Every journey map (the desktop aside, the phone screens and the shared page)
now carries four switches: Plan, Recorded, Entries and Photos, each with its
count, a spinner while it loads, the warning tone when it could not be read
and the reason when it has nothing to show. A switch only hides, in place:
the map is not rebuilt and keeps its view, and the choice is kept in this
browser per journey (per link on a shared page, by a hash of its token).
The plan draws the places the linked trips put on their days as hollow dashed
pins and the trips' GPX routes dashed; a place an entry was written about is
not drawn twice, the entry's pin carries a check instead. The stays a day
report was taken over from show as dots in the colour of their day. Marks on
one spot join into a disc with their number and open as a list; a picked
place or stay opens a card with its trip, days and times and leads to its
entry. A key beside the switches explains every pin and line and says that
a plan is no proof of a visit. The phone timelines now show the photos too.
The GPX routes come with the map's layers through the linked trips, read
only while the journey's track switch is on; the frozen /tracks answer stays
Studio's. The share settings on desktop and phone get Trip plan and Recorded
routes under Map, off by default and only switchable while the map is shared.
Journey Settings get "Prepare recorded days automatically" under GPX Tracks,
off by default and set by the owner. With it on, the Dawarich background
check also reads the linked trips of the journey for the owner and every
editor with a connection of their own, within the same 400 day reach and
windows as the trip sync, and only for new and changed stays: a trip the
person travels on is not asked twice, and the stays of a trip they are not
on are filed under no trip. Nothing is written into the journey; the stays
wait at their day, and a stay taken over or left out is never offered again.
Under the switch the caller sees when their stays were last fetched, or why
not (no connection, no dated trip, background check off, the reason of the
last failure beside the state still shown), with a "Fetch now" that the
switch also runs when it is turned on. A day of the trips that is not final
yet carries a dot on its take-over button, on the phone in the stay sheet,
and the tooltip says whether it is still running, was fetched before it
ended, was not fetched yet or shows an older state after a failed refresh.
The day review says so for today too.
Server: migration 046180 adds journeys.auto_prepare_recordings and
journey_recording_prep (the last attempt, last success and last error per
journey and person). JourneyRecordingPrepService in the journey domain lists
the prepared trips and keeps the status; DawarichSyncService walks those
trips in the same loop as the person's own and records each journey's
outcome. GET /api/journeys/:id/recordings/prep answers the caller's status
under a @trek/shared contract, the MCP tool get_journey_recording_prep reads
the same, and update_journey takes auto_prepare_recordings like the PUT
contract. The column stays out of the plugin output. All 27 locales carry
the strings; the Journey, Dawarich and MCP tool wiki pages describe it.
A journey day now has a list button in its header beside the route, with the
number of stays still waiting, and the row of the day's Dawarich stays gets a
"Take over day" button; on a phone the journey's More options offers it for
the day of the card shown. The dialog reads the day again from the caller's
own Dawarich and shows the route and the stays on one map, numbered in the
order they were lived and pinned in the colour of the day, beside a list with
times, durations, the stays Dawarich only guessed or is unsure about, the ones
without a position, the entries the journal has on the day and how many people
will see the drafts. When Dawarich does not answer, it says why and shows the
stays of the last sync.
Open stays start chosen, the same place twice in a row starts joined as one
entry under a title and a chosen map position, any two neighbours can be
joined or kept apart, a name can be corrected and a stay left out. "Day
report" turns every chosen stay into one entry that lists them with their
times, at a chosen stay or off the map. The day's route can go along when the
journey keeps none yet. Nothing is written before "Take over N drafts", and a
blank name or title holds it back with the reason. Stays left out are dismissed
and can be restored in the stay list.
The take-over writes drafts only, never touches what the journal holds, and is
one transaction: every stay is checked to be the caller's and of that day, the
entries, the stays they hold and the marked suggestions commit together, and
the entries are announced after the commit. A stay the journey holds already
is reported instead of written twice, so a retry after a lost answer is
harmless; a failed attempt reads the day again and keeps the choices, and a
route that fails after the drafts can be kept again alone.
Server: migration 046170 adds journey_entry_stays (one row per stay of an
entry with its own name, place and times, unique per journey, source, person
and visit, gone with its entry), owned by the journey domain through
JourneyEntryStaysService. The single stay accept records its stay there too,
over REST and MCP alike. DawarichSyncService.refreshDay reads one day's visits
and upserts them without flagging anything missing; DawarichDayStaysService
lists and settles a day's stays. JourneyDayImportService in journey-recordings
serves POST /api/journeys/:id/recordings/:date/stays/review and /import with
@trek/shared contracts, and the MCP tools review_journey_day_stays and
take_over_journey_day_stays run on the same service and checks. createEntry
can write without announcing for a caller that announces after its commit.
The desktop dialog and the phone sheet of the route (JRN-01) and of the
take-over share one frame each. All 27 locales carry the strings; the Journey
and Dawarich wiki pages and the MCP tool list describe it.
A day header in the journey timeline now carries the Dawarich mark for an
editor whose Dawarich answers (dimmed with the reason while offline). It opens
a dialog that names the journey and the day and reads that one local day from
the caller's own connection: a sketch of the route, distance, first and last
time, pieces, gaps without recording, modes and whether tracks or thinned
points answered. The day is cut in the zone Dawarich records in where its
answer shows one, else in this device's, and a picker cuts it in any other.
Nothing is kept before "Keep route". On a phone the same sheet opens from the
journey's More options for the day of the card shown.
