the total either way. A foreign expense counts at
the rate frozen when it was entered and a refund nets against its day,
so Total Cost matches Total trip spend in Costs. With Costs off, a
place's own price still counts, once per place.
Closes#2551
The export dialog was the last popup on the old card: it is now the shared
dialog frame with its options as rows, and it takes Escape for itself so
the key no longer reaches Studio behind it. Its stylesheet goes.
The Atlas country card printed the flag emoji, which Windows draws as the
two letters of the country code; it uses the shared CountryFlag now.
The redesigned share page reads collapsedDays, toggleDay and pickDayOnMap
from its hook; the map test's stand-in left them out and every case there
failed on the missing set.
The Plan tab was the last trip tab still in the old design. It now reads
like Bookings, Costs, Lists, Files and Collab, without losing a function:
- Day plan: each day is a card with a head band (day tile with weather,
stay and rental pills, a "+" menu for place, stay, transport, transit
and note), rows with "..." menus, white badges and a white route bar.
- Places column: add, search and filters in three rows, a show dropdown,
category and rating filters, and a selection bar at the foot.
- Place inspector, day details and the stay editor on the shared dialog
frame; the place form in the editor look with the name in the head band.
- Clicking a booking or transport anywhere on the plan opens the booking
detail popup first; Edit leads to the editor. The popup is one host
shared with the Bookings and Transports tabs.
- Files and Collab dialogs, notes, polls, links and chat moved to the same
frame; shared DialogShell and dialogParts hold the building blocks.
- The map hover card shows the place photo and follows the theme.
Every new and reworded string is translated into all locales, and a few
older English leftovers (help center, cost split, import hints) with them.
Phone screens keep their own look.
A photo is now decoded only when its header says it is within 40 megapixels,
and bytes TREK cannot shrink, such as a WebP, are sent only up to 3.5 MB. A
scanned PDF page is drawn by its long edge, and pdf.js skips an embedded image
above the same pixel cap instead of decoding it.
The receipt reading is held to bounds in the shared contract, keeps the minus
sign of a discount and leaves such lines out so the Ticket split can save, and
its prompt states the JSON shape, so a server without json_schema still answers
something the parser reads. The model lookup sends the configured key, the
import error names the photo formats, the scanned photo is attached only for
someone who may upload files, and the phone settlement reloads after a receipt
is saved from the trip sheets. Test ids that clashed after the rebase are
renumbered, and the wiki describes the image setting, photo import and receipt
scan.
Whether the AI Parsing model reads images is an admin setting now, and it
lands with the two features that send a photo, so it has something to
control.
The setting is `vision: 'auto' | 'on' | 'off'` on the addon config. On
Automatic a local Ollama is asked what the model can do (`/api/show`), and a
cloud provider means no; Yes and No are applied as set. The old `multimodal`
flag is not read: the admin screens wrote it false on every save, so a
stored false meant nothing. The per-user toggle keeps its on/off meaning and
is read by the extraction now. The lookup is server-side only: capped read,
validated body, never throws, cached per server and model.
GET /api/llm/capabilities answers it for the signed-in caller, and both
photo pickers below ask it.
The booking import takes JPG, PNG and WEBP when the model reads images.
The photo goes as an image to every provider (image_url, an Anthropic image
block, Ollama's native chat with `images`), capped at 1600px, and skips KDE
Itinerary. A scanned PDF, which used to reach the model as empty text, has
its first two pages drawn by pdf-parse and sent the same way. The rest is
the import as it was: background job, review, the file attached to the
booking, the linked cost. On a real qwen3.5:4b a train ticket came back as
bare clock times until the router gave the model every type's field
meanings, and its price as an object inside a string, which read as 4900;
both are handled.
Costs gets Scan receipt: a dialog laid out like the booking import's takes
one photo, read on the import job queue, then reviewed in the existing
expense editor pre-filled with merchant, total, currency, day and lines,
the photo waiting in Receipts & Invoices to be uploaded on save. No table,
no migration, no category guess, no document-type detection.
A foreign expense without a frozen rate is converted with today's rate.
When the server could not fetch rates itself, it counted the amount 1:1
in the trip currency, although the browser had the rates all along. A
VND bill on an AUD trip was settled as millions of AUD.
Such a row is now left out of the balances, flows, final budgets, trip
totals and per-person summaries. The settlement reports it under
`unconverted` and says which currency its figures are in; the trip
summary lists the ids and the budget prompt says how many are missing.
