A place closing at midnight is no longer read as open past it: the hours
run on only where the next date opens at midnight (any window of the day
counts, as written order is kept), and an impossible date such as
2026-02-31 reads as unknown instead of rolling into March. The hours
source names the trip's places rather than "your own" entries, in all
27 locales, as the pill beside it does.
The day a walk's arrivals are checked for shows its date on the pill,
not only "Day N". The 12 hour clock is tested for a window to midnight.
The along-the-tour term table is built once again, now that the one test
that stubbed the places client without its real exports spreads them.
New test seeding goes through the ORM factories.
Along the tour (PLN-02, PLN-03): the list shows one line per place (its
icon, name and distance from the route) and scrolls past ten. A place
picked in the list or on the map opens its card over the map, where the
other cards of the planner sit, with what the source says and the way to
take it in as a stop. What taking it in did is one line in the list. The
intro, the theme line and the out-of-date note are gone: the themes say
what they look for on hover, and the search button says when to search
again.
A stop taken in from there keeps the kind of place it was found as
(migration 045400, poi_category, read back only where the contract knows
the kind) and its number carries that kind's icon at the corner, as a
via ferrata's end does.
City walks (CW-02, CW-03, CW-10): a stay nobody entered says nothing.
While no stay is entered at all the walk is planned as its walking time,
with no "unknown" and no "at least". A must-see rings its number, an
optional stop has a dashed ring, a protected one a shield at the corner;
only the stay stays under the name, below the coordinates.
An assistant connected over MCP can now prepare a city walk from what the
traveller tells it. propose_city_walk takes a start (and an end), a time
frame on a day of the trip, the themes of CW-05, the stations the
traveller wishes for, the places of the trip it may use and fixed
appointments with their times, and saves nothing. Places for the themes
come from the search along a tour, at most eight, each with the theme,
category and source that brought it; nothing is made up. The stations are
ordered on estimates over the straight distance, and a place of a theme or
of the trip goes in only where it is open on arrival, keeps the frame and
the appointments, and leaves every station already on the walk open when
the walk gets there. The walk in that order is then planned on foot by the
router the road trip uses (the traveller's own routing server where they
set one), and its legs give the walking distance and time from one station
to the next. Where the router cannot be reached, or a station lies more
than 300 m off every way (the planner's limit, now shared with the
server), the times are estimates over the straight distance with an
allowance for streets at 4.5 km/h, and the answer says so and why. The
answer gives the arrival and leave times, the stay where the traveller
gave it and unknown otherwise, which makes every later arrival the
earliest one, and the opening hours checked against the arrival on that
day with the helpers the planner uses. Walking and stays are counted
apart, the total is complete only when every stay is known, and the
minutes the frame leaves for the unknown stays are named. Free time before
an appointment or at the end, wishes and appointments that cannot be kept
as asked, and places left out with their reason are listed; a tour of the
trip offered as a station is named as a tour. A wish or an appointment is
never dropped; an appointment is a must and protected. A place's default
duration is not read as a stay: every place carries one, so it says
nothing.
Once the traveller confirms, create_city_walk saves the walk through the
same creation the planner's save uses: one write, a key for every station,
the links to the trip's places checked, the trip told, with place editing
permission on the trip. Its way on foot is planned by the same router and
saved with the walk, together with its distance and walking time. Where
the router gives no way, the walk is saved with its stations only and the
answer says why: no line, no distance and no walking time. The tours list
says so (route_pending), the tour detail says in one line that the way is
planned in the planner, and opening the walk in the planner plans its way
at once and offers to save it, with a note once it is planned that it was
just planned. Such a walk can be saved as a new tour and taken over into
another trip, starting at its first stop, and is never offered as a place
to stay. A tour without a line needs two points of its own.
get_tour_plan now spells out every field of a city walk's stations: key,
name, stay (null when not known), importance (null for normal), protection
(false when not set) and opening hours (null when none are known);
list_tours names the station count and whether a walk waits for its way,
get_city_walk_progress gives each station's key and opening hours, and
take_over_tour says a walk keeps its stations with their protection. No
tool changes a walk's stations; deleting a walk's place takes its stations
along, protected ones included, and both delete tools now ask the
assistant to name those and ask the traveller first. REST answers the
stations as before.
A tour create refused for a type that is switched off, a description that
is too long or planned times out of range is a domain refusal now, so an
assistant gets the same text REST sends; REST still answers it as an error
at 400.
"Public transit" on the connector between two city walks in the day plan,
on the desktop and on the phone, now opens the existing search from where
the first walk really ends to where the next one starts, at the
coordinates the day's route draws, named after the first walk's last stop
and the next walk's first stop. A loop ends at its first stop again. A stop
without a name takes the name of the trip place it stands for, and a walk
whose stops cannot be read on this device names that end "End of" or
"Start of" the walk. The search opens on the walks' day and departs when
the first walk ends: its start that day, the time on the day's entry
before the place's own, plus its planned total, a total entered by hand
before walking and stays. The assignment's own end time is not used.