What is kept is the preview that was seen: the save reads the day again and
refuses with recording_changed when its hash moved, and the dialog shows the
new version. The same day taken over twice keeps one version and announces
nothing; a different version is replaced only on "Replace", never touching an
entry or text. A failed read throws before any write, so the kept version
stays. Gaps stay gaps: points are split where silence ends elsewhere, and no
day is joined to the one before. The dialog says how many other people will
see the route; editors may keep their own recording.
Kept days show in the day header (distance, whose recording, since when,
still running) and on the desktop and phone journey maps in the colour of
their day's pins, winning over the live trail of their date, and stay drawn
without Dawarich. A trip's GPX track is now drawn dashed as the plan, recorded
routes solid. Shared links do not show recorded days. Remove route asks first
and works without a connection.
Server: migration 046160 adds journey_recorded_days (one row per journey,
local day and source, segments as JSON, zone, window, fetch time, hash,
importer kept past their account). The journey domain owns the rows through
JourneyRecordedDaysService; the new journey-recordings domain takes a day
over through DawarichTracksService.fetchDay, which reads past the cache, asks
a window wide enough for every zone and refuses with DomainErrors. REST under
/api/journeys/:id/recordings (list, preview, PUT and DELETE /:date) with
@trek/shared contracts, and MCP list_journey_recorded_days,
preview_journey_recorded_day, save_journey_recorded_day and
delete_journey_recorded_day on the same service and access. A new user event
journey:recording:updated keeps every open map current. JourneyTrack gains an
optional kind. All 27 locales carry the strings; the Journey and Dawarich wiki
pages and the MCP tool list say what it does.
The unused day pills go, a client-only type stops being exported, the place
form context moves out of the page hook so its view model stays the first
object it returns, the place form test helpers split the stub component
from the plain setup, and four router files are formatted.
A ski tour with a discipline now sends its legs to the piste router and
takes back runs, lifts and trails: each stretch is coloured by its grade
in the area's scheme, links and lift rides down are dotted, and a leg the
router cannot plan stays straight and unrouted with its reason and the one
change that would plan it. Snowshoe and winter hike legs off the piste
data follow summer paths instead, said so. The router's time and heights
are used once every leg is planned, and the options, the build and the
time are saved with the tour.
- skiRouteRepo and api: one request per tour, batched, remembered unless
the answer may change, offline legs failed as offline
- planner: router options per discipline, leg steps and failure rows with
fixes, a piste route summary, draft and reopen keep the options
- admin: switch for the piste router under Tours
- i18n: new ski keys in all 27 locales, ski info and time texts rewritten
The server's src and tests together are past 570,000 lines and the test
typecheck needs about 4.3 GB, over Node's default heap; it now gets 8 GB like
the test jobs. Forty new client files are formatted, and the react-hooks/refs
baseline drops by the one warning a split hook removed.
Settings, Integrations, wanderer gains an optional background check of the
trails you imported, off until you switch it on. While on, TREK reads the
short record of each such trail at most once a day (never its GPX file) and
leaves a hint when the trail may have moved on: "may have changed" when only
wanderer's change time moved, "changed" when its name or description proves
it, and "not checkable" when the trail is gone, no longer yours or carries no
change time. Nothing is ever said to be unchanged. A new hint arrives as a
notification that opens the tour (a new ?place= link in the planner); the
tour's provenance shows it with the source check right beside it, and the
card lists all open hints in a dialog, each leading to its tour. The check
reads the source in full as before and spends the hint; taking a change in
stays the confirmed reimport. No tour is ever changed or deleted.
The check only asks through your own connection, only about trails your
account imported into trips you can still open, and stops when you switch it
off, remove the connection, wanderer refuses the token (until a test passes
or a new token is saved) or the admin switches wanderer off; hints and
snapshots stay. A run asks at most 25 connections for at most 10 records
each, one after another, and an instance that fails (an outage, a rate
limit) is left alone for an hour, doubling up to two days.
Server: migration 046120 adds the switch and the run bookkeeping to
wanderer_connections and the tour_source_hints table (one row per snapshot,
for its importer, gone with it). WandererWatchService and an hourly
wanderer-watch job on the CronRegistrar live in the tours domain and read
through WandererService; GET and PUT /api/integrations/wanderer/watch and GET
/api/trips/:tripId/tours/wanderer/sources/:placeId/hint (place_edit, like the
check) answer with @trek/shared contracts. A new user notification event,
wanderer_source_hint, can be muted per channel. Saving a new token now clears
what the last check said about the old one. There is no MCP tool, as for the
rest of the personal wanderer connection. All 27 locales carry the strings,
and the admin wiki page says what the check does.
A tour can now point at the packing list of its trip, as a whole or at one
of its categories (say "Hiking gear" for a hike), and shows it in its detail.
The new Packing list section reads the list live as the user may see it: the
backpack tile with the item count on its corner and the category's own
colour, how many are packed with a thin progress bar, the first items ticked
off or not with their quantity, how many more there are, and a button that
opens the trip's Lists tab. Who may change the tour links one, changes it or
lets go through a dialog that lists the whole list and every category with
its colour and item count, and writes only on its confirm.
It is a reference, never a copy: the items stay in Packing, are ticked off
and edited there, and each traveller sees in the tour only the items Packing
shows them, so an item kept to oneself never shows through a tour. A
category that is renamed, cleared or only holds items of others reads as
missing, an empty one as empty, a link that could not be read says so with a
retry, and while Lists are switched off the link stays, dimmed, and can
still be let go. Removing the link, or the tour, leaves the list and every
item as they are. Nothing suggests or changes an item by itself.
On the server the link is a row of its own in the tours domain
(tour_packing_links, migration 046110), one per tour and gone with it.