The browser lends the rates it already holds (`fallback_fx`) when it
saves an expense or a settle-up transfer, and to heal existing rows
through the new POST .../budget/freeze-rates route, which an editor's
Costs view calls for the rows the settlement left out. The server still
prefers its own rate, uses a lent one only while it is quoted against
the trip currency, and never replaces a frozen or explicit rate. The
settlement also takes the browser's display rate (`base_rate`) in place
of a display quote the server cannot fetch; the browser leaves out a
figure the query would refuse. The browser's own fetch gives up after
10 s.
Changing a row's currency while no rate is available no longer keeps
the old currency's rate; the row goes back to unfrozen.
MCP gets the same through the new freeze_budget_rates tool, which only
ever pins the server's own rate.
A euro trip read in dollars books a bill entered in dollars at the rate
of the day, from the euro's quote: 12,345.67 USD at 1.1398 is 10,831.44
EUR. The Costs screen and the settlement then turned those euros back
into dollars with the dollar's own quote, 1 / 0.87732. Frankfurter
rounds the two quotes separately, so they are not exact inverses, and
the bill read $12,346.05 the moment it was saved, a $250.00 one $250.01.
The error grows with the amount, which is why the large rows showed it
first. Paying back what settle-up offered for such a bill left the trip
open with the debt flipped the other way.
Both sides now convert trip money to the display currency with the trip
currency's own quote, the one every entry rate is frozen from. On the
server, settlement() fetches that quote for the REST route and for the
MCP get_settlement_summary tool, which now makes the same call, and a
legacy transfer without a currency reads back through the same factor.
On the client, useExchangeRates takes the trip currency as an anchor
and converts through its cached quote, falling back to the display
currency's while it is missing, so it works offline from cache and
needs no change to the settlement response. The final budget builds
each row from the unrounded trip amount, because a euro cent is worth
more than a dollar cent and 10,831.44 EUR came back as 12,345.68; the
balances and settle-up still net whole trip cents.
A same-day bill in the display currency now reads exactly as typed on
the row, the payer chip, the day header, the totals, Outstanding and
the final budget, on both shells and on the shared trip page, and
paying the amount settle-up offers leaves both balances at zero. When
the rate really moved, the row keeps the value the totals count, with
what was entered and the euros it was booked at underneath, "$801.76 ->
685,26 EUR". One helper builds that line for the desktop list, the
phone list, payments, the final budget breakdown and the shared page;
it prints nothing for an amount of 0 or a bill that reads as typed.
The expense editors share one module for their preview. The split
summary puts the share the row lends or borrows next to the entered
one, "$400.88 -> $390.53 each", and an expense saved without a currency
still opens in the trip currency. Both CSV exports add the amount in
the trip currency when it differs from the display currency.
Kept from before: the desktop totals recompute when rates arrive, a
booking's linked costs are labelled in the trip currency (every linked
row, the link picker and the phone's linked costs), a legacy
transfer is read in the display currency, the shared page reads the
frozen rate in whole cents, a booking import keeps the currency it was
quoted in at a rate frozen before the write (REST and plugin RPC), and
the MCP trip summary, the budget-overview prompt and the per-person
summary add every row up in trip cents at its frozen rate. The
packing-list prompt reads the trip title directly instead of building
the whole summary, which could wait on a rates fetch.
The phone timeline only put a travel-time connector between two places.
The drive from the arrival airport to the first stop after a flight is
part of the day's route and drawn on the map, and the desktop day plan
shows it under the flight, but on the phone the two rows sat on top of
each other. The drive from the last stop to the departure airport was
dropped the same way, and so was every drive past a booking saved
without a location, like a taxi to the airport or a concert between two
stops.
buildPlanRows now walks the rows the way the route calculation walks
the day: a located booking ends the drive before it at its departure
point and starts the next one at its arrival point, and each leg goes
under the row it leaves from. The route rides straight past a booking
it has no location for, so the drive through it goes under that
booking, as on the desktop, and keeps the mode menu of the stop it
left. Only transport bookings count as located, as in the route
calculation. Two bookings back to back still get no road between them.
A booking whose station is the stop itself, as the transit planner
saves a journey between two of the day's places, leaves a leg of no
length, and that one gets no connector.
On a day that opens with a flight, where the traveller also put the
hotel on the day as a stop of their own, the phone timeline started the
day with a hotel row and the drive from that stop to the next place,
above the flight, and then showed the same drive again in its own spot.
hotelLegsForDay guessed the bookends from coordinates: the first
segment leaving the hotel's spot was the morning leg. The route had
correctly drawn no morning leg on that day, but the stop on the
hotel's spot starts a leg there too, so that hop was taken for it.
