A final pass over the feedback commits found two gaps in the phone map.
The planner keeps a point it was asked to show until its next routing
round, and once the fuel offers or the other roads for a leg close it hands
that very array back. MMapArea read it as a new focus, so closing either one
flew the camera to the stop "Show on map" had pointed at, on another day's
stage too. holdFocus now remembers the arrays it already held and only
takes a new one as a focus, with the open picker's own roads as the one
exception.
The all days view still took its pins from the planner's planned list,
which on a phone leaves out booked nights and hidden service stops, so the
drive ended at a hotel with no pin to open it from. It now reads the places
of the stored visits, like the stage does.
The desk offers alternative routes from the drive band between two stops;
the phone had nothing. A leg in the phone chain now carries one round
button that asks the router for other ways and switches to the map, where a
bar takes the stage bar's place: the ways as chips with their colour, time,
distance and what sets them apart, and a confirm button. On glass there is
no hover, so a tap on a chip or on a line only previews that road; confirm
writes it. The button shows only where the desk offers it (a routed leg
between chosen stops), for someone who may edit the day, and not offline,
since vias are written online only.
The picker could not have stayed open on a phone at all: the planner closed
it whenever road trip mode was off, and that mode is off on a phone by
design, so the next render shut it. The close now follows where the picker
can be seen (road trip mode on the desk, the road trip tab on a phone), and
useRouteAlternatives returns a memoised object.
The rules both shells need are shared: legReroutable in the row model,
alternativesPhase and alternativeSubline next to the overlays, and the desk
bar and sidebar read them too with no visible change. Both map engines take
an optional fitPadding, so the phone frames the leg between the day chips
and the bar instead of under them.
The credit button sat in the middle of the round controls band, beside the
locate button. On the trip map it now has the bottom right corner to
itself, a gap above the dock (or above the stage bar on the road trip
tab), and the band floats one credit row higher, so the switcher, the
compass and the locate button stay on one line.
MMapArea marks its layer as a credit corner and defines the floor the map
ends at; mobile.css places both GL engines' compact control there, keeps
an opened GL credit's button in the corner, moves the Mapbox wordmark into
the same row instead of under the compass, and unfolds the Leaflet credit
to the left of its button. MapAttributionToggle reads the same two
variables with today's values as the fallback, so the other phone maps and
the desktop keep their placement.
The stage bar over the road trip map joined its figures with middle dots
and led with a bare day colour dot. It now leads with a picture of the
place it names (PlaceAvatar, falling back to the category icon), ringed in
the day colour while day colours are on, and shows the stop count, the
arrival and the distance as badges. The header pill over the tab does the
same with the day and the distance, and leaves out a distance nothing has
measured yet instead of printing 0 m. Both bars carry an accessible name
built from their parts, because pills side by side lose the spaces between
them when a screen reader reads them out.
The badges are a new non interactive MBadge, a span, since every place it
sits in is itself a button. The value rules shared by both bars live in
stageBadges.ts.
The head card at the top of the chain is more compact: the drive and the
stop count ride on the date line as badges, the two clocks are a size
smaller and the separate stats band is gone. The day colour dot is gone
from it: on the list half the line it keys lies hidden under the chain, so
it read as an unexplained status light.
The bar over the road trip map names a place, but a tap on it switched to
the whole day's chain and the place never opened. It now opens that stop's
sheet, the one its row in the chain opens. Its name, clock and tap come off
one row (stageEnd), so the bar no longer pairs the destination with the
automatic day end's clock (Kyoto Station 22:00 while the head card said
12:40). The header's list switch stays the way back to the chain.
A pin on the stage went through the plan tab's marker click, which moves
the place selection and brought up the plan tab's place card. On the road
trip tab a pin now opens its stop on the stage card, or the first routed
visit in the all days view, and only a place no routed day stops at still
gets the place card. The handler keeps one identity for the life of the
map. "Show on map" in the stop sheet and the up next card move the camera
through focusRoadtripPoint instead of the selection, picking the stop's
card first when it is not on screen. A pending focus now lets go once the
day moves, so later stages frame their own drive again.
