The tours list in the places browser now uses the same rows as places: a
grade or type tile, the day plan's figure badges and a day badge or plus on
the right. A shared "Planned on desktop" badge replaces the grey hint box
there and sits under the road trip's empty stage.
Trip settings and trip edit open phone sheets instead of the desktop
dialogs; the edit sheet gains the day count of a dateless trip and the
reminder. Questions are asked in phone sheets, not the browser.
Admin on the phone: the paddle regions and school holiday cards are phone
cards on their shared hooks, long addon descriptions fold to two lines,
the addon header keeps the wordmark inside its sentence, the group bands
drop the dash and the permissions actions get a row of their own. The
Tours addon gets its catalog name and description in every locale.
The journey map on the phone shows every layer without the switch bar.
Every journey map (the desktop aside, the phone screens and the shared page)
now carries four switches: Plan, Recorded, Entries and Photos, each with its
count, a spinner while it loads, the warning tone when it could not be read
and the reason when it has nothing to show. A switch only hides, in place:
the map is not rebuilt and keeps its view, and the choice is kept in this
browser per journey (per link on a shared page, by a hash of its token).
The plan draws the places the linked trips put on their days as hollow dashed
pins and the trips' GPX routes dashed; a place an entry was written about is
not drawn twice, the entry's pin carries a check instead. The stays a day
report was taken over from show as dots in the colour of their day. Marks on
one spot join into a disc with their number and open as a list; a picked
place or stay opens a card with its trip, days and times and leads to its
entry. A key beside the switches explains every pin and line and says that
a plan is no proof of a visit. The phone timelines now show the photos too.
The GPX routes come with the map's layers through the linked trips, read
only while the journey's track switch is on; the frozen /tracks answer stays
Studio's. The share settings on desktop and phone get Trip plan and Recorded
routes under Map, off by default and only switchable while the map is shared.
Journey Settings get "Prepare recorded days automatically" under GPX Tracks,
off by default and set by the owner. With it on, the Dawarich background
check also reads the linked trips of the journey for the owner and every
editor with a connection of their own, within the same 400 day reach and
windows as the trip sync, and only for new and changed stays: a trip the
person travels on is not asked twice, and the stays of a trip they are not
on are filed under no trip. Nothing is written into the journey; the stays
wait at their day, and a stay taken over or left out is never offered again.
Under the switch the caller sees when their stays were last fetched, or why
not (no connection, no dated trip, background check off, the reason of the
last failure beside the state still shown), with a "Fetch now" that the
switch also runs when it is turned on. A day of the trips that is not final
yet carries a dot on its take-over button, on the phone in the stay sheet,
and the tooltip says whether it is still running, was fetched before it
ended, was not fetched yet or shows an older state after a failed refresh.
The day review says so for today too.
Server: migration 046180 adds journeys.auto_prepare_recordings and
journey_recording_prep (the last attempt, last success and last error per
journey and person). JourneyRecordingPrepService in the journey domain lists
the prepared trips and keeps the status; DawarichSyncService walks those
trips in the same loop as the person's own and records each journey's
outcome. GET /api/journeys/:id/recordings/prep answers the caller's status
under a @trek/shared contract, the MCP tool get_journey_recording_prep reads
the same, and update_journey takes auto_prepare_recordings like the PUT
contract. The column stays out of the plugin output. All 27 locales carry
the strings; the Journey, Dawarich and MCP tool wiki pages describe it.
A journey on a phone with stays on days that hold no entry offers each waiting day in the Dawarich stay sheet, so a day can be built from its stays alone; desktop and phone read the same days through openStayDatesWithin. A position picked for a group falls back to the longest stay with a place once that stay is unchosen or split off, a merged entry of stays without a position goes out unpinned instead of being refused, and a stay taken over meanwhile is never joined across. review_journey_day_stays is no longer marked read-only, since it refreshes the caller's stored stays. The already-taken notice no longer claims the stays were in this journal. An e2e case checks the drafts stay off the public share.
A journey day now has a list button in its header beside the route, with the
number of stays still waiting, and the row of the day's Dawarich stays gets a
"Take over day" button; on a phone the journey's More options offers it for
the day of the card shown. The dialog reads the day again from the caller's
own Dawarich and shows the route and the stays on one map, numbered in the
order they were lived and pinned in the colour of the day, beside a list with
times, durations, the stays Dawarich only guessed or is unsure about, the ones
without a position, the entries the journal has on the day and how many people
will see the drafts. When Dawarich does not answer, it says why and shows the
stays of the last sync.
Open stays start chosen, the same place twice in a row starts joined as one
entry under a title and a chosen map position, any two neighbours can be
joined or kept apart, a name can be corrected and a stay left out. "Day
report" turns every chosen stay into one entry that lists them with their
times, at a chosen stay or off the map. The day's route can go along when the
journey keeps none yet. Nothing is written before "Take over N drafts", and a
blank name or title holds it back with the reason. Stays left out are dismissed
and can be restored in the stay list.