Above the search a note says when the first walk ends, "at the earliest"
where a stay or the walking time is not known yet, and when the next walk
starts. Without a start or a total no time is made up: the time field
stays empty and Search waits until one is chosen. A walk that only ends
after midnight says so, and the time field stays empty as well. On any other day, or for
any other leg, the search opens as before, with 09:00 as its default. A
connection that arrives after the next walk starts says so in its card,
before its legs are opened and before it is taken. Nothing is saved until
"Add to day", which keeps the connection as its own journey in the plan as
before; both walks stay two walks on foot and nothing is moved.
A journey saved before a walk that now arrives after the walk starts says
so on its row in the plan, on the desktop and the phone, while the plan is
looked at. Nothing is rewritten. The desktop no longer draws a connector of
nothing between a stop and a booking at the same spot, as the phone already
did, so a journey saved at the walks' ends adds no walk on either side. A
leg leaving a loop tour no longer departs at the tour's start time.
The leg is told by the walk it leaves, so two walks of a day that end at
one spot, such as two loops from the hotel, each search from their own end
and time, and a stop between two walks keeps the leg an ordinary one. Only
the leg asked for last opens the search, and none opens once the plan is
left while the walks' stops are still being read.
Both views run on one shared hook, the walk's stops are read through one
helper the stop list uses as well, and the walk's start on a day is worked
out in one place for the times shown in the detail and here.
When the name of maps.app.goo.gl or goo.gl could not be looked up for a
moment, the walk import said the short link leads somewhere other than
Google Maps. It now says the link could not be followed just now and answers
502, as for any other failure on the way; a name that leads into this
network is still refused.
A short link Google answers with 404 or 410 is one it does not know, and
asking again changes nothing. The dialog now says so in the reader's
language and asks to share the route from Google Maps again, with a 400 and
the reason short_link_unknown, instead of suggesting to try again later. A
busy or blocking answer from Google stays a failure that may pass.
The MCP tool preview_google_maps_walk is marked open world, since it follows
a short link to Google on every call, and the English text REST and MCP send
for each reason is held to the English text the planner shows.
"Add tour" in the planner now offers "Import walk from Google Maps". The
dialog takes the link of a route shared in Google Maps, either a
maps.app.goo.gl short link or the long google.com/maps/dir link, or the
share text of the Google Maps app with the one link in it. It shows the
stops in their order with their names, marks a stop the link gives no
position as such, says that the route comes from Google Maps with a link to
open it there, and that TREK plans the way between the stops itself and
does not take the line drawn in Google Maps over. Nothing is written until
"Load as walk": that opens a new, unsaved city walk in the planner with the
positioned stops and their names, routed on foot by TREK, and warns first
when it replaces unsaved work. A stop without a position is left out and
never looked up or guessed; with fewer than two positions nothing can be
loaded. While the walk is not saved, a calm notice in the planner says
where it came from, also after a reload of the draft. Cancelling or a
failure leaves every tour as it was.
Only a route the link marks unambiguously as on foot is read. A car, bike
or transit route, a link that does not say, or one that says two things is
refused with a reason the dialog gives in the reader's language. Each stop
takes its position from its own block of the link's data, so a line
dragged through extra points or a stop given as coordinates no longer
leaves the stops without positions or shifts them. The road trip and
places imports read links as before.
A short link is followed by a resolver of its own: every hop is checked
against the Google Maps short link shapes and the strict SSRF guard before
it is looked up or asked, so ALLOW_INTERNAL_NETWORK and
ALLOW_LINK_LOCAL_IPS do not open it. Each request goes to the vetted
addresses only, follows nothing by itself, reads no body and carries no
credentials; the chain has one deadline including name lookups, at most
three hops and a cap on the Location header, and the long link it ends on
must be Google Maps and is never fetched. The preview is POST
/api/trips/:tripId/tours/import/google-maps/preview for members who may
edit places, with a 502 when Google could not be reached, and the MCP tool
preview_google_maps_walk reads the same.
A city walk now shows, at each stop, when the walk gets there, until when
the stay lasts, and what the stop's opening hours say about that visit. The
same lines appear under each stop row in the planner and under each stop in
the walk's detail, in the user's 12 or 24 hour format. A conflict names the
stop, the arrival, the end of the stay and the hours it was checked against,
for instance "Lenbachhaus closes at 18:00, during the stay from 17:20 to
18:20 (open 10:00 to 18:00)", in the warning colour. Nothing is changed by
these hints: no stop, order or route moves.