GET, PUT and DELETE /api/trips/:tripId/tours/:placeId/packing-link read it
with the trip and change it with place_edit; linking needs the Lists addon
and, for a category, an item of it the user can see. The writes answer the
tour with its link and tell the trip through tours:changed, so the offline
client queues them as writes of the tour and replays them like one. A copied
trip keeps its tours' links, a tour saved as new or taken over does not.
The MCP tools get_tour_packing, link_tour_packing and unlink_tour_packing run
over the same service and checks; the read also hands the tour's facts as
context for suggesting what to pack, which only becomes an item through the
packing tools. The empty category placeholder now lives in @trek/shared so
both sides leave it out alike. All 27 locales carry the new strings, and
the wiki describes the link and the tools.
A saved tour can now be kept in a collection, apart from any trip, and
later made into a tour of another trip. The bookmark button in a tour's
footer and in the planner's head (waiting for the save while there are
unsaved changes) opens a dialog with every list of the user; a list they
may only read stays in it, dimmed with a lock and a tooltip. The list
keeps an independent copy: the line, the type, every measure and setting,
the waypoints in order with their roles, the origin, and the trip and tour
it was saved from as they were called then. Its days, its links to places
of the trip and its obstacle decisions stay in the trip, and later changes
to the tour do not reach the copy.
A collection shows its kept tours as cards above its places: the grade
tile with the source badge, measures and the waypoint count as badges,
the trip it came from, and who kept it. The owner or an admin of the list
can remove one after a question; tours made from it stay. "Add to a trip"
shows the kept tour on a map with its facts and numbered waypoints, lists
the user's trips (the ones they may not add tours to dimmed), and asks
outright whether the waypoints come along. "Line only" keeps the line as
saved and adds no waypoints; a tour kept without a line can only bring
them. The new tour has an id of its own, no days and no new places, and
names the trip and tour it was saved from; the dialog then offers to open
that trip. Neither the collection nor the original tour changes.
On the server the kept tours are a table of their own in the tours domain
(collection_tours, migration 046100), each row written whole once. Every
copy, the in-trip "save as new tour", the take-over from another trip and
both directions here, now goes through one copy model (tour-copy.helpers)
instead of a second one. Reading and removing follow the collection's
roles, keeping one also needs access to the source trip, and taking one
over needs place_edit on the target trip; the kept tour is read again
inside the write, so one removed meanwhile leaves no half-made tour. The
MCP tools list_collection_tours, get_collection_tour,
save_tour_to_collection, take_over_collection_tour and
delete_collection_tour run over the same service and checks. All 27
locales carry the new strings, and the wiki describes the flow.
A route planned in Google My Maps or Google Earth can now become a tour
without converting it to GPX first. The import button and a file dropped on
the tours workspace take .kml and .kmz files beside .gpx, through the same
preview, the same import routes and the same transaction as a GPX file.
The preview shows every line of the file on its own, numbered, with its
distance and heights; two lines of one placemark are numbered after its name
and never joined. Heights count only where they are heights: kept for an
absolute line, dropped for any other altitude mode and for the all-zero
placeholder My Maps writes, so a missing height stays unknown. What the file
holds besides its lines (pins, areas, overlays, links to other files) is
counted in a dashed card, and nothing is fetched from elsewhere.
The KML reading reuses the place import's codec. A KMZ only ever has its KML
entry unpacked, counted byte by byte against the decompressed cap whatever
its header claims. A file that cannot be read is refused with its reason
(damaged, an archive without KML, too large unpacked), and the toast names
the file and the reason. A KML or KMZ import keeps the gpx origin of a file
import; its provenance names the real format from the stored file name.
With the Tours addon on, the Atlas panel gets a third tab, Tours, beside
Stats and Bucket List: what you have done on your tours across all your
trips. A period (all time, this year, the last 12 months or an earlier year)
and a tour type narrow it; the tab shows the distance large with the number
of tours at its corner, the ascent and descent, and the types with their
distance. "Show tours" opens every tour of the period in a dialog with the
same filters, the sums, the split by type and one row per tour.
What counts is said, never guessed. A tour counts once the day it is on is
over, with the values of the planning, badged "Planned" and explained as
not measured. A linked actual track (ACT-01) replaces those values for its
execution, badged "Recorded" and named, and is never added on top nor
counted as a tour of its own. A tour on several days counts once, a whole
route does not count beside the stages planned from it, a paddle tour sums
no heights, and a value nobody knows stays out of the sum, which then reads
"at least". Only the user's own part counts: a day names them among its
participants, or names nobody on a trip of their own; being able to open
somebody else's trip makes none of its tours theirs. Tours still ahead, on
no day or only on undated days are named as not counting. A tour that fell
through can be left out of the sums ("Leave out"): it stays in the plan
and in the list, dimmed, and "Count again" brings it back. Only the user's
own numbers change.
Server: GET /api/tours/activity-stats answers the user's activity entries
across every trip they can open, and PUT /api/tours/activity-stats/exclusions
leaves a tour out or counts it again (the tour must be in such a trip, else
404). A tour_activity_exclusions table keeps the exclusions per user and
tour. The sums are added up by a shared summary in @trek/shared, so the
Atlas and the assistant say the same numbers. MCP: get_tour_activity_stats
and set_tour_activity_excluded over the same service. The tab reads live
and needs a connection, like the rest of the Atlas statistics.