The take-over writes drafts only, never touches what the journal holds, and is
one transaction: every stay is checked to be the caller's and of that day, the
entries, the stays they hold and the marked suggestions commit together, and
the entries are announced after the commit. A stay the journey holds already
is reported instead of written twice, so a retry after a lost answer is
harmless; a failed attempt reads the day again and keeps the choices, and a
route that fails after the drafts can be kept again alone.
Server: migration 046170 adds journey_entry_stays (one row per stay of an
entry with its own name, place and times, unique per journey, source, person
and visit, gone with its entry), owned by the journey domain through
JourneyEntryStaysService. The single stay accept records its stay there too,
over REST and MCP alike. DawarichSyncService.refreshDay reads one day's visits
and upserts them without flagging anything missing; DawarichDayStaysService
lists and settles a day's stays. JourneyDayImportService in journey-recordings
serves POST /api/journeys/:id/recordings/:date/stays/review and /import with
@trek/shared contracts, and the MCP tools review_journey_day_stays and
take_over_journey_day_stays run on the same service and checks. createEntry
can write without announcing for a caller that announces after its commit.
The desktop dialog and the phone sheet of the route (JRN-01) and of the
take-over share one frame each. All 27 locales carry the strings; the Journey
and Dawarich wiki pages and the MCP tool list describe it.
A day header in the journey timeline now carries the Dawarich mark for an
editor whose Dawarich answers (dimmed with the reason while offline). It opens
a dialog that names the journey and the day and reads that one local day from
the caller's own connection: a sketch of the route, distance, first and last
time, pieces, gaps without recording, modes and whether tracks or thinned
points answered. The day is cut in the zone Dawarich records in where its
answer shows one, else in this device's, and a picker cuts it in any other.
Nothing is kept before "Keep route". On a phone the same sheet opens from the
journey's More options for the day of the card shown.
What is kept is the preview that was seen: the save reads the day again and
refuses with recording_changed when its hash moved, and the dialog shows the
new version. The same day taken over twice keeps one version and announces
nothing; a different version is replaced only on "Replace", never touching an
entry or text. A failed read throws before any write, so the kept version
stays. Gaps stay gaps: points are split where silence ends elsewhere, and no
day is joined to the one before. The dialog says how many other people will
see the route; editors may keep their own recording.
Kept days show in the day header (distance, whose recording, since when,
still running) and on the desktop and phone journey maps in the colour of
their day's pins, winning over the live trail of their date, and stay drawn
without Dawarich. A trip's GPX track is now drawn dashed as the plan, recorded
routes solid. Shared links do not show recorded days. Remove route asks first
and works without a connection.
Server: migration 046160 adds journey_recorded_days (one row per journey,
local day and source, segments as JSON, zone, window, fetch time, hash,
importer kept past their account). The journey domain owns the rows through
JourneyRecordedDaysService; the new journey-recordings domain takes a day
over through DawarichTracksService.fetchDay, which reads past the cache, asks
a window wide enough for every zone and refuses with DomainErrors. REST under
/api/journeys/:id/recordings (list, preview, PUT and DELETE /:date) with
@trek/shared contracts, and MCP list_journey_recorded_days,
preview_journey_recorded_day, save_journey_recorded_day and
delete_journey_recorded_day on the same service and access. A new user event
journey:recording:updated keeps every open map current. JourneyTrack gains an
optional kind. All 27 locales carry the strings; the Journey and Dawarich wiki
pages and the MCP tool list say what it does.
The vias the spread keeps on their legs are taken over in a layout effect
instead of during render, the route redraw takes the planner's async
updateRouteForDay, and the menu items for whole or stages move out of the
button component into their own module. Two leftovers of the old day pills
in tourParts go. The hook test's reanchor reloads the vias like the real
one does, and the detail test finds the button by its label, Add to Day.
Spreading a multi-day tour wrote through the store directly and skipped
the via re-anchoring every other write on the plan does. A tour with a
start counts as a road-trip stop, so taking the whole tour, a stale stage
or a moved stage off the middle of a day shifted every later stop, and the
vias anchored by position shaped the wrong leg. The undo had the same gap
when it put the whole tour back mid-day. Each stop a spread or its undo
takes off a day now carries the day's vias along (reanchorAfterRemove),
and the whole tour put back carries them the other way
(reanchorAfterInsert). The stops are read from the store as each write
goes out and the vias are kept as the last correction left them, since
one run can touch a day twice before the plan renders.
The phone's place sheet greyed out a day that holds a multi-day tour, so
its stages could not be spread from there. It now checks the day the way
the desktop menus do and leaves the choice to the plan, which opens the
card with only the stages offered.
The second step of the day menu names the day picked, and a greyed-out
"Whole tour on this day" says why right under it. The toast for a tour
that sat whole on several days now says "days" instead of "day", in all
27 languages.