The times belong to one day the walk is on. Opened from a day of the plan,
the detail keeps that day, and checking stops off stays bound to it.
Opened otherwise, and in the planner, a small pill above the stops names
the day and its start, and the walk's other days can be picked from it; it
starts on the first day with a start time. The pick is only what is looked
at and is never saved, and another day never takes over the times quietly.
Without a day, a date or a start time the line says what is missing and no
arrival is shown. TREK keeps no time zone on a trip, so start, arrivals and
opening hours are all read as the local time of the plan, and an arrival
after midnight is said to be on the next day without being checked.
Opening hours come from the trip place a stop stands for, as the travellers
entered them, and otherwise from OpenStreetMap; a pill at each stop names
the source, and a notice says the hours are a hint to check. A stop without
hours stays unknown and is never shown as open, hours that are not in a
plain form are shown as written, and an arrival that is only a lower bound,
because a stay before it is not entered yet, is not judged unless no later
arrival could escape the conflict. A trip place that a stop stands for also
gives the stop its name before "Stop N".
The arrival at a stop is found where the route passes it in the walk's
order, so the end of a loop and a stop passed on the way out and back get
the right time. The rules live once in the shared package, for the server
to give the same answers. The walk's detail reads its stops again after a
save, its own or a teammate's.
The registry of realtime events gained tours:visits when a city walk's
stops could be checked off for every member of the trip, but the test that
pins the inventory still counted 76 trip events and 109 in all. It now
counts 77 and 110 and says which event the 77th is.
The day row on the phone now shows how many stops of a city walk were
visited on that day, "2 of 5 visited", like the desktop row does. Both rows
read it from one place, and a tap on the phone names it in full without
opening the row.
A walk's stops can be checked off, skipped and taken back without a
connection. The mark shows at once, waits in the offline queue and goes out
when the connection is back, in the order the marks were made and behind any
older mark of the same day that still waits. The day plan, the walk's detail
and a reload read the visits kept on this device with the waiting marks on
top, so a mark made offline stays on screen until the server has it. A mark
the server answers with "not found", because the stop, the day or the walk
was removed meanwhile, counts as done and holds back no later mark of that
day. Any other refusal, the Tours addon turned off among them, keeps the mark
as a failed change to try again from the offline settings. The visits are
read again when the connection comes and goes, and once more after the
waiting marks went out, so a mark the server dropped or refused leaves the
day plan. A trip's visits that answer after another trip was opened no longer
show there.
The offline sync keeps each trip's walk visits and reads the stops of a walk
this device has never opened, so it can be checked off offline too. A walk
whose stops this device could not read lists no stand-in stops and no count,
and says to open it again while online. A walk put on a day while offline
says its stops can be checked off once it has synced, instead of offering
buttons that cannot work yet. A mark that fails says to open the walk again
and try once more, in every language.
Marks carry no version, so the last one to reach the server wins, as with
the other changes sent after being offline. The offline guide says so.
A city walk created or changed while offline now carries its stops, the
minutes its stays are entered with and how many have none yet, worked out
from its points the way the server will answer them. The day row, the tour
detail and the summary show the walking time with the stays as soon as the
walk is saved, with "at least" where a stay is missing, and a stay changed
while the write waits shows its new total rather than the one of the last
answer. The server and the client count the stops in one shared place.
The planner plans a walk whose walking time is not known yet with at least
the stays entered, as its overview says, so the planned field and the check
against the longest plan read the same total.
In the tour detail a longer time such as an "at least" total wraps on a
phone instead of being cut, and the boxes of a row keep one height. A total
entered by hand falls back to its short name where its column is too narrow.
A stay, a name, an importance or a protection set in a stop's dialog no
longer plans a city walk's route again: the walk stays ready to save, its
time overview follows at once, and one undo takes the change back without
routing either. A stop moved or added plans the route again as before. A
walk saves no breaks, so a cafe never counts as a stay and as a break at
once, and a break left from another type neither counts nor holds its save
up.
The planner and the tour detail show a walk's walking time, its stays and
their total apart and in the same words: 45 minutes of walking, a museum of
90 minutes and a cafe of 30 minutes make 2 h 45 min. A stay not entered yet
makes the stays and the total at least what is known, stays nobody entered
read not known yet, and stays entered as 0 read 0 min. A total entered by
hand keeps its own label, and the computed total shows beside it. The head
of the tour detail, the day row on the desktop and the phone, the tour
summary and the library of other trips show that same total, with a ≥ where
a stay is missing. Their time on the move is called walking, and the summary
says a walk is planned with its stays rather than breaks.
The tour list and the library carry the minutes a walk's stops are entered
with and how many have no stay yet, counted from the walk's points, so the
way back of a loop is no stop and its start's stay counts once. A loop run
the other way keeps its start as the stop there, with its key, name and
stay.