Stage pins come from the trip store instead of the plan tab's map list.
That list carries the plan tab's day declutter and place filters, so after
the all days switch and back most pins of the next stage were missing, and
the unplanned filter or hidden service stops removed stops the chain draws.
The stop sheet had no way into the place, so a fixed time could not be set
from the road. A pencil in the header now hands over to the place editor
the plan tab uses, with this visit in context, so Start (the time the chain
anchors on) can be set or cleared there. It shows with place_edit, once the
place row resolves from the whole trip store and the visit carries a server
id. No second writer for the time is added.
Opening the editor on a booked night or a service stop the day lists hide
used to miss the visit, prefill Start from the pool place and write that
over the pin on a plain save, dropping the note too. MPlaceEditSheet now
resolves the visit from the stored assignments.
The header row is centred, so a one line name no longer hangs from the top
of the 34px disc.
"Tank runs out here" on the phone was a pink card with a black pill. It now
has the desktop band's design sized for a thumb: the mascot on its
skateboard and not enjoying it, a small uppercase warning, and the reserve
lamp as a 44px button. While a search runs or its offers show, the lamp
steps aside for a close (nothing in the band could clear the offer pins
before), and an empty answer leaves a retry.
Which control shows, which offers and which empty sentence is decided in
refuelBandState in refuelSuggestion.ts, next to the fuel and battery words.
The desktop RefuelBand reads the same helper now, with no visual change, so
the two shells hold markup only.
The head card read LEAVE 11:30 over a chain whose first stop is pinned at
10:00 with an hour and a half there. The figure was the departure from the
first stop, a clock no row prints, while ARRIVE was the last stop's arrival.
So the number was the wrong quantity and "Leave" the wrong word for it.
Both figures now come off the arrival column the rows print: START is the
first timed arrival (or the resume point on a morning after an automatic
night), ARRIVE is the last one. The rule lives in stageClocks in the shared
row model and reaches the tab as rt.clocks. The label is a new key,
mobileTrip.rtStart, because roadtrip.stay.leave keeps meaning a stop's own
departure in the stop and stay sheets. Both clocks carry dir=ltr like the
rows.
Two faults behind one round button on the phone map.
The base layer switcher that both engines draw in the bottom left corner
sat on top of the GL compass, which started 8px to its left and ran on
under the frosted shell, so it read as a second button showing through.
The compass now stands beside the switcher, placed off the switcher's own
exported inset and size so the two cannot drift apart again.
Satellite never drew on GL because applySatellite gave up whenever
isStyleLoaded() was false and only retried on styledata. That flag is false
while any source has tiles or a setData in flight, which on a phone is the
usual state, and styledata does not fire when those finish. On the road
trip stage every tap met a busy style, because the settings write
re-rendered the shell and handed the map fresh stage arrays. The guard is
gone (the pass only runs after load, and addSource/addLayer only refuse a
style document that is not in yet), an existing layer just flips its
visibility, and a source left without its layer still gets the layer.
The stage data in MMapArea is memoised, so a store write no longer refits
the camera or sets the route, access and place sources again.
A road trip tab on the mobile trip screen: the stage as a chain, the same
map underneath it, the sheets a passenger needs, and a search along the
route.
The addon was desktop only because road trip MODE is a data switch rather
than a view switch. It rewrites `assignments` and `places` for the whole
planner hook, and every mobile sheet is permanently mounted and reads those
same two lists, so turning it on there brought back documented regressions.
The mode flag is therefore untouched. A second flag, `roadtripFeedActive`,
feeds only the routing round and does it off the STORED assignments, so the
phone gets the drive without what the mode drags along with it.
The map is one instance shared by the plan tab and the road trip tab,
hoisted into a single JSX expression so React keeps it in the same position
and the WebGL context is never torn down on a tab switch.