Putting a multi-day tour on a day through any of the usual ways put the
whole tour on that one day. Now the way it goes on is a choice: the whole
tour on this day, or stage 1 on this day and each next stage on the next
day of the trip.
The day menu of the tour lists and the detail's "Add to day" ask in the
same menu, as a second step after the day; a tour dragged onto a day, or
added from a place where no menu asked, gets a small dialog on the desktop
and a card on the phone. Only the trip's days are used: when fewer days
are left than stages, the menu says up to which stage fits and the rest
stay without a day. A stage already on a day moves to its new day, the
whole tour comes off the days it was on, and a stage the route no longer
has comes off too. The writes run in order through the store, the repo
and the mutation queue, so they work offline, and one undo takes the
spread back, the whole tour onto its day again.
The plan lives in stageSpread.ts, the writes and the question in
useTourDayChoice, which every way onto a day now passes through on both
the desktop and the phone.
The unused day pills go, a client-only type stops being exported, the place
form context moves out of the page hook so its view model stays the first
object it returns, the place form test helpers split the stub component
from the plain setup, and four router files are formatted.
The place form's time section moves into PlaceFormTimeSection, its tour test
into PlaceFormModal.tour.test.tsx over a shared tests/helpers/placeForm setup,
the page hook hands the place form its close, day plan and tour, and the day
plan's surface classes and tones move into dayPlanSurfaces. The size baseline
drops to the new counts.
A tour on a day had no place in the day's timeline: its time was not tied
to the slot it was planned in, so several hikes on one day could not be
lined up. A tour now sits there the way a place does, on the times of its
day entry, one model for every tour type. With a start and a known time
(the planned total, else the estimate of an import) its end follows as the
start plus that time; it is shown fainter, marked with an approximate sign
where it comes from an estimate, and says in its tooltip how it was worked
out. An end typed by hand wins. A day that holds one stage of a multi-day
tour gets no end from the whole route.
When the end runs past the start of the day's next timed item, the row
says so in one quiet line, as a late connection between two city walks
does; nothing is moved. The existing time fields of the day entry, on the
desktop form and the phone sheet, say what the end works out to while none
is typed. City walks keep their arrivals per station. The logic lives in
one module both day plans run on.
A tour kept in a collection was a card in a box of its own above the list,
and its button lost its look to the collections page's button reset. It is
now a row of the list like a saved place: its grade or type tile, its name,
type and the trip it came from, its measures, and Add to a trip, with
removing dimmed beside it. The list's search narrows the tours too. The
phone shows the same rows and takes a tour into a trip from a sheet, on the
same hooks as the desktop.
The collection tour fixture no longer writes the dropped winter_activity
column, the drafts are saved as version 11, and a hike no longer offers
the pistes layer, which belongs to a ski track only.
Ski becomes "Ski & winter", a type the planner plans with six disciplines
(alpine, snowboard, cross-country, ski touring, snowshoeing, winter hiking),
nothing preselected; saving needs a discipline, and a technique for
cross-country. Every leg is drawn straight between the points through
planner/skiRouting.ts, the one place the piste router will plug in, with its
heights from the elevation source and no ski time worked out.
The hike's winter label goes entirely: its migration, column, field, marks,
GPX rule, MCP field and strings. A hike is summer only; a ski tour with the
snowshoe discipline exports as snowshoeing. The unreleased ski migration takes
the six disciplines and the collection migration loses the winter column.
The pistes are offered for a ski tour, shown until switched off, and with no
tour open, never for a hike. Export, copy, collections, stages (untimed),
actual tracks, the atlas, list and day marks (one glyph per discipline), 3D,
planning over a ski import and list_tours/get_tour_plan know the planned ski
tour.
The server's src and tests together are past 570,000 lines and the test
typecheck needs about 4.3 GB, over Node's default heap; it now gets 8 GB like
the test jobs. Forty new client files are formatted, and the react-hooks/refs
baseline drops by the one warning a split hook removed.
Which places are tours, their planned times and where their stages run
travel together to the desktop and the phone day plan. useTripPlannerPage
now puts them together as dayPlanTours, and the page passes that bundle
instead of naming the three props at both places.
The map focus helpers split out of useTripPlannerPage returned object
literals ahead of the hook's own return, which the B4A wiring test reads as
the view model. They move to tourMapFocus.ts beside the hook.
Clears the client lint ratchet: helpers move to sibling .ts files for react-refresh, complex render paths get small helpers, floating promises are voided, the stage rail lets a stale request go during render, and the collections page reads the active list's tours and rights in ActiveCollectionTours. StageNumber is no longer exported.
The type order puts run before kayak, the import button reads Import GPX or KML, and the mocks gain what the components now read: routeRun, packing items and links, the map's zoom, the translation provider and the compare store's map flag.
Types, test expectations and helpers the seven tracks each changed on their
own, brought in line with the integrated code. tours.service.ts and the tours
repository grew past the size limit with every track and hand their row and
write helpers to modules of their own.