The planner's waypoint list keeps the rows of a leg in a file of their own,
and the tour detail its name heading in a part of its own, so both stay
within their size limits.
A walk saved from the planner kept its stops without the keys the server
gave them, so the next save from the same open planner handed every stop a
new key and dropped the visits checked off in the day plan meanwhile. The
planner now takes over the keys a save answers, point by point, without
planning the route again, so a stop keeps its key and its visits from one
save to the next.
The edits of a stop's dialog now reach the planner: a changed name, stay,
importance or protection counted as no change and was dropped. It is a step
of its own that can be undone, Save stays available, and the route is not
planned again for it.
A save that takes stops out of a walk, or makes it another type, tells every
client of the trip which visits are left on each day the walk is on, the
client that saved included, so the progress in the day row no longer counts
a stop the walk has lost.
The way back of a loop is the start again and no stop of its own. Closing a
loop gives it only the start's spot and the place it stands for, and the
planner's stays, the stops of the tour detail, the stop count of the tour
list, the visits and the progress an assistant reads leave it out, so a loop
through three stops counts three, the start's stay counts once and the way
back cannot be checked off on its own. A loop saved before keeps working.
The rule lives in one helper the server and the client share, and the tour
list takes its stop count from the walk's points through it.
The tests that seed a walk for the assistant's progress go through the ORM
factories.
Marking a stop of a city walk visited or skipped answered with a server
error every time: the write that keeps a changed status stamped its time as
a function call, which neither SQLite nor Postgres takes. It now uses the
clock the database itself spells, so a stop checked off, skipped or taken
back stays that way and the day plan of everyone on the trip follows.
The Save button of a stop's dialog in the planner did nothing, because it
sat outside the dialog's form. It saves the name, stay, importance and
protection again. A walk saved with two points that carry one key, as a
loop back to the start does, keeps that key on the first point and gives
the other one of its own, so checking one off never marks both. A walk put
on one day twice is read for an assistant from its first assignment.
The server tests cover the visits from the repository to the routes: per
day, through a moved and a removed assignment, a copy of the walk and a
copied trip without visits, a removed stop taking its visits along, and
the refusals for another trip, a stop the walk does not have, a member who
may not edit days and an unknown key or body. The MCP progress of a walk,
the station fields and counts of the tour list, and the contracts in
shared are tested too; the existing tests expect the keys every saved
point now carries, the station count of a list row and the new entity.
The client tests cover the stop dialog and its pills, the walk themes and
categories of the search along a tour, the stop menu of the waypoint list,
the walk's timing, routing and type choice, and answer the trip planner's
read of the visits in the tests instead of leaving it unanswered.
The search along a tour found nothing. It asked the places index for all
kinds of a stretch at once, above the 100 rows and 200 characters of terms
the index takes, so the index refused and every stretch went to the public
Overpass mirrors, which do not answer from this server. Now the index is
asked in small circles strung along the line, one request per kind and
circle within its limits, and an empty circle counts as an answer, so a
city walk lists its sights, museums, parks, cafes, restaurants and markets
in well under a second. The kinds the index does not know (viewpoints,
huts, drinking water, toilets and the like) are asked of Overpass along the
whole line at the same time, one query per stretch of up to 50 km, three at
a time, each with a short deadline of its own; a line past 400 km is
searched along its start and says so. When the index answers no circle at
all, its kinds go to Overpass beside the others instead of after them. A
kind no source could be searched for is named in a calm notice above the
list instead of reporting nothing found, and the reason is written to the
log. Unnamed taps, toilets, shelters, picnic spots, viewpoints, summits,
slipways and repair stands stay in the list and on the map under the name
of their kind; an unnamed garden, cafe or memorial is left out. The places
nearest the line are kept when there are more than sixty, listed from the
start, with the opening hours the source has.
A walk's parks are parks and gardens only, and its museums are museums
and galleries only, no longer the beaches, summits, theatres and cinemas of
the map's explore buttons; a water park the index files under parks is not
one of them. The index also answers markets and summits. The explore
buttons keep their single request, and a search of several kinds that
would exceed the index limits is asked one kind at a time instead of being
refused. The MCP tool search_tour_pois and its wiki row describe the walk
kinds and the new unavailable list, and the OVERPASS_TIMEOUT_MS row says
the search along a tour keeps its own shorter deadline.
The day assignments entity carries the station visits that hang off it, as
the generator writes it. A city walk gets its own placeholder for an untitled
name, the tour service tests hand in the visits repository the service now
takes, and the files the walk touched are formatted. The theme icons of the
place search overlap by their start margin, so they stack the same way in
both reading directions.