A planned tour can now be given the track it was actually done with. In the
tour's detail, "Add actual track" opens a dialog that asks for the day the
tour was done on (or none) and a recording of the trip: an import nobody
planned over, or a new one through the existing GPX import, its preview
preset to the tour's type. What the choice measures is shown before anything
is written, and only "Link" writes. The linked track keeps its own name and
source; the detail shows its distance, heights, profile and, only where the
file carried time stamps, the time it took, marked as actual values next to
the untouched plan. A track can be changed or unlinked again.
Server: a tour_activities table points a tour's execution (a day assignment,
or none) at a recording of the same trip, and the tours GPX import keeps the
first and last time of a track whose every point carries one. The values are
read from the recording's own line on every read, so a changed recording
updates them while the plan's line, measures and revision stay as they were.
Every check runs inside the write: the recording must be an import of this
trip not planned over, documenting no other tour; the day must be one of this
tour; a refusal names its reason and changes nothing. PUT and DELETE
/api/trips/:tripId/tours/:placeId/activities answer the detail, which now
carries the actual tracks; the list names them per tour and per recording.
MCP: assign_tour_track and unassign_tour_track over the same service and
checks, get_tour_plan reads the values without the line.
A recording linked as a tour's actual track is no longer counted as a tour of
its own in the trip's tour summary, and the GPX preview imports a city walk
as one instead of as a hike.
A tour can now be a ride (HOR-01). The planner offers "Horse ride" as a
tour type with its own horseshoe, and a Horse routes card beside the
waypoints looks, when asked, for the route=horse relations OpenStreetMap
knows in the map view. A route opens in a dialog that shows it on a map in
the sections it is made of, split at forks, gaps and crossings, so nothing
is ever joined across a gap. The rider picks a section and its direction,
sees what the horse=* tags along it say (open, limited, closed, or unknown
where untagged) and whether it is signposted the other way, and takes it as
one undoable step. A section that does not start where the ride ends is
only joined by a straight manual stretch once the rider switched that on.
Nothing of a ride is routed: every leg follows a section or is drawn by
hand, and the waypoint list and the map say which (a section as a solid
line with its route, a manual stretch dashed and marked unchecked). A point
at a section stays where the route has it, a ride works out no riding time,
and distance, heights, day assignment, GPX import and export, the 3D view
and the reversed ride keep working with each leg's origin saved and opened
again. A failed lookup leaves the ride and the routes already found as they
were.
The server reads the routes through the shared Overpass client
(GET /api/trips/:tripId/tours/horse-routes, Tours addon, trip access),
keeps an answer twelve hours per grid-aligned view, and the tour contract
refuses a routed leg, a via ferrata or a riding time on a ride and a horse
route section on any other type. A migration enables the horse tour type.
SKI-02. Ski joins the types a GPX file can be imported as, offered in the
import preview's type field only: TREK routes no ski track, so the planner
never offers it. The preview asks for the discipline on purpose (alpine,
snowboard, cross-country or ski touring, none chosen at first) and, for
cross-country, the technique (classic, skating or unknown); Import waits
until both are named, and the technique stays in sight but dimmed for the
other disciplines. The track is stored exactly as recorded, with its file
name as provenance, its distance and heights from the file and no time:
no ski time is worked out and no hiking estimate stands in for one.
Opened in the planner, a ski track gets a rail card with its discipline on
a tinted tile, a cross-country technique as a badge beside it, the ski time
said as not worked out, and an info dot on what TREK does not say (snow,
avalanches, open runs, and that the 3D gradient colours are no difficulty
or avalanche rating). Change opens a dialog to classify the track again;
only the classification changes, through the offline core, with the
revision it was made at. Planning over the import is not offered for ski.
The existing 3D terrain view, the elevation profile and its focus work on
the track as for any import, with the standard map, topo and satellite and
no via ferratas. Lists, the day plan and the detail show the discipline as
a frosted corner badge on the tile and as a pill with the technique inside;
day assignment, copies and take-overs work as for any tour. The corner
badge is now one component that the winter label shares.
The server keeps tours.ski_discipline and tours.ski_technique (CHECK lists,
NULL on every other type), switches the ski type on without a routing
profile, refuses a ski import without its discipline, a technique outside
cross-country and ski fields on any other type, and takes a planned save's
classification off. PUT /api/trips/:tripId/tours/:placeId/ski classifies a
ski track again (place_edit, 409 on a stale revision, 400 for a tour that
is no ski track) and broadcasts tours:changed. GPX export names the
discipline (alpine_skiing, snowboarding, cross_country_skiing,
backcountry_skiing), and list_tours describes both fields with what a ski
track does not say. Ski is labelled plainly as Ski in every language, so
it no longer reads as ski touring.
"Add tour" in the planner now offers "Import walk from Google Maps". The
dialog takes the link of a route shared in Google Maps, either a
maps.app.goo.gl short link or the long google.com/maps/dir link, or the
share text of the Google Maps app with the one link in it. It shows the
stops in their order with their names, marks a stop the link gives no
position as such, says that the route comes from Google Maps with a link to
open it there, and that TREK plans the way between the stops itself and
does not take the line drawn in Google Maps over. Nothing is written until
"Load as walk": that opens a new, unsaved city walk in the planner with the
positioned stops and their names, routed on foot by TREK, and warns first
when it replaces unsaved work. A stop without a position is left out and
never looked up or guessed; with fewer than two positions nothing can be
loaded. While the walk is not saved, a calm notice in the planner says
where it came from, also after a reload of the draft. Cancelling or a
failure leaves every tour as it was.
Only a route the link marks unambiguously as on foot is read. A car, bike
or transit route, a link that does not say, or one that says two things is
refused with a reason the dialog gives in the reader's language. Each stop
takes its position from its own block of the link's data, so a line
dragged through extra points or a stop given as coordinates no longer
leaves the stops without positions or shifts them. The road trip and
places imports read links as before.