Settings, Integrations, wanderer gains an optional background check of the
trails you imported, off until you switch it on. While on, TREK reads the
short record of each such trail at most once a day (never its GPX file) and
leaves a hint when the trail may have moved on: "may have changed" when only
wanderer's change time moved, "changed" when its name or description proves
it, and "not checkable" when the trail is gone, no longer yours or carries no
change time. Nothing is ever said to be unchanged. A new hint arrives as a
notification that opens the tour (a new ?place= link in the planner); the
tour's provenance shows it with the source check right beside it, and the
card lists all open hints in a dialog, each leading to its tour. The check
reads the source in full as before and spends the hint; taking a change in
stays the confirmed reimport. No tour is ever changed or deleted.
The check only asks through your own connection, only about trails your
account imported into trips you can still open, and stops when you switch it
off, remove the connection, wanderer refuses the token (until a test passes
or a new token is saved) or the admin switches wanderer off; hints and
snapshots stay. A run asks at most 25 connections for at most 10 records
each, one after another, and an instance that fails (an outage, a rate
limit) is left alone for an hour, doubling up to two days.
Server: migration 046120 adds the switch and the run bookkeeping to
wanderer_connections and the tour_source_hints table (one row per snapshot,
for its importer, gone with it). WandererWatchService and an hourly
wanderer-watch job on the CronRegistrar live in the tours domain and read
through WandererService; GET and PUT /api/integrations/wanderer/watch and GET
/api/trips/:tripId/tours/wanderer/sources/:placeId/hint (place_edit, like the
check) answer with @trek/shared contracts. A new user notification event,
wanderer_source_hint, can be muted per channel. Saving a new token now clears
what the last check said about the old one. There is no MCP tool, as for the
rest of the personal wanderer connection. All 27 locales carry the strings,
and the admin wiki page says what the check does.
"Open packing list" switched to the Lists tab but left it on whichever
sub-tab was open last, so someone who had been in the to-dos landed there.
It now picks the packing side first, and a Lists tab already on screen
follows the choice; storage that is blocked no longer throws either.
With the Packing addon off, "Remove link" let go of the link on one click,
and the link cannot be made again until Packing is back on. It now opens
the tour's packing dialog with only the dimmed link and the Remove link and
Cancel buttons, so nothing changes without a second, deliberate click.
A tour can now point at the packing list of its trip, as a whole or at one
of its categories (say "Hiking gear" for a hike), and shows it in its detail.
The new Packing list section reads the list live as the user may see it: the
backpack tile with the item count on its corner and the category's own
colour, how many are packed with a thin progress bar, the first items ticked
off or not with their quantity, how many more there are, and a button that
opens the trip's Lists tab. Who may change the tour links one, changes it or
lets go through a dialog that lists the whole list and every category with
its colour and item count, and writes only on its confirm.
It is a reference, never a copy: the items stay in Packing, are ticked off
and edited there, and each traveller sees in the tour only the items Packing
shows them, so an item kept to oneself never shows through a tour. A
category that is renamed, cleared or only holds items of others reads as
missing, an empty one as empty, a link that could not be read says so with a
retry, and while Lists are switched off the link stays, dimmed, and can
still be let go. Removing the link, or the tour, leaves the list and every
item as they are. Nothing suggests or changes an item by itself.
On the server the link is a row of its own in the tours domain
(tour_packing_links, migration 046110), one per tour and gone with it.
GET, PUT and DELETE /api/trips/:tripId/tours/:placeId/packing-link read it
with the trip and change it with place_edit; linking needs the Lists addon
and, for a category, an item of it the user can see. The writes answer the
tour with its link and tell the trip through tours:changed, so the offline
client queues them as writes of the tour and replays them like one. A copied
trip keeps its tours' links, a tour saved as new or taken over does not.
The MCP tools get_tour_packing, link_tour_packing and unlink_tour_packing run
over the same service and checks; the read also hands the tour's facts as
context for suggesting what to pack, which only becomes an item through the
packing tools. The empty category placeholder now lives in @trek/shared so
both sides leave it out alike. All 27 locales carry the new strings, and
the wiki describes the link and the tools.
A saved tour can now be kept in a collection, apart from any trip, and
later made into a tour of another trip. The bookmark button in a tour's
footer and in the planner's head (waiting for the save while there are
unsaved changes) opens a dialog with every list of the user; a list they
may only read stays in it, dimmed with a lock and a tooltip. The list
keeps an independent copy: the line, the type, every measure and setting,
the waypoints in order with their roles, the origin, and the trip and tour
it was saved from as they were called then. Its days, its links to places
of the trip and its obstacle decisions stay in the trip, and later changes
to the tour do not reach the copy.
