* chore: bump version to 3.0.0 [skip ci]
* fix: resolve dead wiki links across install and config pages
* fix(reservations): restore correct day assignment for non-transport bookings
v3.0.0 switched the planner from rendering reservations by
reservation_time to rendering them by day_id (commit 3f61e1c), but
migration 110 only backfilled day_id for transport types. Tours,
restaurants, events and 'other' bookings kept whatever day_id was
stored in the DB — often the trip's first day, from older code paths
that defaulted it there — so after the upgrade those rows all show
up on day 1 regardless of their actual reservation_time.
- Migration 122: for every non-hotel reservation, null out any
day_id / end_day_id that does not match the reservation's time,
then backfill it from reservation_time / reservation_end_time.
Idempotent; leaves already-correct rows alone.
- reservationService.createReservation / updateReservation now
derive day_id / end_day_id from reservation_time /
reservation_end_time when the client didn't send one explicitly,
so the mismatch cannot reappear on new or edited bookings.
Hotels are skipped because they store their date range on the
linked day_accommodation.
* chore: bump version to 3.0.1 [skip ci]
* fix(oidc): normalize discovery doc issuer before comparison
Trailing slash in doc.issuer (e.g. Authentik) caused a mismatch against
the already-normalized configured issuer, breaking OIDC login entirely.
Closes#834
* test(systemNotices): exclude v3 upgrade notices from login_count-only tests
Tests that expect an empty notice list were using first_seen_version='0.0.0'
(DB default), which matches the existingUserBeforeVersion('3.0.0') condition
now that the app is at 3.0.1. Set first_seen_version='3.0.0' so only the
firstLogin condition controls visibility in these tests.
* chore: bump version to 3.0.2 [skip ci]
* fix(oidc): normalize id_token iss claim before issuer comparison (#837)
jwt.verify does an exact string match on the issuer. Providers like
Authentik include a trailing slash in the id_token iss claim while the
configured issuer is already normalized (no trailing slash), causing
every login attempt to fail with jwt issuer invalid.
Move the issuer check out of jwt.verify options and apply the same
trailing-slash normalization used in the discovery doc validation.
Also adds OIDC-SVC-033–036 unit tests covering exact match, trailing
slash, wrong issuer, and wrong audience cases.
Closes#834
* chore: bump version to 3.0.3 [skip ci]
* fix(oidc,ui): restore Authentik login and fix mobile delete dialog (#845)
OIDC: when OIDC_DISCOVERY_URL is explicitly set, trust the discovery
doc's issuer for id_token comparison instead of rejecting a path
mismatch as an error. Authentik (and similar realm-path providers)
return a canonical issuer like /application/o/<slug>/ that differs
from the operator's base OIDC_ISSUER. Strict equality blocked login
in 3.x despite working in v2. Default discovery (no custom URL) keeps
the strict check. Adds OIDC-SVC-037/038/039.
UI: ConfirmDialog and CopyTripDialog lacked the --bottom-nav-h
paddingBottom offset that other overlays already use. On mobile portrait
the action buttons were hidden behind the sticky bottom nav bar.
Closes#843Closes#844
* chore: bump version to 3.0.4 [skip ci]
* fix(files): open attachments only in new tab (#840)
window.open with noreferrer returns null, which triggered the popup-blocked download fallback in addition to the new-tab open. Use a target=_blank anchor click instead.
* chore: bump version to 3.0.5 [skip ci]
* fix(journey,pdf): journey reorder sort_order + PDF multi-day transport (#848)
* fix(journey): make sort_order authoritative for within-day entry ordering
Reorder buttons appeared broken because the server ORDER BY put entry_time
before sort_order, so entries synced from trip places with differing times
would always sort by time regardless of sort_order writes. The client store
mirrored the same comparator, making even the optimistic update invisible.
- Change ORDER BY to (entry_date, sort_order, id) in getJourneyFull and listEntries
- Fix syncTripPlaces and onPlaceCreated to assign MAX+1 sort_order per day instead of day_number/0
- Update client store comparator to match
- Add DB migration to backfill sort_order using old effective key (entry_time, id) so existing journeys retain their visual order
- Add tests: JOURNEY-SVC-089–093, FE-STORE-JOURNEY-018–019
Closes#846
* fix(pdf): include multi-day transport return/arrival in PDF itinerary (#847)
Reservations were matched to days by pickup date only, so the end-day
card (e.g. car Return, flight Arrival) was silently dropped from the PDF.