Opened from a day with a time, each stop shows its estimated arrival: the
start, the walking time shared out along the route, and the stays before
it, at the earliest while a stay is unknown. A stop whose opening hours say
it is closed then, or closes before the stay ends, says so with the times;
hours that cannot be read are shown as they are, and a stop without hours is
unknown, never open. The themes are a two by two grid and the categories one
line with a list to tick, so the search no longer fills the rail. The button
that discards a draft for a new tour says so in two words.
The search along the route offers a walk's own categories (sights, museums,
parks, views, coffee shops, places to eat, markets) and four themes that set
them at once. A found place says which theme brought it, its source and how
far it lies from the line, straight across; taken in as a stop, it keeps its
name and opening hours. Nothing is taken in without the existing confirm.
The walk's detail opened from a day lists its stops in order, each with its
stay, importance and protection, and marks one visited or skipped for that
day, or takes it back. The day row shows how many were visited. Marks reach
the other travellers at once and change no route, place or order; a copy or
another day starts with none.
City walk is a type of the planner: routed on foot without a hiking limit, on
the standard map. Each stop is edited in its own dialog, its name, its stay
(empty is not known, 0 a point passed through), its importance and whether a
proposed change must leave it; none of it plans the route again. The walk's
time is walking plus the stays, at least that much while a stay is unknown,
with no breaks on top.
A tour can be a city walk. Its points are stations that keep a key across
saves, a name, a stay (0 for a point passed through, empty when unknown), an
importance and a protection; the visits of a walk's stations are kept per day
assignment, so another day or a copy starts with nothing visited. A station
that is gone takes its visits with it. An assistant reads how far a walk got
on a day, what is open and which times are known.
isomorphic-dompurify builds a jsdom window as soon as it loads on Node,
and the root barrel is what the server and each of its ~900 test files
import, so every one of them loaded jsdom without ever sanitising. The
sanitisers move behind @trek/shared/sanitize (a build entry of its own,
like roadtrip), escapeHtml stays in the root from its own module, and
the client's translation context imports the sanitiser from the subpath.
The production server stops loading jsdom at boot as well.
A tour can be a bike tour with a routing profile (touring, road, gravel,
mtb), stored per tour by a new migration. The server grades the ways of a
mountain bike route from OpenStreetMap (mtb:scale) through one shared
Overpass client, offers CyclOSM behind its own admin switch, and exports a
bike tour's GPX with the activity of its profile. A hike's route choices
are now exactly the three the card names: steep climbs, steps and ferries.
The editor gains a card under the waypoints: along the tour. It offers what
the tour type stops for as chips (a hike viewpoints, huts and shelters,
drinking water, food, summits, toilets, picnic spots, campsites, sights; a
paddle tour put-ins, boat rental and the like, the first three ticked) and
how far from the route to look, 250 m to 2 km. Only its button searches.
Each place found shows how far it lies from the route, straight across, and
where along the route; its pin is on the map in its category's colour, and
a click there opens it in the card. Opened, a place says its kind and
source, its address, opening hours as the source has them with a note to
check them, and its website. The answer says when it is out of date (the
route or the choices changed since), offline, failed, partly searched, cut
short at the first part of a long tour, or more than shown. Nothing about
the tour changes by searching.
An opened place can go in as a stop: after the point chosen, the one before
it along the route suggested, by the button alone, as one step undo takes
back. It becomes a stop of the tour on the place's spot, not a place of the
trip. A leg drawn by hand or a fixed line (a via ferrata, a portage) is not
cut: the point after which it would go says why and offers no button. Once
the new route is in, the card says what the stop added, as the difference
of the route planned before and after; while it is planned it says so, and
where either route could not be planned it says that rather than guess.
The search merges a place OpenStreetMap maps twice, as a point and as its
outline, by its name and spot. The library repository takes its offline
error from a shared online-only module, which the search uses too.
POST /api/trips/:tripId/tours/poi-search looks for what a hike or a paddle
tour stops for along a line: viewpoints, peaks, shelters, drinking water,
food, toilets, picnic spots, campsites and sights, and on the water
slipways and boat rental. The line comes in the body, so a draft not yet
saved can be searched, thinned to at most 1000 points; the corridor is
50 m to 2 km wide.
The line is cut into stretches as the road trip's corridor search does,
each searched through the map search (the TREK places index first,
OpenStreetMap after), three at a time; a long line is searched along its
first twelve stretches and the answer says so (capped). The places kept
lie within the corridor of the line itself, each once, nearest the start
first, up to 60, each with its source, kind, address, website, phone and
opening hours as the source has them, its distance straight across to the
line (distance_m, never called a detour) and how far along it lies. A
stretch that fails leaves the others' places and marks the answer partial;
a cut answer is truncated. Nothing is written. It is a read, so anyone who
sees the trip may ask.
The map search's OSM filters gain those outdoor categories; the explore
pill does not offer them. MCP: search_tour_pois, along a saved tour's line.