The corridor search is scoped to what a phone can afford: a window of the
day rather than all of it, a smaller tile ceiling, a capped retry pass and a
deadline. The standard search is three requests where the desk makes
fifteen. The categories are deliberately not narrowed, because they all ride
one query per box, so a second one costs nothing.
Two gaps found while wiring it up are closed here as well. The fuel search
drew its offers nowhere on the phone, so the button did nothing visible;
they are in the dry band now, with the detour, the spare range and an accept
button. And the map credit opened as a two line ribbon across a screen the
map fills: both GL engines now start it collapsed, and Leaflet, which has no
collapsed mode of its own, is given one.
An unreleased migration has to survive being replayed on a schema where it
already applied — installs skip releases, and a test rewinds a fully migrated
database to the last released version to prove it. The bare ADD COLUMN threw
"duplicate column name" on that replay, which took every migration test down
with it.
Guard the ALTER on pragma_table_info, and add `source_assignment_id IS NULL`
to the backfill so a replay cannot re-resolve a row that has since followed
its stop to another day.
The trips e2e harness hand-builds a minimal journey_entries table rather than
running migrations, so it needs the column spelled out too.
The mobile shell printed place descriptions and notes as plain text while
the desktop rows and inspector run the same field through react-markdown,
so a description written with the formatting bar read as `# headings` and
`**asterisks**` on the phone.
Put the renderer in one shared component instead of copying it next to
each mobile twin, with a clamped variant for list rows that keeps them one
line high the way the desktop sidebar does. A clamped caption sits inside
the tappable row, so its links keep their text and lose the anchor.
Fixes#2337
Follow-up to #2379.
NOMINATIM_URL arrives from a compose file or a ConfigMap with whatever
whitespace was typed around it. The schema validates the trimmed string and
calls a blank one unset, the derivation did neither, so " " passed startup as
"use the default" and then became the base URL that cannot be fetched, and a
padded value lost every geocoding call the same way. It trims now, which is
also what the places client next door does with its own override.
The chart could not pass the variable at all: the ConfigMap is an allowlist and
an unknown key is dropped without a word, which is exactly the locked-down
cluster the override exists for.
The docs said what to set and not what it costs. They now say that it replaces
the public service with no fallback, that the endpoint has to speak the
Nominatim API, and that the one-per-second spacing stays either way, so nobody
stands up their own instance expecting it to run faster.
Test IDs follow the file again.
The release modal takes the 4.3.0 design: the release and its headline cards
on the left, the note and the support links on the right, at the design's own
size. The cards carry small drawings of the features instead of an icon.
The 4.0.0 entry is retired. In its place sits one entry, release-notes, that
every big release rewrites and keeps. It recurs per version with no upper
bound, so every user sees it once on each update, whatever they did with it
before, and a reload of the same version keeps it closed. An integration test
holds that promise through the real entry and the real dismiss route.
All 23 locales carry the new copy and drop the 4.0.0 strings.
Only the js-yaml entry changes. The Dependabot commit was built on main and rewrote the lockfile with another npm, which dropped the peer flag from 23 rollup entries and carried two wiki commits that dev does not have yet.
iconSize is a PointExpression, which has no x on its tuple form, so the client typecheck refused the size assertion; it now compares against L.point. The test ids follow the FE-PAGE-SHARED-MAP scheme in the order they run, and the comments around the cluster group say in a line what they said in a paragraph.
FE-PAGE-SHARED-040 already names the trip-wide marker colour case in the same file, so the new case moves to 042, and the comment above the clip says what it needs to in two lines.
The Atlas tooltip took both dates from the start dates of every trip with a
place in the country. One trip showed the month it began twice, the month it
ended never appeared, and a trip only booked could become the last visit of a
country already visited.
Both now come from the trips that give the country its status, places and
bookings alike: the start of the earliest and the end of the latest, with a
trip still under way ending today. The optimistic mark on the client clears the
dates the same way the server does.
