A booking switched on with "On map" stayed drawn on every day of the
phone's plan map, so a flight from the first day crossed the map of the
third, although a day chip frames one day and drops the other days' pins.
The plan map now draws such a booking only on the days it runs on, the
arrival day of an overnight one included, and the all-days view still
shows every booking that is switched on. The switch itself stays
trip-wide, and the desktop, collections and the road trip stage draw
exactly as before.
"On map" in a booking's sheet now reads as on only where the plan map
draws the route. From any other day a tap takes the map to the booking's
day, switching the route on when it is off, instead of hiding a route
that is not drawn there anyway.
The phone settings also gain the "Always show booking routes" switch the
desktop already had. As on the desktop it sets the default for trips not
yet touched on this device, so a trip where a route was switched on or
off by hand keeps that choice.
Ride minutes and late marks follow an edited timetable instead of the routing
that fetched them; a landing day's join band reads as the ride it is rather
than a nine hour drive of no length; the refuel offer is there on the road
out of a terminal or a pick-up desk; the phone's stage map draws the ride;
the share page numbers its stops the way the planner does; the PDF lists a
day the way the day plan lists it, from both shells; a poster-less clip draws
its play badge everywhere, not only in the editor; the hero title has room
for its descenders and the list card keeps its badge clear; the release
notice keeps its close control in reach when it stacks; a link chip's actions
are thumb-sized and its delete asks first; the Google retry line and the
Google-only switch appear only where Google answers.
The moon pill marking where a travel day ends is back on the phone, filtered to the day
on screen. The markers are built from the whole drive, which is right for the desktop
rail and for the all-days view, but a stage draws one day: unfiltered, day 1 carried day
2's pill as well, sitting in the middle of a map that is otherwise entirely day 1. Two
ends on a map that draws one is a question rather than a label.
Off a stage the list is left alone, because in the all-days view every night does belong
to a line that is drawn. The plan tab is unaffected either way: its vias come from the
route calculation, which has no night pauses in it.
This is what the map lost when the pills were dropped altogether: on a day whose drive
ends somewhere other than its last stop, the pill is the only thing that says where.
It named the day's destination with its picture, its stop count, its arrival and the
stage distance, and it stood there for the whole of the road trip tab. The day and
the distance are in the shell's stage header already, and on a map that fills the
screen a permanent card over the bottom edge costs more than the three facts it
added. Tapping it opened the destination's stop sheet; the chain opens the same sheet
from the row that names it.
The slot stays for the one bar that earns it: while other ways of driving a leg are
on offer, the picker's bar stands there. That wrapper is now mounted with the bar
rather than lying empty over the map's own buttons the rest of the time, and the map
floor lifts only while it is up, so on the stage the round controls stand on the dock
like everywhere else.
A final pass over the feedback commits found two gaps in the phone map.
The planner keeps a point it was asked to show until its next routing
round, and once the fuel offers or the other roads for a leg close it hands
that very array back. MMapArea read it as a new focus, so closing either one
flew the camera to the stop "Show on map" had pointed at, on another day's
stage too. holdFocus now remembers the arrays it already held and only
takes a new one as a focus, with the open picker's own roads as the one
exception.
The all days view still took its pins from the planner's planned list,
which on a phone leaves out booked nights and hidden service stops, so the
drive ended at a hotel with no pin to open it from. It now reads the places
of the stored visits, like the stage does.
The desk offers alternative routes from the drive band between two stops;
the phone had nothing. A leg in the phone chain now carries one round
button that asks the router for other ways and switches to the map, where a
bar takes the stage bar's place: the ways as chips with their colour, time,
distance and what sets them apart, and a confirm button. On glass there is
no hover, so a tap on a chip or on a line only previews that road; confirm
writes it. The button shows only where the desk offers it (a routed leg
between chosen stops), for someone who may edit the day, and not offline,
since vias are written online only.
The picker could not have stayed open on a phone at all: the planner closed
it whenever road trip mode was off, and that mode is off on a phone by
design, so the next render shut it. The close now follows where the picker
can be seen (road trip mode on the desk, the road trip tab on a phone), and
useRouteAlternatives returns a memoised object.
The rules both shells need are shared: legReroutable in the row model,
alternativesPhase and alternativeSubline next to the overlays, and the desk
bar and sidebar read them too with no visible change. Both map engines take
an optional fitPadding, so the phone frames the leg between the day chips
and the bar instead of under them.
The credit button sat in the middle of the round controls band, beside the
locate button. On the trip map it now has the bottom right corner to
itself, a gap above the dock (or above the stage bar on the road trip
tab), and the band floats one credit row higher, so the switcher, the
compass and the locate button stay on one line.
MMapArea marks its layer as a credit corner and defines the floor the map
ends at; mobile.css places both GL engines' compact control there, keeps
an opened GL credit's button in the corner, moves the Mapbox wordmark into
the same row instead of under the compass, and unfolds the Leaflet credit
to the left of its button. MapAttributionToggle reads the same two
variables with today's values as the fallback, so the other phone maps and
the desktop keep their placement.