The Tours tab's list of the trip's tours gains a button beside the GPX
import: take a tour over from another trip. Its dialog lists the tours of
the user's other trips, searched by name and filtered by trip and type,
each with its trip and the measures it has (time, distance, ascent; one it
lacks is left out, a paddle tour's climb too). Choosing one shows it on a
map with where it comes from, its type, distance, time, heights and number
of waypoints, and the name it gets in this trip, its own name to start
with. The note under the name says the copy is a tour of this trip of its
own, on no day yet, and that later changes stay apart.
Only the button in the foot takes it over. The new tour then comes into
the trip's lists and map and opens in the editor, unless the editor holds
unsaved work, which it never replaces. Nothing is written before the
confirm, and closing writes nothing. The library is online only: offline,
or when the list fails, the dialog says so and offers to try again; a list
cut at 100 tours says to search or filter.
A tour taken over names its source in its provenance: "Taken over from"
with the trip and the tour as they were called then.
GET /api/tours/library lists the tours of every trip the user owns or is a
member of, with the trip each is in and how many tours each trip holds, to
choose one to take over into the trip being planned. It is narrowed by a
part of the name (matched ignoring case, a "%" or "_" just a character), a
type or one trip, and the asking trip can be left out; up to 100 tours, and
the answer says when there were more. GET /api/tours/library/:placeId
previews one: its facts and its line thinned to 400 points, its ends kept.
Neither is trip-scoped, so every answer is bounded by the user's own trips,
read anew each call: a tour of a trip out of reach is "not found", nothing
hints that it exists. Measures stay null where the tour has none.
POST /api/trips/:tripId/tours/take-over copies one into this trip, which the
guard checks with 'place_edit'; the source trip is checked against the
user's trips as they are at that moment, and the source is read again inside
the write. The copy is a tour of its own: its line, measures, settings and
control points, without days, without its stops' links to places of the
other trip and without the obstacle decisions taken there; it keeps the
import record of its line. A copy that fails leaves nothing behind.
Where it came from is kept as text (tours.taken_over_from_trip_title and
taken_over_from_tour_name, migration 045100), not as a pointer, and read
back in the provenance as takenOverFrom; a copy of such a copy names it too.
The in-trip copy (P2C-07) and the take-over share one copy routine.
MCP: list_tour_library and take_over_tour, over the same service and
checks. The repository tests follow the hiking preferences column of MF-08.
The planner's cards fold to their head: waypoints, the paddle time estimate,
the wind and the checklist on the left, the open tour's summary on the right.
The title or the chevron folds a card, and the choice is kept in this
browser, so a reload finds the rails as they were left. A folded card still
says what matters in its head: the checklist what is open, the wind its day,
and the time estimate now its total as a badge, in the warning tone while
parts of it are unknown. The "planning values" badge and info dot of the
estimate go; what the starting values are is said once under its figures.
The obstacle entry dialog sits outside the checklist's body, so an obstacle
picked on the map still opens with the card folded.
The trip totals start folded to their counts and show each type's sums as
the row's white badges, each named in its tooltip, an incomplete one marked
as at least that much with how many tours it is known for. The info text is
shorter.
The Tours locale contract counts the 574 general keys the planned cards
brought in.
The Tours tab's list of the trip's tours gains the filter the plan's tour
list has, and above the list a card with what the tours shown add up to:
how many, how many are on a day and how many not, then per type distance,
ascent and descent, and the three kinds of time apart, the router's for
tours planned in TREK, the one an import brought, and the planned one with
breaks. Nothing is added up across types. The filter narrows the list and
the totals alike.
Each tour counts once however many days it is on; the list is one row a
tour. A value no tour has is left out rather than shown as zero, and a sum
some tours lack is shown as at least that much, its info dot saying for how
many of how many it is known. Paddling sums no heights: on the water a climb
says nothing, and a planned paddle tour's heights would be the banks'.
The card folds to its counts, remembered in this browser. The empty state
for a filter that leaves nothing is shared by both lists now.
While a hike is planned, the planner's map switch offers "Hiking" beside the
map, topo and satellite: OpenHikingMap, with marked trails over the terrain.
It is a choice of the planner's view alone, like topo: the global map
setting, the tour and its days stay as they are. With no tour open, over an
import viewed as it came in and for a paddle tour it is not offered, and a
choice made earlier falls back to the standard map there.
openmaps.fr's tile usage policy is followed: tiles load only as the map
shows them, with the browser's Referer, from the server's own caching; no
service worker rule keeps them and the 3D flyover's warm-up passes their
source by. Its credit and donation link are on the map; the 3D map, whose
attribution is folded away under the panel, shows them as a line of its own
above its controls.