The second label rendered the raw key atlas.lastVisitLabel since #1908 removed
it from the locales; the strings are back as they were. The month is built
from the date's digits now, because a 'YYYY-MM-DD' string parses as UTC and
showed the month before anywhere west of Greenwich.
Closes#1535
The sync engine keyed a skeleton by source_place_id alone, so a stop standing
on two days — the city you land in at dusk and walk through the next morning —
got one entry on the first of them and nothing on the rest.
Key on the day assignment instead. The assignment row rather than the day,
because moving a stop updates day_assignments.day_id in place: keyed this way
an entry follows the move instead of reading as one stop leaving the plan and
another arriving. Existing rows are backfilled to the place's earliest
assignment, and reconciliation adopts an unlinked row rather than annotating
it out from under its author.
Fixes#2329
FE-COMP-INTEGRATIONS-004, -015 and -016 took the first <code> and the first
Copy button on the tab and expected the MCP endpoint. Since the API keys card
shows the /api/v1 address with a copy button of its own (#2371), and it sits
above the MCP section, those queries landed on the API card: the URL read
/api/v1 and the click copied it. The cases now go through the endpoint's own
label.
The Atlas country check timed out. It asked Dawarich for a year of visited
cities in one request, and Dawarich computes that over every point in the
window with nothing cached, so a dense recorder never got under the 15 s the
server allows. The year is now asked for a month at a time, one request after
another, and folded back together. The windows sit a second apart because
Dawarich reads the bounds as inclusive.
The recorded route only appeared after a reload. Every Dawarich call from the
browser carried the shared 8 s timeout, so the browser gave up while the server
carried on and cached the answer for the next page load. Calls that make the
server talk to Dawarich now wait two minutes, the Atlas four. On the GL
renderers the draw also gave up whenever isStyleLoaded() was false, which it is
while any tile is still loading, and only retried on style.load. It now waits
for idle. The hazard overlay had the same guard and gets the same wait. The
pill shows a ring while the route loads, so a slow first fetch no longer looks
like "done, nothing there".
A collapsed day now takes its recorded route off the map, following the same
folds the planner already applies to places, the road trip sidebar's included.
The corridor searches the whole line a card draws, and a card that opens
with a drive from the day before (a night carried over, or the joined road
on connected days) draws that drive ahead of its first stop. The insert
index still came from insertIndexForAlong, which never answers 0, so a
charger found on that stretch was added after the first stop and the day
drove there, turned back to the charger and came the same way again.
insertIndexFor now answers 0 for a hit before the first stop when the card
arrives from an earlier stop, and dropping a hit on the map asks it instead
of computing its own index, so a click and a drop cannot disagree.
With connected days the drive from one day's last stop to the next day's
first is drawn at the head of the arriving card, in the colour of the day
before. anchorFor only knew that stretch as a night spill, so a click on it
anchored to the arriving card's first stop: the via was stored on the leg
after that stop, and the next day drove out to the point, turned and came
back, while the stretch that was clicked kept its shape.
assembleRoadtrip now names the stop that joined drive leaves from, and
anchorFor treats it like the stop a night drive left from. Placing and
dragging both resolve to the previous day's last stop, which is the anchor
the seam request already reads its vias from.
The section stacked a lonely button, a centred line and a small print hint
on top of each other, and the create dialog used bare browser checkboxes
that ignore the accent. The dialog now runs on the shared Modal with
selectable scope tiles, keys render as cards with their scopes as chips,
deletion goes through ConfirmDialog, and the endpoint sits in its own row
with a copy button.
Pressing Enter in the name field with every scope switched off used to
create a key: the empty list was dropped from the request and the server
stored it as a key that reads everything. Creation is now refused until at
least one scope is picked.
A failed list load no longer reads as "no keys yet", the create button
stops at the server's limit of ten keys, a refused clipboard says so, and
SQLite timestamps are parsed so Safari does not show Invalid Date.