The bar over the road trip map names a place, but a tap on it switched to
the whole day's chain and the place never opened. It now opens that stop's
sheet, the one its row in the chain opens. Its name, clock and tap come off
one row (stageEnd), so the bar no longer pairs the destination with the
automatic day end's clock (Kyoto Station 22:00 while the head card said
12:40). The header's list switch stays the way back to the chain.
A pin on the stage went through the plan tab's marker click, which moves
the place selection and brought up the plan tab's place card. On the road
trip tab a pin now opens its stop on the stage card, or the first routed
visit in the all days view, and only a place no routed day stops at still
gets the place card. The handler keeps one identity for the life of the
map. "Show on map" in the stop sheet and the up next card move the camera
through focusRoadtripPoint instead of the selection, picking the stop's
card first when it is not on screen. A pending focus now lets go once the
day moves, so later stages frame their own drive again.
Stage pins come from the trip store instead of the plan tab's map list.
That list carries the plan tab's day declutter and place filters, so after
the all days switch and back most pins of the next stage were missing, and
the unplanned filter or hidden service stops removed stops the chain draws.
Two faults behind one round button on the phone map.
The base layer switcher that both engines draw in the bottom left corner
sat on top of the GL compass, which started 8px to its left and ran on
under the frosted shell, so it read as a second button showing through.
The compass now stands beside the switcher, placed off the switcher's own
exported inset and size so the two cannot drift apart again.
Satellite never drew on GL because applySatellite gave up whenever
isStyleLoaded() was false and only retried on styledata. That flag is false
while any source has tiles or a setData in flight, which on a phone is the
usual state, and styledata does not fire when those finish. On the road
trip stage every tap met a busy style, because the settings write
re-rendered the shell and handed the map fresh stage arrays. The guard is
gone (the pass only runs after load, and addSource/addLayer only refuse a
style document that is not in yet), an existing layer just flips its
visibility, and a source left without its layer still gets the layer.
The stage data in MMapArea is memoised, so a store write no longer refits
the camera or sets the route, access and place sources again.
A road trip tab on the mobile trip screen: the stage as a chain, the same
map underneath it, the sheets a passenger needs, and a search along the
route.
The addon was desktop only because road trip MODE is a data switch rather
than a view switch. It rewrites `assignments` and `places` for the whole
planner hook, and every mobile sheet is permanently mounted and reads those
same two lists, so turning it on there brought back documented regressions.
The mode flag is therefore untouched. A second flag, `roadtripFeedActive`,
feeds only the routing round and does it off the STORED assignments, so the
phone gets the drive without what the mode drags along with it.
The map is one instance shared by the plan tab and the road trip tab,
hoisted into a single JSX expression so React keeps it in the same position
and the WebGL context is never torn down on a tab switch.
The corridor search is scoped to what a phone can afford: a window of the
day rather than all of it, a smaller tile ceiling, a capped retry pass and a
deadline. The standard search is three requests where the desk makes
fifteen. The categories are deliberately not narrowed, because they all ride
one query per box, so a second one costs nothing.
Two gaps found while wiring it up are closed here as well. The fuel search
drew its offers nowhere on the phone, so the button did nothing visible;
they are in the dry band now, with the detour, the spare range and an accept
button. And the map credit opened as a two line ribbon across a screen the
map fills: both GL engines now start it collapsed, and Leaflet, which has no
collapsed mode of its own, is given one.
* @
feat(mobile): swipe the day details to step through days
The phone shell hangs the days off a chip rail pinned to the top of the
screen, which on a large phone is a thin target a thumb cannot reach one
handed. The day details fill the rest of the screen and did nothing.
They now take a horizontal swipe: left for the next day, right for the
previous one, with the panel following the finger, rubber banding at the
first and last day and springing back when the swipe falls short. The
chip rail is untouched and still the accessible path; a committed swipe
announces the day it reached through a live region, and the active chip
scrolls itself back into view once the rail overflows.
The gesture never calls preventDefault or stops propagation on a touch
event and sets no touch-action, so the browser keeps sole ownership of
the card scroll and of the header chip strip, and the long press reorder
bridge keeps its own 10px self cancel. In edit mode the swipe also
refuses to claim a press held past the bridge window.
@
* @
fix(mobile): line the map controls up and widen the POI bar
The compass sat on its own under the POI bar, centre top, while the
locate button floated 42px above the dock on the other end of the
screen. Both are one handed controls, so they now share the band just
above the dock: compass bottom left, locate bottom right, off the same
--bottom-nav-h the map already reads, a dock gap lower than before.
That frees the row under the chip rail, so the nearby places bar takes
the full width between the screen margins and its segments end up the
size of everything else the thumb aims at there. Desktop keeps the
floating, content width bar.
@
Maurice