The service is best effort. A run of failed tiles while it is shown marks
the switch, with a tooltip and a status for screen readers that say it is
not answering and that the tour is untouched; one tile arriving clears it.
The tile health the seamark overlay had is now useTileHealth, shared by both.
The source is free for non-commercial installs up to 500,000 tiles a month.
tours_hiking_map_enabled is an admin switch under Tours (admin tours-hiking-map,
audited), on by default, for an install that is commercial or larger to
switch off until it has an agreement with the operator. /api/addons carries
it as toursHikingMap, true only while Tours is on.
Leaflet, GL and the 3D map read one table of the planner's raster bases
(tourRasterBases), so topo and the hiking map are drawn the same way.
tile.openmaps.fr is on the CSP's connect-src for the GL maps.
A hike can ask the router for more than its difficulty limit: avoid steps,
avoid ferries, prefer footpaths, shorter over faster. They sit under the
limit in the planner's details as switches, each with what it really does,
and the info dot says they weigh the way and give way where there is no
other, and that none grades a path. Switching one plans the route again as
one step of the history, and the choice is kept in the draft.
Only preferences the public Valhalla was seen to honour are offered, with
the measured cases beside hikingCostingOptions: step_penalty took Würzburg
to the Festung from four flights to one, use_ferry 0 sent Kiel round the
Förde and Hamburg through the Elbe tunnel, walkway_factor moved Garmisch to
the Partnachklamm onto the paths, shortest cut the way to the Eckbauer.
use_hills and use_tracks showed no effect on foot and are left out, as are
marked, paved and rough ways, for which the router has no option.
tours.hiking_preferences (migration 045000) holds them as JSON, NULL for
none, so no tour saved before routes differently. Only a hike keeps them;
a paddle tour naming one is refused. A copy carries them, and list_tours
and get_tour_plan read them.
The trip copy's waypoint links now follow the copied places inside
TourWaypointsRepository.insertForPlace.
A tour's waypoint can stand for a place of its trip, chosen on purpose from
"Trip places" in the planner: searchable, nearest to the tour first, grouped
into near the tour and the rest, and a place already in the tour says so. A
pick adds the stop on the place's spot as one step of the history; the row
names it after the place and says it is a place of the trip. The point keeps
its own coordinates, the place stays a place of its own and its days are
left alone. Moving the point or "Unlink from the place" drops the link;
removing it never touches the place.
tour_waypoints.linked_place_id (migration 044900) references places with
ON DELETE SET NULL, so a deleted place only unlinks. A save checks the links
inside its transaction: a tour of the trip is refused, a place that is gone
or of another trip leaves the point unlinked, the same either way. The trip
copy points the links at the copied places, the GPX export writes the linked
stops as named waypoints, and get_tour_plan names them.
nearnessToLine in @trek/shared measures a point against a route, for the
picker and for the search along a route that comes next.
A saved tour now has a technical revision, raised inside the transaction of
every write that changes it: the route and its controls, the plan laid onto a
recorded paddle track, going back to that track. A write that names the
revision it was based on (expected_revision) is refused with a 409
{ code: 'tour_revision_conflict', revision } before anything of it is
written, so a stale draft never overwrites a newer tour unseen. A write that
names none writes as before, so older clients and queued offline writes keep
working; the queue never carries a base. A copy starts at 1, a source's
version stays provenance. Migration 044800 adds the column; list_tours and
get_tour_plan read it.
The editor follows the trip's tours live: a newer revision of the open tour
loads at once while the editor has no changes of its own, and shows a notice
while it has. A refused save keeps the draft and asks: save it as a new tour,
load the newer version, or overwrite on purpose.
useTourPlanner was at the size limit; its derived facts, undo history and
draft storage move into tourPlannerFacts, usePlannerHistory and
useTourDraftStorage, unchanged in behaviour.
A saved tour can be handed over as a GPX file on purpose: its whole saved
line as one track with the heights it has and none it lacks, its name,
description and link, and the activity in <type>. The file is named after
the tour. A tour without a line of two points is refused with 422 rather
than written as a file that imports as nothing; the export changes nothing.
GET /api/trips/:tripId/tours/:placeId/export.gpx, readable by anyone who
sees the trip, and the MCP tool export_tour_gpx with the same rules. The
tour detail gets a "GPX" action beside the navigation, the planner head a
download button that waits while the tour has unsaved changes.
The tours rail head now uses the same plain icon buttons as the editor.
Paddle tours are planned on the water by TREK's own router: a water network
per paddle region, built from the same Geofabrik extract as the obstacles and
searched in a worker thread of the server (no sidecar). Rivers, canals and
lakes (direct or along the shore), portages round weirs, locks by policy,
whitewater by boat, gaps marked. Found portages and locks become points of
their own; an unplannable leg says why and offers a way out.