The dialog built for this last round was its own thing and showed it: the
suggestion list was barely legible, clipped at the bottom, and never more
than two rows tall. It also lacked most of what the ordinary add-place form
has had for years.
So it is gone, and "Add manually" opens that form instead, in a service-stop
mode. The category control becomes the kind of stop and the time spent
there, the costs section is dropped, and an "Add between" row says where on
the drive it goes. Everything else comes along rather than being rebuilt:
the typed-ahead search with its source marks, the coordinate fields for a
charger no index knows, address, website, phone, notes, times, files and the
duplicate check. With the mode absent the form is the same component it was,
which its own suites still pin.
Where the stop lands is worked out when it is saved rather than when the
form opens, because the coordinate only exists once a place has been chosen.
One function answers both what the select shows and where the stop goes, so
the two cannot disagree, and the write goes through the same assignment path
as every other insert, via re-anchoring included: a stop pushed into a day
shifts every via anchored at or after it, and without re-anchoring first the
drawn road runs forward, doubles back and runs out again.
The select recommends rather than merely offering. Every leg of every routed
day is measured against the place separately and they are listed nearest
first, each with its own distance, so the preselected one visibly is the
closest and overruling it is an informed choice. The word they all shared
moved into the caption.
A stop with no position at all is not filed on a drive by guesswork. It
keeps its kind and goes to the trip's places, and the form says so and says
how to change it.
The case asserts no availability counter is shown for an ambiguous station, and
looked for one with an unanchored /\d+\/\d+/. The attribution line beside it ends
in the source's updatedAt run through toLocaleString(), and tests/setup.ts only
forces en-US on toLocaleDateString, so that timestamp reads "14.9.2026" on a
German machine and "9/14/2026" on the CI runner. The regex matched the second
one. Green where it was written, red on Linux, and red for a reason that has
nothing to do with charging.
Anchored at the start instead. Both places that print a count begin with it, so
the case still says what it meant to say.
"Add manually" did not fit beside "Search" and rendered as "Add manu…",
which is neither the label nor a shape anybody recognises.
The button face now carries one short word, with the full sentence kept as
its accessible name and its tooltip, so nothing is lost to a reader or a
pointer. Every locale got its own short form rather than a clipped version
of the long one: Selbst, A mano, Ručně, Elle, 手動.
Below two hundred pixels the row drops both words instead of shortening
them, and the two actions are their icons. The width is the row's own,
measured, not the window's: this column is resizable, so it can be narrow on
a wide screen and a media query would answer the wrong question.
The search button also stops restating the progress. Its label used to grow
into "Searching 3 of 12" while a run was on, which is the longest string in
the panel and the very sentence the progress row directly underneath already
prints next to the share as a figure. It keeps its word, disabled, with the
spinner in front of it.
Three panel changes and one new MCP tool that the pages did not describe
yet. Also records the two rules the code enforces and a reader would
otherwise have to discover: the charging panel is fetched once per opened
dialog rather than per row of a result list, and the lookup tool carries no
power rating or socket count because those are OpenStreetMap tag data that
travels with the corridor result instead.
The wiki syncs on a push to main, so this rides along until the next
release rather than appearing now.
Three things the first CI run found, all of them in the new tests rather
than in what they cover.
The dialog's search effect depended on the location hint object. Its own
hook memoises, so nothing looped in the app, but the effect sets state on a
query too short to ask about, and a caller whose hook hands back a fresh
literal per render turns that pair into a render loop that never yields. The
suite mocked it exactly that way, and the worker hung before a single test
reported, which is what took the client coverage job past half an hour. The
hint is three numbers, so the effect now turns on those and reads the value
out of a ref when the request goes out. The mock hands back one object, the
way the real hook does.
The suite also installed fake timers in a beforeEach, which deadlocks
against React's scheduler and Testing Library's own waiting. Every wait is
a waitFor now, and the two cases that have to prove something did not
happen sit out a real pause. The debounce boundary is no longer asserted
against a wall clock, because a busy runner stretches any such window.