A short link is followed by a resolver of its own: every hop is checked
against the Google Maps short link shapes and the strict SSRF guard before
it is looked up or asked, so ALLOW_INTERNAL_NETWORK and
ALLOW_LINK_LOCAL_IPS do not open it. Each request goes to the vetted
addresses only, follows nothing by itself, reads no body and carries no
credentials; the chain has one deadline including name lookups, at most
three hops and a cap on the Location header, and the long link it ends on
must be Google Maps and is never fetched. The preview is POST
/api/trips/:tripId/tours/import/google-maps/preview for members who may
edit places, with a 502 when Google could not be reached, and the MCP tool
preview_google_maps_walk reads the same.
The day row on the phone now shows how many stops of a city walk were
visited on that day, "2 of 5 visited", like the desktop row does. Both rows
read it from one place, and a tap on the phone names it in full without
opening the row.
A walk's stops can be checked off, skipped and taken back without a
connection. The mark shows at once, waits in the offline queue and goes out
when the connection is back, in the order the marks were made and behind any
older mark of the same day that still waits. The day plan, the walk's detail
and a reload read the visits kept on this device with the waiting marks on
top, so a mark made offline stays on screen until the server has it. A mark
the server answers with "not found", because the stop, the day or the walk
was removed meanwhile, counts as done and holds back no later mark of that
day. Any other refusal, the Tours addon turned off among them, keeps the mark
as a failed change to try again from the offline settings. The visits are
read again when the connection comes and goes, and once more after the
waiting marks went out, so a mark the server dropped or refused leaves the
day plan. A trip's visits that answer after another trip was opened no longer
show there.
The offline sync keeps each trip's walk visits and reads the stops of a walk
this device has never opened, so it can be checked off offline too. A walk
whose stops this device could not read lists no stand-in stops and no count,
and says to open it again while online. A walk put on a day while offline
says its stops can be checked off once it has synced, instead of offering
buttons that cannot work yet. A mark that fails says to open the walk again
and try once more, in every language.
Marks carry no version, so the last one to reach the server wins, as with
the other changes sent after being offline. The offline guide says so.
The walk's detail opened from a day lists its stops in order, each with its
stay, importance and protection, and marks one visited or skipped for that
day, or takes it back. The day row shows how many were visited. Marks reach
the other travellers at once and change no route, place or order; a copy or
another day starts with none.
The tour type is a dropdown; a bike tour picks its profile, routes for it,
says when a point lies off every way, and shows what it runs on: surfaces,
kinds of way and, for a mountain bike, the trail grades, each pointed at on
the map. A type's own map (OpenHikingMap for a hike, CyclOSM for a bike tour)
is offered while a tour of that type is open, with an admin switch each.
From the planned cards: a hike avoids steep climbs, steps or ferries, nothing
else; a saved tour can be shared where the platform takes GPX files; and the
tours rail adds a tour from one menu: plan new, import GPX, or take one over
from another trip.
The editor gains a card under the waypoints: along the tour. It offers what
the tour type stops for as chips (a hike viewpoints, huts and shelters,
drinking water, food, summits, toilets, picnic spots, campsites, sights; a
paddle tour put-ins, boat rental and the like, the first three ticked) and
how far from the route to look, 250 m to 2 km. Only its button searches.
Each place found shows how far it lies from the route, straight across, and
where along the route; its pin is on the map in its category's colour, and
a click there opens it in the card. Opened, a place says its kind and
source, its address, opening hours as the source has them with a note to
check them, and its website. The answer says when it is out of date (the
route or the choices changed since), offline, failed, partly searched, cut
short at the first part of a long tour, or more than shown. Nothing about
the tour changes by searching.
An opened place can go in as a stop: after the point chosen, the one before
it along the route suggested, by the button alone, as one step undo takes
back. It becomes a stop of the tour on the place's spot, not a place of the
trip. A leg drawn by hand or a fixed line (a via ferrata, a portage) is not
cut: the point after which it would go says why and offers no button. Once
the new route is in, the card says what the stop added, as the difference
of the route planned before and after; while it is planned it says so, and
where either route could not be planned it says that rather than guess.
The search merges a place OpenStreetMap maps twice, as a point and as its
outline, by its name and spot. The library repository takes its offline
error from a shared online-only module, which the search uses too.
The Tours tab's list of the trip's tours gains a button beside the GPX
import: take a tour over from another trip. Its dialog lists the tours of
the user's other trips, searched by name and filtered by trip and type,
each with its trip and the measures it has (time, distance, ascent; one it
lacks is left out, a paddle tour's climb too). Choosing one shows it on a
map with where it comes from, its type, distance, time, heights and number
of waypoints, and the name it gets in this trip, its own name to start
with. The note under the name says the copy is a tour of this trip of its
own, on no day yet, and that later changes stay apart.
Only the button in the foot takes it over. The new tour then comes into
the trip's lists and map and opens in the editor, unless the editor holds
unsaved work, which it never replaces. Nothing is written before the
confirm, and closing writes nothing. The library is online only: offline,
or when the list fails, the dialog says so and offers to try again; a list
cut at 100 tours says to search or filter.
A tour taken over names its source in its provenance: "Taken over from"
with the trip and the tour as they were called then.
While a hike is planned, the planner's map switch offers "Hiking" beside the
map, topo and satellite: OpenHikingMap, with marked trails over the terrain.