The route calculation now tags the two legs it draws from and to the
accommodation, and the timeline reads that tag instead. The hotel end
of a tagged leg still has to be the day's own stay, because the
calculation keeps the previous day's legs until the new day has
routed. The stop to stop connectors leave tagged legs alone, so one
leg can no longer show up in both places.
The public share page turned every failed GET /api/shared/:token into
"Link expired or invalid". A 5xx during a restart, a proxy 502, a rate
limit, a timeout or a viewer who is briefly offline all told the viewer
the link was dead and sent them back to the owner for a new one, while
the same link loaded fine on the next try.
The endpoint answers 404 with its JSON { error } body for an unknown,
expired or revoked token, so that is now the only answer that shows the
expired screen. A 404 without that body comes from a proxy in front of
TREK (Traefik answers "404 page not found" while the container is
stopped or still starting) and counts as a failed load, as does a 200
that is not the share payload, such as an auth wall's login page, which
used to crash the page. Any failed load shows "This trip could not be
loaded" with a retry button that refetches in place and stays busy
while it runs. The load also ignores a response that lands after the
page moved on to another token.
Both screens use the theme tokens instead of hex literals. New keys are
translated in all 27 locales.
After an update, a tab or a device whose service worker still serves the
previous build asks for chunks the update removed. The server answered those
requests with index.html and a 200, so the import failed with a MIME error,
and everything caching in between was free to keep the HTML as the chunk. A
precache install that met a missing file stored it, and Workbox reuses hashed
entries by URL, so the device showed "A new version is available" on every
load, whatever the reload or the cleared browser cache, and carried the broken
entry into every later release that keeps the file's name.
The SPA fallback now answers a GET for a build file that is not on disk with
a plain 404 (no-store) instead of index.html. A precache install refuses it,
so the worker whose cache is complete stays in charge until the new build is.
index.html is sent relative to the public dir, which also stops an install
living under a dot directory from answering every deep link with a 404.
On the client, the reload after a dead chunk (the automatic one and the
button on the update screen) no longer goes straight back to the worker that
served the broken shell. When that same worker is still in charge and the
server answers, its precache and registration are dropped first, so the
reload reaches the build the server runs now. Offline, and in offline mode,
the shell is kept. Every recovery reload, and the reload of the version
handover, asks for the page under a one-off query parameter, so a proxy or
CDN that keeps index.html against its headers cannot hand back the stale
shell either.
A chunk the entry imports statically fails before any of that code runs.
shell-guard.js, a small classic script loaded ahead of the entry, watches for
exactly that failure and runs the same recovery, once per session.
A stylesheet, font or icon that holds a page raises no error at all, so once
the app has started and the browser is idle, it looks through the precache
for entries that hold a page under a build file's name, fetches each from
the server past every cache and puts it back in place. A repaired stylesheet
is loaded again, and so are the app's stylesheets when a font was repaired,
since the browser does not try a face that failed again in the same
document. Only the headers are read, a precache found sound is not looked at
again until its entries change, nothing is fetched while nothing is broken,
and nothing happens offline, in offline mode or without storage. An answer
that is not the file (an auth wall, its login page, a server error) leaves
the entry for the next launch.
A page the recovery loaded from the network already runs the version the
server reports, so the version handover now records it instead of reloading
it a second time once the new worker takes over. A page loaded past an older
worker that is still in charge, as a hard reload does, still asks for the new
worker and records the version only once that has taken over, so the next
tab or launch cannot get the old shell without a handover.
Dropping the worker ends a Web Push subscription with it, so on such a device
the settings card shows push as off until it is switched on again. A missing
sw-push.js now fails the worker install with a 404 rather than index.html; the
comments that described the old answer say so.
Discussion #2084: a cost bought later (the seat upgrade for a flight) could
not be tied to the booking it belongs to, and a booking held one expense.
- The Costs block of the booking, transport and place forms lists every
linked expense with edit, unlink (the expense stays in Costs) and delete,
and offers the expenses that belong nowhere yet under Link existing
expense. The phone sheets get the same block in their own design, and
their Files row lists the attached files and links an existing one.
- PUT /budget/:id, update_budget_item (MCP) and costs.update (plugin RPC)
take reservation_id / place_id; create and update refuse an id from
another trip on all three paths.
- The booking's mirrored price is the sum of its expenses when they share
one currency (none counts as the trip's), else the first one, with that
currency, and follows every change to a linked expense. The booking
form's price field leaves a booking with several expenses alone.
- Deleting a booking deletes all of its linked expenses and broadcasts each
one, also from the MCP delete tools.