The charging fixtures are pinned to a fixed instant and the service reads
the real clock against a twenty-minute freshness window, so every answer
through it was stale by construction and available came back null. Date.now
is pinned for those tests, never the timers, since the requests carry an
AbortSignal.timeout that has to keep running.
And the unidentified-station test counted its two "no reliable data" lines
before the answer landed: the price line already says it while the request
is out, so the count settled on one and passed for the wrong reason.
A tester found the charging panel once a station was on the trip and asked
for it while still deciding. The availability and the published tariffs were
reachable only for a saved place: the route takes a places id, and a hit
found along the route has no row yet.
ChargingService.load already needed nothing but a coordinate and a name, so
it now has a public method that says so, behind a trip-scoped route with the
same guard stack, a Zod contract in shared, and the parallel MCP tool in this
same change. Same service, same caches, so a station looked at in the dialog
and then added keys the entry already fetched. Trip-scoped even though the
trip is not part of the question: without :tripId the trip access guard goes
too, and what is left is an open proxy in front of somebody else's public API.
It renders in the add dialog, and only while the selected kind is charging,
so a fuel or food stop costs nothing and one opened dialog is one lookup.
Deliberately not per result row: the corridor search publishes box by box,
every mounted panel owns a refresh timer, a cache miss can cost seven
upstream requests, and a station in a dense charging park is the case the
upstream matcher refuses as ambiguous.
Power and socket counts are not in this answer and were not asked of it.
They are OSM tag data and already ride along on the corridor row for free.
Four things testers asked for in the "Along the route" panel.
Add manually. The corridor search reads OpenStreetMap, and a good share of
the chargers standing at a motorway junction are not in it, Tesla
Superchargers among them. The way round it was to leave road trip mode, add
the place under Days, drag it onto the right day, come back and mark it a
charging stop. The Search button now shares its row with a second one that
asks the two questions those four steps answered: which place, and where on
the drive. The place comes from a debounced typeahead over the place search;
the position from anchorFor, the same projection a via is placed with, and
it is offered as a dropdown of every leg of every routed day so it can be
overridden. Unlike a via, a place far from the drawn line is not refused,
only flagged: that place is the reason this dialog exists. From there it
hands over to the stop popup a corridor hit already goes through, so the
kind and the dwell are decided once for both paths and the write stays
saveStopDraft.
Clear results. A search that turned up the wrong thing left its hits in the
list and its pins on the map, and the only way out was switching to the day
plan and back. The search hook has exposed a clear() since it was written
and nothing ever called it. A control in the results header does now, and
takes the four narrowing states with it, because they were set for a
question that no longer has an answer.
Charging as the default for an electric car. "Looking for" opened on Fuel
whatever the vehicle. It opens on Charging when the trip's vehicle is
electric, and is unchanged for combustion, for an empty value and for a
vehicle nobody set, so nothing moves for anybody who never opened the
dialog. Seeded once, never over a category the traveller picked or a search
in flight.
Clicking a result moves the map to it. The row had no click handler at all;
only the trailing Add button did anything. The badge and the text are one
activatable target with that button as its sibling, which keeps the li a
list item and avoids a button inside a button, and it goes through the same
focusRoadtripPoint the rail uses, which closes the refuel and alternatives
panels first because those outrank the camera.
The ways of driving one leg come from OSRM, except the toll-free or
motorway-free offer beside them: the shipped OSRM hosts are built without
excludable road classes and answer exclude= with HTTP 400, so that one is
asked of the avoidance router instead.
Their figures were then read against each other. The quickest was elected
across both, which is what decides the road drawn as the one being driven,
and every other road was labelled with how far behind that election it sat.
The two engines agree on the road to a tenth of a percent and not at all on
how fast it may be driven: over twelve European legs the per-leg time ran
from 14.7 % under OSRM's to 13.2 % over, with the sign following the region.
On a Spanish motorway leg that gap alone is enough to crown a toll-free
detour and call the motorway somebody is on the slow way round.