A collection shows its kept tours as cards above its places: the grade
tile with the source badge, measures and the waypoint count as badges,
the trip it came from, and who kept it. The owner or an admin of the list
can remove one after a question; tours made from it stay. "Add to a trip"
shows the kept tour on a map with its facts and numbered waypoints, lists
the user's trips (the ones they may not add tours to dimmed), and asks
outright whether the waypoints come along. "Line only" keeps the line as
saved and adds no waypoints; a tour kept without a line can only bring
them. The new tour has an id of its own, no days and no new places, and
names the trip and tour it was saved from; the dialog then offers to open
that trip. Neither the collection nor the original tour changes.
On the server the kept tours are a table of their own in the tours domain
(collection_tours, migration 046100), each row written whole once. Every
copy, the in-trip "save as new tour", the take-over from another trip and
both directions here, now goes through one copy model (tour-copy.helpers)
instead of a second one. Reading and removing follow the collection's
roles, keeping one also needs access to the source trip, and taking one
over needs place_edit on the target trip; the kept tour is read again
inside the write, so one removed meanwhile leaves no half-made tour. The
MCP tools list_collection_tours, get_collection_tour,
save_tour_to_collection, take_over_collection_tour and
delete_collection_tour run over the same service and checks. All 27
locales carry the new strings, and the wiki describes the flow.
A multi-day tour in the planner's list of the trip's tours now unfolds into
its stages (MDT-02), so the stages can be seen together and fitted into the
trip without leaving the one route they are cut from.
- The fold beside a multi-day tour lists its stages in route order, each
from stop to stop with its distance, climb, descent and moving time, read
off the saved tour the way the planner reads them, and below them what the
whole tour adds up to. A value no stage tells is left out, a total some
stages do not tell is marked as at least that much and says for how many,
and a stage whose route is not planned yet says so.
- Each stage has its own day: a pill opens the trip's days, moves the stage
to another one or takes it off again. A stage without a day shows a dashed
"No day" pill. A day holds a tour, or one of its stages, once, and a stage
is on one day at most; the plan's own offline path writes it.
- A stage opens in the planner: the tour opens as any tour does and the
stage is shown once its points are in.
- The day plan names the stage a day holds with its own figures, and the
day's route runs to that stage's start and on from its end; the trip map
draws that stretch only. The tour list still counts a tour once, however
many days hold it or its stages.
- A saved change that takes a stage away (its stage end gone, the tour a day
tour again, back to the recorded track) takes it off its day in the same
write and tells every client; the planner says so before the save.
- REST and the assign_place_to_day tool take the stage by the key of the
stop it starts at, with the same checks; list_tours names the stops
between the stages and the stage each day holds.
A day assignment remembers its stage by that key (migration 046010); every
assignment made before holds the whole tour, as it did.
A hut-to-hut hike or a paddle trip over several days is now planned in the
Tours planner as one tour: the whole route is planned as before, and stops
along it are marked as stage ends (MDT-01). The stages are read off that one
route in its order, never kept as copies, so a change inside a stage changes
the whole tour and every figure on it.
- A Day tour / Multi-day tour switch beside the tour type; a stop's menu
ends a stage there or lets it go on. Back to a day tour removes every stage
end after a confirmation, as one step undo brings back.
- The list of points is headed per stage with its distance and moving time;
a stop that ends a stage carries a moon at its number, on the map too.
- The overview lists the stages from stop to stop with distance, climb,
descent and time (hiking rule per stage, paddle estimate per stage, the
router's time shared by distance otherwise), marks where each ends across
the elevation profile, and a stage of more than a day on the move warns.
- A stage end a change cannot keep (its stop removed, moved to an end or
made a shaping point) is dropped and said so, with undo, never moved
to another point.
- A multi-day tour may take a day a stage, so its time limit grows with its
stages; the tour keeps its one type, portages included.
- The list and the MCP tools show the stage count and where stages end.
Stage ends are a flag on the waypoint (migration 046000); a tour without one
is a day tour, as every tour saved before.
With the Tours addon on, the Atlas panel gets a third tab, Tours, beside
Stats and Bucket List: what you have done on your tours across all your
trips. A period (all time, this year, the last 12 months or an earlier year)
and a tour type narrow it; the tab shows the distance large with the number
of tours at its corner, the ascent and descent, and the types with their
distance. "Show tours" opens every tour of the period in a dialog with the
same filters, the sums, the split by type and one row per tour.
What counts is said, never guessed. A tour counts once the day it is on is
over, with the values of the planning, badged "Planned" and explained as
not measured. A linked actual track (ACT-01) replaces those values for its
execution, badged "Recorded" and named, and is never added on top nor
counted as a tour of its own. A tour on several days counts once, a whole
route does not count beside the stages planned from it, a paddle tour sums
no heights, and a value nobody knows stays out of the sum, which then reads
"at least". Only the user's own part counts: a day names them among its
participants, or names nobody on a trip of their own; being able to open
somebody else's trip makes none of its tours theirs. Tours still ahead, on
no day or only on undated days are named as not counting. A tour that fell
through can be left out of the sums ("Leave out"): it stays in the plan
and in the list, dimmed, and "Count again" brings it back. Only the user's
own numbers change.