It is a choice of the planner's view alone, like topo: the global map
setting, the tour and its days stay as they are. With no tour open, over an
import viewed as it came in and for a paddle tour it is not offered, and a
choice made earlier falls back to the standard map there.
openmaps.fr's tile usage policy is followed: tiles load only as the map
shows them, with the browser's Referer, from the server's own caching; no
service worker rule keeps them and the 3D flyover's warm-up passes their
source by. Its credit and donation link are on the map; the 3D map, whose
attribution is folded away under the panel, shows them as a line of its own
above its controls.
The service is best effort. A run of failed tiles while it is shown marks
the switch, with a tooltip and a status for screen readers that say it is
not answering and that the tour is untouched; one tile arriving clears it.
The tile health the seamark overlay had is now useTileHealth, shared by both.
The source is free for non-commercial installs up to 500,000 tiles a month.
tours_hiking_map_enabled is an admin switch under Tours (admin tours-hiking-map,
audited), on by default, for an install that is commercial or larger to
switch off until it has an agreement with the operator. /api/addons carries
it as toursHikingMap, true only while Tours is on.
Leaflet, GL and the 3D map read one table of the planner's raster bases
(tourRasterBases), so topo and the hiking map are drawn the same way.
tile.openmaps.fr is on the CSP's connect-src for the GL maps.
A saved tour can be handed over as a GPX file on purpose: its whole saved
line as one track with the heights it has and none it lacks, its name,
description and link, and the activity in <type>. The file is named after
the tour. A tour without a line of two points is refused with 422 rather
than written as a file that imports as nothing; the export changes nothing.
GET /api/trips/:tripId/tours/:placeId/export.gpx, readable by anyone who
sees the trip, and the MCP tool export_tour_gpx with the same rules. The
tour detail gets a "GPX" action beside the navigation, the planner head a
download button that waits while the tour has unsaved changes.
The tours rail head now uses the same plain icon buttons as the editor.
Paddle tours are planned on the water by TREK's own router: a water network
per paddle region, built from the same Geofabrik extract as the obstacles and
searched in a worker thread of the server (no sidecar). Rivers, canals and
lakes (direct or along the shore), portages round weirs, locks by policy,
whitewater by boat, gaps marked. Found portages and locks become points of
their own; an unplannable leg says why and offers a way out.
- Shaping points: a click on the line sets a point that steers the route
without being a stop (hikes and paddle tours); recompute a single leg.
- Lake style direct/shore, suggested from the wind forecast.
- Regions load by themselves where a paddler plans (admin setting: automatic,
on request, off; size cap and a daily count), with requests for the admins,
a notification, and the load followed on the leg.
- Portage from the last point, portages follow footways via the walking
router (or stay straight), "put in here" on slipways and put-ins.
- MCP plan_paddle_route with the REST route's rules.
The Share button becomes the trip's Settings, a round button beside the back
pill. The dialog is rebuilt around three areas (People, Sharing, Journal) with
a side navigation, a fixed height and 960 px width on wide screens.
Journal links one of your journals from the Journey addon to the trip. Every
trip member is ticked as a reader by default, each can be raised to editor or
left out, and the people a save would let in for the first time are named
before it saves. The link can be changed or removed. With a link the trip gets
a Journal tab on desktop and phone that shows the Journey addon's own view,
live through its sync and trip:journal:changed. Nothing shows with the addon
off.
members.shareTrip and nav.share are gone with the button that used them.
PAD-06 and PAD-09 on the client's data side. A tour's cached row keeps its
checklist beside its provenance, written through one cache helper by the
repository and the queue replay, which also keeps provenance an answer
lacks. The checklist is read for the bench the list shows and served from
the cache while its revision matches. Decisions made offline, or behind a
queued write of the same tour, change the cached checklist and bench at
once under a local revision and replay with their idempotency key; a route
written offline marks the checklist stale until the server judged it.
The obstacle store learns a camera focus: a click in the rail moves the
camera onto an obstacle and the other parts of its lock, the newest of such
a focus and a picked search result wins, and a selected lock lights up
whole on both maps. The checklist hook and its model hold the logic the
cards will show.
PAD-05B: a click on an obstacle on the map or on the route band opens its card in the look of the via ferrata card: the kind with its glyph, the name, how it stands to the route (on it at a distance along it, near it with the link marked unclear, or only in the area), the paddling rule its tags give with canoe read before boat, a condition as written, height, grade, hours and fees, the source with the date of the data and the OpenStreetMap link. A missing rule reads as unknown, never as allowed, and a portage way recorded as private says so. Objects only in the area show from zoom 13 on, on Leaflet and GL alike; on GL the lines only near the route are dashed as on Leaflet, one click handler picks the marker over the line, and a picked marker no longer flickers. The route band marks the obstacles on and near the route by their share of the measured line. The obstacle notice also names an answer cut at its limit.
PAD-05A: the admin area gets a Paddle water data card under the addons, on desktop and phone: a search in Geofabrik's list with each region's path, the regions with their state (waiting, reading with its progress, ready with objects and data date, failed with the reason), reading again and removing after a confirmation. The list follows a read without reloading. Region changes write audit rows.
Map colours of paddle objects and portages come from theme tokens read at draw time, as the via ferratas do; the ferrata layer now shares that reader. The rail takes the planner page's parts as one bag, the map hit tests of the tour layers are one helper, and the unused noWaterData string is gone from every locale.
PAD-03 portages and locks on planned tours and recorded tracks, PAD-07 paddle time with portage and lock stops, PAD-08 wind forecast for the start, PAD-05A regional obstacle import from Geofabrik extracts with admin endpoints and a monthly refresh, PAD-05B first cut of the obstacle layer on Leaflet, GL and 3D. Work in progress: checklist (PAD-06), check bench (PAD-09), admin UI, translations and tests follow.