An offer now carries the engine that timed it. It takes no part in electing
the quickest, no difference is printed across the two, and the bar says where
the figure came from. Each route still reports its own time; only the
subtraction is refused. An instance running its own OSRM through the MLD
pipeline answers exclude itself, so there both figures are one engine's and
the comparison works exactly as before.
Dawarich landed on dev untested, which is why release PR #2273 reads 79.0% on
SonarCloud's 80% new-code gate: 1352 of the release's 4610 uncovered units are
Dawarich's own. 946 cases across 30 files take the surface to 100% in shared,
99.7 in server and 99.6 in client, and the gate to roughly 85%.
What stays uncovered is thirteen type-narrowing guards and defensive fallbacks
the only caller cannot reach, each argued in the file beside it rather than
forced with a cast. No source, config or coverage threshold is touched.
remove and removeMany report what the nights they cancelled took down with
them, so the stubs in the controller and plugin-RPC suites report it too. Plus
a case for the announcement itself, which had none: place:deleted says nothing
about a partner booking or an expense linked by reservation_id.
noUncheckedIndexedAccess makes every index access optional, DriveLimits wants
its two minute ceilings named even when they are null, and the distance unit is
metric/imperial rather than a unit label.
FE-PAGE-JOURNEYDETAIL-105 still looked for accept="image/*" on the editor's
file input after it learned to take video (#2341), which is the one red test on
dev. The camera input beside it stays image-only and the test says why.
deriveDriveWarnings takes a two-slot "does this stop refuel" pair, slot 0 for
the stop a leg leaves and slot 1 for the stop it reaches, and the assembler
hard-coded slot 1 to false. The suppression the model was written and tested
for could therefore never fire through it: a day that reaches a charger 700 km
in reported running dry at the charger, and a run of warnings that should
collapse to one stayed at full length. Pinned by a spec of its own now, since
the wrapper had none.
The server's plan built each leg by spreading the whole run's segment and then
overriding only its metres and seconds, so every leg of a multi-stop run
carried the run's distance text, its duration text and its polyline midpoint:
leg one of a 480 km day reported 100 km with "480 km" printed beside it. The
four texts and the midpoint are per leg now, in the reader's own unit rather
than the router's hard-coded kilometres, which also ends a response that mixed
miles in its day labels with kilometres in its legs.
Choosing another road on a leg that already carried a via appended the new
point behind the old one, so the day drove south to the first and north to the
second: a zigzag matching neither the line drawn under the button nor the
distance printed on it. The alternatives are computed for the two bare
endpoints, so the write has to replace the leg, which is what the direct branch
beside it already did.
A day's vias were only loaded while road-trip mode was being looked at, and the
three handlers that re-anchor them after a stop is added, removed or reordered
are reachable from the place inspector in both modes. With the switch off they
computed their correction from an empty list and wrote nothing, so a deleted
stop left the detour on a leg nobody chose, for the traveller and for every
collaborator. They are loaded whenever the addon is on now.
Seam routing paced itself by sleeping after each request, and storing a result
shortened the key its own effect depends on: React tore the effect down
mid-sleep, the cleanup aborted it, and the next request went out immediately.
Thirteen seams left at round-trip speed, the shared routing hosts refused the
tail, and a refused seam changes no state so nothing ever retried it. The wait
now happens before the request, against a clock that outlives the effect.
The "avoidance not honoured" badge could never appear on the rail: the field
behind it was published every round and never written. Only the second engine
reports what it achieved against what was asked, and the rail plans in the
browser, so it never saw the server's own copy — a motorway crossing read as a
motorway-free drive.
Two smaller ones. `trip.toast.loadError` has been called since the first commit
and exists in no locale, so both call sites printed the key itself; it is
written now in all 23. And the phone shell honoured the road-trip session flag
while having no rail, no drive lines and no switch to leave it, so narrowing a
desktop window took the trip overview away and listed every booked night twice.
Maurice