Server: GET /api/tours/activity-stats answers the user's activity entries
across every trip they can open, and PUT /api/tours/activity-stats/exclusions
leaves a tour out or counts it again (the tour must be in such a trip, else
404). A tour_activity_exclusions table keeps the exclusions per user and
tour. The sums are added up by a shared summary in @trek/shared, so the
Atlas and the assistant say the same numbers. MCP: get_tour_activity_stats
and set_tour_activity_excluded over the same service. The tab reads live
and needs a connection, like the rest of the Atlas statistics.
The compare switch in a tour's detail showed whenever the detail sat beside
the plan map, but the map draws no comparison in road trip mode or with the
trip overview open. Pressing it there turned the switch on while nothing
appeared on the map.
The plan map now tells the compare store whether it can draw a comparison.
The detail offers the switch only then, and turning to the road trip or the
overview, or leaving the map, ends a running comparison.
Each actual track in a tour's detail now stands beside the plan instead of
on its own: a table names the plan and the actual track as columns, each with
the line it is drawn as on the map, and sets distance, ascent, descent and the
time with breaks side by side. The difference is shown, signed and with an
arrow, only where both values are known and mean the same thing; a planned
total that leaves a stay out reads "at least" and is not subtracted from. A
value one side does not carry is named as missing ("Not in the plan", "Not in
the track", "No time stamps"), never estimated. Below the table, how far the
track left the planned line: its farthest point and the recorded stretches
more than 50 m away, or that there is no line to compare.
On the desktop plan map, "Compare on map" draws the actual track dotted in
the colour of done next to the plan, which stays picked in its own track
colour (and is put back should it be hidden on the map). The recording leaves
the map as a tour of its own meanwhile, so it is never drawn twice or in a
plan's colour. A frosted legend over the map names both lines and ends the
comparison; so do closing the detail, comparing another track, or the track
being unlinked. Comparing only reads: neither the plan nor the track changes.
The track is laid into the day's route lines the map already draws, so both
renderers show it without a layer of their own. distancesToLine in the shared
route corridor measures many points against one line laid flat once; a long
recording is measured in at most 1500 samples.
A planned tour can now be given the track it was actually done with. In the
tour's detail, "Add actual track" opens a dialog that asks for the day the
tour was done on (or none) and a recording of the trip: an import nobody
planned over, or a new one through the existing GPX import, its preview
preset to the tour's type. What the choice measures is shown before anything
is written, and only "Link" writes. The linked track keeps its own name and
source; the detail shows its distance, heights, profile and, only where the
file carried time stamps, the time it took, marked as actual values next to
the untouched plan. A track can be changed or unlinked again.
Server: a tour_activities table points a tour's execution (a day assignment,
or none) at a recording of the same trip, and the tours GPX import keeps the
first and last time of a track whose every point carries one. The values are
read from the recording's own line on every read, so a changed recording
updates them while the plan's line, measures and revision stay as they were.
Every check runs inside the write: the recording must be an import of this
trip not planned over, documenting no other tour; the day must be one of this
tour; a refusal names its reason and changes nothing. PUT and DELETE
/api/trips/:tripId/tours/:placeId/activities answer the detail, which now
carries the actual tracks; the list names them per tour and per recording.
MCP: assign_tour_track and unassign_tour_track over the same service and
checks, get_tour_plan reads the values without the line.
A recording linked as a tour's actual track is no longer counted as a tour of
its own in the trip's tour summary, and the GPX preview imports a city walk
as one instead of as a hike.
A hike can now be planned as a round out of one of its stops without
building the loop point by point. "Round hike from here" in a stop's menu,
or the round button in the head of the waypoints for the start, opens a
card over the planner map: the start (any stop of the tour, picked from a
list), the wished length in the traveller's unit, the window of a fifth
either way it allows, and the tour's hiking limit, which every question
to the router keeps to together with the hike's preferences.
TREK looks for up to three different rounds itself on the hiking router it
already uses. It steers loops round circles in several directions from the
start, asks a loop that missed the length once more at a corrected size,
and learns from each answer how much longer the paths are than straight
lines. A loop that walks most of its ground twice (a way there and back), a
spot too far from any path, and a round that repeats one found are left
out, and nothing outside the window is offered. The rounds show up in
their colours on the map and in 3D as they are found, the map frames the
area they can lie in, and each lists its length, how far it lies off the
wish, climb, descent and walking time once the heights are in. Fewer
rounds than three, none, or a router that does not answer are said so.
Showing, choosing and closing change nothing. "Take this round" puts the
start, the steering spots as shaping points and the way back in place of
the plan as one step of the history, with a "Round taken" note and its
undo; a tour that held more than its start asks first. The round is then
an ordinary tour to edit and save. A start moved or a limit changed while
rounds are shown lets them go and the card says why.