- Cards show the price with its currency.
- Booking and transport dialogs: Booking Type and Travelers as dropdowns at
the top, the URL beside Files (transports gain the URL field). The row is
one shared component; linking and unlinking files go through the store.
Help center pictures and texts for the booking, transport and expense
guides are redone in all 27 languages, five Costs labels that were still
English in 16 languages are translated, and the wiki follows.
The packing list bar gets an export menu next to the import button, both
now icon only. The menu prints the open view as a TREK styled page (trip,
dates, packed count, one card per category, bags), which the browser can
also save as a PDF, and downloads it as a Markdown checklist or as a CSV
in the exact format the import reads, bags included, so a list works as a
personal template without admin rights.
The import now also reads Markdown checklists: headings become
categories, "- [x]" marks an item packed, a "3x" prefix sets the
quantity and a "(200 g)" suffix the weight. The phone action sheet
offers the same exports through the shared usePackingExport hook.
The help center gets an export guide with new pictures, the import guide
and the wiki page describe the Markdown format, in all 27 languages.
Addresses discussions #1420 and #875.
A searchProvider plugin can now implement an optional suggest() beside
search(). Its places then show up in the place search's typed-ahead list,
after the core suggestions and marked with the plugin's name, on desktop
and phone. An index that cannot take a request per keystroke leaves it
out and keeps answering the full search only.
The child reports which functions each hook object carries at load, so
GET /api/plugin-search/suggest only asks the plugins that implement
suggest: from the second character, three rows at most across all of
them, 800 ms to answer. The feed marks plugins holding
hook:search-provider and the client only asks the route while one is
installed. A plugin row carries its whole place, so picking it skips the
details lookup, which knows no plugin id. The phone's search results now
name their source as the desktop ones do, and the desktop dropdown
scrolls instead of running past the dialog.
Addresses discussion #2221.
A new manifest capability poiCategories (up to 4, icon from an allow-list,
strict #rrggbb color) and the hook poiCategoryProvider.getPois behind the
hook:poi-category-provider permission. GET /api/plugin-pois in the plugin
contributions module answers them in the /api/maps/pois shape, with
search_plugin_pois as the MCP twin. plugin: ids no longer count as Google
place ids. SDK 1.8.0 carries the types, validation and docs.
On the map, one hook merges the built-in categories with the ones active
plugins declare, and the pill shows the plugin chips after a divider on
desktop and phone, scrolling sideways instead of shrinking a chip below
its touch target. A plugin chip searches through a repo that refuses
offline and parses the answer strictly. Its pins, on Leaflet and GL, use
the category's own icon and color, both checked again before they reach
any markup, and the hover card lists the plugin's details as escaped
text. A plugin POI can be added as a place like any other. The admin
panels on desktop and phone show a chip for the new permission and the
categories a plugin would add, from one shared module.
Addresses discussion #1781.
The photo picker's Select all took only the pages already loaded, 50 at a
time, and replaced whatever had been picked on another tab. It now loads
the rest of a day, trip or date-range search before selecting (cancelled
by closing the picker or switching tab), adds to earlier picks, and
Deselect all only clears what is in view. Add stays disabled until that
loading is done. The whole-library tab keeps selecting what is loaded and
shows the count as "N+".
A date-filtered Immich search stopped at 1,000 photos without a word,
because its page budget was absolute; it is now relative to the page
asked for, with an absolute ceiling of 270 raw pages sized so the
picker's deepest page still gets a full answer. Adds go out in batches of
500 ids, under the JSON body limit, and each batch is sent oldest first,
so photos land in an entry in the order they were taken. When a later
batch fails, the photos already saved are counted and the journey
reloads while the error still shows, through one hook for desktop and
phone.
After a provider add, the capture-time lookup runs at most four at a time
per user, shared by all of that user's batches. When it fills a row, a
journey:photos:updated event reloads open journeys once per batch, from
the REST routes and the MCP add tool alike. Device uploads, which arrive
one file per request, get the same lookup without the event.
Addresses discussion #1587.
A fourth built-in channel next to email, webhook and ntfy. Browsers
register per device, the server encrypts per RFC 8291 and signs per RFC
8292 with node:crypto and sends only to known push services through the
SSRF guard. The event matrix decides per category what arrives by push;
admins switch the channel on under Notifications.
VAPID keys come from the environment or are generated once, only while
neither stored row exists, and kept encrypted. A pair that does not
decrypt or match is never overwritten and never swapped for another one:
push stays off with an error in the log and every device stays
registered until the key is fixed. The subject is VAPID_SUBJECT, then an
https APP_URL, then the project URL.