- Paddle as a plannable tour type: one boat (kayak, canoe, SUP, other), river or
lake, a pace that a boat change never overwrites; time is distance over pace
- Hand-drawn legs beside routed ones, drawn dotted and labelled as not routed,
kept through save, reopen and edits elsewhere
- Reverse a tour and close it back to its start, each one undo step
- GPX import shows a preview first (line, measures, duplicates, type) and only
the confirmation stores the tour
- Base maps and overlays per tour type in the planner: hike keeps topo and the
via ferrata layer, paddle gets the OpenSeaMap seamark overlay
- P2C-02: tours record their origin (planned, GPX with file name, wanderer)
instead of reading it off their shape; the detail answers a provenance
contract and a trip copy keeps a tour's import record
- MF-03: a wanderer snapshot's source can be checked on purpose, read only,
with a confirmed reimport as a new snapshot
- PR1-18: every way of putting a tour on a day shares one set of rules
- PR1-07/08: each person can hide tours from the trip map; the list shows
each tour's line colour and the picked tour stands out on both maps
The admin switch for wanderer moves to api/wanderer.ts and the recorded
track restore to api/recordedTrack.ts; trips.service.ts keeps dev's
formatting with only the derived-from remap on copy.
- GPX files drop onto the map or a day; the import lands on that day
- wanderer connection per user in Integrations; the workspace offers the
user's own trails only, behind an admin switch under the Tours addon
- wanderer difficulty is stored on the SAC scale (T1 to T3), backfilled
- a GPX or wanderer import can be planned as an editable tour, either in
place (the recorded track is kept and can be restored) or as a new tour
that remembers the import it came from
- rails, rows and detail dialog follow the plan sidebar's cards and badges
- admin addon shelves with more than one row fold, collapsed by default
- reverse-geocoded waypoint names are cached on the device
reservation:positions was on the ignored list, while the stop order the same
reorder sends was applied, so in other tabs and for other members the bookings
sat between the wrong stops until a reload. The event now writes the slots the
way the mover's own list did, for the day it names (day_id from REST, dayId
from the MCP tool) or as the global slot without one, and caches them offline.
A booking handed back by an edit or a reservation:updated event without day
slots keeps the ones it had, in the store and in the offline cache.
Refs #2631
A tab kept open across a deploy ran the previous build until its next
start. The server now names its version in the realtime welcome frame,
which every open client reads again when it reconnects after the
restart a deploy brings. When that version is not the build the page
runs, a notice offers to reload. The reload goes through the same
service worker handover a launch uses: it waits for the new worker to
take over, or for a short timeout, and records the version only when
the takeover happened.
The notice reads the error boundary's texts for the same situation, so
every language has it already. It is one component for both shells,
sits above the offline pill, stays away offline and after a reload for
that version that did not bring it, and can be closed for the session.
A connect still waiting for its ws token when the user logged out went on
to open a socket authenticated as that user, which the next login on the
same browser then reused. And a socket in its reconnect backoff waited up
to 30 s after the network came back or the tab became visible. Both
events now reconnect right away.
Admin > Notifications gets a Defaults for users matrix: each event and channel starts On, Off (a user may still turn it on) or Blocked (off for everyone). A user's own choice is kept against the default, and a value equal to it is stored as no row, so a later change of the default reaches everyone who never chose. Blocked cells show as locked in the user settings on desktop and phone, and the server ignores any attempt to turn one on. (#1536)
Admin > Settings > Google options gets a daily limit with today's count beside it. Every call through the Places and Routes clients is counted per UTC day; once the limit is reached the Google key reads as absent until the next day, so search, details and photos fall back to OpenStreetMap the way a keyless install does, and the admin sees that the day is used up. (#1582)
Small requests from the discussions, each built end to end: planner and
map (cycling mode, date first headings, clear a day, stay times per day,
off-route stops, map lock, compact unplanned markers, pending stays,
cable car, transit quick picks), places (location filter, category from
OSM, open in maps, geo: link, image from an attachment, enrichment on
file import, places near a pin, place name language, Amap first in
China), lists and costs (packed counter, inherited sharing, Markdown
to-dos, payment notes, bookings CSV, my plan PDF), sharing (unplanned
places, travel only, without photos), journey (photo zoom, drafts,
photo order, trip suggestion, day jump), atlas (region counter, region
bucket list, places per country), vacay half company holidays, studio
copy and paste plus the book's own layouts, and RESTORE_FROM_BACKUP for
a first start restore.
Whether the AI Parsing model reads images is an admin setting now, and it
lands with the two features that send a photo, so it has something to
control.
The setting is `vision: 'auto' | 'on' | 'off'` on the addon config. On
Automatic a local Ollama is asked what the model can do (`/api/show`), and a
cloud provider means no; Yes and No are applied as set. The old `multimodal`
flag is not read: the admin screens wrote it false on every save, so a
stored false meant nothing. The per-user toggle keeps its on/off meaning and
is read by the extraction now. The lookup is server-side only: capped read,
validated body, never throws, cached per server and model.
GET /api/llm/capabilities answers it for the signed-in caller, and both
photo pickers below ask it.
The booking import takes JPG, PNG and WEBP when the model reads images.
The photo goes as an image to every provider (image_url, an Anthropic image
block, Ollama's native chat with `images`), capped at 1600px, and skips KDE
Itinerary. A scanned PDF, which used to reach the model as empty text, has
its first two pages drawn by pdf-parse and sent the same way. The rest is
the import as it was: background job, review, the file attached to the
booking, the linked cost. On a real qwen3.5:4b a train ticket came back as
bare clock times until the router gave the model every type's field
meanings, and its price as an object inside a string, which read as 4900;
both are handled.