The card shares its frame, buttons and rows with the comparison of a
section's ways, and the map corner still holds one card at a time.
While the other ways of a hike's section were compared, a click on a via
ferrata or a place on the map opened its card in the same corner, stacked
over the comparison. The corner now holds one card: whichever opened last
stays and the other closes, before paint, so the two never show together.
The router's first answer between the two ends is its own way under the
hike's rules, which the tour already routes the section by. Offered as a
choice, taking it only planned the leg again, usually to the same line, and
the card closed without "Way taken" or an undo step. It is no longer
offered, so every way taken is held by shaping points, changes the route and
can be taken back in one step.
A routed section of a hike between two neighbouring points can now be
compared with the other ways the router knows between the same two points,
under the same limit and preferences. "Compare ways for the next leg" in a
waypoint's menu opens a card over the planner map: the way taken now and up
to three others, each drawn on the map in its own colour, with length,
climb, descent and walking time by the signposts' rule. Figures without
heights stay unknown, and the differences to the current way are shown
only where both are known. When the router knows no other way, or does not
answer, the card says so.
Showing, hovering and choosing change nothing. Only "Take this way" does:
the router is first asked whether a few shaping points hold the chosen way
(the check the road trip's picker already uses), and only then are they set
into that one leg as a single step of the history, with a "Way taken" note
and its undo at the foot of the map. Other legs, fixed lines, days and
points stay as they were, the totals follow from the replanned route, and
the shaping points can be dragged like any other. A section that changed
while the router was asked, or a way it does not keep to, is not written,
and the card says why. The ways are drawn in 3D too.
A hike in the planner, being edited or viewed as an import, now has an
"SAC grades" card. Switched on, it asks the router which OpenStreetMap
ways lie under the line (matched on foot, every grade of path open) and
the server reads their sac_scale through the Overpass mirrors, the same
trail-grades read the mountain bike grades use. The grades are drawn
along the route on the planner map in one ramp of a single hue, T1 to
T6, and listed by share and length; a row draws its class alone. Each
row names its source in a tooltip: the SAC hiking scale and the
sac_scale value OpenStreetMap wrote.
What is not known stays unknown and says why, never T1: a way without
a grade, a grade that names no single step (handed on as written), a
stretch with no way clearly under the tour's line, or a way that could
not be asked about. For imported tracks and stretches drawn by hand a
matched way only counts where it keeps within 25 m of the tour's own
line, so the original line is kept and nothing is guessed. The router's
own reading of the scale is not asked for, since it may be normalised.
The routing limit of a planned hike sits apart as a setting with its
own badge, and a known step above it is marked. Nothing about the tour,
its places or its days changes; switched off, the map is as it was.
No regional colour categories and no grade derived from slope, height
or trail markings.
A tour can now be a ride (HOR-01). The planner offers "Horse ride" as a
tour type with its own horseshoe, and a Horse routes card beside the
waypoints looks, when asked, for the route=horse relations OpenStreetMap
knows in the map view. A route opens in a dialog that shows it on a map in
the sections it is made of, split at forks, gaps and crossings, so nothing
is ever joined across a gap. The rider picks a section and its direction,
sees what the horse=* tags along it say (open, limited, closed, or unknown
where untagged) and whether it is signposted the other way, and takes it as
one undoable step. A section that does not start where the ride ends is
only joined by a straight manual stretch once the rider switched that on.
Nothing of a ride is routed: every leg follows a section or is drawn by
hand, and the waypoint list and the map say which (a section as a solid
line with its route, a manual stretch dashed and marked unchecked). A point
at a section stays where the route has it, a ride works out no riding time,
and distance, heights, day assignment, GPX import and export, the 3D view
and the reversed ride keep working with each leg's origin saved and opened
again. A failed lookup leaves the ride and the routes already found as they
were.
The server reads the routes through the shared Overpass client
(GET /api/trips/:tripId/tours/horse-routes, Tours addon, trip access),
keeps an answer twelve hours per grid-aligned view, and the tour contract
refuses a routed leg, a via ferrata or a riding time on a ride and a horse
route section on any other type. A migration enables the horse tour type.
The pistes overlay has no tiles below zoom 9, so switching it on at a region
or country view left the map empty while the switch looked on, which read as
broken. Both maps now report their zoom with the viewport, on the 256 px tile
scale raster sources count in (a GL map's own zoom is one step lower there),
and the planner hands it to its overlays. While the pistes are on and the map
is further out than their first tiles, the switch stays pressed in the soft
accent, its tooltip and the key's first line say to zoom in, and the screen
reader hears it once. An unknown zoom claims nothing.