Only chat messages collapse into one notification per trip, and a
replacement still alerts. A 403 removes a device only after three
failures in a row; 404 and 410 remove it at once. Password change, reset
and an admin setting a password drop the user's devices with the other
credentials. The request log redacts subscriptions and endpoints, boot
errors print *** for every secret variable, and logout forgets the
device with a plain fetch so an expired session cannot redirect midway.
Addresses discussion #894.
Settings > General > Language & region gets "Week starts on" (Monday,
Sunday or Saturday), and Admin > User Defaults a default for everyone who
has not picked one. Monday stays the built-in value, so nothing changes
for anyone who leaves it alone.
Both calendar implementations follow it: CustomDatePicker, used by trip
dates, bookings, costs, to-dos and the admin school holidays on desktop
and phone, and the journey date picker, whose weekday headers were
hardcoded English and now speak the app language. The grid math and the
header row live in one helper (utils/calendarWeek.ts). The day names on
the options come from Intl, so only the label and a hint needed
translating. Vacay keeps its own per-plan week start.
The value is validated like the other regional settings: VALID_VALUES for
admin defaults, the display-settings MCP tool, and the managed key list.
Addresses discussion #2029.
Translates the keys dev gained since the branch was cut, the help center
above all, and drops the six keys dev no longer has. Registers az
everywhere a language is listed: notification emails, the rate-limit
message, the placeholder check and the wiki. The two tests that counted
the languages by hand now derive the count from SUPPORTED_LANGUAGES.
The server already put PLACES_API_KEY ahead of the key saved in the admin
panel, but nothing said so: the variable was in no template and the admin
field kept showing a stored value that no search used.
GET /me/settings now answers env_keys, the variable behind each key the
environment sets (Google, Unsplash, Amap), and null for that key's value.
The admin field turns read-only and names the variable, Test still probes
the key a search resolves to, and a save leaves those names out so the
stored fallback survives. The variable is documented in .env.example,
docker-compose.yml, the Helm chart (as a secret) and the wiki.
Addresses discussion #1881.
The flight block in the road trip rail printed each fact two or three times: the booking
title in capitals with its duration cut off, the airport code three times per side, an
unlabelled 14:15 on the right with "Departure 15:15" under it, 17:20 twice, and a warning
"+9 h 39 min" measured against a check-in nobody could see, for a flight that was missed.
It now reads in four lines: the booking as typed; the two codes with their timetable clocks
and the ride between them; the places without the code in brackets; and the check-in as a
badge that carries its own state, the hour when the drive is on time, by how much when it
is late for the check-in, and "Missed, there at 23:54" when it gets there after the
departure, with the duration beside it. A missed ride edges the block and says so in the
day header, also when the day is folded. Trains and buses say boarding. The phone shows
the same, and its rows now read the lateness and missed-leave findings at all.
The stays at the edge of a day are named by the hotel, with the edge in a badge: Check-out
with the latest hour, Day start, Overnight, or Check-in with the hour the room is ready. A
plan that leaves after the check-out turns that badge instead of adding a line. They wear
the hotel stop's own disc, the stay's own stop shows its check-in the same way, and the
driving settings button shows when the stays are switched on.
The two-part badge the rail used in six hand-typed copies is one FigureBadge now, and the
airport code is stripped by one shared helper instead of two private copies.
The day dialog hangs from a fixed top edge, so switching to the delete
question only moves its bottom edge, and the question opens at its top
with the focus on Cancel. Cancel, Close and the quiet add share one
outline; the dated add is drawn in the accent instead of filled with it.
Dates in the dialog, its hints and the new-day toast read the way the day
list writes them, and captions use the muted text colour for contrast. A
stay booked twice is named once in the warning. On the phone the dated
pill shows only its date, so both pills fit side by side.
When the trip dialog asks both how bookings follow a moved start and
which days the new dates remove, the two now stand side by side in a wide
dialog instead of one long column.
Deleting a day no longer stacks a second dialog over the reorder dialog. The
dialog swaps its list for the question at the same size and in the same place;
Cancel and Escape bring the list back with the focus on the row asked about.
The foot is one row of normal sized buttons with the hint line above it, the
undated day is labelled "Without date" in every language, and the dialog is a
step wider so no label breaks. The list of what goes with a day is quieter: a
cancelled stay tints its whole row, a day with nothing on it is one plain line.
On the phone the add buttons are two pills under the scrolling list, and the
confirm sheet moves a long label to its own row instead of breaking it.
elmocito