Add span-aware helpers mirroring DayPlanSidebar logic: match by day_id/end_day_id
span, show reservation_end_time on end days, prefix title with phase label
(Return/Arrival/etc.), and use per-day position for sort order.
* test(pdf): add missing day_id to transport reservation fixture
* chore: bump version to 3.0.6 [skip ci]
* [Snyk] Security upgrade uuid from 9.0.1 to 14.0.0 (#849)
* fix: server/package.json & server/package-lock.json to reduce vulnerabilities
The following vulnerabilities are fixed with an upgrade:
- https://snyk.io/vuln/SNYK-JS-UUID-16133035
* fix: bump fast-xml-parser version
---------
Co-authored-by: snyk-bot <snyk-bot@snyk.io>
Co-authored-by: jubnl <jgunther021@gmail.com>
* chore: bump version to 3.0.7 [skip ci]
* fix: hot fixes 23-04-2026 (#856)
* fix(packing): resolve avatar URL path in bag and category assignees (#854)
packingService was returning raw avatar filenames from the DB instead of
the full /uploads/avatars/<filename> path, causing broken profile images
for users with uploaded avatars.
* fix(budget): use Map.get() to fix category rename no-op (#855)
* fix(security): relax Referrer-Policy and document HSTS_INCLUDE_SUBDOMAINS (#862) (#863)
- Change Helmet default from no-referrer to strict-origin-when-cross-origin
so browsers send the origin on cross-origin requests, allowing Google Maps
API key restrictions by HTTP referrer to work correctly
- Document HSTS_INCLUDE_SUBDOMAINS in all deployment artifacts:
.env.example, docker-compose.yml, README.md, unraid-template.xml,
charts/values.yaml, charts/configmap.yaml, wiki/Environment-Variables.md
* fix(planner): prefetch budget items on trip page mount (#864)
Loads budgetItems alongside reservations when TripPlannerPage mounts so
the Budget category dropdown in ReservationModal and TransportModal shows
pre-existing categories on first open, regardless of whether the Budget
tab has been visited.
Closes#861
* fix(reservations): prevent Invalid Date when end time is set without end date (#866)
When reservation_end_time held a bare time string ("HH:MM"), fmtDate()
produced Invalid Date on the reservation card.
- Modal: when end date is blank but end time is filled, construct a
same-day ISO datetime using the start date (prevents time-only strings
from ever being persisted)
- Panel: derive endDatePart via regex so date-only end values ("YYYY-MM-DD")
still show the multi-day range, while bare time strings are skipped and
handled correctly by the existing time column logic
Closes#860
* fix(planner): format reservation end time instead of rendering raw ISO string (#867)
Closes#859
* fix(planner): wire Route toggle into mobile day sidebar (#850) (#868)
The per-booking Route icon was missing on mobile because the mobile
DayPlanSidebar invocation in TripPlannerPage didn't pass
visibleConnectionIds or onToggleConnection. Mobile PWA users couldn't
activate reservation map overlays without forcing desktop mode.
Also corrects the Map-Features wiki: fixes the setting name
("Booking route labels" not "Show connection labels"), documents the
route_calculation requirement for travel-time pills, and explains that
overlays are off by default and must be toggled per reservation.
* chore: bump version to 3.0.8 [skip ci]
---------
Co-authored-by: Maurice <61554723+mauriceboe@users.noreply.github.com>
Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Co-authored-by: Maurice <mauriceboe@icloud.com>
Co-authored-by: Xre0uS <36565320+Xre0uS@users.noreply.github.com>
Co-authored-by: snyk-bot <snyk-bot@snyk.io>
updatePhoto: write sort_order to journey_entry_photos (junction) not journey_photos,
since JP_SELECT reads jep.sort_order — updating the gallery row had no visible effect.
deletePhoto: include id in return value so callers that check deleted.id still work.