SKI-01. The Tours planner's layer switch gains a winter layer: OpenSnowMap's
transparent piste overlay over whichever base map is shown, so a ski area
can be looked at while preparing a winter trip. It is offered with no tour
open (a resort without any route), beside a hike for winter hiking and on an
imported ski track; it needs neither a GPX import nor the ski type, and a
bike tour, a run and a paddle tour do not offer it. It is off until switched
on, and the choice belongs to the map view: switching it changes no point,
no step and no route, and it stays on from no tour to a hike and into 3D,
where the terrain draws it too.
The switch goes by its icon alone, named by its tooltip, so a hike's row
stays short. While the layer shows, a small key button rides beside it in
the same pill, its badge the four grade colours. The key opens above the
map as a popover: the downhill grades in OpenSnowMap's own colours (novice,
easy, intermediate, advanced, expert, freeride), cross-country trails,
winter and snowshoe trails, toboggan runs and lifts, a note that this is
mapped data that says nothing about what is open or groomed, the snow or
avalanches, and a link to the full key at OpenSnowMap. If the tiles stop
coming, the switch turns to the warning tone with its badge and says that
the map and the route still work, and the key stays away.
Only the overlay is used, never OpenSnowMap's relief or base maps. Like
every overlay it loads only the tiles in view: nothing is prefetched or
cached by the Service Worker, as their terms forbid bulk downloads. The
tiles go out with the page's origin as the referer, the attribution credits
OpenSnowMap (CC BY-SA) and the OpenStreetMap contributors, and the layer
stops at zoom 18, beyond which the server answers a picture instead of a
transparent tile. The CSP admits tiles.opensnowmap.org for the GL map,
which reads tiles through fetch.
SKI-02. Ski joins the types a GPX file can be imported as, offered in the
import preview's type field only: TREK routes no ski track, so the planner
never offers it. The preview asks for the discipline on purpose (alpine,
snowboard, cross-country or ski touring, none chosen at first) and, for
cross-country, the technique (classic, skating or unknown); Import waits
until both are named, and the technique stays in sight but dimmed for the
other disciplines. The track is stored exactly as recorded, with its file
name as provenance, its distance and heights from the file and no time:
no ski time is worked out and no hiking estimate stands in for one.
Opened in the planner, a ski track gets a rail card with its discipline on
a tinted tile, a cross-country technique as a badge beside it, the ski time
said as not worked out, and an info dot on what TREK does not say (snow,
avalanches, open runs, and that the 3D gradient colours are no difficulty
or avalanche rating). Change opens a dialog to classify the track again;
only the classification changes, through the offline core, with the
revision it was made at. Planning over the import is not offered for ski.
The existing 3D terrain view, the elevation profile and its focus work on
the track as for any import, with the standard map, topo and satellite and
no via ferratas. Lists, the day plan and the detail show the discipline as
a frosted corner badge on the tile and as a pill with the technique inside;
day assignment, copies and take-overs work as for any tour. The corner
badge is now one component that the winter label shares.
The server keeps tours.ski_discipline and tours.ski_technique (CHECK lists,
NULL on every other type), switches the ski type on without a routing
profile, refuses a ski import without its discipline, a technique outside
cross-country and ski fields on any other type, and takes a planned save's
classification off. PUT /api/trips/:tripId/tours/:placeId/ski classifies a
ski track again (place_edit, 409 on a stale revision, 400 for a tour that
is no ski track) and broadcasts tours:changed. GPX export names the
discipline (alpine_skiing, snowboarding, cross_country_skiing,
backcountry_skiing), and list_tours describes both fields with what a ski
track does not say. Ski is labelled plainly as Ski in every language, so
it no longer reads as ski touring.
RUN-01. Run joins the tour types in the planner, with Running as its first
profile, chosen on purpose like a bike tour's. A run is routed on foot for
runnable, mostly paved ways: tracks and ferries only where there is no other
way (use_tracks 0, use_ferry 0, measured against the public Valhalla), no
hiking limit and no via ferrata. The runner types a pace in min/km; the
running time is the distance at that pace and nothing else, shown under the
field as badges (8 km x 6:00 /km = 48 min). TREK suggests no pace: without
one the time stays unknown and Save waits, text that is no pace or a pace
outside 2:00 to 20:00 is marked. The info dot, the overview and the head say
climbs, descents and difficulty are not in the time, and the time reads as
planned everywhere, so it never passes for a recorded one; the heights are
shown as for any tour on land.
Type, profile, pace and route come back on opening, survive a draft reload,
an undo of the type, a copy and a take-over; switching to another type drops
profile and pace. Day assignment, the 3D terrain view (with topo and
satellite, no ferratas) and a routing failure keeping the last route work as
for every tour. A GPX file can be imported as a run with its profile and no
pace, and planned over as a run. Runs export to GPX as running and get their
own places along the way (water, toilets, parks, viewpoints).
The server keeps tours.run_profile (CHECK list, already holding trail for
RUN-02, since SQLite cannot widen a CHECK in place) and
tours.run_pace_seconds_per_km (120 to 1200), switches the run type on,
refuses a run without a profile and run fields on any other type, and
list_tours names both with what the planned time does not include.