Costs gets Scan receipt: a dialog laid out like the booking import's takes
one photo, read on the import job queue, then reviewed in the existing
expense editor pre-filled with merchant, total, currency, day and lines,
the photo waiting in Receipts & Invoices to be uploaded on save. No table,
no migration, no category guess, no document-type detection.
A foreign expense without a frozen rate is converted with today's rate.
When the server could not fetch rates itself, it counted the amount 1:1
in the trip currency, although the browser had the rates all along. A
VND bill on an AUD trip was settled as millions of AUD.
Such a row is now left out of the balances, flows, final budgets, trip
totals and per-person summaries. The settlement reports it under
`unconverted` and says which currency its figures are in; the trip
summary lists the ids and the budget prompt says how many are missing.
The browser lends the rates it already holds (`fallback_fx`) when it
saves an expense or a settle-up transfer, and to heal existing rows
through the new POST .../budget/freeze-rates route, which an editor's
Costs view calls for the rows the settlement left out. The server still
prefers its own rate, uses a lent one only while it is quoted against
the trip currency, and never replaces a frozen or explicit rate. The
settlement also takes the browser's display rate (`base_rate`) in place
of a display quote the server cannot fetch; the browser leaves out a
figure the query would refuse. The browser's own fetch gives up after
10 s.
Changing a row's currency while no rate is available no longer keeps
the old currency's rate; the row goes back to unfrozen.
MCP gets the same through the new freeze_budget_rates tool, which only
ever pins the server's own rate.
A searchProvider plugin can now implement an optional suggest() beside
search(). Its places then show up in the place search's typed-ahead list,
after the core suggestions and marked with the plugin's name, on desktop
and phone. An index that cannot take a request per keystroke leaves it
out and keeps answering the full search only.
The child reports which functions each hook object carries at load, so
GET /api/plugin-search/suggest only asks the plugins that implement
suggest: from the second character, three rows at most across all of
them, 800 ms to answer. The feed marks plugins holding
hook:search-provider and the client only asks the route while one is
installed. A plugin row carries its whole place, so picking it skips the
details lookup, which knows no plugin id. The phone's search results now
name their source as the desktop ones do, and the desktop dropdown
scrolls instead of running past the dialog.
Addresses discussion #2221.
A new manifest capability poiCategories (up to 4, icon from an allow-list,
strict #rrggbb color) and the hook poiCategoryProvider.getPois behind the
hook:poi-category-provider permission. GET /api/plugin-pois in the plugin
contributions module answers them in the /api/maps/pois shape, with
search_plugin_pois as the MCP twin. plugin: ids no longer count as Google
place ids. SDK 1.8.0 carries the types, validation and docs.
On the map, one hook merges the built-in categories with the ones active
plugins declare, and the pill shows the plugin chips after a divider on
desktop and phone, scrolling sideways instead of shrinking a chip below
its touch target. A plugin chip searches through a repo that refuses
offline and parses the answer strictly. Its pins, on Leaflet and GL, use
the category's own icon and color, both checked again before they reach
any markup, and the hover card lists the plugin's details as escaped
text. A plugin POI can be added as a place like any other. The admin
panels on desktop and phone show a chip for the new permission and the
categories a plugin would add, from one shared module.
Addresses discussion #1781.
The photo picker's Select all took only the pages already loaded, 50 at a
time, and replaced whatever had been picked on another tab. It now loads
the rest of a day, trip or date-range search before selecting (cancelled
by closing the picker or switching tab), adds to earlier picks, and
Deselect all only clears what is in view. Add stays disabled until that
loading is done. The whole-library tab keeps selecting what is loaded and
shows the count as "N+".
A date-filtered Immich search stopped at 1,000 photos without a word,
because its page budget was absolute; it is now relative to the page
asked for, with an absolute ceiling of 270 raw pages sized so the
picker's deepest page still gets a full answer. Adds go out in batches of
500 ids, under the JSON body limit, and each batch is sent oldest first,
so photos land in an entry in the order they were taken. When a later
batch fails, the photos already saved are counted and the journey
reloads while the error still shows, through one hook for desktop and
phone.
After a provider add, the capture-time lookup runs at most four at a time
per user, shared by all of that user's batches. When it fills a row, a
journey:photos:updated event reloads open journeys once per batch, from
the REST routes and the MCP add tool alike. Device uploads, which arrive
one file per request, get the same lookup without the event.
Addresses discussion #1587.
A fourth built-in channel next to email, webhook and ntfy. Browsers
register per device, the server encrypts per RFC 8291 and signs per RFC
8292 with node:crypto and sends only to known push services through the
SSRF guard. The event matrix decides per category what arrives by push;
admins switch the channel on under Notifications.
VAPID keys come from the environment or are generated once, only while
neither stored row exists, and kept encrypted. A pair that does not
decrypt or match is never overwritten and never swapped for another one:
push stays off with an error in the log and every device stays
registered until the key is fixed. The subject is VAPID_SUBJECT, then an
https APP_URL, then the project URL.
Only chat messages collapse into one notification per trip, and a
replacement still alerts. A 403 removes a device only after three
failures in a row; 404 and 410 remove it at once. Password change, reset
and an admin setting a password drop the user's devices with the other
credentials. The request log redacts subscriptions and endpoints, boot
errors print *** for every secret variable, and logout forgets the
device with a plain fetch so an expired session cannot redirect midway.
Addresses discussion #894.
Maurice