- Shaping points: a click on the line sets a point that steers the route
without being a stop (hikes and paddle tours); recompute a single leg.
- Lake style direct/shore, suggested from the wind forecast.
- Regions load by themselves where a paddler plans (admin setting: automatic,
on request, off; size cap and a daily count), with requests for the admins,
a notification, and the load followed on the leg.
- Portage from the last point, portages follow footways via the walking
router (or stay straight), "put in here" on slipways and put-ins.
- MCP plan_paddle_route with the REST route's rules.
Under the contributors, the journey settings on desktop and phone get a section of their own, Through trips, with everyone a trip's journal link lets in, their role and the trip they come through. It is read only there, since the trip's settings manage it, and it leaves out whoever is a contributor already. getJourneyFull answers it as trip_access.
The Share button becomes the trip's Settings, a round button beside the back
pill. The dialog is rebuilt around three areas (People, Sharing, Journal) with
a side navigation, a fixed height and 960 px width on wide screens.
Journal links one of your journals from the Journey addon to the trip. Every
trip member is ticked as a reader by default, each can be raised to editor or
left out, and the people a save would let in for the first time are named
before it saves. The link can be changed or removed. With a link the trip gets
a Journal tab on desktop and phone that shows the Journey addon's own view,
live through its sync and trip:journal:changed. Nothing shows with the addon
off.
members.shareTrip and nav.share are gone with the button that used them.
A trip can now show one journal from the Journey addon as its own: any
journal its owner picks, and one journal on as many trips as they like.
The trip members chosen for the link get into the journal as viewers or
editors, see it in their own journal list and follow it live, for as long
as the link holds them and they stay on the trip.
That access is never copied into journey_contributors. It is read where
journal access is read: the contributor repository answers with the
stronger of a direct role and a link role, the journal list and the live
update recipients take the link members in, and the photo access check
goes the same way. Every one of those reads starts from linkReach, which
only counts members still on the linking trip, so unlinking, deselecting
someone and their leaving the trip all end exactly what the link gave.
A member who leaves is also taken off the link, so coming back later does
not quietly reopen the journal.
Linking or changing the members takes the journal's owner and the new
journal_link trip permission (trip owner by default); unlinking takes
either. /api/trips/:tripId/journal answers the link as each member may see
it, /candidates says who a journal would be opened to for the first time,
and four MCP tools do the same over the same service. A trip:journal:changed
event tells the trip to look again.
Categories showed in the order they were created, which a list kept per day
cannot undo once the days swap. A grip in each category's head band moves
the whole category onto another's place on desktop. A category has no
position of its own, it shows where its first item is, so the move reorders
the items as one block through the item reorder the list already has: no
new column, and the order reaches everyone the way a dragged item does. The
other view's categories keep their order.
The checklist and the obstacle data sorted texts without a compare
function. They now sort by code units through one shared compareCodeUnits,
the order a bare sort gave, the same on every machine; the material data of
a lock's parts no longer orders by the server's locale, so its hash cannot
change with it. The note editor takes the focus through a ref instead of
autoFocus, a direct function reference in a map becomes a call, and the
GPX import's default fields are a named constant.
A lock flight chained into one group of more than 30 parts broke the
checklist's contract and made every decision about it fail; an entry now
names its nearest part and the first others, a portage lists at most 30
obstacles and a checklist at most 100 own entries. Reading along a line
takes in the parts of a lock the corridor cut off, so its data basis no
longer depends on how the route runs. A line or an area stands at the
middle of its extent, so adding a node leaves it in place, and an earlier
decision is judged by where the obstacle was, not by the route point of its
passage. The cache keeps its readings without their lines, for one data
version at a time, and the data version is read without the region
boundaries.
The checklist, its statuses, choices and notices, and the safety note of a
paddle tour, translated into all 27 languages. A spec keeps the checklist
strings in English and German from claiming the water is safe, cleared or
passable. The paddle strings of the last batch that Prettier had not seen
are formatted.
PAD-06 and PAD-09 in shared. A paddle tour's checklist lists the obstacles
of the OpenStreetMap data along its route, each bound to a basis: the route
near the obstacle as samples around every passage, and the material data of
the obstacle as a hash and its position. A decision keeps that basis, so it
reads as one to check again once the route or the data changed there, and a
portage decision holds while the paddler's own portage carries round every
passage. The check bench sums the list up for the tours list and the day
plan. Nothing in it is a safety or legal clearance.
The route relation learns the passages of a route by an object and the
distance of a point to a route. The client takes the obstacle key from
shared instead of its own copy.
The strings of the paddle plan, the time estimate, the wind card, the obstacle card and notice and the admin's paddle water data, translated into the 25 locales that still lacked them, with the plural forms each language needs. The pinned count of Tours keys follows.
Maurice