Tests updated for new schema:
- journeyShareService: insertJourneyPhoto helper now inserts into journey_photos
(keyed by journey_id) + journey_entry_photos junction instead of the old
entry_id-keyed table
- SVC-081: deleteEntry cascades junction rows (journey_entry_photos), not gallery
rows (journey_photos); assert junction is gone, gallery is preserved
- SVC-086: syncTripPhotos now populates the gallery directly — no [Trip Photos]
wrapper entry; assert journey_photos gallery row instead
- INT-028: error message updated to 'journey_photo_id required'
Mobile UI:
- #722 timeline carousel no longer cut off by BottomNav (uses --bottom-nav-h var)
- #723 scroll-snap-type relaxed to proximity so small swipes no longer skip entries
- #724 defensive padding-bottom fix in JourneySettingsDialog for iOS PWA
- #725 add back/settings buttons + journey title subtitle to mobile activity view
- #726 active entry re-centers after scroll settle; tap inactive card activates
it (does not jump straight into editor)
Entry editor flow:
- #727 photo uploads queue locally until Save for existing entries too
(previously fired upload immediately; Cancel silently kept the new photo)
- #728 Cancel/Close with unsaved changes now requires confirm (window.confirm)
- #729 linking a Gallery photo into an entry now copies the row (old MOVE
behavior meant Remove-from-Entry also nuked the Gallery original)
- #731 addPhoto / addProviderPhoto / linkPhotoToEntry promote skeleton
entries to concrete 'entry' type when content is added
Permissions:
- #732 updateJourney switched from canEdit to isOwner — editors can still
edit entries and photos, just not the journey shell (title, cover, status)
- #733 Contributors list gains a per-row remove (X) control with confirm
- #734 my_role is computed server-side and returned with the journey; UI
gates Settings/Add/Edit/Delete controls based on role
- #736 createOrUpdateJourneyShareLink + deleteJourneyShareLink now require
isOwner (previously NO permission check at all — anyone authenticated
could publish or unpublish a journey)
Immich upload (#730):
- migration 111: add users.immich_auto_upload (default 0)
- migration 112: seed provider_field for the toggle (idempotent, FK-safe)
- journey photo upload only mirrors to Immich when the user has opted in
- Settings UI gets a "Mirror journey photos to Immich on upload" checkbox
Test updates:
- JOURNEY-SVC-019 inverted to assert editor cannot update journey settings
- JOURNEY-SHARE-007 now passes userId (owner) to deleteJourneyShareLink
- FE-PAGE-JOURNEYDETAIL-148 inverted to assert photos stay pending until Save
- client/tests still green (2676/2676)
Also fixed en route: gallery entry title is now the literal 'Gallery' on the
wire (used to send the translated label, which broke server-side title === 'Gallery'
checks in non-English locales); confirm interpolation uses {username} single
braces matching the existing i18n runtime; Settings footer uses icon-only
delete/archive buttons on mobile so the row doesn't wrap.
Thread selectedAlbumPassphrase from ProviderPicker through onAdd →
journeyApi.addProviderPhotos → POST /entries/:entryId/provider-photos →
addProviderPhoto service → getOrCreateTrekPhoto so shared-album photos
have their passphrase encrypted and persisted on trek_photos at add-time,
enabling streamPhoto to forward it to Synology correctly (#689).
- Revert filled skeleton entries back to skeleton on delete instead of permanently removing them
- Add per-user hide_skeletons preference on journey_contributors (migration 99)
- Add PATCH /journeys/:id/preferences endpoint for toggling skeleton visibility
- Add Eye/EyeOff toggle button with custom tooltip in journey detail header
- Filter skeleton entries from timeline when hidden
- Add i18n keys for all 14 languages
trek_photos is now the central registry; trip_photos and journey_photos
reference it via photo_id FK. Updated all affected test helpers and
direct-SQL assertions to join trek_photos instead of querying stale
columns (asset_id, provider, owner_id) on the leaf tables.
Also fix ATLAS-UNIT-019: getVisitedRegions now fires background geocoding
and returns immediately, so the test must call it twice — once to trigger
the fill, once after advancing fake timers to read cached results.
Julien G.